From: Jerome Brunet <jbrunet@baylibre.com>
To: "Thierry Reding" <thierry.reding@gmail.com>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Neil Armstrong" <neil.armstrong@linaro.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Conor Dooley" <conor+dt@kernel.org>
Cc: Jerome Brunet <jbrunet@baylibre.com>,
Kevin Hilman <khilman@baylibre.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-amlogic@lists.infradead.org, linux-pwm@vger.kernel.org,
JunYi Zhao <junyi.zhao@amlogic.com>
Subject: [PATCH v4 5/6] pwm: meson: don't carry internal clock elements around
Date: Fri, 22 Dec 2023 12:16:53 +0100 [thread overview]
Message-ID: <20231222111658.832167-6-jbrunet@baylibre.com> (raw)
In-Reply-To: <20231222111658.832167-1-jbrunet@baylibre.com>
Pointers to the internal clock elements of the PWM are useless
after probe. There is no need to carry this around in the device
data. Just let devres deal with it.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
drivers/pwm/pwm-meson.c | 67 ++++++++++++++++++++++++-----------------
1 file changed, 39 insertions(+), 28 deletions(-)
diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
index 15c44185d784..fb113bc8da29 100644
--- a/drivers/pwm/pwm-meson.c
+++ b/drivers/pwm/pwm-meson.c
@@ -90,9 +90,6 @@ struct meson_pwm_channel {
unsigned int hi;
unsigned int lo;
- struct clk_mux mux;
- struct clk_divider div;
- struct clk_gate gate;
struct clk *clk;
};
@@ -442,6 +439,13 @@ static int meson_pwm_init_channels(struct device *dev)
struct meson_pwm_channel *channel = &meson->channels[i];
struct clk_parent_data div_parent = {}, gate_parent = {};
struct clk_init_data init = {};
+ struct clk_divider *div;
+ struct clk_gate *gate;
+ struct clk_mux *mux;
+
+ mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
+ if (!mux)
+ return -ENOMEM;
snprintf(name, sizeof(name), "%s#mux%u", dev_name(dev), i);
@@ -451,63 +455,70 @@ static int meson_pwm_init_channels(struct device *dev)
init.parent_data = mux_parent_data;
init.num_parents = MESON_NUM_MUX_PARENTS;
- channel->mux.reg = meson->base + REG_MISC_AB;
- channel->mux.shift =
- meson_pwm_per_channel_data[i].clk_sel_shift;
- channel->mux.mask = MISC_CLK_SEL_MASK;
- channel->mux.flags = 0;
- channel->mux.lock = &meson->lock;
- channel->mux.table = NULL;
- channel->mux.hw.init = &init;
+ mux->reg = meson->base + REG_MISC_AB;
+ mux->shift = meson_pwm_per_channel_data[i].clk_sel_shift;
+ mux->mask = MISC_CLK_SEL_MASK;
+ mux->flags = 0;
+ mux->lock = &meson->lock;
+ mux->table = NULL;
+ mux->hw.init = &init;
- err = devm_clk_hw_register(dev, &channel->mux.hw);
+ err = devm_clk_hw_register(dev, &mux->hw);
if (err)
return dev_err_probe(dev, err,
"failed to register %s\n", name);
+ div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL);
+ if (!div)
+ return -ENOMEM;
+
snprintf(name, sizeof(name), "%s#div%u", dev_name(dev), i);
init.name = name;
init.ops = &clk_divider_ops;
init.flags = CLK_SET_RATE_PARENT;
div_parent.index = -1;
- div_parent.hw = &channel->mux.hw;
+ div_parent.hw = &mux->hw;
init.parent_data = &div_parent;
init.num_parents = 1;
- channel->div.reg = meson->base + REG_MISC_AB;
- channel->div.shift = meson_pwm_per_channel_data[i].clk_div_shift;
- channel->div.width = MISC_CLK_DIV_WIDTH;
- channel->div.hw.init = &init;
- channel->div.flags = 0;
- channel->div.lock = &meson->lock;
+ div->reg = meson->base + REG_MISC_AB;
+ div->shift = meson_pwm_per_channel_data[i].clk_div_shift;
+ div->width = MISC_CLK_DIV_WIDTH;
+ div->hw.init = &init;
+ div->flags = 0;
+ div->lock = &meson->lock;
- err = devm_clk_hw_register(dev, &channel->div.hw);
+ err = devm_clk_hw_register(dev, &div->hw);
if (err)
return dev_err_probe(dev, err,
"failed to register %s\n", name);
+ gate = devm_kzalloc(dev, sizeof(*gate), GFP_KERNEL);
+ if (!gate)
+ return -ENOMEM;
+
snprintf(name, sizeof(name), "%s#gate%u", dev_name(dev), i);
init.name = name;
init.ops = &clk_gate_ops;
init.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED;
gate_parent.index = -1;
- gate_parent.hw = &channel->div.hw;
+ gate_parent.hw = &div->hw;
init.parent_data = &gate_parent;
init.num_parents = 1;
- channel->gate.reg = meson->base + REG_MISC_AB;
- channel->gate.bit_idx = meson_pwm_per_channel_data[i].clk_en_shift;
- channel->gate.hw.init = &init;
- channel->gate.flags = 0;
- channel->gate.lock = &meson->lock;
+ gate->reg = meson->base + REG_MISC_AB;
+ gate->bit_idx = meson_pwm_per_channel_data[i].clk_en_shift;
+ gate->hw.init = &init;
+ gate->flags = 0;
+ gate->lock = &meson->lock;
- err = devm_clk_hw_register(dev, &channel->gate.hw);
+ err = devm_clk_hw_register(dev, &gate->hw);
if (err)
return dev_err_probe(dev, err, "failed to register %s\n", name);
- channel->clk = devm_clk_hw_get_clk(dev, &channel->gate.hw, NULL);
+ channel->clk = devm_clk_hw_get_clk(dev, &gate->hw, NULL);
if (IS_ERR(channel->clk))
return dev_err_probe(dev, PTR_ERR(channel->clk),
"failed to register %s\n", name);
--
2.42.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2023-12-22 11:18 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-22 11:16 [PATCH v4 0/6] pwm: meson: dt-bindings fixup Jerome Brunet
2023-12-22 11:16 ` [PATCH v4 1/6] dt-bindings: pwm: amlogic: fix s4 bindings Jerome Brunet
2024-01-17 10:03 ` Uwe Kleine-König
2024-01-17 10:30 ` Jerome Brunet
2024-01-23 8:28 ` Junyi Zhao
2023-12-22 11:16 ` [PATCH v4 2/6] dt-bindings: pwm: amlogic: add new compatible for meson8 pwm type Jerome Brunet
2023-12-23 14:02 ` Krzysztof Kozlowski
2024-01-17 9:58 ` Uwe Kleine-König
2024-01-17 10:16 ` Jerome Brunet
2024-01-17 10:51 ` Uwe Kleine-König
2024-01-17 17:29 ` Krzysztof Kozlowski
2023-12-22 11:16 ` [PATCH v4 3/6] pwm: meson: generalize 4 inputs clock on " Jerome Brunet
2024-01-24 9:08 ` Uwe Kleine-König
2024-01-24 9:11 ` Jerome Brunet
2024-01-24 9:42 ` Uwe Kleine-König
2023-12-22 11:16 ` [PATCH v4 4/6] pwm: meson: use device data to carry information around Jerome Brunet
2024-02-05 17:12 ` Uwe Kleine-König
2024-02-20 17:10 ` Jerome Brunet
2023-12-22 11:16 ` Jerome Brunet [this message]
2024-01-24 9:02 ` [PATCH v4 5/6] pwm: meson: don't carry internal clock elements around Uwe Kleine-König
2024-01-24 9:16 ` Jerome Brunet
2024-01-24 9:48 ` Uwe Kleine-König
2024-01-24 9:59 ` Jerome Brunet
2024-01-25 6:53 ` Junyi Zhao
2023-12-22 11:16 ` [PATCH v4 6/6] pwm: meson: add generic compatible for meson8 to sm1 Jerome Brunet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231222111658.832167-6-jbrunet@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=junyi.zhao@amlogic.com \
--cc=khilman@baylibre.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox