From mboxrd@z Thu Jan 1 00:00:00 1970 From: hkallweit1@gmail.com (Heiner Kallweit) Date: Mon, 17 Apr 2017 17:54:26 +0200 Subject: [PATCH 1/6] serial: meson: fix setting number of stop bits In-Reply-To: <619c093d-0dcc-b771-5cf0-ae31ea723d0d@baylibre.com> References: <619c093d-0dcc-b771-5cf0-ae31ea723d0d@baylibre.com> Message-ID: To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org Am 17.04.2017 um 17:24 schrieb Neil Armstrong: > On 04/16/2017 10:06 PM, Heiner Kallweit wrote: >> The stop bit value as to be or'ed, so far this worked only just by chance >> because AML_UART_STOP_BIN_1SB is 0. >> >> Signed-off-by: Heiner Kallweit >> --- >> drivers/tty/serial/meson_uart.c | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c >> index 60f16795..e2e25da1 100644 >> --- a/drivers/tty/serial/meson_uart.c >> +++ b/drivers/tty/serial/meson_uart.c >> @@ -355,7 +355,7 @@ static void meson_uart_set_termios(struct uart_port *port, >> if (cflags & CSTOPB) >> val |= AML_UART_STOP_BIN_2SB; >> else >> - val &= ~AML_UART_STOP_BIN_1SB; >> + val |= AML_UART_STOP_BIN_1SB; >> >> if (cflags & CRTSCTS) >> val &= ~AML_UART_TWO_WIRE_EN; >> > > Hi, > > in fact you can totally drop the else statement since it's a no-op in both cases. > That's right. However I think leaving this in makes the code better understandable. And most likely the compiler will remove this no-op anyway. Heiner > Neil >