linux-amlogic.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Liang Yang <liang.yang@amlogic.com>
To: Miquel Raynal <miquel.raynal@bootlin.com>,
	<linux-mtd@lists.infradead.org>
Cc: Liang Yang <liang.yang@amlogic.com>,
	Rob Herring <robh+dt@kernel.org>,
	Richard Weinberger <richard@nod.at>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Jerome Brunet <jbrunet@baylibre.com>,
	Neil Armstrong <narmstrong@baylibre.com>,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	Kevin Hilman <khilman@baylibre.com>,
	Jianxin Pan <jianxin.pan@amlogic.com>,
	Victor Wan <victor.wan@amlogic.com>,
	XianWei Zhao <xianwei.zhao@amlogic.com>,
	Kelvin Zhang <kelvin.zhang@amlogic.com>,
	BiChao Zheng <bichao.zheng@amlogic.com>,
	YongHui Yu <yonghui.yu@amlogic.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-amlogic@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH v3 2/2] dt-bindings: nand: meson: refine Amlogic NAND controller driver
Date: Fri, 18 Mar 2022 20:41:20 +0800	[thread overview]
Message-ID: <20220318124121.26117-3-liang.yang@amlogic.com> (raw)
In-Reply-To: <20220318124121.26117-1-liang.yang@amlogic.com>

convert txt to yaml and refine the meson NFC clock document.

Signed-off-by: Liang Yang <liang.yang@amlogic.com>
---
 .../bindings/mtd/amlogic,meson-nand.txt       | 60 ----------------
 .../bindings/mtd/amlogic,meson-nand.yaml      | 71 +++++++++++++++++++
 2 files changed, 71 insertions(+), 60 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
 create mode 100644 Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml

diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
deleted file mode 100644
index 5794ab1147c1..000000000000
--- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
-
-This file documents the properties in addition to those available in
-the MTD NAND bindings.
-
-Required properties:
-- compatible : contains one of:
-  - "amlogic,meson-gxl-nfc"
-  - "amlogic,meson-axg-nfc"
-- clocks     :
-	A list of phandle + clock-specifier pairs for the clocks listed
-	in clock-names.
-
-- clock-names: Should contain the following:
-	"core" - NFC module gate clock
-	"device" - device clock from eMMC sub clock controller
-	"rx" - rx clock phase
-	"tx" - tx clock phase
-
-- amlogic,mmc-syscon	: Required for NAND clocks, it's shared with SD/eMMC
-				controller port C
-
-Optional children nodes:
-Children nodes represent the available nand chips.
-
-Other properties:
-see Documentation/devicetree/bindings/mtd/nand-controller.yaml for generic bindings.
-
-Example demonstrate on AXG SoC:
-
-	sd_emmc_c_clkc: mmc@7000 {
-		compatible = "amlogic,meson-axg-mmc-clkc", "syscon";
-		reg = <0x0 0x7000 0x0 0x800>;
-	};
-
-	nand-controller@7800 {
-		compatible = "amlogic,meson-axg-nfc";
-		reg = <0x0 0x7800 0x0 0x100>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
-
-		clocks = <&clkc CLKID_SD_EMMC_C>,
-			<&sd_emmc_c_clkc CLKID_MMC_DIV>,
-			<&sd_emmc_c_clkc CLKID_MMC_PHASE_RX>,
-			<&sd_emmc_c_clkc CLKID_MMC_PHASE_TX>;
-		clock-names = "core", "device", "rx", "tx";
-		amlogic,mmc-syscon = <&sd_emmc_c_clkc>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&nand_pins>;
-
-		nand@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			nand-on-flash-bbt;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
new file mode 100644
index 000000000000..4de4962a40b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,mmc-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
+
+maintainers:
+  - liang.yang@amlogic.com
+
+properties:
+  compatible:
+    enum:
+      - "amlogic,meson-gxl-nfc"
+      - "amlogic,meson-axg-nfc"
+
+  reg:
+    maxItems: 2
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: "core", "device"
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    nand-controller@7800 {
+	compatible = "amlogic,meson-axg-nfc";
+	reg = <0x0 0x7800 0x0 0x100>,
+	      <0x0 0x7000 0x0 0x800>;
+        reg-names = "nfc", "emmc";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
+
+	clocks = <&clkc CLKID_SD_EMMC_C>,
+		<&clkc CLKID_FCLK_DIV2>;
+	clock-names = "core", "device";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins>;
+
+	nand@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-on-flash-bbt;
+	};
+     };
+
+...
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  parent reply	other threads:[~2022-03-18 12:42 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-18 12:41 [PATCH v3 0/2] refine the NFC clock framework Liang Yang
2022-03-18 12:41 ` [PATCH v3 1/2] mtd: rawnand: meson: discard the common MMC sub " Liang Yang
2022-03-18 14:02   ` Neil Armstrong
2022-03-19  6:18     ` Liang.Yang
2022-03-21  5:15   ` kernel test robot
2022-03-18 12:41 ` Liang Yang [this message]
2022-03-18 13:59   ` [PATCH v3 2/2] dt-bindings: nand: meson: refine Amlogic NAND controller driver Neil Armstrong
2022-03-19  6:17     ` Liang.Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220318124121.26117-3-liang.yang@amlogic.com \
    --to=liang.yang@amlogic.com \
    --cc=bichao.zheng@amlogic.com \
    --cc=jbrunet@baylibre.com \
    --cc=jianxin.pan@amlogic.com \
    --cc=kelvin.zhang@amlogic.com \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=narmstrong@baylibre.com \
    --cc=richard@nod.at \
    --cc=robh+dt@kernel.org \
    --cc=victor.wan@amlogic.com \
    --cc=vigneshr@ti.com \
    --cc=xianwei.zhao@amlogic.com \
    --cc=yonghui.yu@amlogic.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).