Re: [PATCH v6 1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub

[Anand Moon <linux.amoon@gmail.com>]

Hi Rob,

On Wed, 6 Dec 2023 at 19:23, Rob Herring <robh@kernel.org> wrote:
>
> On Mon, Dec 04, 2023 at 08:14:25PM +0530, Anand Moon wrote:
> > Add the binding example for the USB3.1 Genesys Logic GL3523
> > integrates with USB 3.1 Gen 1 Super Speed and USB 2.0 High-Speed
> > hub.
> >
> > For onboard hub controllers that support USB 3.x and USB 2.0 hubs
> > with shared resets and power supplies, this property is used to identify
> > the hubs with which these are shared.
> >
> > GL3523 has built-in 5V to 3.3V and 5V to 1.2V regulators, which serves
> > power to the USB HUB, it uses 5V power regulator.
> >
> > Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> > Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> > ---
> > V6: fix the description of the regulators
> > Updated the commit message for regulator updates.
> > add reviewed by Conor Dooley
> > [1] https://lore.kernel.org/all/20231130053130.21966-2-linux.amoon@gmail.com/
> > v5: upgrade peer-hub description : Conor Dooley
> > [0] https://www.genesyslogic.com.tw/en/product_view.php?show=67 [Block Diagram]
> > v4: Fix the description of peer-hub and update the commit message.
> > Schematics of the Odroid N2+
> > https://dn.odroid.com/S922X/ODROID-N2/Schematic/odroid-n2_rev0.6_20210121.pdf
> > V3: fix the dt_binding_check error, added new example for Genesys GL3523
> > v2: added Genesys GL3523 binding
> > v1: none
> > ---
> >  .../bindings/usb/genesys,gl850g.yaml          | 65 +++++++++++++++++--
> >  1 file changed, 61 insertions(+), 4 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
> > index ee08b9c3721f..c6f63a69396d 100644
> > --- a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
> > +++ b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
> > @@ -9,9 +9,6 @@ title: Genesys Logic USB hub controller
> >  maintainers:
> >    - Icenowy Zheng <uwu@icenowy.me>
> >
> > -allOf:
> > -  - $ref: usb-device.yaml#
> > -
> >  properties:
> >    compatible:
> >      enum:
> > @@ -27,12 +24,46 @@ properties:
> >
> >    vdd-supply:
> >      description:
> > -      the regulator that provides 3.3V core power to the hub.
> > +      The regulator that provides 3.3V or 5.0V core power to the hub.
> > +
> > +  peer-hub:
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +    description:
> > +      For onboard hub controllers that support USB 3.x and USB 2.0 hubs
> > +      with shared resets and power supplies, this property is used to identify
> > +      the hubs with which these are shared.
> >
> >  required:
> >    - compatible
> >    - reg
> >
> > +allOf:
> > +  - $ref: usb-device.yaml#
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            enum:
> > +              - usb5e3,608
> > +    then:
> > +      properties:
> > +        peer-hub: false
> > +        vdd-supply: false
> > +        reset-gpios: true
> > +
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            enum:
> > +              - usb5e3,610
> > +              - usb5e3,620
> > +    then:
> > +      properties:
> > +        peer-hub: true
> > +        vdd-supply: true
> > +        reset-gpios: true
>
> No need for this if schema. The default is they are allowed.
>

If I move reset-gpios to required, I observe the below warning.

  DTC_CHK Documentation/devicetree/bindings/usb/maxim,max33359.example.dtb
/home/alarm/linux-amlogic-5.y-devel/Documentation/devicetree/bindings/usb/usb-device.example.dtb:
hub@1: 'reset-gpio' is a required property
        from schema $id: http://devicetree.org/schemas/usb/genesys,gl850g.yaml#
  DTC_CHK Documentation/devicetree/bindings/usb/mediatek,musb.example.dtb
  DTC_CHK Documentation/devicetree/bindings/usb/usb251xb.example.dtb
  DTC_CHK Documentation/devicetree/bindings/usb/realtek,rts5411.example.dtb
/home/alarm/linux-amlogic-5.y-devel/Documentation/devicetree/bindings/usb/genesys,gl850g.example.dtb:
hub@1: 'reset-gpio' is a required property
        from schema $id: http://devicetree.org/schemas/usb/genesys,gl850g.yaml#
  DTC_CHK Documentation/devicetree/bindings/usb/brcm,bdc.example.dtb
/home/alarm/linux-amlogic-5.y-devel/Documentation/devicetree/bindings/usb/genesys,gl850g.example.dtb:
hub@1: 'reset-gpio' is a required property
        from schema $id: http://devicetree.org/schemas/usb/genesys,gl850g.yaml#
  DTC_CHK Documentation/devicetree/bindings/usb/xlnx,usb2.example.dtb
/home/alarm/linux-amlogic-5.y-devel/Documentation/devicetree/bindings/usb/genesys,gl850g.example.dtb:
hub@2: 'reset-gpio' is a required property
        from schema $id: http://devicetree.org/schemas/usb/genesys,gl850g.yaml#
  DTC_CHK Documentation/devicetree/bindings/usb/starfive,jh7110-usb.example.dtb

> Rob

Thanks
-Anand

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic