From: khilman@baylibre.com (Kevin Hilman)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH] ARM64: dts: meson: disable sd-uhs modes on the libretech-cc
Date: Fri, 27 Apr 2018 12:15:39 -0700 [thread overview]
Message-ID: <7hvacczcis.fsf@baylibre.com> (raw)
In-Reply-To: <20180426105046.14817-1-jbrunet@baylibre.com> (Jerome Brunet's message of "Thu, 26 Apr 2018 12:50:46 +0200")
Jerome Brunet <jbrunet@baylibre.com> writes:
> There is a problem with the sd-uhs mode when doing a soft reboot.
> Switching back from 1.8v to 3.3v messes with the card, which no longer
> respond (timeout errors). According to the specification, we should
> perform a card reset (power cycling the card) but this is something we
> cannot control on this design.
>
> Then the only solution to restore the communication with the card is an
> "unplug-plug" which is not acceptable
>
> Until we find a solution, if any, disable the sd-uhs modes on this design.
> For the people using uhs at the moment, there will a performance drop as
> a result.
>
> Fixes: 3cde63ebc85c ("ARM64: dts: meson-gxl: libretech-cc: enable high speed modes")
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Applied to v4.17/fixes, and adding a Cc to stable.
Thanks,
Kevin
prev parent reply other threads:[~2018-04-27 19:15 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-26 10:50 [PATCH] ARM64: dts: meson: disable sd-uhs modes on the libretech-cc Jerome Brunet
2018-04-27 19:15 ` Kevin Hilman [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7hvacczcis.fsf@baylibre.com \
--to=khilman@baylibre.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).