From: jbrunet@baylibre.com (Jerome Brunet)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH v2 1/4] arm64: dts: meson: remove extra subnode in mmc clk_gate pinmux
Date: Fri, 9 Nov 2018 15:04:42 +0100 [thread overview]
Message-ID: <20181109140445.17795-2-jbrunet@baylibre.com> (raw)
In-Reply-To: <20181109140445.17795-1-jbrunet@baylibre.com>
In the pinmux of the mmc clk_gate nodes, we define 2 subnodes. One for
the function definition, the other for the bias. This is not necessary
since we can define the function and the bias in the same subnode.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 6 ------
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 9 ---------
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 9 ---------
3 files changed, 24 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index eb46db001ce0..e86f5f721f8f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -280,9 +280,6 @@
mux {
groups = "BOOT_8";
function = "gpio_periphs";
- };
- cfg-pull-down {
- pins = "BOOT_8";
bias-pull-down;
};
};
@@ -513,9 +510,6 @@
mux {
groups = "GPIOX_4";
function = "gpio_periphs";
- };
- cfg-pull-down {
- pins = "GPIOX_4";
bias-pull-down;
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 524f533e41d4..1cb8e7e0d0da 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -377,9 +377,6 @@
mux {
groups = "BOOT_8";
function = "gpio_periphs";
- };
- cfg-pull-down {
- pins = "BOOT_8";
bias-pull-down;
};
};
@@ -426,9 +423,6 @@
mux {
groups = "CARD_2";
function = "gpio_periphs";
- };
- cfg-pull-down {
- pins = "CARD_2";
bias-pull-down;
};
};
@@ -449,9 +443,6 @@
mux {
groups = "GPIOX_4";
function = "gpio_periphs";
- };
- cfg-pull-down {
- pins = "GPIOX_4";
bias-pull-down;
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 8ccab9a1ebcc..7cfee40d89e9 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -324,9 +324,6 @@
mux {
groups = "BOOT_8";
function = "gpio_periphs";
- };
- cfg-pull-down {
- pins = "BOOT_8";
bias-pull-down;
};
};
@@ -373,9 +370,6 @@
mux {
groups = "CARD_2";
function = "gpio_periphs";
- };
- cfg-pull-down {
- pins = "CARD_2";
bias-pull-down;
};
};
@@ -396,9 +390,6 @@
mux {
groups = "GPIOX_4";
function = "gpio_periphs";
- };
- cfg-pull-down {
- pins = "GPIOX_4";
bias-pull-down;
};
};
--
2.19.1
next prev parent reply other threads:[~2018-11-09 14:04 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-09 14:04 [PATCH v2 0/4] ARM: dts: meson: set pinmux bias Jerome Brunet
2018-11-09 14:04 ` Jerome Brunet [this message]
2018-11-09 14:04 ` [PATCH v2 2/4] arm64: dts: meson: disable pad bias for mmc pinmuxes Jerome Brunet
2018-11-09 14:04 ` [PATCH v2 3/4] arm64: dts: meson: consistently disable pin bias Jerome Brunet
2018-11-09 14:04 ` [PATCH v2 4/4] ARM: " Jerome Brunet
2018-11-16 6:45 ` Martin Blumenstingl
2018-11-29 0:44 ` Kevin Hilman
2018-11-15 20:22 ` [PATCH v2 0/4] ARM: dts: meson: set pinmux bias Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181109140445.17795-2-jbrunet@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox