* [GIT PULL] Amlogic 64-bit DT updates for 4.14 (round 3, late)
@ 2017-09-05 19:17 Kevin Hilman
2017-09-15 21:59 ` Olof Johansson
0 siblings, 1 reply; 3+ messages in thread
From: Kevin Hilman @ 2017-09-05 19:17 UTC (permalink / raw)
To: linus-amlogic
Olof, Arnd,
I'm aware this is pretty late, so feel free to include in a late branch,
or we can wait and send after -rc1. It's late because the corresponding
drivers/mmc change just got merged.
Thanks,
Kevin
The following changes since commit 47884c5c746ee7c02e06fbf60480e0f13aa11dfe:
ARM64: dts: meson-gxl-libretech-cc: Add GPIO lines names (2017-08-22 15:37:50 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git tags/amlogic-dt64-3
for you to fetch changes up to 485a308f05d843034b6e82f688704c44888aecde:
ARM64: dts: meson-gxbb: nanopi-k2: enable sdr104 mode (2017-09-05 12:05:01 -0700)
----------------------------------------------------------------
Amlogic 64-bit DT updates for v4.14 (round 3)
- updates for new MMC driver features/fixes
- support high-speed modes
----------------------------------------------------------------
Jerome Brunet (9):
ARM64: dts: meson-gx: Use correct mmc clock source 0
ARM64: dts: meson: remove cap-sd-highspeed from emmc nodes
ARM64: dts: meson: add mmc clk gate pins
ARM64: dts: meson-gxbb: nanopi-k2: add card regulator settle times
ARM64: dts: meson-gxl: libretech-cc: add card regulator settle times
ARM64: dts: meson-gxl: libretech-cc: enable high speed modes
ARM64: dts: meson-gxbb: p20x: enable sdcard UHS modes
ARM64: dts: meson-gxbb: nanopi-k2: enable sdcard UHS modes
ARM64: dts: meson-gxbb: nanopi-k2: enable sdr104 mode
arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 10 ++++++----
arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 19 ++++++++++++++-----
arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 12 +++++++-----
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 9 +++++----
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 13 +++++++++----
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 10 ++++++----
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 39 ++++++++++++++++++++++++++++++++++++---
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts | 7 ++++---
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 13 +++++++++++--
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts | 10 ++++++----
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 10 ++++++----
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 39 ++++++++++++++++++++++++++++++++++++---
arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 7 ++++---
arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts | 1 -
14 files changed, 150 insertions(+), 49 deletions(-)
^ permalink raw reply [flat|nested] 3+ messages in thread
* [GIT PULL] Amlogic 64-bit DT updates for 4.14 (round 3, late)
2017-09-05 19:17 [GIT PULL] Amlogic 64-bit DT updates for 4.14 (round 3, late) Kevin Hilman
@ 2017-09-15 21:59 ` Olof Johansson
2017-09-27 14:55 ` Kevin Hilman
0 siblings, 1 reply; 3+ messages in thread
From: Olof Johansson @ 2017-09-15 21:59 UTC (permalink / raw)
To: linus-amlogic
Hi,
On Tue, Sep 5, 2017 at 12:17 PM, Kevin Hilman <khilman@baylibre.com> wrote:
> Olof, Arnd,
>
> I'm aware this is pretty late, so feel free to include in a late branch,
> or we can wait and send after -rc1. It's late because the corresponding
> drivers/mmc change just got merged.
>
> Thanks,
>
> Kevin
>
>
> The following changes since commit 47884c5c746ee7c02e06fbf60480e0f13aa11dfe:
>
> ARM64: dts: meson-gxl-libretech-cc: Add GPIO lines names (2017-08-22 15:37:50 -0700)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git tags/amlogic-dt64-3
>
> for you to fetch changes up to 485a308f05d843034b6e82f688704c44888aecde:
>
> ARM64: dts: meson-gxbb: nanopi-k2: enable sdr104 mode (2017-09-05 12:05:01 -0700)
>
> ----------------------------------------------------------------
> Amlogic 64-bit DT updates for v4.14 (round 3)
> - updates for new MMC driver features/fixes
> - support high-speed modes
I decided to merge into next/late, will send this afternoon or
tomorrow together with a few other changes.
-Olof
^ permalink raw reply [flat|nested] 3+ messages in thread
* [GIT PULL] Amlogic 64-bit DT updates for 4.14 (round 3, late)
2017-09-15 21:59 ` Olof Johansson
@ 2017-09-27 14:55 ` Kevin Hilman
0 siblings, 0 replies; 3+ messages in thread
From: Kevin Hilman @ 2017-09-27 14:55 UTC (permalink / raw)
To: linus-amlogic
Hi Olof,
Olof Johansson <olof@lixom.net> writes:
> On Tue, Sep 5, 2017 at 12:17 PM, Kevin Hilman <khilman@baylibre.com> wrote:
>> Olof, Arnd,
>>
>> I'm aware this is pretty late, so feel free to include in a late branch,
>> or we can wait and send after -rc1. It's late because the corresponding
>> drivers/mmc change just got merged.
>>
>> Thanks,
>>
>> Kevin
>>
>>
>> The following changes since commit 47884c5c746ee7c02e06fbf60480e0f13aa11dfe:
>>
>> ARM64: dts: meson-gxl-libretech-cc: Add GPIO lines names (2017-08-22 15:37:50 -0700)
>>
>> are available in the git repository at:
>>
>> git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git tags/amlogic-dt64-3
>>
>> for you to fetch changes up to 485a308f05d843034b6e82f688704c44888aecde:
>>
>> ARM64: dts: meson-gxbb: nanopi-k2: enable sdr104 mode (2017-09-05 12:05:01 -0700)
>>
>> ----------------------------------------------------------------
>> Amlogic 64-bit DT updates for v4.14 (round 3)
>> - updates for new MMC driver features/fixes
>> - support high-speed modes
>
> I decided to merge into next/late, will send this afternoon or
> tomorrow together with a few other changes.
hmm, it doesn't look like this made it into -rc1 or -rc2. Were there
any problems?
Kevin
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2017-09-27 14:55 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-09-05 19:17 [GIT PULL] Amlogic 64-bit DT updates for 4.14 (round 3, late) Kevin Hilman
2017-09-15 21:59 ` Olof Johansson
2017-09-27 14:55 ` Kevin Hilman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).