From: Jerome Brunet <jbrunet@baylibre.com>
To: Stephen Boyd <sboyd@kernel.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>,
Kevin Hilman <khilman@baylibre.com>,
"linux-clk@vger.kernel.org" <linux-clk@vger.kernel.org>,
"linux-amlogic@lists.infradead.org"
<linux-amlogic@lists.infradead.org>,
Philipp Zabel <p.zabel@pengutronix.de>
Subject: [GIT PULL] clk: meson: amlogic clock updates for v6.13
Date: Wed, 06 Nov 2024 15:28:57 +0100 [thread overview]
Message-ID: <1jy11w307q.fsf@starbuckisacylon.baylibre.com> (raw)
Hi Stephen,
Here is the Amlogic clock update for v6.13.
This is one is a bit out of the ordinary. You'll notice a fair amount
change in drivers/reset. We completed the rework to take the resets of
the axg controller out of drivers/clk/meson. This code will now be
maintained where it belongs. This will also allow to not duplicate reset
driver with the new audio clock controllers coming up.
The reset change present in this PR come from the following tag provided
by Philipp:
https://git.pengutronix.de/cgit/pza/linux/tag/?h=reset-amlogic-aux
One of the change present in this PR depends on these reset changes
which is why I pulled it.
The rest of the PR is business as usual.
The following changes since commit 9852d85ec9d492ebef56dc5f229416c925758edc:
Linux 6.12-rc1 (2024-09-29 15:06:19 -0700)
are available in the Git repository at:
https://github.com/BayLibre/clk-meson.git tags/clk-meson-v6.13-1
for you to fetch changes up to 664988eb47dd2d6ae1d9e4188ec91832562f8f26:
clk: amlogic: axg-audio: use the auxiliary reset driver (2024-10-14 10:11:05 +0200)
----------------------------------------------------------------
Amlogic clock updates for v6.13
* Fix hifi_pll rate calculation on s4 and c3
* Move audio reset implementation from the axg-audio clock controller
driver to the reset directory, using the auxiliary device bus.
* Remove the unnecessary spinlock in the mpll driver
* Fix meson8 clock controller DT bindings
----------------------------------------------------------------
Chuan Liu (5):
clk: meson: s4: pll: hifi_pll support fractional multiplier
clk: meson: Support PLL with fixed fractional denominators
clk: meson: c3: pll: fix frac maximum value for hifi_pll
clk: meson: s4: pll: fix frac maximum value for hifi_pll
clk: meson: mpll: Delete a useless spinlock from the MPLL
Jerome Brunet (14):
clk: meson: meson8b: remove spinlock
Merge tag 'v6.12-rc1' into clk-meson-next
Merge branch 'v6.13/bindings' into clk-meson-next
reset: amlogic: convert driver to regmap
reset: amlogic: use generic data matching function
reset: amlogic: make parameters unsigned
reset: amlogic: add driver parameters
reset: amlogic: use reset number instead of register count
reset: amlogic: add reset status support
reset: amlogic: move drivers to a dedicated directory
reset: amlogic: split the device core and platform probe
reset: amlogic: add auxiliary reset driver support
Merge tag 'reset-amlogic-aux' into clk-meson-next
clk: amlogic: axg-audio: use the auxiliary reset driver
Neil Armstrong (1):
dt-bindings: clock: convert amlogic,meson8b-clkc.txt to dtschema
Philipp Zabel (1):
reset: amlogic: Fix small whitespace issue
.../bindings/clock/amlogic,meson8-clkc.yaml | 45 ++++++
.../bindings/clock/amlogic,meson8b-clkc.txt | 51 -------
drivers/clk/meson/Kconfig | 1 +
drivers/clk/meson/axg-audio.c | 109 ++------------
drivers/clk/meson/axg.c | 6 -
drivers/clk/meson/c3-pll.c | 1 +
drivers/clk/meson/clk-mpll.c | 11 --
drivers/clk/meson/clk-mpll.h | 1 -
drivers/clk/meson/clk-pll.c | 8 +-
drivers/clk/meson/clk-pll.h | 1 +
drivers/clk/meson/g12a.c | 6 -
drivers/clk/meson/gxbb.c | 6 -
drivers/clk/meson/meson8b.c | 10 --
drivers/clk/meson/s4-pll.c | 13 +-
drivers/reset/Kconfig | 15 +-
drivers/reset/Makefile | 3 +-
drivers/reset/amlogic/Kconfig | 27 ++++
drivers/reset/amlogic/Makefile | 4 +
.../reset/{ => amlogic}/reset-meson-audio-arb.c | 0
drivers/reset/amlogic/reset-meson-aux.c | 136 ++++++++++++++++++
drivers/reset/amlogic/reset-meson-common.c | 142 ++++++++++++++++++
drivers/reset/amlogic/reset-meson.c | 105 ++++++++++++++
drivers/reset/amlogic/reset-meson.h | 28 ++++
drivers/reset/reset-meson.c | 159 ---------------------
include/soc/amlogic/reset-meson-aux.h | 23 +++
25 files changed, 535 insertions(+), 376 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/amlogic,meson8-clkc.yaml
delete mode 100644 Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt
create mode 100644 drivers/reset/amlogic/Kconfig
create mode 100644 drivers/reset/amlogic/Makefile
rename drivers/reset/{ => amlogic}/reset-meson-audio-arb.c (100%)
create mode 100644 drivers/reset/amlogic/reset-meson-aux.c
create mode 100644 drivers/reset/amlogic/reset-meson-common.c
create mode 100644 drivers/reset/amlogic/reset-meson.c
create mode 100644 drivers/reset/amlogic/reset-meson.h
delete mode 100644 drivers/reset/reset-meson.c
create mode 100644 include/soc/amlogic/reset-meson-aux.h
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
reply other threads:[~2024-11-06 14:30 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1jy11w307q.fsf@starbuckisacylon.baylibre.com \
--to=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=p.zabel@pengutronix.de \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox