From: Neil Armstrong <narmstrong@baylibre.com>
To: daniel@ffwll.ch
Cc: linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
dri-devel@lists.freedesktop.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH 0/6] drm/meson: add support for AXG & MIPI-DSI
Date: Mon, 7 Sep 2020 10:18:19 +0200 [thread overview]
Message-ID: <20200907081825.1654-1-narmstrong@baylibre.com> (raw)
The Amlogic AXG SoC family has a downgraded VPU with the following
changes :
- Only a single OSD plane, no overlay video plane
- The primary plane doesn't support HW scaling
- The pixels are read directly from DDR without any Canvas module
- Doesn't support HDMI or CVBS
- Ouputs only with ENCL encoder to a DPI-to-DSI Synopsys DW-MIPI-DSI transceiver
The Amlogic AXg SoCs embeds a Synopsys DW-MIPI-DSI transceiver (ver 1.21a), with a custom
glue managing the IP resets, clock and data input similar to the DW-HDMI Glue on other
Amlogic SoCs.
This adds support for the Glue managing the transceiver, mimicing the init flow provided
by Amlogic to setup the ENCl encoder, the glue, the transceiver, the digital D-PHY and the
Analog PHY in the proper way.
The DW-MIPI-DSI transceiver + D-PHY are directly clocked by the VCLK2 clock, which pixel clock
is derived and feeds the ENCL encoder and the VIU pixel reader.
An optional "MEAS" clock can be enabled to measure the delay between each vsync feeding the
DW-MIPI-DSI transceiver.
Neil Armstrong (6):
dt-bindings: display: amlogic,meson-vpu: add bindings for VPU found in
AXG SoCs
dt-bindings: display: add Amlogic MIPI DSI Host Controller bindings
drm/meson: add support for VPU found in AXG SoCs
drm/meson: venc: add ENCL encoder setup for MIPI-DSI output
drm/meson: remove useless recursive components matching
drm/meson: add support for MIPI-DSI transceiver
.../display/amlogic,meson-dw-mipi-dsi.yaml | 115 ++++
.../bindings/display/amlogic,meson-vpu.yaml | 36 +-
drivers/gpu/drm/meson/Kconfig | 7 +
drivers/gpu/drm/meson/Makefile | 1 +
drivers/gpu/drm/meson/meson_crtc.c | 8 +-
drivers/gpu/drm/meson/meson_drv.c | 163 ++---
drivers/gpu/drm/meson/meson_drv.h | 10 +-
drivers/gpu/drm/meson/meson_dw_mipi_dsi.c | 562 ++++++++++++++++++
drivers/gpu/drm/meson/meson_plane.c | 74 ++-
drivers/gpu/drm/meson/meson_registers.h | 1 +
drivers/gpu/drm/meson/meson_venc.c | 230 ++++++-
drivers/gpu/drm/meson/meson_venc.h | 6 +
drivers/gpu/drm/meson/meson_viu.c | 50 +-
drivers/gpu/drm/meson/meson_vpp.c | 6 +-
drivers/gpu/drm/meson/meson_vpp.h | 2 +
15 files changed, 1176 insertions(+), 95 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/amlogic,meson-dw-mipi-dsi.yaml
create mode 100644 drivers/gpu/drm/meson/meson_dw_mipi_dsi.c
--
2.22.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next reply other threads:[~2020-09-07 8:18 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-07 8:18 Neil Armstrong [this message]
2020-09-07 8:18 ` [PATCH 1/6] dt-bindings: display: amlogic, meson-vpu: add bindings for VPU found in AXG SoCs Neil Armstrong
2020-09-15 15:34 ` [PATCH 1/6] dt-bindings: display: amlogic,meson-vpu: " Rob Herring
2020-09-07 8:18 ` [PATCH 2/6] dt-bindings: display: add Amlogic MIPI DSI Host Controller bindings Neil Armstrong
2020-09-15 15:41 ` Rob Herring
2020-09-15 16:28 ` Neil Armstrong
2020-09-07 8:18 ` [PATCH 3/6] drm/meson: add support for VPU found in AXG SoCs Neil Armstrong
2020-09-07 8:18 ` [PATCH 4/6] drm/meson: venc: add ENCL encoder setup for MIPI-DSI output Neil Armstrong
2020-09-07 8:18 ` [PATCH 5/6] drm/meson: remove useless recursive components matching Neil Armstrong
2020-09-07 8:18 ` [PATCH 6/6] drm/meson: add support for MIPI-DSI transceiver Neil Armstrong
2020-09-07 8:43 ` Daniel Vetter
2020-09-07 8:44 ` Daniel Vetter
2020-09-07 9:03 ` Neil Armstrong
2020-09-07 18:03 ` Daniel Vetter
2020-09-08 8:06 ` Neil Armstrong
2020-09-08 8:46 ` Daniel Vetter
2020-09-17 7:14 ` Neil Armstrong
2020-09-17 11:32 ` Daniel Vetter
2022-01-12 7:24 ` Jagan Teki
2022-01-12 8:19 ` Neil Armstrong
2022-01-20 11:03 ` Jagan Teki
2022-01-20 13:28 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200907081825.1654-1-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox