linux-amlogic.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: hkallweit1@gmail.com (Heiner Kallweit)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 0/5 RfC] pintrl: meson: add support for GPIO IRQs
Date: Sun, 7 May 2017 18:19:22 +0200	[thread overview]
Message-ID: <a4ca587b-d3e8-a22d-4d25-289871d2d095@gmail.com> (raw)

This patch series is partially based on a series Jerome Brunet
submitted about half a year ago. Due to open questions this series never
made it to mainline, see https://patchwork.kernel.org/patch/9384431/

This new attempt uses GPIOLIB_IRQCHIP resulting in less needed code.
Included is also support for using two parent IRQs in case
of IRQ_TYPE_EDGE_BOTH, like in the vendor driver.

Worth to be mentioned is also that I had to work around a strange
issue with spurious interrupts resulting in a deadlock.
The affected critical section in __setup_irq is executed with interrupts
disabled, nevertheless spurious GPIO IRQs result in a deadlock what
seems to indicate that they are handled on the same CPU.
I didn't find a better explanation than a possible HW flaw so far.

The series was successfully tested on a Odroid-C2, e.g. with removing
polling for SD card insertion/removal from the mmc driver.

Heiner Kallweit (5):
  pinctrl: meson: add interrupts to pinctrl data
  pinctrl: meson: document GPIO IRQ DT binding
  pinctrl: meson: add DT node for GPIO IRQ on Meson GX
  pinctrl: meson: add DT node for GPIO IRQ on Meson 8 / 8b
  pinctrl: meson: add support for GPIO interrupts

 .../bindings/gpio/amlogic,meson-gpio-interrupt.txt |  30 ++
 arch/arm/boot/dts/meson8.dtsi                      |  13 +
 arch/arm/boot/dts/meson8b.dtsi                     |  13 +
 arch/arm64/boot/dts/amlogic/meson-gx.dtsi          |  13 +
 drivers/pinctrl/Kconfig                            |   1 +
 drivers/pinctrl/meson/pinctrl-meson-gxbb.c         |  22 +-
 drivers/pinctrl/meson/pinctrl-meson-gxl.c          |  20 +-
 drivers/pinctrl/meson/pinctrl-meson.c              | 338 ++++++++++++++++++++-
 drivers/pinctrl/meson/pinctrl-meson.h              |  27 +-
 drivers/pinctrl/meson/pinctrl-meson8.c             |  20 +-
 drivers/pinctrl/meson/pinctrl-meson8b.c            |  32 +-
 11 files changed, 482 insertions(+), 47 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/gpio/amlogic,meson-gpio-interrupt.txt

-- 
2.12.2

             reply	other threads:[~2017-05-07 16:19 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-07 16:19 Heiner Kallweit [this message]
2017-05-07 16:34 ` [PATCH 1/5] pintrl: meson: add interrupts to pinctrl data Heiner Kallweit
2017-05-11 14:50   ` Linus Walleij
2017-05-11 16:08     ` Jerome Brunet
2017-05-11 19:33       ` Heiner Kallweit
2017-05-12  6:08         ` Heiner Kallweit
2017-05-12  9:51           ` Linus Walleij
2017-05-12 17:23             ` Heiner Kallweit
2017-05-07 16:34 ` [PATCH 2/5] pintrl: meson: document GPIO IRQ DT binding Heiner Kallweit
2017-05-12 19:38   ` Rob Herring
2017-05-12 21:41     ` Heiner Kallweit
2017-05-16  0:31       ` Rob Herring
2017-05-07 16:34 ` [PATCH 3/5] pintrl: meson: add DT node for GPIO IRQ on Meson GX Heiner Kallweit
2017-05-07 16:34 ` [PATCH 4/5] pintrl: meson: add DT node for GPIO IRQ on Meson 8 / 8b Heiner Kallweit
2017-05-07 16:34 ` [PATCH 5/5] pintrl: meson: add support for GPIO interrupts Heiner Kallweit
2017-05-11 15:10   ` Linus Walleij
2017-05-11 14:34 ` [PATCH 0/5 RfC] pintrl: meson: add support for GPIO IRQs Linus Walleij
2017-05-11 20:52   ` Martin Blumenstingl

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a4ca587b-d3e8-a22d-4d25-289871d2d095@gmail.com \
    --to=hkallweit1@gmail.com \
    --cc=linus-amlogic@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).