From mboxrd@z Thu Jan 1 00:00:00 1970 From: narmstrong@baylibre.com (Neil Armstrong) Date: Fri, 23 Nov 2018 15:02:21 +0100 Subject: [PATCH RFC 8/8] drm/meson: Output in YUV444 if sink supports it In-Reply-To: <20181123140221.15700-1-narmstrong@baylibre.com> References: <20181123140221.15700-1-narmstrong@baylibre.com> Message-ID: <20181123140221.15700-9-narmstrong@baylibre.com> To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org With the YUV420 handling, we can dynamically setup the HDMI output pixel format depending on the mode and connector info. So now, we can output in YUV444, which is the native video pipeline format, directly to the HDMI Sink if it's supported without necessarily involving the HDMI Controller CSC. Signed-off-by: Neil Armstrong --- drivers/gpu/drm/meson/meson_dw_hdmi.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c index 0b9ecbfe65b4..6df124c1bba5 100644 --- a/drivers/gpu/drm/meson/meson_dw_hdmi.c +++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c @@ -670,7 +670,10 @@ static int meson_venc_hdmi_encoder_atomic_check(struct drm_encoder *encoder, dw_hdmi->output_bus_format = MEDIA_BUS_FMT_UYYVYY8_0_5X24; } else { dw_hdmi->input_bus_format = MEDIA_BUS_FMT_YUV8_1X24; - dw_hdmi->output_bus_format = MEDIA_BUS_FMT_RGB888_1X24; + if (info->color_formats & DRM_COLOR_FORMAT_YCRCB444) + dw_hdmi->output_bus_format = MEDIA_BUS_FMT_YUV8_1X24; + else + dw_hdmi->output_bus_format = MEDIA_BUS_FMT_RGB888_1X24; } return 0; -- 2.19.1