* [PATCH 1/4] mmc: pwrseq: add op reset to struct mmc_pwrseq_ops [not found] <75ad5eac-412b-fe73-ff53-3d8b975937e4@gmail.com> @ 2017-02-08 21:48 ` Heiner Kallweit 2017-03-15 10:50 ` Ulf Hansson 2017-02-08 21:49 ` [PATCH 2/4] mmc: pwrseq: implement reset operation in pwrseq_emmc Heiner Kallweit ` (2 subsequent siblings) 3 siblings, 1 reply; 9+ messages in thread From: Heiner Kallweit @ 2017-02-08 21:48 UTC (permalink / raw) To: linus-amlogic Add an operation reset to struct mmc_pwrseq_ops and related wrappers. Don't expose the pwrseq-internal reset function directly to kernel users but just to the mmc core. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> --- drivers/mmc/core/core.c | 6 ++++++ drivers/mmc/core/pwrseq.c | 8 ++++++++ drivers/mmc/core/pwrseq.h | 3 +++ include/linux/mmc/core.h | 1 + 4 files changed, 18 insertions(+) diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 926e0fde..5d5fe591 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1869,6 +1869,12 @@ void mmc_power_cycle(struct mmc_host *host, u32 ocr) mmc_power_up(host, ocr); } +void mmc_hw_reset_pwrseq(struct mmc_host *host) +{ + mmc_pwrseq_reset(host); +} +EXPORT_SYMBOL(mmc_hw_reset_pwrseq); + /* * Cleanup when the last reference to the bus operator is dropped. */ diff --git a/drivers/mmc/core/pwrseq.c b/drivers/mmc/core/pwrseq.c index 9386c477..e3ad30fa 100644 --- a/drivers/mmc/core/pwrseq.c +++ b/drivers/mmc/core/pwrseq.c @@ -76,6 +76,14 @@ void mmc_pwrseq_power_off(struct mmc_host *host) pwrseq->ops->power_off(host); } +void mmc_pwrseq_reset(struct mmc_host *host) +{ + struct mmc_pwrseq *pwrseq = host->pwrseq; + + if (pwrseq && pwrseq->ops->reset) + pwrseq->ops->reset(host); +} + void mmc_pwrseq_free(struct mmc_host *host) { struct mmc_pwrseq *pwrseq = host->pwrseq; diff --git a/drivers/mmc/core/pwrseq.h b/drivers/mmc/core/pwrseq.h index 39c911aa..819386f4 100644 --- a/drivers/mmc/core/pwrseq.h +++ b/drivers/mmc/core/pwrseq.h @@ -18,6 +18,7 @@ struct mmc_pwrseq_ops { void (*pre_power_on)(struct mmc_host *host); void (*post_power_on)(struct mmc_host *host); void (*power_off)(struct mmc_host *host); + void (*reset)(struct mmc_host *host); }; struct mmc_pwrseq { @@ -36,6 +37,7 @@ int mmc_pwrseq_alloc(struct mmc_host *host); void mmc_pwrseq_pre_power_on(struct mmc_host *host); void mmc_pwrseq_post_power_on(struct mmc_host *host); void mmc_pwrseq_power_off(struct mmc_host *host); +void mmc_pwrseq_reset(struct mmc_host *host); void mmc_pwrseq_free(struct mmc_host *host); #else @@ -49,6 +51,7 @@ static inline int mmc_pwrseq_alloc(struct mmc_host *host) { return 0; } static inline void mmc_pwrseq_pre_power_on(struct mmc_host *host) {} static inline void mmc_pwrseq_post_power_on(struct mmc_host *host) {} static inline void mmc_pwrseq_power_off(struct mmc_host *host) {} +static inline void mmc_pwrseq_reset(struct mmc_host *host) {} static inline void mmc_pwrseq_free(struct mmc_host *host) {} #endif diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h index a0c63ea2..8dbbd7a1 100644 --- a/include/linux/mmc/core.h +++ b/include/linux/mmc/core.h @@ -166,6 +166,7 @@ int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd, int retries); int mmc_hw_reset(struct mmc_host *host); +void mmc_hw_reset_pwrseq(struct mmc_host *host); void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card); #endif /* LINUX_MMC_CORE_H */ -- 2.11.0 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 1/4] mmc: pwrseq: add op reset to struct mmc_pwrseq_ops 2017-02-08 21:48 ` [PATCH 1/4] mmc: pwrseq: add op reset to struct mmc_pwrseq_ops Heiner Kallweit @ 2017-03-15 10:50 ` Ulf Hansson 2017-03-15 21:42 ` Heiner Kallweit 0 siblings, 1 reply; 9+ messages in thread From: Ulf Hansson @ 2017-03-15 10:50 UTC (permalink / raw) To: linus-amlogic On 8 February 2017 at 22:48, Heiner Kallweit <hkallweit1@gmail.com> wrote: > Add an operation reset to struct mmc_pwrseq_ops and related wrappers. > > Don't expose the pwrseq-internal reset function directly to kernel > users but just to the mmc core. > > Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> > --- > drivers/mmc/core/core.c | 6 ++++++ > drivers/mmc/core/pwrseq.c | 8 ++++++++ > drivers/mmc/core/pwrseq.h | 3 +++ > include/linux/mmc/core.h | 1 + > 4 files changed, 18 insertions(+) > > diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c > index 926e0fde..5d5fe591 100644 > --- a/drivers/mmc/core/core.c > +++ b/drivers/mmc/core/core.c > @@ -1869,6 +1869,12 @@ void mmc_power_cycle(struct mmc_host *host, u32 ocr) > mmc_power_up(host, ocr); > } > > +void mmc_hw_reset_pwrseq(struct mmc_host *host) > +{ > + mmc_pwrseq_reset(host); > +} > +EXPORT_SYMBOL(mmc_hw_reset_pwrseq); > + > /* > * Cleanup when the last reference to the bus operator is dropped. > */ > diff --git a/drivers/mmc/core/pwrseq.c b/drivers/mmc/core/pwrseq.c > index 9386c477..e3ad30fa 100644 > --- a/drivers/mmc/core/pwrseq.c > +++ b/drivers/mmc/core/pwrseq.c > @@ -76,6 +76,14 @@ void mmc_pwrseq_power_off(struct mmc_host *host) > pwrseq->ops->power_off(host); > } > > +void mmc_pwrseq_reset(struct mmc_host *host) > +{ > + struct mmc_pwrseq *pwrseq = host->pwrseq; > + > + if (pwrseq && pwrseq->ops->reset) > + pwrseq->ops->reset(host); > +} > + > void mmc_pwrseq_free(struct mmc_host *host) > { > struct mmc_pwrseq *pwrseq = host->pwrseq; > diff --git a/drivers/mmc/core/pwrseq.h b/drivers/mmc/core/pwrseq.h > index 39c911aa..819386f4 100644 > --- a/drivers/mmc/core/pwrseq.h > +++ b/drivers/mmc/core/pwrseq.h > @@ -18,6 +18,7 @@ struct mmc_pwrseq_ops { > void (*pre_power_on)(struct mmc_host *host); > void (*post_power_on)(struct mmc_host *host); > void (*power_off)(struct mmc_host *host); > + void (*reset)(struct mmc_host *host); > }; > > struct mmc_pwrseq { > @@ -36,6 +37,7 @@ int mmc_pwrseq_alloc(struct mmc_host *host); > void mmc_pwrseq_pre_power_on(struct mmc_host *host); > void mmc_pwrseq_post_power_on(struct mmc_host *host); > void mmc_pwrseq_power_off(struct mmc_host *host); > +void mmc_pwrseq_reset(struct mmc_host *host); > void mmc_pwrseq_free(struct mmc_host *host); > > #else > @@ -49,6 +51,7 @@ static inline int mmc_pwrseq_alloc(struct mmc_host *host) { return 0; } > static inline void mmc_pwrseq_pre_power_on(struct mmc_host *host) {} > static inline void mmc_pwrseq_post_power_on(struct mmc_host *host) {} > static inline void mmc_pwrseq_power_off(struct mmc_host *host) {} > +static inline void mmc_pwrseq_reset(struct mmc_host *host) {} > static inline void mmc_pwrseq_free(struct mmc_host *host) {} > > #endif > diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h > index a0c63ea2..8dbbd7a1 100644 > --- a/include/linux/mmc/core.h > +++ b/include/linux/mmc/core.h > @@ -166,6 +166,7 @@ int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd, > int retries); > > int mmc_hw_reset(struct mmc_host *host); > +void mmc_hw_reset_pwrseq(struct mmc_host *host); Don't you think we can make this transparent to mmc host drivers, instead of them having to assign their host_ops->hw_reset() callback to this new API? Because I guess that's the though!? In principle the mmc core already have all the information it needs, as to understand when the eMMC pwrseq should be invoked. Or perhaps the code may become a bit too messy for that? > void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card); > > #endif /* LINUX_MMC_CORE_H */ > -- > 2.11.0 > > Kind regards Uffe ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 1/4] mmc: pwrseq: add op reset to struct mmc_pwrseq_ops 2017-03-15 10:50 ` Ulf Hansson @ 2017-03-15 21:42 ` Heiner Kallweit 2017-03-16 6:49 ` Heiner Kallweit 2017-03-20 17:56 ` Ulf Hansson 0 siblings, 2 replies; 9+ messages in thread From: Heiner Kallweit @ 2017-03-15 21:42 UTC (permalink / raw) To: linus-amlogic Am 15.03.2017 um 11:50 schrieb Ulf Hansson: > On 8 February 2017 at 22:48, Heiner Kallweit <hkallweit1@gmail.com> wrote: >> Add an operation reset to struct mmc_pwrseq_ops and related wrappers. >> >> Don't expose the pwrseq-internal reset function directly to kernel >> users but just to the mmc core. >> >> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> >> --- >> drivers/mmc/core/core.c | 6 ++++++ >> drivers/mmc/core/pwrseq.c | 8 ++++++++ >> drivers/mmc/core/pwrseq.h | 3 +++ >> include/linux/mmc/core.h | 1 + >> 4 files changed, 18 insertions(+) >> >> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c >> index 926e0fde..5d5fe591 100644 >> --- a/drivers/mmc/core/core.c >> +++ b/drivers/mmc/core/core.c >> @@ -1869,6 +1869,12 @@ void mmc_power_cycle(struct mmc_host *host, u32 ocr) >> mmc_power_up(host, ocr); >> } >> >> +void mmc_hw_reset_pwrseq(struct mmc_host *host) >> +{ >> + mmc_pwrseq_reset(host); >> +} >> +EXPORT_SYMBOL(mmc_hw_reset_pwrseq); >> + >> /* >> * Cleanup when the last reference to the bus operator is dropped. >> */ >> diff --git a/drivers/mmc/core/pwrseq.c b/drivers/mmc/core/pwrseq.c >> index 9386c477..e3ad30fa 100644 >> --- a/drivers/mmc/core/pwrseq.c >> +++ b/drivers/mmc/core/pwrseq.c >> @@ -76,6 +76,14 @@ void mmc_pwrseq_power_off(struct mmc_host *host) >> pwrseq->ops->power_off(host); >> } >> >> +void mmc_pwrseq_reset(struct mmc_host *host) >> +{ >> + struct mmc_pwrseq *pwrseq = host->pwrseq; >> + >> + if (pwrseq && pwrseq->ops->reset) >> + pwrseq->ops->reset(host); >> +} >> + >> void mmc_pwrseq_free(struct mmc_host *host) >> { >> struct mmc_pwrseq *pwrseq = host->pwrseq; >> diff --git a/drivers/mmc/core/pwrseq.h b/drivers/mmc/core/pwrseq.h >> index 39c911aa..819386f4 100644 >> --- a/drivers/mmc/core/pwrseq.h >> +++ b/drivers/mmc/core/pwrseq.h >> @@ -18,6 +18,7 @@ struct mmc_pwrseq_ops { >> void (*pre_power_on)(struct mmc_host *host); >> void (*post_power_on)(struct mmc_host *host); >> void (*power_off)(struct mmc_host *host); >> + void (*reset)(struct mmc_host *host); >> }; >> >> struct mmc_pwrseq { >> @@ -36,6 +37,7 @@ int mmc_pwrseq_alloc(struct mmc_host *host); >> void mmc_pwrseq_pre_power_on(struct mmc_host *host); >> void mmc_pwrseq_post_power_on(struct mmc_host *host); >> void mmc_pwrseq_power_off(struct mmc_host *host); >> +void mmc_pwrseq_reset(struct mmc_host *host); >> void mmc_pwrseq_free(struct mmc_host *host); >> >> #else >> @@ -49,6 +51,7 @@ static inline int mmc_pwrseq_alloc(struct mmc_host *host) { return 0; } >> static inline void mmc_pwrseq_pre_power_on(struct mmc_host *host) {} >> static inline void mmc_pwrseq_post_power_on(struct mmc_host *host) {} >> static inline void mmc_pwrseq_power_off(struct mmc_host *host) {} >> +static inline void mmc_pwrseq_reset(struct mmc_host *host) {} >> static inline void mmc_pwrseq_free(struct mmc_host *host) {} >> >> #endif >> diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h >> index a0c63ea2..8dbbd7a1 100644 >> --- a/include/linux/mmc/core.h >> +++ b/include/linux/mmc/core.h >> @@ -166,6 +166,7 @@ int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd, >> int retries); >> >> int mmc_hw_reset(struct mmc_host *host); >> +void mmc_hw_reset_pwrseq(struct mmc_host *host); > > Don't you think we can make this transparent to mmc host drivers, > instead of them having to assign their host_ops->hw_reset() callback > to this new API? Because I guess that's the though!? > > In principle the mmc core already have all the information it needs, > as to understand when the eMMC pwrseq should be invoked. Or perhaps > the code may become a bit too messy for that? > The easiest way I could think of: If host->ops->hw_reset is NULL overwrite it with pwrseq->ops->reset in mmc_add_host. But host->ops is defined es being const, so the compiler won't allow us to do this. Of course we could do some casting but usually I try to avoid hacks like casting away const qualifiers. >> void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card); >> >> #endif /* LINUX_MMC_CORE_H */ >> -- >> 2.11.0 >> >> > > Kind regards > Uffe > ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 1/4] mmc: pwrseq: add op reset to struct mmc_pwrseq_ops 2017-03-15 21:42 ` Heiner Kallweit @ 2017-03-16 6:49 ` Heiner Kallweit 2017-03-20 18:02 ` Ulf Hansson 2017-03-20 17:56 ` Ulf Hansson 1 sibling, 1 reply; 9+ messages in thread From: Heiner Kallweit @ 2017-03-16 6:49 UTC (permalink / raw) To: linus-amlogic Am 15.03.2017 um 22:42 schrieb Heiner Kallweit: > Am 15.03.2017 um 11:50 schrieb Ulf Hansson: >> On 8 February 2017 at 22:48, Heiner Kallweit <hkallweit1@gmail.com> wrote: >>> Add an operation reset to struct mmc_pwrseq_ops and related wrappers. >>> >>> Don't expose the pwrseq-internal reset function directly to kernel >>> users but just to the mmc core. >>> >>> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> >>> --- >>> drivers/mmc/core/core.c | 6 ++++++ >>> drivers/mmc/core/pwrseq.c | 8 ++++++++ >>> drivers/mmc/core/pwrseq.h | 3 +++ >>> include/linux/mmc/core.h | 1 + >>> 4 files changed, 18 insertions(+) >>> >>> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c >>> index 926e0fde..5d5fe591 100644 >>> --- a/drivers/mmc/core/core.c >>> +++ b/drivers/mmc/core/core.c >>> @@ -1869,6 +1869,12 @@ void mmc_power_cycle(struct mmc_host *host, u32 ocr) >>> mmc_power_up(host, ocr); >>> } >>> >>> +void mmc_hw_reset_pwrseq(struct mmc_host *host) >>> +{ >>> + mmc_pwrseq_reset(host); >>> +} >>> +EXPORT_SYMBOL(mmc_hw_reset_pwrseq); >>> + >>> /* >>> * Cleanup when the last reference to the bus operator is dropped. >>> */ >>> diff --git a/drivers/mmc/core/pwrseq.c b/drivers/mmc/core/pwrseq.c >>> index 9386c477..e3ad30fa 100644 >>> --- a/drivers/mmc/core/pwrseq.c >>> +++ b/drivers/mmc/core/pwrseq.c >>> @@ -76,6 +76,14 @@ void mmc_pwrseq_power_off(struct mmc_host *host) >>> pwrseq->ops->power_off(host); >>> } >>> >>> +void mmc_pwrseq_reset(struct mmc_host *host) >>> +{ >>> + struct mmc_pwrseq *pwrseq = host->pwrseq; >>> + >>> + if (pwrseq && pwrseq->ops->reset) >>> + pwrseq->ops->reset(host); >>> +} >>> + >>> void mmc_pwrseq_free(struct mmc_host *host) >>> { >>> struct mmc_pwrseq *pwrseq = host->pwrseq; >>> diff --git a/drivers/mmc/core/pwrseq.h b/drivers/mmc/core/pwrseq.h >>> index 39c911aa..819386f4 100644 >>> --- a/drivers/mmc/core/pwrseq.h >>> +++ b/drivers/mmc/core/pwrseq.h >>> @@ -18,6 +18,7 @@ struct mmc_pwrseq_ops { >>> void (*pre_power_on)(struct mmc_host *host); >>> void (*post_power_on)(struct mmc_host *host); >>> void (*power_off)(struct mmc_host *host); >>> + void (*reset)(struct mmc_host *host); >>> }; >>> >>> struct mmc_pwrseq { >>> @@ -36,6 +37,7 @@ int mmc_pwrseq_alloc(struct mmc_host *host); >>> void mmc_pwrseq_pre_power_on(struct mmc_host *host); >>> void mmc_pwrseq_post_power_on(struct mmc_host *host); >>> void mmc_pwrseq_power_off(struct mmc_host *host); >>> +void mmc_pwrseq_reset(struct mmc_host *host); >>> void mmc_pwrseq_free(struct mmc_host *host); >>> >>> #else >>> @@ -49,6 +51,7 @@ static inline int mmc_pwrseq_alloc(struct mmc_host *host) { return 0; } >>> static inline void mmc_pwrseq_pre_power_on(struct mmc_host *host) {} >>> static inline void mmc_pwrseq_post_power_on(struct mmc_host *host) {} >>> static inline void mmc_pwrseq_power_off(struct mmc_host *host) {} >>> +static inline void mmc_pwrseq_reset(struct mmc_host *host) {} >>> static inline void mmc_pwrseq_free(struct mmc_host *host) {} >>> >>> #endif >>> diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h >>> index a0c63ea2..8dbbd7a1 100644 >>> --- a/include/linux/mmc/core.h >>> +++ b/include/linux/mmc/core.h >>> @@ -166,6 +166,7 @@ int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd, >>> int retries); >>> >>> int mmc_hw_reset(struct mmc_host *host); >>> +void mmc_hw_reset_pwrseq(struct mmc_host *host); >> >> Don't you think we can make this transparent to mmc host drivers, >> instead of them having to assign their host_ops->hw_reset() callback >> to this new API? Because I guess that's the though!? >> >> In principle the mmc core already have all the information it needs, >> as to understand when the eMMC pwrseq should be invoked. Or perhaps >> the code may become a bit too messy for that? >> > The easiest way I could think of: > If host->ops->hw_reset is NULL overwrite it with pwrseq->ops->reset > in mmc_add_host. But host->ops is defined es being const, so the compiler > won't allow us to do this. Of course we could do some casting but usually > I try to avoid hacks like casting away const qualifiers. > Other alternative: typedef void (*hw_reset_t)(struct mmc_host *host); hw_reset_t mmc_get_hw_reset(struct mmc_host *host) { struct mmc_pwrseq *p = host->pwrseq; if (host->ops->hw_reset) return host->ops->hw_reset; else if (p && p->ops->reset) return p->ops->reset; else return NULL; } And then use what mmc_get_hw_reset returns instead of using host->ops->hw_reset directly. How do you like this one? >>> void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card); >>> >>> #endif /* LINUX_MMC_CORE_H */ >>> -- >>> 2.11.0 >>> >>> >> >> Kind regards >> Uffe >> > ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 1/4] mmc: pwrseq: add op reset to struct mmc_pwrseq_ops 2017-03-16 6:49 ` Heiner Kallweit @ 2017-03-20 18:02 ` Ulf Hansson 0 siblings, 0 replies; 9+ messages in thread From: Ulf Hansson @ 2017-03-20 18:02 UTC (permalink / raw) To: linus-amlogic [...] >> > Other alternative: > > typedef void (*hw_reset_t)(struct mmc_host *host); > > hw_reset_t mmc_get_hw_reset(struct mmc_host *host) > { > struct mmc_pwrseq *p = host->pwrseq; > > if (host->ops->hw_reset) > return host->ops->hw_reset; > else if (p && p->ops->reset) > return p->ops->reset; > else > return NULL; > } > > And then use what mmc_get_hw_reset returns instead of using > host->ops->hw_reset directly. > > How do you like this one? Well, I would just rather do these checks and call the correct callback in mmc_reset(). There is no need to invent a function returning a function pointer when we call it directly instead. Additionally, I wonder whether it could make sense to allow both callbacks to co-exist and then call both. This would give the mmc host some options for doing some internal reset as well, while the pwrseq could handle the actual GPIO pin. What do you think? Kind regards Uffe > >>>> void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card); >>>> >>>> #endif /* LINUX_MMC_CORE_H */ >>>> -- >>>> 2.11.0 >>>> >>>> >>> >>> Kind regards >>> Uffe >>> >> > ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 1/4] mmc: pwrseq: add op reset to struct mmc_pwrseq_ops 2017-03-15 21:42 ` Heiner Kallweit 2017-03-16 6:49 ` Heiner Kallweit @ 2017-03-20 17:56 ` Ulf Hansson 1 sibling, 0 replies; 9+ messages in thread From: Ulf Hansson @ 2017-03-20 17:56 UTC (permalink / raw) To: linus-amlogic [...] >>> @@ -166,6 +166,7 @@ int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd, >>> int retries); >>> >>> int mmc_hw_reset(struct mmc_host *host); >>> +void mmc_hw_reset_pwrseq(struct mmc_host *host); >> >> Don't you think we can make this transparent to mmc host drivers, >> instead of them having to assign their host_ops->hw_reset() callback >> to this new API? Because I guess that's the though!? >> >> In principle the mmc core already have all the information it needs, >> as to understand when the eMMC pwrseq should be invoked. Or perhaps >> the code may become a bit too messy for that? >> > The easiest way I could think of: > If host->ops->hw_reset is NULL overwrite it with pwrseq->ops->reset > in mmc_add_host. But host->ops is defined es being const, so the compiler > won't allow us to do this. Of course we could do some casting but usually > I try to avoid hacks like casting away const qualifiers. No thanks. :-) [...] Kind regards Uffe ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 2/4] mmc: pwrseq: implement reset operation in pwrseq_emmc [not found] <75ad5eac-412b-fe73-ff53-3d8b975937e4@gmail.com> 2017-02-08 21:48 ` [PATCH 1/4] mmc: pwrseq: add op reset to struct mmc_pwrseq_ops Heiner Kallweit @ 2017-02-08 21:49 ` Heiner Kallweit 2017-02-08 21:49 ` [PATCH 3/4] mmc: meson-gx: add pwrseq-based hw_reset Heiner Kallweit 2017-02-08 21:49 ` [PATCH 4/4] ARM64: dts: meson-gxbb-odroidc2: add hw-reset capability flag for emmc port Heiner Kallweit 3 siblings, 0 replies; 9+ messages in thread From: Heiner Kallweit @ 2017-02-08 21:49 UTC (permalink / raw) To: linus-amlogic In pwrseq_emmc a reset function exists already and just needs to be exposed as reset hook. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> --- drivers/mmc/core/pwrseq_emmc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mmc/core/pwrseq_emmc.c b/drivers/mmc/core/pwrseq_emmc.c index adc9c0c6..a30e7352 100644 --- a/drivers/mmc/core/pwrseq_emmc.c +++ b/drivers/mmc/core/pwrseq_emmc.c @@ -57,6 +57,7 @@ static int mmc_pwrseq_emmc_reset_nb(struct notifier_block *this, static const struct mmc_pwrseq_ops mmc_pwrseq_emmc_ops = { .post_power_on = mmc_pwrseq_emmc_reset, + .reset = mmc_pwrseq_emmc_reset, }; static int mmc_pwrseq_emmc_probe(struct platform_device *pdev) -- 2.11.0 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 3/4] mmc: meson-gx: add pwrseq-based hw_reset [not found] <75ad5eac-412b-fe73-ff53-3d8b975937e4@gmail.com> 2017-02-08 21:48 ` [PATCH 1/4] mmc: pwrseq: add op reset to struct mmc_pwrseq_ops Heiner Kallweit 2017-02-08 21:49 ` [PATCH 2/4] mmc: pwrseq: implement reset operation in pwrseq_emmc Heiner Kallweit @ 2017-02-08 21:49 ` Heiner Kallweit 2017-02-08 21:49 ` [PATCH 4/4] ARM64: dts: meson-gxbb-odroidc2: add hw-reset capability flag for emmc port Heiner Kallweit 3 siblings, 0 replies; 9+ messages in thread From: Heiner Kallweit @ 2017-02-08 21:49 UTC (permalink / raw) To: linus-amlogic Use new function mmc_hw_reset_pwrseq as hw_reset operation. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> --- drivers/mmc/host/meson-gx-mmc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c index 5eca88bc..260a8ea8 100644 --- a/drivers/mmc/host/meson-gx-mmc.c +++ b/drivers/mmc/host/meson-gx-mmc.c @@ -716,6 +716,7 @@ static const struct mmc_host_ops meson_mmc_ops = { .request = meson_mmc_request, .set_ios = meson_mmc_set_ios, .get_cd = meson_mmc_get_cd, + .hw_reset = mmc_hw_reset_pwrseq, }; static int meson_mmc_probe(struct platform_device *pdev) -- 2.11.0 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 4/4] ARM64: dts: meson-gxbb-odroidc2: add hw-reset capability flag for emmc port [not found] <75ad5eac-412b-fe73-ff53-3d8b975937e4@gmail.com> ` (2 preceding siblings ...) 2017-02-08 21:49 ` [PATCH 3/4] mmc: meson-gx: add pwrseq-based hw_reset Heiner Kallweit @ 2017-02-08 21:49 ` Heiner Kallweit 3 siblings, 0 replies; 9+ messages in thread From: Heiner Kallweit @ 2017-02-08 21:49 UTC (permalink / raw) To: linus-amlogic Add hw-reset capability flag for emmc port. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> --- arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index c59403ad..2b68994a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -219,6 +219,7 @@ pinctrl-names = "default"; bus-width = <8>; + cap-mmc-hw-reset; cap-sd-highspeed; max-frequency = <200000000>; non-removable; -- 2.11.0 ^ permalink raw reply related [flat|nested] 9+ messages in thread
end of thread, other threads:[~2017-03-20 18:02 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <75ad5eac-412b-fe73-ff53-3d8b975937e4@gmail.com>
2017-02-08 21:48 ` [PATCH 1/4] mmc: pwrseq: add op reset to struct mmc_pwrseq_ops Heiner Kallweit
2017-03-15 10:50 ` Ulf Hansson
2017-03-15 21:42 ` Heiner Kallweit
2017-03-16 6:49 ` Heiner Kallweit
2017-03-20 18:02 ` Ulf Hansson
2017-03-20 17:56 ` Ulf Hansson
2017-02-08 21:49 ` [PATCH 2/4] mmc: pwrseq: implement reset operation in pwrseq_emmc Heiner Kallweit
2017-02-08 21:49 ` [PATCH 3/4] mmc: meson-gx: add pwrseq-based hw_reset Heiner Kallweit
2017-02-08 21:49 ` [PATCH 4/4] ARM64: dts: meson-gxbb-odroidc2: add hw-reset capability flag for emmc port Heiner Kallweit
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).