Linux-Amlogic Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Nick Xie <nick@khadas.com>
To: neil.armstrong@linaro.org, khilman@baylibre.com
Cc: robh@kernel.org, conor+dt@kernel.org, devicetree@vger.kernel.org,
	martin.blumenstingl@googlemail.com, linux-kernel@vger.kernel.org,
	xianwei.zhao@amlogic.com, linux-amlogic@lists.infradead.org,
	krzk+dt@kernel.org, xieqinick@gmail.com,
	linux-arm-kernel@lists.infradead.org, jbrunet@baylibre.com
Subject: [PATCH 2/2] arm64: dts: amlogic-a9-a311y3-khadas-vim-5: add initial device tree
Date: Sat, 17 Oct 2026 12:00:38 +0800	[thread overview]
Message-ID: <20261017040038.3702428-3-nick@khadas.com> (raw)
In-Reply-To: <20261017040038.3702428-1-nick@khadas.com>

The Khadas VIM 5 uses the Amlogic A311Y3 SoC, based on the Amlogic A9
SoC family, on a board with the same form factor as the
VIM/VIM2/VIM3/VIM4/VIM1S models. The serial debug console works with this
initial device tree.

It features:
 - 8GB LPDDR5
 - 64GB eMMC 5.1 storage
 - 32MB SPI flash
 - 10/100/1000 Base-T Ethernet
 - AP6275P Wireless (802.11 a/b/g/n/ac/ax, BT5.1)
 - HDMI 2.1 output
 - HDMI 2.1 input
 - 1x USB 2.0 + 1x USB 3.0 ports
 - 1x USB-C with USB 3.0/DP/PD
 - 2x LEDs (1x red, 1x white)
 - 3x buttons (power, function, reset)
 - M2 socket with PCIe, USB, ADC & I2C
 - 1x 4 lanes MIPI DSI
 - 1x 4 lanes MIPI CSI
 - 40pin GPIO Header
 - 1x micro SD card slot

Signed-off-by: Nick Xie <nick@khadas.com>
---
 arch/arm64/boot/dts/amlogic/Makefile          |  1 +
 .../amlogic-a9-a311y3-khadas-vim-5.dts        | 42 +++++++++++++++++++
 2 files changed, 43 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-a9-a311y3-khadas-vim-5.dts

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 57bc440fa55cc..8b4e3212be131 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -2,6 +2,7 @@
 dtb-$(CONFIG_ARCH_MESON) += amlogic-a4-a113l2-ba400.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-a5-a113x2-av400.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-a9-a311y3-by401.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-a9-a311y3-khadas-vim-5.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c308l-aw419.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-s6-s905x5-bl209.dtb
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a9-a311y3-khadas-vim-5.dts b/arch/arm64/boot/dts/amlogic/amlogic-a9-a311y3-khadas-vim-5.dts
new file mode 100644
index 0000000000000..3989ce7a8aff9
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a9-a311y3-khadas-vim-5.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2026 Khadas Technology Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "amlogic-a9.dtsi"
+
+/ {
+	model = "Khadas VIM 5";
+	compatible = "khadas,vim-5", "amlogic,a9";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_b;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0xe0000000>,
+		      <0x1 0x0 0x1 0x20000000>; /* 8 GiB */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 35 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x05000000 0x0 0x2300000>;
+			no-map;
+		};
+	};
+};
+
+&uart_b {
+	status = "okay";
+};
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

      parent reply	other threads:[~2026-10-17  4:01 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-17  4:00 [PATCH 0/2] Add initial support for Khadas VIM 5 Nick Xie
2026-10-17  4:00 ` [PATCH 1/2] dt-bindings: arm: amlogic: Add " Nick Xie
2026-10-17  9:05   ` Krzysztof Kozlowski
2026-10-17  4:00 ` Nick Xie [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261017040038.3702428-3-nick@khadas.com \
    --to=nick@khadas.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jbrunet@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=neil.armstrong@linaro.org \
    --cc=robh@kernel.org \
    --cc=xianwei.zhao@amlogic.com \
    --cc=xieqinick@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox