From: khilman@baylibre.com (Kevin Hilman)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 05/18] mmc: meson-gx: eliminate struct sd_emmc_data
Date: Wed, 15 Feb 2017 09:09:16 -0800 [thread overview]
Message-ID: <m2a89nbcub.fsf@baylibre.com> (raw)
In-Reply-To: <4a344def-d2de-ef25-8506-8ad92b8147ce@gmail.com> (Heiner Kallweit's message of "Tue, 14 Feb 2017 21:06:22 +0100")
Heiner Kallweit <hkallweit1@gmail.com> writes:
> Struct sd_emmc_data is used in meson_mmc_start_cmd only, so we can get
> rid of this struct and replace the two used members with local variables.
>
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
For the same reasons as the previous patch, I don't like this change as
I think it will be much cleaner code if we keep this descriptor struct
and use it to fill out multiple descriptors in a chain.
Kevin
> ---
> drivers/mmc/host/meson-gx-mmc.c | 69 +++++++++++++++++------------------------
> 1 file changed, 29 insertions(+), 40 deletions(-)
>
> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
> index 630e0590..c7bf0e12 100644
> --- a/drivers/mmc/host/meson-gx-mmc.c
> +++ b/drivers/mmc/host/meson-gx-mmc.c
> @@ -146,12 +146,6 @@ struct meson_host {
> bool vqmmc_enabled;
> };
>
> -struct sd_emmc_desc {
> - u32 cmd_cfg;
> - u32 cmd_arg;
> - u32 cmd_data;
> - u32 cmd_resp;
> -};
> #define CMD_CFG_LENGTH_SHIFT 0
> #define CMD_CFG_LENGTH_MASK 0x1ff
> #define CMD_CFG_BLOCK_MODE BIT(9)
> @@ -443,45 +437,41 @@ static int meson_mmc_request_done(struct mmc_host *mmc, struct mmc_request *mrq)
> static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
> {
> struct meson_host *host = mmc_priv(mmc);
> - struct sd_emmc_desc *desc, desc_tmp;
> - u32 cfg;
> + u32 cfg, cmd_cfg = 0, cmd_data = 0;
> u8 blk_len, cmd_cfg_timeout;
> unsigned int xfer_bytes = 0;
>
> /* Setup descriptors */
> dma_rmb();
> - desc = &desc_tmp;
> - memset(desc, 0, sizeof(struct sd_emmc_desc));
>
> - desc->cmd_cfg |= (cmd->opcode & CMD_CFG_CMD_INDEX_MASK) <<
> - CMD_CFG_CMD_INDEX_SHIFT;
> - desc->cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */
> + cmd_cfg |= (cmd->opcode & CMD_CFG_CMD_INDEX_MASK) <<
> + CMD_CFG_CMD_INDEX_SHIFT;
> + cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */
>
> /* Response */
> if (cmd->flags & MMC_RSP_PRESENT) {
> - desc->cmd_cfg &= ~CMD_CFG_NO_RESP;
> + cmd_cfg &= ~CMD_CFG_NO_RESP;
> if (cmd->flags & MMC_RSP_136)
> - desc->cmd_cfg |= CMD_CFG_RESP_128;
> - desc->cmd_cfg |= CMD_CFG_RESP_NUM;
> + cmd_cfg |= CMD_CFG_RESP_128;
> + cmd_cfg |= CMD_CFG_RESP_NUM;
> writel(0, host->regs + SD_EMMC_CMD_RSP);
>
> if (!(cmd->flags & MMC_RSP_CRC))
> - desc->cmd_cfg |= CMD_CFG_RESP_NOCRC;
> + cmd_cfg |= CMD_CFG_RESP_NOCRC;
>
> if (cmd->flags & MMC_RSP_BUSY)
> - desc->cmd_cfg |= CMD_CFG_R1B;
> + cmd_cfg |= CMD_CFG_R1B;
> } else {
> - desc->cmd_cfg |= CMD_CFG_NO_RESP;
> + cmd_cfg |= CMD_CFG_NO_RESP;
> }
>
> /* data? */
> if (cmd->data) {
> - desc->cmd_cfg |= CMD_CFG_DATA_IO;
> + cmd_cfg |= CMD_CFG_DATA_IO;
> if (cmd->data->blocks > 1) {
> - desc->cmd_cfg |= CMD_CFG_BLOCK_MODE;
> - desc->cmd_cfg |=
> - (cmd->data->blocks & CMD_CFG_LENGTH_MASK) <<
> - CMD_CFG_LENGTH_SHIFT;
> + cmd_cfg |= CMD_CFG_BLOCK_MODE;
> + cmd_cfg |= (cmd->data->blocks & CMD_CFG_LENGTH_MASK) <<
> + CMD_CFG_LENGTH_SHIFT;
>
> /* check if block-size matches, if not update */
> cfg = readl(host->regs + SD_EMMC_CFG);
> @@ -497,48 +487,47 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
> writel(cfg, host->regs + SD_EMMC_CFG);
> }
> } else {
> - desc->cmd_cfg &= ~CMD_CFG_BLOCK_MODE;
> - desc->cmd_cfg |=
> - (cmd->data->blksz & CMD_CFG_LENGTH_MASK) <<
> - CMD_CFG_LENGTH_SHIFT;
> + cmd_cfg &= ~CMD_CFG_BLOCK_MODE;
> + cmd_cfg |= (cmd->data->blksz & CMD_CFG_LENGTH_MASK) <<
> + CMD_CFG_LENGTH_SHIFT;
> }
>
> cmd->data->bytes_xfered = 0;
> xfer_bytes = cmd->data->blksz * cmd->data->blocks;
> if (cmd->data->flags & MMC_DATA_WRITE) {
> - desc->cmd_cfg |= CMD_CFG_DATA_WR;
> + cmd_cfg |= CMD_CFG_DATA_WR;
> WARN_ON(xfer_bytes > host->bounce_buf_size);
> sg_copy_to_buffer(cmd->data->sg, cmd->data->sg_len,
> host->bounce_buf, xfer_bytes);
> cmd->data->bytes_xfered = xfer_bytes;
> dma_wmb();
> } else {
> - desc->cmd_cfg &= ~CMD_CFG_DATA_WR;
> + cmd_cfg &= ~CMD_CFG_DATA_WR;
> }
>
> if (xfer_bytes > 0) {
> - desc->cmd_cfg &= ~CMD_CFG_DATA_NUM;
> - desc->cmd_data = host->bounce_dma_addr & CMD_DATA_MASK;
> + cmd_cfg &= ~CMD_CFG_DATA_NUM;
> + cmd_data = host->bounce_dma_addr & CMD_DATA_MASK;
> } else {
> /* write data to data_addr */
> - desc->cmd_cfg |= CMD_CFG_DATA_NUM;
> - desc->cmd_data = 0;
> + cmd_cfg |= CMD_CFG_DATA_NUM;
> + cmd_data = 0;
> }
>
> cmd_cfg_timeout = 12;
> } else {
> - desc->cmd_cfg &= ~CMD_CFG_DATA_IO;
> + cmd_cfg &= ~CMD_CFG_DATA_IO;
> cmd_cfg_timeout = 10;
> }
> - desc->cmd_cfg |= (cmd_cfg_timeout & CMD_CFG_TIMEOUT_MASK) <<
> - CMD_CFG_TIMEOUT_SHIFT;
> + cmd_cfg |= (cmd_cfg_timeout & CMD_CFG_TIMEOUT_MASK) <<
> + CMD_CFG_TIMEOUT_SHIFT;
>
> host->cmd = cmd;
>
> /* Last descriptor */
> - desc->cmd_cfg |= CMD_CFG_END_OF_CHAIN;
> - writel(desc->cmd_cfg, host->regs + SD_EMMC_CMD_CFG);
> - writel(desc->cmd_data, host->regs + SD_EMMC_CMD_DAT);
> + cmd_cfg |= CMD_CFG_END_OF_CHAIN;
> + writel(cmd_cfg, host->regs + SD_EMMC_CMD_CFG);
> + writel(cmd_data, host->regs + SD_EMMC_CMD_DAT);
> wmb(); /* ensure descriptor is written before kicked */
> writel(cmd->arg, host->regs + SD_EMMC_CMD_ARG);
> }
next prev parent reply other threads:[~2017-02-15 17:09 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <420b75a9-b8c2-b3d7-ae60-3ed8a5a18ead@gmail.com>
2017-02-14 20:05 ` [PATCH 01/18] mmc: meson-gx: set segment host parameters Heiner Kallweit
2017-02-14 20:05 ` [PATCH 02/18] mmc: meson-gx: remove code for unsupported CMD23 Heiner Kallweit
2017-02-15 16:54 ` Kevin Hilman
2017-02-16 7:03 ` Heiner Kallweit
2017-02-16 8:14 ` Ulf Hansson
2017-02-16 17:49 ` Heiner Kallweit
2017-02-19 19:36 ` Heiner Kallweit
2017-02-14 20:06 ` [PATCH 03/18] mmc: meson-gx: explicitely call stop command for multi-block commands only Heiner Kallweit
2017-02-14 20:06 ` [PATCH 04/18] mmc: meson-gx: improve meson_mmc_start_cmd Heiner Kallweit
2017-02-15 17:04 ` Kevin Hilman
2017-02-15 19:43 ` Heiner Kallweit
2017-02-15 21:10 ` Heiner Kallweit
2017-02-15 23:58 ` Kevin Hilman
2017-02-19 19:41 ` Heiner Kallweit
2017-02-14 20:06 ` [PATCH 05/18] mmc: meson-gx: eliminate struct sd_emmc_data Heiner Kallweit
2017-02-15 17:09 ` Kevin Hilman [this message]
2017-02-14 20:06 ` [PATCH 06/18] mmc: meson-gx: simplify bounce buffer setting in meson_mmc_start_cmd Heiner Kallweit
2017-02-15 17:14 ` Kevin Hilman
2017-02-14 20:06 ` [PATCH 07/18] mmc: meson-gx: check return value of sg_copy_[from,to]_buffer Heiner Kallweit
2017-02-15 17:17 ` [PATCH 07/18] mmc: meson-gx: check return value of sg_copy_[from, to]_buffer Kevin Hilman
2017-02-14 20:06 ` [PATCH 08/18] mmc: meson-gx: make two functions return void Heiner Kallweit
2017-02-15 17:18 ` Kevin Hilman
2017-02-14 20:06 ` [PATCH 09/18] mmc: meson-gx: change interrupt name Heiner Kallweit
2017-02-15 12:34 ` Ben Dooks
2017-02-15 19:46 ` Heiner Kallweit
2017-02-15 17:18 ` Kevin Hilman
2017-02-14 20:06 ` [PATCH 10/18] mmc: meson-gx: remove unused members irq, ocr_mask from struct meson_host Heiner Kallweit
2017-02-15 17:19 ` Kevin Hilman
2017-02-14 20:06 ` [PATCH 11/18] mmc: meson-gx: remove unneeded variable in meson_mmc_clk_init Heiner Kallweit
2017-02-15 19:24 ` Kevin Hilman
2017-02-14 20:06 ` [PATCH 12/18] mmc: meson-gx: remove member parent_mux from struct meson_host Heiner Kallweit
2017-02-15 19:25 ` Kevin Hilman
2017-02-14 20:06 ` [PATCH 13/18] mmc: meson-gx: remove unneeded meson_mmc_clk_set in meson_mmc_clk_init Heiner Kallweit
2017-02-15 19:27 ` Kevin Hilman
2017-02-15 19:38 ` Heiner Kallweit
2017-02-15 23:56 ` Kevin Hilman
2017-02-16 7:05 ` Heiner Kallweit
2017-02-14 20:07 ` [PATCH 14/18] mmc: meson-gx: remove unneeded devm_kstrdup " Heiner Kallweit
2017-02-15 19:30 ` Kevin Hilman
2017-02-15 19:35 ` Heiner Kallweit
2017-02-14 20:07 ` [PATCH 15/18] mmc: meson-gx: improve initial configuration Heiner Kallweit
2017-02-15 19:32 ` Kevin Hilman
2017-02-14 20:07 ` [PATCH 16/18] mmc: meson-gx: improve response reading and sending stop command Heiner Kallweit
2017-02-15 19:34 ` Kevin Hilman
2017-02-14 20:07 ` [PATCH 17/18] mmc: meson-gx: remove member mrq from struct meson_host Heiner Kallweit
2017-02-15 19:36 ` Kevin Hilman
2017-02-14 20:07 ` [PATCH 18/18] mmc: meson-gx: move handling of one case from threaded handler to main irq Heiner Kallweit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m2a89nbcub.fsf@baylibre.com \
--to=khilman@baylibre.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).