From: narmstrong@baylibre.com (Neil Armstrong)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 0/2] pinctrl: Enable support for external GPIO interrupts
Date: Tue, 28 Jun 2016 10:06:55 +0200 [thread overview]
Message-ID: <5772301F.3030904@baylibre.com> (raw)
> From: Carlo Caione <carlo@endlessm.com>
>
> In Meson SoCs we have 8 independent GPIO interrupts that can be programmed to
> use any of the GPIOs in the chip as interrupt source.
>
> These GPIOs are managed by GIC but they can be conditioned (and enabled) by
> some registers external to the GIC.
>
> GPIOs |--[mux1 or mux2]--[polarity]--[filter]--[edge_select]--> GIC
>
> The original work has been done by Beniamino. I cleaned it up, fixed a couple
> of bugs, added support for Meson8b and the fix for the .to_irq hook.
Hi Carlo, Linus,
I have another implementation idea about this subject, by using static GPIO-irq
association in DT instead of using a very complex dynamic allocation.
The idea is to add a simple property :
irqs-gpios = <>
To map a GPIO to the irqs, then we can either use the DT irq mapping or use the
gpiolib to_irq() if the gpio is in the table.
The relative drawback is that we will need DT changes to enable routing of a gpio
to an IRQ, but the complete system is based on a DT description anyway.
In this case, we could use gpiochip_irqchip.
Do you think this structure would be acceptable ?
Neil
> Beniamino Galvani (2):
> pinctrl: meson: Enable GPIO IRQs
> pinctrl: dt-binding: Extend meson documentation with GPIO IRQs support
>
> .../devicetree/bindings/pinctrl/meson,pinctrl.txt | 12 +
> drivers/pinctrl/Kconfig | 1 +
> drivers/pinctrl/meson/pinctrl-meson.c | 254 +++++++++++++++++++++
> drivers/pinctrl/meson/pinctrl-meson.h | 18 +-
> drivers/pinctrl/meson/pinctrl-meson8.c | 36 +--
> drivers/pinctrl/meson/pinctrl-meson8b.c | 36 +--
> 6 files changed, 326 insertions(+), 31 deletions(-)
>
> --
> 1.9.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2016-06-28 8:06 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-28 8:06 Neil Armstrong [this message]
2016-06-29 8:53 ` [PATCH 0/2] pinctrl: Enable support for external GPIO interrupts Linus Walleij
2016-06-29 14:07 ` Carlo Caione
2016-06-29 14:41 ` Daniel Drake
2016-07-04 11:21 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5772301F.3030904@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox