From: hkallweit1@gmail.com (Heiner Kallweit)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 05/12] i2c: meson: set clock divider in probe instead of setting it for each transfer
Date: Wed, 8 Mar 2017 07:45:30 +0100 [thread overview]
Message-ID: <297d4566-483e-eb46-a87c-7097e2953fa4@gmail.com> (raw)
In-Reply-To: <d5f0545a-fb4c-b436-20f5-7df9d10605b1@gmail.com>
The bus frequency won't change, therefore we can set the clock divider
in probe already and we don't have to set it for each transfer.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
drivers/i2c/busses/i2c-meson.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/i2c/busses/i2c-meson.c b/drivers/i2c/busses/i2c-meson.c
index a5764be5..594fec22 100644
--- a/drivers/i2c/busses/i2c-meson.c
+++ b/drivers/i2c/busses/i2c-meson.c
@@ -74,7 +74,6 @@ enum {
* @error: Flag set when an error is received
* @lock: To avoid race conditions between irq handler and xfer code
* @done: Completion used to wait for transfer termination
- * @timings: Struct including the bus frequency
* @tokens: Sequence of tokens to be written to the device
* @num_tokens: Number of tokens
*/
@@ -93,7 +92,6 @@ struct meson_i2c {
spinlock_t lock;
struct completion done;
- struct i2c_timings timings;
u32 tokens[2];
int num_tokens;
};
@@ -132,12 +130,12 @@ static void meson_i2c_write_tokens(struct meson_i2c *i2c)
writel(i2c->tokens[1], i2c->regs + REG_TOK_LIST1);
}
-static void meson_i2c_set_clk_div(struct meson_i2c *i2c)
+static void meson_i2c_set_clk_div(struct meson_i2c *i2c, unsigned int freq)
{
unsigned long clk_rate = clk_get_rate(i2c->clk);
unsigned int div;
- div = DIV_ROUND_UP(clk_rate, i2c->timings.bus_freq_hz * 4);
+ div = DIV_ROUND_UP(clk_rate, freq * 4);
/* clock divider has 12 bits */
WARN_ON(div >= (1 << 12));
@@ -149,7 +147,7 @@ static void meson_i2c_set_clk_div(struct meson_i2c *i2c)
(div >> 10) << REG_CTRL_CLKDIVEXT_SHIFT);
dev_dbg(i2c->dev, "%s: clk %lu, freq %u, div %u\n", __func__,
- clk_rate, i2c->timings.bus_freq_hz, div);
+ clk_rate, freq, div);
}
static void meson_i2c_get_data(struct meson_i2c *i2c, char *buf, int len)
@@ -369,7 +367,6 @@ static int meson_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
int i, ret = 0, count = 0;
clk_enable(i2c->clk);
- meson_i2c_set_clk_div(i2c);
for (i = 0; i < num; i++) {
ret = meson_i2c_xfer_msg(i2c, msgs + i, i == num - 1);
@@ -396,6 +393,7 @@ static const struct i2c_algorithm meson_i2c_algorithm = {
static int meson_i2c_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
+ struct i2c_timings timings;
struct meson_i2c *i2c;
struct resource *mem;
int irq, ret = 0;
@@ -404,7 +402,7 @@ static int meson_i2c_probe(struct platform_device *pdev)
if (!i2c)
return -ENOMEM;
- i2c_parse_fw_timings(&pdev->dev, &i2c->timings, true);
+ i2c_parse_fw_timings(&pdev->dev, &timings, true);
i2c->dev = &pdev->dev;
platform_set_drvdata(pdev, i2c);
@@ -462,6 +460,8 @@ static int meson_i2c_probe(struct platform_device *pdev)
return ret;
}
+ meson_i2c_set_clk_div(i2c, timings.bus_freq_hz);
+
return 0;
}
--
2.12.0
next prev parent reply other threads:[~2017-03-08 6:45 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-08 6:41 [PATCH 00/12] i2c: meson: series with improvements Heiner Kallweit
2017-03-08 6:42 ` [PATCH 01/12] i2c: meson: use min instead of min_t where min_t isn't needed Heiner Kallweit
2017-03-08 9:25 ` Jerome Brunet
2017-03-08 6:43 ` [PATCH 02/12] i2c: meson: remove member irq from struct meson_i2c Heiner Kallweit
2017-03-08 9:07 ` Jerome Brunet
2017-03-08 6:44 ` [PATCH 03/12] i2c: meson: use i2c core for DT clock-frequency parsing Heiner Kallweit
2017-03-08 9:10 ` Jerome Brunet
2017-03-08 6:44 ` [PATCH 04/12] i2c: meson: use full 12 bits for clock divider Heiner Kallweit
2017-03-08 9:19 ` Jerome Brunet
2017-03-08 6:45 ` Heiner Kallweit [this message]
2017-03-08 6:46 ` [PATCH 06/12] i2c: meson: remove variable count from meson_i2c_xfer Heiner Kallweit
2017-03-08 9:28 ` Jerome Brunet
2017-03-08 6:47 ` [PATCH 07/12] i2c: meson: improve interrupt handler and detect spurious interrupts Heiner Kallweit
2017-03-08 9:50 ` Jerome Brunet
2017-03-08 21:02 ` Heiner Kallweit
2017-03-09 20:16 ` Heiner Kallweit
2017-03-08 6:47 ` [PATCH 08/12] i2c: meson: explicitly ignore messages with length zero Heiner Kallweit
[not found] ` <CANe6Qb9nKdLnOcwEwuk8NXEB+fxW2S_kkzP+U+qygYhNqz0Y0w@mail.gmail.com>
2017-03-08 22:03 ` Heiner Kallweit
2017-03-08 6:48 ` [PATCH 09/12] i2c: meson: don't create separate token chain just for the stop command Heiner Kallweit
2017-03-08 6:49 ` [PATCH 10/12] i2c: meson: remove meson_i2c_write_tokens Heiner Kallweit
2017-03-08 6:49 ` [PATCH 11/12] i2c: meson: improve and simplify interrupt handler Heiner Kallweit
2017-03-08 6:50 ` [PATCH 12/12] i2c: meson: use state in meson_i2c_prepare_xfer Heiner Kallweit
2017-03-08 9:34 ` [PATCH 00/12] i2c: meson: series with improvements Jerome Brunet
2017-03-08 20:49 ` Heiner Kallweit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=297d4566-483e-eb46-a87c-7097e2953fa4@gmail.com \
--to=hkallweit1@gmail.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).