From: narmstrong@baylibre.com (Neil Armstrong)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 0/7] Add support for AmLogic GXBB clock controller
Date: Fri, 10 Jun 2016 11:12:18 +0200 [thread overview]
Message-ID: <575A8472.3090403@baylibre.com> (raw)
In-Reply-To: <1465518774-26924-1-git-send-email-mturquette@baylibre.com>
On 06/10/2016 02:32 AM, Michael Turquette wrote:
> This series is based on the AmLogic Meson8b rewrite/cleanup[0]. The
> AmLogic GXBB is an ARMv8-based SoC, fed by a 24MHZ xtal, and it provides
> several PLLs, muxes dividers and gates to drive CPUs and peripherals.
>
> While based on the Meson8b clock controller driver, this series adds
> supports for Multi-phase Locked Loops (mpll) and support for PLLs with
> fractional rates.
>
> This series introduces the clock controller driver for the gxbb,
> including the DT binding description and accompanying change in the gxbb
> dtsi. Only three clocks are exposed via the headers in the dt-bindings
> include-chroot. More can be added later, but since these values
> represent an ABI I wanted to start small. I'm not sure about the names
> for the gate clocks, so I especially tried to avoid putting those in the
> binding (with the exception of the Ethernet gate, which Kevin has needed
> for a while).
>
> Notably missing from this driver are the branch clocks (e.g. the mess of
> muxes and dividers that come after the PLLs and MPLLs). I could have
> guessed how things were wired up from the resources available to me, but
> I'm hoping to get some improved documentation soon and then I'll go back
> and fill them in.
>
> [0] http://lkml.kernel.org/g/1465518467-23939-1-git-send-email-mturquette at baylibre.com
>
> Michael Turquette (7):
> clk: meson: add peripheral gate macro
> clk: meson: add mpll support
> clk: meson: fractional pll support
> clk: gxbb: Document bindings for the GXBB clock controller
> clk: gxbb: add AmLogic GXBB clk controller driver
> arm64: amlogic: select gxbb clk driver
> arm64: dts: gxbb clock controller
>
> .../bindings/clock/amlogic,gxbb-clkc.txt | 36 +
> arch/arm64/Kconfig.platforms | 2 +
> arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 7 +
> drivers/clk/meson/Kconfig | 7 +
> drivers/clk/meson/Makefile | 3 +-
> drivers/clk/meson/clk-mpll.c | 94 ++
> drivers/clk/meson/clk-pll.c | 32 +-
> drivers/clk/meson/clkc.h | 39 +
> drivers/clk/meson/gxbb.c | 954 +++++++++++++++++++++
> drivers/clk/meson/gxbb.h | 271 ++++++
> include/dt-bindings/clock/gxbb-clkc.h | 12 +
> 11 files changed, 1454 insertions(+), 3 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
> create mode 100644 drivers/clk/meson/clk-mpll.c
> create mode 100644 drivers/clk/meson/gxbb.c
> create mode 100644 drivers/clk/meson/gxbb.h
> create mode 100644 include/dt-bindings/clock/gxbb-clkc.h
>
Mike,
I did not receive the 5/7 on the mailing list, can you resend ?
Neil
next prev parent reply other threads:[~2016-06-10 9:12 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-10 0:32 [PATCH 0/7] Add support for AmLogic GXBB clock controller Michael Turquette
2016-06-10 0:32 ` [PATCH 1/7] clk: meson: add peripheral gate macro Michael Turquette
2016-06-10 0:32 ` [PATCH 2/7] clk: meson: add mpll support Michael Turquette
2016-06-10 0:32 ` [PATCH 3/7] clk: meson: fractional pll support Michael Turquette
2016-06-10 0:32 ` [PATCH 4/7] clk: gxbb: Document bindings for the GXBB clock controller Michael Turquette
2016-06-10 0:32 ` [PATCH 5/7] clk: gxbb: add AmLogic GXBB clk controller driver Michael Turquette
2016-06-10 0:32 ` [PATCH 6/7] arm64: amlogic: select gxbb clk driver Michael Turquette
2016-06-10 0:32 ` [PATCH 7/7] arm64: dts: gxbb clock controller Michael Turquette
2016-06-14 19:01 ` Kevin Hilman
2016-06-15 1:41 ` Michael Turquette
2016-06-10 9:12 ` Neil Armstrong [this message]
2016-06-13 17:55 ` [PATCH 0/7] Add support for AmLogic GXBB " Kevin Hilman
2016-06-14 5:02 ` Neil Armstrong
2016-06-14 18:59 ` Kevin Hilman
2016-06-15 1:41 ` Michael Turquette
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=575A8472.3090403@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).