From: Anand Moon <linux.amoon@gmail.com>
Cc: linux-amlogic@lists.infradead.org,
Matthias Kaehlcke <mka@chromium.org>,
Alexander Stein <alexander.stein@ew.tq-group.com>,
Johan Hovold <johan@kernel.org>
Subject: [PATCH v3 0/9] Used onboard HUB to reset and add power to hub
Date: Sat, 21 Jan 2023 17:56:28 +0000 [thread overview]
Message-ID: <20230121175639.12818-1-linux.amoon@gmail.com> (raw)
Amlogic board use gpio-hog to reset the USB hub.
so using onboard hub we could reset the USB hub and
also enable power to the USB hub.
v3: Fix some small changes in $subject
address the input from Neil
fix the vialab device tree binding as per Krzysztof inputs.
v2: Odroid C1 / C2 : usb hub reset working as expected.
Odroid N2 : dropped usb hub changes, since my board USB hub
is hitting regression.
Odroid C4 : Fix the device tree binding and used peer-hub for
usb2.0 and usb3.0 hub.
[1] https://lore.kernel.org/all/20230118044418.875-10-linux.amoon@gmail.com
v1: Odroid C1 / C2 : were not working as expected.
Odroid N2 : used single USB 3.0 hub reset.
Odroid C4 : used single USB 3.0 hub reset.
[0] https://patchwork.kernel.org/project/linux-amlogic/list/?series=707292
Any inputs for these changes ?
Thanks
-Anand
Anand Moon (9):
dt-bindings: usb: Add device id for Genesys Logic hub controller
ARM: dts: amlogic: Used onboard usb hub reset on odroid c1
arm64: dts: amlogic: Used onboard usb hub reset on odroid c2
usb: misc: onboard_usb_hub: add Genesys Logic GL852G hub support
vendor-prefixes: Add VIA Labs, Inc.
dt-bindings: usb: Add Via lab VL817 hub
arm64: dts: amlogic: Used onboard usb hub reset on odroid c4
usb: misc: onboard_usb_hub: add VIA LAB VL817 hub support
arm64: defconfig: Enable USB onboard HUB driver
.../bindings/usb/genesys,gl850g.yaml | 1 +
.../devicetree/bindings/usb/vialab,vl817.yaml | 71 +++++++++++++++++++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/arm/boot/dts/meson8b-odroidc1.dts | 23 +++---
.../boot/dts/amlogic/meson-gxbb-odroidc2.dts | 25 +++----
.../boot/dts/amlogic/meson-sm1-odroid-c4.dts | 33 +++++----
arch/arm64/configs/defconfig | 1 +
drivers/usb/misc/onboard_usb_hub.c | 4 ++
drivers/usb/misc/onboard_usb_hub.h | 11 +++
9 files changed, 131 insertions(+), 40 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/vialab,vl817.yaml
--
2.38.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next reply other threads:[~2023-01-21 17:57 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-21 17:56 Anand Moon [this message]
2023-01-21 17:56 ` [PATCH v3 1/9] dt-bindings: usb: Add device id for Genesys Logic hub controller Anand Moon
2023-01-25 14:34 ` Greg Kroah-Hartman
2023-01-25 14:41 ` Anand Moon
2023-01-21 17:56 ` [PATCH v3 2/9] ARM: dts: amlogic: Used onboard usb hub reset on odroid c1 Anand Moon
2023-01-21 17:56 ` [PATCH v3 3/9] arm64: dts: amlogic: Used onboard usb hub reset on odroid c2 Anand Moon
2023-08-02 21:06 ` Ben Wolsieffer
2023-08-05 21:30 ` Krzysztof Kozlowski
2023-08-06 0:05 ` Ben Wolsieffer
2023-08-06 4:03 ` Anand Moon
2023-01-21 17:56 ` [PATCH v3 4/9] usb: misc: onboard_usb_hub: add Genesys Logic GL852G hub support Anand Moon
2023-01-21 17:56 ` [PATCH v3 5/9] vendor-prefixes: Add VIA Labs, Inc Anand Moon
2023-01-21 18:51 ` Krzysztof Kozlowski
2023-01-22 7:04 ` Anand Moon
2023-01-22 9:36 ` Krzysztof Kozlowski
2023-01-22 16:38 ` Anand Moon
2023-01-21 17:56 ` [PATCH v3 6/9] dt-bindings: usb: Add Via lab VL817 hub Anand Moon
2023-01-21 18:52 ` Krzysztof Kozlowski
2023-01-21 17:56 ` [PATCH v3 7/9] arm64: dts: amlogic: Used onboard usb hub reset on odroid c4 Anand Moon
2023-01-21 17:56 ` [PATCH v3 8/9] usb: misc: onboard_usb_hub: add VIA LAB VL817 hub support Anand Moon
2023-01-21 17:56 ` [PATCH v3 9/9] arm64: defconfig: Enable USB onboard HUB driver Anand Moon
2023-01-22 10:27 ` [PATCH v3 0/9] Used onboard HUB to reset and add power to hub Neil Armstrong
2023-01-22 16:36 ` Anand Moon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230121175639.12818-1-linux.amoon@gmail.com \
--to=linux.amoon@gmail.com \
--cc=alexander.stein@ew.tq-group.com \
--cc=johan@kernel.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=mka@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox