From: Jan Dakinevich <jan.dakinevich@salutedevices.com>
To: Jerome Brunet <jbrunet@baylibre.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Kevin Hilman <khilman@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
<linux-amlogic@lists.infradead.org>, <linux-clk@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<alsa-devel@alsa-project.org>, <linux-sound@vger.kernel.org>,
<linux-gpio@vger.kernel.org>, <kernel@salutedevices.com>
Subject: Re: [PATCH 12/25] ASoC: meson: t9015: add support for A1 SoC family
Date: Tue, 19 Mar 2024 03:17:14 +0300 [thread overview]
Message-ID: <340ee66a-da5d-4fd5-95a6-ea22839df988@salutedevices.com> (raw)
In-Reply-To: <1j5xxjhktd.fsf@starbuckisacylon.baylibre.com>
On 3/18/24 13:46, Jerome Brunet wrote:
>
> On Fri 15 Mar 2024 at 02:21, Jan Dakinevich <jan.dakinevich@salutedevices.com> wrote:
>
>> A1's internal codec is very close to t9015. The main difference, that it
>> has ADC. This commit introduces support for capturing from it.
>
> This is mis-leading.
>
> It does not look like the change is A1 specific but rather a extension
> of the support for t9015. It also mixes several different topics like line
> configuration, capture support, etc ...
>
First, it is not only extentsion. Some bits are changed comparing to
existing t9015, so new compatible string is still required.
Second, I don't know anything about about ADC in t9015 on other SoCs and
even don't sure that it exist there (may be I am inattentive, but I'm
unable to find audio input pin on sm1/g12a's pinout).
> Again, the t9015 changes should be a separated series from the rest, and
> there should be one patch per topic.
>
> As Mark, if something is meant to be configured based on the HW layout,
> then there a good change a kcontrol is not appropriate, and this should
> rather be part of the platform description, like DT.
>
> It was also suggested here:
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/sound/soc/meson/t9015.c?h=v6.8#n298
>
Ok. By the way, on a1 LINEOUT_CFG would have another value.
>>
>> Signed-off-by: Jan Dakinevich <jan.dakinevich@salutedevices.com>
>> ---
>> sound/soc/meson/t9015.c | 259 ++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 259 insertions(+)
>>
>> diff --git a/sound/soc/meson/t9015.c b/sound/soc/meson/t9015.c
>> index 48f6767bd858..365955bfeb78 100644
>> --- a/sound/soc/meson/t9015.c
>> +++ b/sound/soc/meson/t9015.c
>> @@ -19,16 +19,33 @@
>> #define LOLP_EN 3
>> #define DACR_EN 4
>> #define DACL_EN 5
>> +#define ADCR_EN 6
>> +#define ADCL_EN 7
>> +#define PGAR_ZCD_EN 8
>> +#define PGAL_ZCD_EN 9
>> +#define PGAR_EN 10
>> +#define PGAL_EN 11
>> +#define ADCR_INV 16
>> +#define ADCL_INV 17
>> +#define ADCR_SRC 18
>> +#define ADCL_SRC 19
>> #define DACR_INV 20
>> #define DACL_INV 21
>> #define DACR_SRC 22
>> #define DACL_SRC 23
>> +#define ADC_DEM_EN 26
>> +#define ADC_FILTER_MODE 28
>> +#define ADC_FILTER_EN 29
>> #define REFP_BUF_EN BIT(12)
>> #define BIAS_CURRENT_EN BIT(13)
>> #define VMID_GEN_FAST BIT(14)
>> #define VMID_GEN_EN BIT(15)
>> #define I2S_MODE BIT(30)
>> #define VOL_CTRL0 0x04
>> +#define PGAR_VC 0
>> +#define PGAL_VC 8
>> +#define ADCR_VC 16
>> +#define ADCL_VC 24
>> #define GAIN_H 31
>> #define GAIN_L 23
>> #define VOL_CTRL1 0x08
>> @@ -46,6 +63,28 @@
>> #define LOLN_POL 8
>> #define LOLP_POL 12
>> #define POWER_CFG 0x10
>> +#define LINEIN_CFG 0x14
>> +#define MICBIAS_LEVEL 0
>> +#define MICBIAS_EN 3
>> +#define PGAR_CTVMN 8
>> +#define PGAR_CTVMP 9
>> +#define PGAL_CTVMN 10
>> +#define PGAL_CTVMP 11
>> +#define PGAR_CTVIN 12
>> +#define PGAR_CTVIP 13
>> +#define PGAL_CTVIN 14
>> +#define PGAL_CTVIP 15
>> +
>> +#define PGAR_MASK (BIT(PGAR_CTVMP) | BIT(PGAR_CTVMN) | \
>> + BIT(PGAR_CTVIP) | BIT(PGAR_CTVIN))
>> +#define PGAR_DIFF (BIT(PGAR_CTVIP) | BIT(PGAR_CTVIN))
>> +#define PGAR_POSITIVE (BIT(PGAR_CTVIP) | BIT(PGAR_CTVMN))
>> +#define PGAR_NEGATIVE (BIT(PGAR_CTVIN) | BIT(PGAR_CTVMP))
>> +#define PGAL_MASK (BIT(PGAL_CTVMP) | BIT(PGAL_CTVMN) | \
>> + BIT(PGAL_CTVIP) | BIT(PGAL_CTVIN))
>> +#define PGAL_DIFF (BIT(PGAL_CTVIP) | BIT(PGAL_CTVIN))
>> +#define PGAL_POSITIVE (BIT(PGAL_CTVIP) | BIT(PGAL_CTVMN))
>> +#define PGAL_NEGATIVE (BIT(PGAL_CTVIN) | BIT(PGAL_CTVMP))
>>
>> struct t9015 {
>> struct regulator *avdd;
>> @@ -103,6 +142,31 @@ static struct snd_soc_dai_driver t9015_dai = {
>> .ops = &t9015_dai_ops,
>> };
>>
>> +static struct snd_soc_dai_driver a1_t9015_dai = {
>> + .name = "t9015-hifi",
>> + .playback = {
>> + .stream_name = "Playback",
>> + .channels_min = 1,
>> + .channels_max = 2,
>> + .rates = SNDRV_PCM_RATE_8000_96000,
>> + .formats = (SNDRV_PCM_FMTBIT_S8 |
>> + SNDRV_PCM_FMTBIT_S16_LE |
>> + SNDRV_PCM_FMTBIT_S20_LE |
>> + SNDRV_PCM_FMTBIT_S24_LE),
>> + },
>> + .capture = {
>> + .stream_name = "Capture",
>> + .channels_min = 1,
>> + .channels_max = 2,
>> + .rates = SNDRV_PCM_RATE_8000_96000,
>> + .formats = (SNDRV_PCM_FMTBIT_S8 |
>> + SNDRV_PCM_FMTBIT_S16_LE |
>> + SNDRV_PCM_FMTBIT_S20_LE |
>> + SNDRV_PCM_FMTBIT_S24_LE),
>> + },
>> + .ops = &t9015_dai_ops,
>> +};
>> +
>> static const DECLARE_TLV_DB_MINMAX_MUTE(dac_vol_tlv, -9525, 0);
>>
>> static const char * const ramp_rate_txt[] = { "Fast", "Slow" };
>> @@ -179,6 +243,166 @@ static const struct snd_soc_dapm_route t9015_dapm_routes[] = {
>> { "LOLP", NULL, "Left+ Driver", },
>> };
>>
>> +static const char * const a1_right_driver_txt[] = { "None", "Right DAC",
>> + "Left DAC Inverted" };
>> +static const unsigned int a1_right_driver_values[] = { 0, 2, 4 };
>> +
>> +static const char * const a1_left_driver_txt[] = { "None", "Left DAC",
>> + "Right DAC Inverted" };
>> +static const unsigned int a1_left_driver_values[] = { 0, 2, 4 };
>> +
>> +static SOC_VALUE_ENUM_SINGLE_DECL(a1_right_driver, LINEOUT_CFG, 12, 0x7,
>> + a1_right_driver_txt, a1_right_driver_values);
>> +static SOC_VALUE_ENUM_SINGLE_DECL(a1_left_driver, LINEOUT_CFG, 4, 0x7,
>> + a1_left_driver_txt, a1_left_driver_values);
>> +
>> +static const struct snd_kcontrol_new a1_right_driver_mux =
>> + SOC_DAPM_ENUM("Right Driver+ Source", a1_right_driver);
>> +static const struct snd_kcontrol_new a1_left_driver_mux =
>> + SOC_DAPM_ENUM("Left Driver+ Source", a1_left_driver);
>> +
>> +static const DECLARE_TLV_DB_MINMAX_MUTE(a1_adc_vol_tlv, -29625, 0);
>> +static const DECLARE_TLV_DB_MINMAX_MUTE(a1_adc_pga_vol_tlv, -1200, 0);
>> +
>> +static const char * const a1_adc_right_txt[] = { "Right", "Left" };
>> +static SOC_ENUM_SINGLE_DECL(a1_adc_right, BLOCK_EN, ADCR_SRC, a1_adc_right_txt);
>> +
>> +static const char * const a1_adc_left_txt[] = { "Left", "Right" };
>> +static SOC_ENUM_SINGLE_DECL(a1_adc_left, BLOCK_EN, ADCL_SRC, a1_adc_left_txt);
>> +
>> +static const struct snd_kcontrol_new a1_adc_right_mux =
>> + SOC_DAPM_ENUM("ADC Right Source", a1_adc_right);
>> +static const struct snd_kcontrol_new a1_adc_left_mux =
>> + SOC_DAPM_ENUM("ADC Left Source", a1_adc_left);
>> +
>> +static const char * const a1_adc_filter_mode_txt[] = { "Voice", "HiFi"};
>> +static SOC_ENUM_SINGLE_DECL(a1_adc_filter_mode, BLOCK_EN, ADC_FILTER_MODE,
>> + a1_adc_filter_mode_txt);
>> +
>> +static const char * const a1_adc_mic_bias_level_txt[] = { "2.0V", "2.1V",
>> + "2.3V", "2.5V", "2.8V" };
>> +static const unsigned int a1_adc_mic_bias_level_values[] = { 0, 1, 2, 3, 7 };
>> +static SOC_VALUE_ENUM_SINGLE_DECL(a1_adc_mic_bias_level,
>> + LINEIN_CFG, MICBIAS_LEVEL, 0x7,
>> + a1_adc_mic_bias_level_txt,
>> + a1_adc_mic_bias_level_values);
>> +
>> +static const char * const a1_adc_pga_txt[] = { "None", "Differential",
>> + "Positive", "Negative" };
>> +static const unsigned int a1_adc_pga_right_values[] = { 0, PGAR_DIFF,
>> + PGAR_POSITIVE, PGAR_NEGATIVE };
>> +static const unsigned int a1_adc_pga_left_values[] = { 0, PGAL_DIFF,
>> + PGAL_POSITIVE, PGAL_NEGATIVE };
>> +
>> +static SOC_VALUE_ENUM_SINGLE_DECL(a1_adc_pga_right, LINEIN_CFG, 0, PGAR_MASK,
>> + a1_adc_pga_txt, a1_adc_pga_right_values);
>> +static SOC_VALUE_ENUM_SINGLE_DECL(a1_adc_pga_left, LINEIN_CFG, 0, PGAL_MASK,
>> + a1_adc_pga_txt, a1_adc_pga_left_values);
>> +
>> +static const struct snd_kcontrol_new a1_adc_pga_right_mux =
>> + SOC_DAPM_ENUM("ADC PGA Right Source", a1_adc_pga_right);
>> +static const struct snd_kcontrol_new a1_adc_pga_left_mux =
>> + SOC_DAPM_ENUM("ADC PGA Left Source", a1_adc_pga_left);
>> +
>> +static const struct snd_kcontrol_new a1_t9015_snd_controls[] = {
>> + /* Volume Controls */
>> + SOC_ENUM("Playback Channel Mode", mono_enum),
>> + SOC_SINGLE("Playback Switch", VOL_CTRL1, DAC_SOFT_MUTE, 1, 1),
>> + SOC_DOUBLE_TLV("Playback Volume", VOL_CTRL1, DACL_VC, DACR_VC,
>> + 0xff, 0, dac_vol_tlv),
>> +
>> + /* Ramp Controls */
>> + SOC_ENUM("Ramp Rate", ramp_rate_enum),
>> + SOC_SINGLE("Volume Ramp Switch", VOL_CTRL1, VC_RAMP_MODE, 1, 0),
>> + SOC_SINGLE("Mute Ramp Switch", VOL_CTRL1, MUTE_MODE, 1, 0),
>> + SOC_SINGLE("Unmute Ramp Switch", VOL_CTRL1, UNMUTE_MODE, 1, 0),
>> +
>> + /* ADC Controls */
>> + SOC_DOUBLE_TLV("ADC Volume", VOL_CTRL0, ADCL_VC, ADCR_VC,
>> + 0x7f, 0, a1_adc_vol_tlv),
>> + SOC_SINGLE("ADC Filter Switch", BLOCK_EN, ADC_FILTER_EN, 1, 0),
>> + SOC_ENUM("ADC Filter Mode", a1_adc_filter_mode),
>> + SOC_SINGLE("ADC Mic Bias Switch", LINEIN_CFG, MICBIAS_EN, 1, 0),
>> + SOC_ENUM("ADC Mic Bias Level", a1_adc_mic_bias_level),
>> + SOC_SINGLE("ADC DEM Switch", BLOCK_EN, ADC_DEM_EN, 1, 0),
>> + SOC_DOUBLE_TLV("ADC PGA Volume", VOL_CTRL0, PGAR_VC, PGAL_VC,
>> + 0x1f, 0, a1_adc_pga_vol_tlv),
>> + SOC_DOUBLE("ADC PGA Zero Cross-detection Switch", BLOCK_EN,
>> + PGAL_ZCD_EN, PGAR_ZCD_EN, 1, 0),
>> +};
>> +
>> +static const struct snd_soc_dapm_widget a1_t9015_dapm_widgets[] = {
>> + SND_SOC_DAPM_AIF_IN("Right IN", NULL, 0, SND_SOC_NOPM, 0, 0),
>> + SND_SOC_DAPM_AIF_IN("Left IN", NULL, 0, SND_SOC_NOPM, 0, 0),
>> + SND_SOC_DAPM_MUX("Right DAC Sel", SND_SOC_NOPM, 0, 0,
>> + &t9015_right_dac_mux),
>> + SND_SOC_DAPM_MUX("Left DAC Sel", SND_SOC_NOPM, 0, 0,
>> + &t9015_left_dac_mux),
>> + SND_SOC_DAPM_DAC("Right DAC", NULL, BLOCK_EN, DACR_EN, 0),
>> + SND_SOC_DAPM_DAC("Left DAC", NULL, BLOCK_EN, DACL_EN, 0),
>> + SND_SOC_DAPM_MUX("Right+ Driver Sel", SND_SOC_NOPM, 0, 0,
>> + &a1_right_driver_mux),
>> + SND_SOC_DAPM_MUX("Left+ Driver Sel", SND_SOC_NOPM, 0, 0,
>> + &a1_left_driver_mux),
>> + SND_SOC_DAPM_OUT_DRV("Right+ Driver", BLOCK_EN, LORP_EN, 0, NULL, 0),
>> + SND_SOC_DAPM_OUT_DRV("Left+ Driver", BLOCK_EN, LOLP_EN, 0, NULL, 0),
>> + SND_SOC_DAPM_OUTPUT("LORP"),
>> + SND_SOC_DAPM_OUTPUT("LOLP"),
>> +
>> + SND_SOC_DAPM_INPUT("ADC IN Right"),
>> + SND_SOC_DAPM_INPUT("ADC IN Left"),
>> + SND_SOC_DAPM_MUX("ADC PGA Right Sel", SND_SOC_NOPM, 0, 0,
>> + &a1_adc_pga_right_mux),
>> + SND_SOC_DAPM_MUX("ADC PGA Left Sel", SND_SOC_NOPM, 0, 0,
>> + &a1_adc_pga_left_mux),
>> + SND_SOC_DAPM_PGA("ADC PGA Right", BLOCK_EN, PGAR_EN, 0, NULL, 0),
>> + SND_SOC_DAPM_PGA("ADC PGA Left", BLOCK_EN, PGAL_EN, 0, NULL, 0),
>> + SND_SOC_DAPM_ADC("ADC Right", NULL, BLOCK_EN, ADCR_EN, 0),
>> + SND_SOC_DAPM_ADC("ADC Left", NULL, BLOCK_EN, ADCL_EN, 0),
>> + SND_SOC_DAPM_MUX("ADC Right Sel", SND_SOC_NOPM, 0, 0, &a1_adc_right_mux),
>> + SND_SOC_DAPM_MUX("ADC Left Sel", SND_SOC_NOPM, 0, 0, &a1_adc_left_mux),
>> + SND_SOC_DAPM_AIF_OUT("ADC OUT Right", NULL, 0, SND_SOC_NOPM, 0, 0),
>> + SND_SOC_DAPM_AIF_OUT("ADC OUT Left", NULL, 0, SND_SOC_NOPM, 0, 0),
>> +};
>> +
>> +static const struct snd_soc_dapm_route a1_t9015_dapm_routes[] = {
>> + { "Right IN", NULL, "Playback" },
>> + { "Left IN", NULL, "Playback" },
>> + { "Right DAC Sel", "Right", "Right IN" },
>> + { "Right DAC Sel", "Left", "Left IN" },
>> + { "Left DAC Sel", "Right", "Right IN" },
>> + { "Left DAC Sel", "Left", "Left IN" },
>> + { "Right DAC", NULL, "Right DAC Sel" },
>> + { "Left DAC", NULL, "Left DAC Sel" },
>> + { "Right+ Driver Sel", "Right DAC", "Right DAC" },
>> + { "Right+ Driver Sel", "Left DAC Inverted", "Right DAC" },
>> + { "Left+ Driver Sel", "Left DAC", "Left DAC" },
>> + { "Left+ Driver Sel", "Right DAC Inverted", "Left DAC" },
>> + { "Right+ Driver", NULL, "Right+ Driver Sel" },
>> + { "Left+ Driver", NULL, "Left+ Driver Sel" },
>> + { "LORP", NULL, "Right+ Driver", },
>> + { "LOLP", NULL, "Left+ Driver", },
>> +
>> + { "ADC PGA Right Sel", "Differential", "ADC IN Right" },
>> + { "ADC PGA Right Sel", "Positive", "ADC IN Right" },
>> + { "ADC PGA Right Sel", "Negative", "ADC IN Right" },
>> + { "ADC PGA Left Sel", "Differential", "ADC IN Left" },
>> + { "ADC PGA Left Sel", "Positive", "ADC IN Left" },
>> + { "ADC PGA Left Sel", "Negative", "ADC IN Left" },
>> + { "ADC PGA Right", NULL, "ADC PGA Right Sel" },
>> + { "ADC PGA Left", NULL, "ADC PGA Left Sel" },
>> + { "ADC Right", NULL, "ADC PGA Right" },
>> + { "ADC Left", NULL, "ADC PGA Left" },
>> + { "ADC Right Sel", "Right", "ADC Right" },
>> + { "ADC Right Sel", "Left", "ADC Left" },
>> + { "ADC Left Sel", "Right", "ADC Right" },
>> + { "ADC Left Sel", "Left", "ADC Left" },
>> + { "ADC OUT Right", NULL, "ADC Right Sel" },
>> + { "ADC OUT Left", NULL, "ADC Left Sel" },
>> + { "Capture", NULL, "ADC OUT Right" },
>> + { "Capture", NULL, "ADC OUT Left" },
>> +};
>> +
>> static int t9015_set_bias_level(struct snd_soc_component *component,
>> enum snd_soc_bias_level level)
>> {
>> @@ -241,6 +465,18 @@ static int t9015_component_probe(struct snd_soc_component *component)
>> return 0;
>> }
>>
>> +static int a1_t9015_component_probe(struct snd_soc_component *component)
>> +{
>> + /*
>> + * This configuration was stealed from original Amlogic's driver to
>> + * reproduce the behavior of the driver more accurately. However, it is
>> + * not known for certain what it actually affects.
>> + */
>> + snd_soc_component_write(component, POWER_CFG, 0x00010000);
>> +
>> + return 0;
>> +}
>> +
>> static const struct snd_soc_component_driver t9015_codec_driver = {
>> .probe = t9015_component_probe,
>> .set_bias_level = t9015_set_bias_level,
>> @@ -254,6 +490,19 @@ static const struct snd_soc_component_driver t9015_codec_driver = {
>> .endianness = 1,
>> };
>>
>> +static const struct snd_soc_component_driver a1_t9015_codec_driver = {
>> + .probe = a1_t9015_component_probe,
>> + .set_bias_level = t9015_set_bias_level,
>> + .controls = a1_t9015_snd_controls,
>> + .num_controls = ARRAY_SIZE(a1_t9015_snd_controls),
>> + .dapm_widgets = a1_t9015_dapm_widgets,
>> + .num_dapm_widgets = ARRAY_SIZE(a1_t9015_dapm_widgets),
>> + .dapm_routes = a1_t9015_dapm_routes,
>> + .num_dapm_routes = ARRAY_SIZE(a1_t9015_dapm_routes),
>> + .suspend_bias_off = 1,
>> + .endianness = 1,
>> +};
>> +
>> static int t9015_probe(struct platform_device *pdev)
>> {
>> struct device *dev = &pdev->dev;
>> @@ -315,11 +564,21 @@ static const struct t9015_match_data t9015_match_data = {
>> .max_register = POWER_CFG,
>> };
>>
>> +static const struct t9015_match_data a1_t9015_match_data = {
>> + .component_drv = &a1_t9015_codec_driver,
>> + .dai_drv = &a1_t9015_dai,
>> + .max_register = LINEIN_CFG,
>> +};
>> +
>> static const struct of_device_id t9015_ids[] __maybe_unused = {
>> {
>> .compatible = "amlogic,t9015",
>> .data = &t9015_match_data,
>> },
>> + {
>> + .compatible = "amlogic,t9015-a1",
>> + .data = &a1_t9015_match_data,
>> + },
>> { }
>> };
>> MODULE_DEVICE_TABLE(of, t9015_ids);
>
>
--
Best regards
Jan Dakinevich
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2024-03-19 0:18 UTC|newest]
Thread overview: 85+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-14 23:21 [PATCH 00/25] Introduce support of audio for Amlogic A1 SoC family Jan Dakinevich
2024-03-14 23:21 ` [PATCH 01/25] clk: meson: a1: restrict an amount of 'hifi_pll' params Jan Dakinevich
2024-03-15 8:58 ` Jerome Brunet
2024-03-17 14:17 ` Jan Dakinevich
2024-03-18 10:17 ` Jerome Brunet
2024-03-18 22:35 ` Jan Dakinevich
2024-03-19 8:21 ` Jerome Brunet
2024-03-19 13:53 ` Dmitry Rokosov
2024-03-14 23:21 ` [PATCH 02/25] clk: meson: axg: move reset controller's code to separate module Jan Dakinevich
2024-03-14 23:21 ` [PATCH 03/25] dt-bindings: clock: meson: add A1 audio clock and reset controller bindings Jan Dakinevich
2024-03-15 9:56 ` Krzysztof Kozlowski
2024-03-14 23:21 ` [PATCH 04/25] clk: meson: a1: add the audio clock controller driver Jan Dakinevich
2024-03-15 9:20 ` Jerome Brunet
2024-03-19 1:47 ` Jan Dakinevich
2024-03-19 8:30 ` Jerome Brunet
2024-03-23 18:02 ` Jan Dakinevich
2024-03-26 15:26 ` Jerome Brunet
2024-03-26 18:44 ` Jan Dakinevich
2024-03-27 12:57 ` Jerome Brunet
2024-03-14 23:21 ` [PATCH 05/25] ASoC: meson: codec-glue: add support for capture stream Jan Dakinevich
2024-03-14 23:21 ` [PATCH 06/25] ASoC: meson: g12a-toacodec: fix "Lane Select" width Jan Dakinevich
2024-03-15 10:00 ` Jerome Brunet
2024-03-15 13:17 ` Dan Carpenter
2024-03-24 17:51 ` Jan Dakinevich
2024-03-14 23:21 ` [PATCH 07/25] ASoC: meson: g12a-toacodec: rework the definition of bits Jan Dakinevich
2024-03-14 23:21 ` [PATCH 08/25] ASoC: dt-bindings: meson: g12a-toacodec: add support for A1 SoC family Jan Dakinevich
2024-03-15 9:58 ` Krzysztof Kozlowski
2024-03-17 14:29 ` Jan Dakinevich
2024-03-17 14:46 ` Krzysztof Kozlowski
2024-03-17 15:11 ` Jan Dakinevich
2024-03-14 23:21 ` [PATCH 09/25] ASoC: " Jan Dakinevich
2024-03-15 13:33 ` Mark Brown
2024-03-17 15:19 ` Jan Dakinevich
2024-03-18 10:42 ` Jerome Brunet
2024-03-18 13:30 ` Mark Brown
2024-03-14 23:21 ` [PATCH 10/25] ASoC: meson: t9015: prepare to adding new platforms Jan Dakinevich
2024-03-14 23:21 ` [PATCH 11/25] ASoC: dt-bindings: meson: t9015: add support for A1 SoC family Jan Dakinevich
2024-03-17 19:03 ` Rob Herring
2024-03-17 23:39 ` Jan Dakinevich
2024-03-18 7:46 ` Krzysztof Kozlowski
2024-03-14 23:21 ` [PATCH 12/25] ASoC: " Jan Dakinevich
2024-03-15 13:36 ` Mark Brown
2024-03-17 16:27 ` Jan Dakinevich
2024-03-18 13:48 ` Mark Brown
2024-03-18 22:43 ` Jan Dakinevich
2024-03-18 10:46 ` Jerome Brunet
2024-03-19 0:17 ` Jan Dakinevich [this message]
2024-03-14 23:21 ` [PATCH 13/25] ASoC: dt-bindings: meson: axg-pdm: document 'sysrate' property Jan Dakinevich
2024-03-15 10:00 ` Krzysztof Kozlowski
2024-03-15 10:22 ` Jerome Brunet
2024-03-17 15:52 ` Jan Dakinevich
2024-03-18 10:55 ` Jerome Brunet
2024-03-18 12:19 ` Jerome Brunet
2024-03-19 0:30 ` Jan Dakinevich
2024-03-19 0:35 ` Jan Dakinevich
2024-03-19 5:17 ` Krzysztof Kozlowski
2024-03-17 15:55 ` Jan Dakinevich
2024-03-17 16:27 ` Krzysztof Kozlowski
2024-03-17 16:35 ` Jan Dakinevich
2024-03-19 5:17 ` Krzysztof Kozlowski
2024-03-14 23:21 ` [PATCH 14/25] ASoC: meson: axg-pdm: introduce " Jan Dakinevich
2024-03-14 23:21 ` [PATCH 15/25] pinctrl/meson: fix typo in PDM's pin name Jan Dakinevich
2024-03-14 23:21 ` [PATCH 16/25] ASoC: dt-bindings: meson: meson-axg-audio-arb: claim support of A1 SoC family Jan Dakinevich
2024-03-17 19:10 ` Rob Herring
2024-03-14 23:21 ` [PATCH 17/25] ASoC: dt-bindings: meson: axg-fifo: " Jan Dakinevich
2024-03-17 19:13 ` Rob Herring
2024-03-14 23:21 ` [PATCH 18/25] ASoC: dt-bindings: meson: axg-pdm: " Jan Dakinevich
2024-03-17 19:14 ` Rob Herring
2024-03-14 23:21 ` [PATCH 19/25] ASoC: dt-bindings: meson: axg-sound-card: " Jan Dakinevich
2024-03-15 10:06 ` Jerome Brunet
2024-03-17 16:39 ` Jan Dakinevich
2024-03-14 23:21 ` [PATCH 20/25] ASoC: dt-bindings: meson: axg-tdm-formatters: " Jan Dakinevich
2024-03-17 19:16 ` Rob Herring
2024-03-14 23:21 ` [PATCH 21/25] ASoC: dt-bindings: meson: axg-tdm-iface: " Jan Dakinevich
2024-03-15 10:13 ` Jerome Brunet
2024-03-14 23:21 ` [PATCH 22/25] ASoC: dt-bindings: meson: introduce link-name optional property Jan Dakinevich
2024-03-17 19:45 ` Rob Herring
2024-03-18 7:27 ` Dmitry Rokosov
2024-03-14 23:21 ` [PATCH 23/25] ASoC: meson: implement link-name optional property in meson card utils Jan Dakinevich
2024-03-14 23:22 ` [PATCH 24/25] arm64: dts: meson: a1: add audio devices Jan Dakinevich
2024-03-14 23:22 ` [PATCH 25/25] arm64: dts: ad402: enable audio Jan Dakinevich
2024-03-15 10:01 ` [PATCH 00/25] Introduce support of audio for Amlogic A1 SoC family Jerome Brunet
2024-03-15 15:50 ` Rob Herring
2024-03-15 16:53 ` Neil Armstrong
2024-03-18 7:30 ` Dmitry Rokosov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=340ee66a-da5d-4fd5-95a6-ea22839df988@salutedevices.com \
--to=jan.dakinevich@salutedevices.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=kernel@salutedevices.com \
--cc=khilman@baylibre.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=mturquette@baylibre.com \
--cc=neil.armstrong@linaro.org \
--cc=p.zabel@pengutronix.de \
--cc=perex@perex.cz \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox