From mboxrd@z Thu Jan 1 00:00:00 1970 From: afaerber@suse.de (=?UTF-8?Q?Andreas_F=c3=a4rber?=) Date: Sun, 3 Jul 2016 17:57:00 +0200 Subject: [PATCH] ARM64: dts: amlogic: Add basic support for Amlogic S905X In-Reply-To: <1467399478-7183-1-git-send-email-carlo@caione.org> References: <1467399478-7183-1-git-send-email-carlo@caione.org> Message-ID: <577935CC.80001@suse.de> To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org Am 01.07.2016 um 20:57 schrieb Carlo Caione: > From: Carlo Caione > > This patch introduces the basic support for the Amlogic S905X (Meson > GXL) and for the Amlogic evaluation board P212. > No documentation has been released yet for this SoC, so for now only the > bare minimum has been added in the DT. > > Signed-off-by: Carlo Caione > --- > Documentation/devicetree/bindings/arm/amlogic.txt | 5 + > arch/arm64/boot/dts/amlogic/Makefile | 1 + > arch/arm64/boot/dts/amlogic/meson-gxl-p212.dts | 70 +++++++++ > arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 179 ++++++++++++++++++++++ > 4 files changed, 255 insertions(+) > create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-p212.dts > create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi I don't have documentation either, but looks sane to me. Reviewed-by: Andreas F?rber With the recent driver progress have you checked whether /memory at 0 actually works or whether U-Boot gives us a /memory node that Linux is using instead? Regards, Andreas -- SUSE Linux GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany GF: Felix Imend?rffer, Jane Smithard, Graham Norton HRB 21284 (AG N?rnberg)