From: hkallweit1@gmail.com (Heiner Kallweit)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 08/12] firmware: arm_scpi: remove all single element structures
Date: Tue, 5 Dec 2017 23:17:09 +0100 [thread overview]
Message-ID: <2ec9d59c-9dd5-2e5d-26f2-c4e4407e5af7@gmail.com> (raw)
In-Reply-To: <99220c79-8b35-2978-11d1-6d101ccb6772@gmail.com>
From: Sudeep Holla <sudeep.holla@arm.com>
Both clk_get_value and sensor_value structures contains a single element
and hence needs no packing making the whole structure defination
unnecessary.
This patch gets rid of both those unnecessary structures.
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
drivers/firmware/arm_scpi.c | 22 +++++++---------------
1 file changed, 7 insertions(+), 15 deletions(-)
diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c
index e02d5820..3a722e5a 100644
--- a/drivers/firmware/arm_scpi.c
+++ b/drivers/firmware/arm_scpi.c
@@ -304,10 +304,6 @@ struct clk_get_info {
u8 name[20];
} __packed;
-struct clk_get_value {
- __le32 rate;
-} __packed;
-
struct clk_set_value {
__le16 id;
__le16 reserved;
@@ -346,10 +342,6 @@ struct _scpi_sensor_info {
char name[20];
};
-struct sensor_value {
- __le64 val;
-};
-
struct dev_pstate_set {
__le16 dev_id;
u8 pstate;
@@ -577,13 +569,13 @@ scpi_clk_get_range(u16 clk_id, unsigned long *min, unsigned long *max)
static unsigned long scpi_clk_get_val(u16 clk_id)
{
int ret;
- struct clk_get_value clk;
+ __le32 rate;
__le16 le_clk_id = cpu_to_le16(clk_id);
ret = scpi_send_message(CMD_GET_CLOCK_VALUE, &le_clk_id,
- sizeof(le_clk_id), &clk, sizeof(clk));
+ sizeof(le_clk_id), &rate, sizeof(rate));
- return ret ? ret : le32_to_cpu(clk.rate);
+ return ret ? ret : le32_to_cpu(rate);
}
static int scpi_clk_set_val(u16 clk_id, unsigned long rate)
@@ -767,19 +759,19 @@ static int scpi_sensor_get_info(u16 sensor_id, struct scpi_sensor_info *info)
static int scpi_sensor_get_value(u16 sensor, u64 *val)
{
__le16 id = cpu_to_le16(sensor);
- struct sensor_value buf;
+ __le64 value;
int ret;
ret = scpi_send_message(CMD_SENSOR_VALUE, &id, sizeof(id),
- &buf, sizeof(buf));
+ &value, sizeof(value));
if (ret)
return ret;
if (scpi_info->is_legacy)
/* only 32-bits supported, upper 32 bits can be junk */
- *val = le32_to_cpup((__le32 *)&buf.val);
+ *val = le32_to_cpup((__le32 *)&value);
else
- *val = le64_to_cpu(buf.val);
+ *val = le64_to_cpu(value);
return 0;
}
--
2.15.1
next prev parent reply other threads:[~2017-12-05 22:17 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-05 21:54 [PATCH 00/12] firmware: arm_scpi: series with smaller improvements Heiner Kallweit
2017-12-05 22:16 ` [PATCH 01/12] firmware: arm_scpi: remove two unneeded devm_kfree's in scpi_remove Heiner Kallweit
2017-12-05 22:16 ` [PATCH 02/12] firmware: arm_scpi: make freeing mbox channels device-managed Heiner Kallweit
2017-12-05 22:16 ` [PATCH 03/12] firmware: arm_scpi: make scpi_probe completely device-managed Heiner Kallweit
2017-12-05 22:16 ` [PATCH 04/12] firmware: arm_scpi: improve struct dvfs_info to make code better readable Heiner Kallweit
2017-12-05 22:16 ` [PATCH 05/12] firmware: arm_scpi: improve handling of protocol and firmware version subfields Heiner Kallweit
2017-12-05 22:16 ` [PATCH 06/12] firmware: arm_scpi: improve struct sensor_value Heiner Kallweit
2017-12-05 22:17 ` [PATCH 07/12] firmware: arm_scpi: drop unnecessary type cast to scpi_shared_mem Heiner Kallweit
2017-12-05 22:17 ` Heiner Kallweit [this message]
2017-12-05 22:17 ` [PATCH 09/12] firmware: arm_scpi: silence sparse warnings Heiner Kallweit
2017-12-05 22:17 ` [PATCH 10/12] firmware: arm_scpi: remove struct sensor_capabilities Heiner Kallweit
2017-12-05 22:17 ` [PATCH 11/12] firmware: arm_scpi: use FIELD_GET/_PREP to simplify macro definitions Heiner Kallweit
2017-12-05 22:17 ` [PATCH 12/12] firmware: arm_scpi: improve info message for pre-1.0 firmware Heiner Kallweit
2018-01-10 16:56 ` [PATCH 00/12] firmware: arm_scpi: series with smaller improvements Sudeep Holla
2018-01-19 18:04 ` Kevin Hilman
2018-02-28 16:32 ` Sudeep Holla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2ec9d59c-9dd5-2e5d-26f2-c4e4407e5af7@gmail.com \
--to=hkallweit1@gmail.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).