Linux-Amlogic Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Ronald Claveau" <linux-kernel-dev@aliel.fr>
Cc: mfd@lists.linux.dev, robh@kernel.org, devicetree@vger.kernel.org,
	neil.armstrong@linaro.org, conor+dt@kernel.org,
	linux-amlogic@lists.infradead.org, lee@kernel.org
Subject: Re: [PATCH v9 5/6] arm64: dts: amlogic: t7: Add i2c controller node
Date: Wed, 05 Aug 2026 08:19:10 +0000	[thread overview]
Message-ID: <20260805081910.DBA191F000E9@smtp.kernel.org> (raw)
In-Reply-To: <20260805-add-mcu-fan-khadas-vim4-v9-5-75df78710b9e@aliel.fr>

Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
- [High] Probe fails for generic Khadas MCU devices because match data evaluates to NULL.
- [Medium] The fan regulator is leaked on probe error and driver unbind.
--

--- Patch [5]: [PATCH v9 5/6] arm64: dts: amlogic: t7: Add i2c controller node ---
commit b6b3cf68d983172e0dc3e121aff82af7de674ddb
Author: Ronald Claveau <linux-kernel-dev@aliel.fr>

arm64: dts: amlogic: t7: Add i2c controller node

Add the T7 i2c controller node used by the Khadas VIM4 for MCU communication.
Use amlogic,meson-axg-i2c as fallback compatible.

> diff --git a/drivers/mfd/khadas-mcu.c b/drivers/mfd/khadas-mcu.c
> index ba981a7886921..4cb305ac915e1 100644
> --- a/drivers/mfd/khadas-mcu.c
> +++ b/drivers/mfd/khadas-mcu.c
[ ... ]
> @@ -75,47 +75,138 @@ static const struct regmap_config khadas_mcu_regmap_config = {
[ ... ]
>  static int khadas_mcu_probe(struct i2c_client *client)
>  {
> +	const struct mfd_cell *cells, *fan_cells;
> +	const struct regmap_config *regmap_cfg;
>  	struct device *dev = &client->dev;
> +	int ncells, nfan_cells, ret;
>  	struct khadas_mcu *ddata;
> -	int ret;
> +	const void *match;
>  
>  	ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
>  	if (!ddata)
>  		return -ENOMEM;
>  
> +	match = i2c_get_match_data(client);
> +	if (!match)
> +		return -ENODEV;
> +
> +	switch ((uintptr_t)match) {
> +	case KHADAS_MCU_GENERIC:

[Severity: High]
Does this check unintentionally abort probe for generic Khadas MCU devices?

Because KHADAS_MCU_GENERIC is 0, the data field in the match table is
effectively a null pointer:

    { .compatible = "khadas,mcu", .data = (void *)KHADAS_MCU_GENERIC }

When khadas_mcu_probe() is called for a generic device, i2c_get_match_data()
returns NULL. The check for (!match) is met, and the driver unconditionally
returns -ENODEV. This causes a regression for all generic Khadas MCU boards.

[ ... ]
> diff --git a/drivers/thermal/khadas_mcu_fan.c b/drivers/thermal/khadas_mcu_fan.c
> index 21b3d0a71bd0d..c7f74394b823f 100644
> --- a/drivers/thermal/khadas_mcu_fan.c
> +++ b/drivers/thermal/khadas_mcu_fan.c
[ ... ]
> @@ -78,6 +81,7 @@ static const struct thermal_cooling_device_ops khadas_mcu_fan_cooling_ops = {
[ ... ]
>  static int khadas_mcu_fan_probe(struct platform_device *pdev)
>  {
> +	const struct khadas_mcu_fan_pdata *pdata = dev_get_platdata(&pdev->dev);
>  	struct khadas_mcu *mcu = dev_get_drvdata(pdev->dev.parent);
>  	struct thermal_cooling_device *cdev;
>  	struct device *dev = &pdev->dev;
> @@ -87,7 +91,22 @@ static int khadas_mcu_fan_probe(struct platform_device *pdev)
>  	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
>  	if (!ctx)
>  		return -ENOMEM;
> +
>  	ctx->mcu = mcu;
> +	ctx->fan_reg = pdata->fan_reg;
> +	ctx->levels = pdata->levels;
> +	ctx->nlevels = pdata->nlevels;
> +
> +	ctx->power = devm_regulator_get(dev->parent, "fan");
> +	if (IS_ERR(ctx->power))
> +		return PTR_ERR(ctx->power);
> +
> +	ret = regulator_enable(ctx->power);
> +	if (ret) {
> +		dev_err(dev, "Failed to enable fan power supply: %d\n", ret);
> +		return ret;
> +	}
> +
>  	platform_set_drvdata(pdev, ctx);
>  
>  	cdev = devm_thermal_of_child_cooling_device_register(dev->parent,

[Severity: Medium]
Could this leak the regulator on probe error or driver unbind?

If devm_thermal_of_child_cooling_device_register() fails later in
khadas_mcu_fan_probe(), the function returns without calling
regulator_disable().

Additionally, there is no remove callback in khadas_mcu_fan_driver:

static struct platform_driver khadas_mcu_fan_driver = {
    .probe      = khadas_mcu_fan_probe,
    .shutdown   = khadas_mcu_fan_shutdown,
    .driver = { ...

This means the regulator is not cleanly disabled when the driver is unbound,
which could leave the reference leaked and prevent the regulator from ever
being powered down.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260805-add-mcu-fan-khadas-vim4-v9-0-75df78710b9e@aliel.fr?part=5

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  reply	other threads:[~2026-08-05  8:19 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-05  8:06 [PATCH v9 0/6] Add VIM4 MCU/FAN support Ronald Claveau via B4 Relay
2026-08-05  8:06 ` [PATCH v9 1/6] mfd: khadas-mcu: Add per-variant configuration infrastructure and VIM4 support Ronald Claveau via B4 Relay
2026-08-05  8:16   ` sashiko-bot
2026-08-05  8:06 ` [PATCH v9 2/6] mfd: khadas-mcu: Use MFD_CELL_* macros for cell declarations Ronald Claveau via B4 Relay
2026-08-05  8:16   ` sashiko-bot
2026-08-05  8:06 ` [PATCH v9 3/6] mfd: khadas-mcu: Add support for VIM4 MCU variant Ronald Claveau via B4 Relay
2026-08-05  8:19   ` sashiko-bot
2026-08-05  8:06 ` [PATCH v9 4/6] thermal: khadas-mcu-fan: Add fan config from platform data Add regulator support Ronald Claveau via B4 Relay
2026-08-05  8:21   ` sashiko-bot
2026-08-05  8:06 ` [PATCH v9 5/6] arm64: dts: amlogic: t7: Add i2c controller node Ronald Claveau via B4 Relay
2026-08-05  8:19   ` sashiko-bot [this message]
2026-08-05  8:06 ` [PATCH v9 6/6] arm64: dts: amlogic: t7: khadas-vim4: Add i2c MCU fan node Ronald Claveau via B4 Relay
2026-08-05  8:24   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260805081910.DBA191F000E9@smtp.kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=lee@kernel.org \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-kernel-dev@aliel.fr \
    --cc=mfd@lists.linux.dev \
    --cc=neil.armstrong@linaro.org \
    --cc=robh@kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox