From: Jiebing Chen <jiebing.chen@amlogic.com>
To: Jerome Brunet <jbrunet@baylibre.com>,
jiebing chen via B4 Relay
<devnull+jiebing.chen.amlogic.com@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
Kevin Hilman <khilman@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
linux-sound@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-clk@vger.kernel.org,
jian.xu@amlogic.com, shuai.li@amlogic.com, zhe.wang@amlogic.com
Subject: Re: [PATCH v3 5/6] ASoC: meson: s4: Add s4 tocodec driver
Date: Fri, 7 Mar 2025 10:48:10 +0800 [thread overview]
Message-ID: <26292ce9-7644-4a8f-8817-045cf6dd87b0@amlogic.com> (raw)
In-Reply-To: <1jfrjq5ews.fsf@starbuckisacylon.baylibre.com>
在 2025/3/6 23:58, Jerome Brunet 写道:
> [ EXTERNAL EMAIL ]
>
> On Fri 28 Feb 2025 at 16:04, jiebing chen via B4 Relay <devnull+jiebing.chen.amlogic.com@kernel.org> wrote:
>
>> From: jiebing chen <jiebing.chen@amlogic.com>
>>
>> S4 tocodec support 8 lane to input, It need to enable
>> bclk and mclk control bit when work
>>
>> Signed-off-by: jiebing chen <jiebing.chen@amlogic.com>
>> ---
>> sound/soc/meson/g12a-toacodec.c | 51 +++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 51 insertions(+)
>>
>> diff --git a/sound/soc/meson/g12a-toacodec.c b/sound/soc/meson/g12a-toacodec.c
>> index 531bb8707a3ec4c47814d6a0676d5c62c705da75..41eef9980059285275f0189a06469fc694775955 100644
>> --- a/sound/soc/meson/g12a-toacodec.c
>> +++ b/sound/soc/meson/g12a-toacodec.c
>> @@ -41,6 +41,9 @@
>> #define CTRL0_BCLK_SEL_LSB 4
>> #define CTRL0_MCLK_SEL GENMASK(2, 0)
>>
>> +#define CTRL0_BCLK_ENABLE_SHIFT 30
>> +#define CTRL0_MCLK_ENABLE_SHIFT 29
>> +
>> #define TOACODEC_OUT_CHMAX 2
>>
>> struct g12a_toacodec {
>> @@ -129,6 +132,10 @@ static const struct snd_kcontrol_new g12a_toacodec_out_enable =
>> SOC_DAPM_SINGLE_AUTODISABLE("Switch", TOACODEC_CTRL0,
>> CTRL0_ENABLE_SHIFT, 1, 0);
>>
>> +static const struct snd_kcontrol_new s4_toacodec_clk_enable =
>> + SOC_DAPM_DOUBLE("Switch", TOACODEC_CTRL0,
>> + CTRL0_BCLK_ENABLE_SHIFT, CTRL0_MCLK_ENABLE_SHIFT, 1, 0);
>> +
>> static const struct snd_soc_dapm_widget g12a_toacodec_widgets[] = {
>> SND_SOC_DAPM_MUX("SRC", SND_SOC_NOPM, 0, 0,
>> &g12a_toacodec_mux),
>> @@ -143,6 +150,15 @@ static const struct snd_soc_dapm_widget sm1_toacodec_widgets[] = {
>> &g12a_toacodec_out_enable),
>> };
>>
>> +static const struct snd_soc_dapm_widget s4_toacodec_widgets[] = {
>> + SND_SOC_DAPM_MUX("SRC", SND_SOC_NOPM, 0, 0,
>> + &sm1_toacodec_mux),
>> + SND_SOC_DAPM_SWITCH("OUT EN", SND_SOC_NOPM, 0, 0,
>> + &g12a_toacodec_out_enable),
>> + SND_SOC_DAPM_SWITCH("CLK EN", SND_SOC_NOPM, 0, 0,
>> + &s4_toacodec_clk_enable),
> I don't see a reason for the user to control that.
>
> A user controls if the component is enable or not, and possibly select
> the lane ... but that's it
>
> You could have to flipped automatically which dapm when the component is
> powered, that would make a lot more sense.
Hi,Jerome
Thank you for your suggestion. Can we design it as a supply widget for
tocodec bclk and mclk control?
when dapm poweron, and supply widget power on, Users do not have to
operate additional Kcontrols
>
>> +};
>> +
>> static int g12a_toacodec_input_hw_params(struct snd_pcm_substream *substream,
>> struct snd_pcm_hw_params *params,
>> struct snd_soc_dai *dai)
>> @@ -228,6 +244,15 @@ static const struct snd_soc_dapm_route g12a_toacodec_routes[] = {
>> { "OUT Capture", NULL, "OUT EN" },
>> };
>>
>> +static const struct snd_soc_dapm_route s4_toacodec_routes[] = {
>> + { "SRC", "I2S A", "IN A Playback" },
>> + { "SRC", "I2S B", "IN B Playback" },
>> + { "SRC", "I2S C", "IN C Playback" },
>> + { "OUT EN", "Switch", "SRC" },
>> + { "CLK EN", "Switch", "OUT EN" },
>> + { "OUT Capture", NULL, "CLK EN" },
>> +};
>> +
>> static const struct snd_kcontrol_new g12a_toacodec_controls[] = {
>> SOC_SINGLE("Lane Select", TOACODEC_CTRL0, CTRL0_LANE_SEL, 3, 0),
>> };
>> @@ -236,6 +261,10 @@ static const struct snd_kcontrol_new sm1_toacodec_controls[] = {
>> SOC_SINGLE("Lane Select", TOACODEC_CTRL0, CTRL0_LANE_SEL_SM1, 3, 0),
>> };
>>
>> +static const struct snd_kcontrol_new s4_toacodec_controls[] = {
>> + SOC_SINGLE("Lane Select", TOACODEC_CTRL0, CTRL0_LANE_SEL_SM1, 7, 0),
>> +};
>> +
>> static const struct snd_soc_component_driver g12a_toacodec_component_drv = {
>> .probe = g12a_toacodec_component_probe,
>> .controls = g12a_toacodec_controls,
>> @@ -258,6 +287,17 @@ static const struct snd_soc_component_driver sm1_toacodec_component_drv = {
>> .endianness = 1,
>> };
>>
>> +static const struct snd_soc_component_driver s4_toacodec_component_drv = {
>> + .probe = sm1_toacodec_component_probe,
>> + .controls = s4_toacodec_controls,
>> + .num_controls = ARRAY_SIZE(s4_toacodec_controls),
>> + .dapm_widgets = s4_toacodec_widgets,
>> + .num_dapm_widgets = ARRAY_SIZE(s4_toacodec_widgets),
>> + .dapm_routes = s4_toacodec_routes,
>> + .num_dapm_routes = ARRAY_SIZE(s4_toacodec_routes),
>> + .endianness = 1,
>> +};
>> +
>> static const struct regmap_config g12a_toacodec_regmap_cfg = {
>> .reg_bits = 32,
>> .val_bits = 32,
>> @@ -278,6 +318,13 @@ static const struct g12a_toacodec_match_data sm1_toacodec_match_data = {
>> .field_bclk_sel = REG_FIELD(TOACODEC_CTRL0, 4, 6),
>> };
>>
>> +static const struct g12a_toacodec_match_data s4_toacodec_match_data = {
>> + .component_drv = &s4_toacodec_component_drv,
>> + .field_dat_sel = REG_FIELD(TOACODEC_CTRL0, 19, 20),
>> + .field_lrclk_sel = REG_FIELD(TOACODEC_CTRL0, 12, 14),
>> + .field_bclk_sel = REG_FIELD(TOACODEC_CTRL0, 4, 6),
>> +};
>> +
>> static const struct of_device_id g12a_toacodec_of_match[] = {
>> {
>> .compatible = "amlogic,g12a-toacodec",
>> @@ -287,6 +334,10 @@ static const struct of_device_id g12a_toacodec_of_match[] = {
>> .compatible = "amlogic,sm1-toacodec",
>> .data = &sm1_toacodec_match_data,
>> },
>> + {
>> + .compatible = "amlogic,s4-toacodec",
>> + .data = &s4_toacodec_match_data,
>> + },
>> {}
>> };
>> MODULE_DEVICE_TABLE(of, g12a_toacodec_of_match);
> --
> Jerome
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2025-03-07 2:50 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-28 8:04 [PATCH v3 0/6] Add support for S4 audio jiebing chen via B4 Relay
2025-02-28 8:04 ` [PATCH v3 1/6] dt-bindings: clock: meson: Add audio power domain for s4 soc jiebing chen via B4 Relay
2025-02-28 21:51 ` Rob Herring
2025-02-28 8:04 ` [PATCH v3 2/6] dt-bindings: clock: axg-audio: Add mclk and sclk pad clock ids jiebing chen via B4 Relay
2025-02-28 21:53 ` Rob Herring (Arm)
2025-02-28 8:04 ` [PATCH v3 3/6] dt-bindings: Asoc: axg-audio: Add s4 audio tocodec jiebing chen via B4 Relay
2025-02-28 21:54 ` Rob Herring (Arm)
2025-02-28 8:04 ` [PATCH v3 4/6] clk: meson: axg-audio: Add the mclk pad div for s4 jiebing chen via B4 Relay
2025-03-06 16:41 ` Jerome Brunet
2025-03-07 2:58 ` Jiebing Chen
2025-02-28 8:04 ` [PATCH v3 5/6] ASoC: meson: s4: Add s4 tocodec driver jiebing chen via B4 Relay
2025-03-06 15:58 ` Jerome Brunet
2025-03-07 2:48 ` Jiebing Chen [this message]
2025-02-28 8:04 ` [PATCH v3 6/6] arm64: dts: amlogic: Add Amlogic S4 Audio jiebing chen via B4 Relay
2025-02-28 14:23 ` [PATCH v3 0/6] Add support for S4 audio Rob Herring (Arm)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=26292ce9-7644-4a8f-8817-045cf6dd87b0@amlogic.com \
--to=jiebing.chen@amlogic.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=devnull+jiebing.chen.amlogic.com@kernel.org \
--cc=jbrunet@baylibre.com \
--cc=jian.xu@amlogic.com \
--cc=khilman@baylibre.com \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=mturquette@baylibre.com \
--cc=neil.armstrong@linaro.org \
--cc=perex@perex.cz \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=shuai.li@amlogic.com \
--cc=tiwai@suse.com \
--cc=zhe.wang@amlogic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox