linux-api.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jarkko Sakkinen <jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
To: Peter Huewe <peterhuewe-Mmb7MZpHnFY@public.gmane.org>,
	Ashley Lai <ashley-fm2HMyfA2y6tG0bUXCXiUA@public.gmane.org>,
	Marcel Selhorst <tpmdd-yWjUBOtONefk1uMJSBkQmQ@public.gmane.org>
Cc: tpmdd-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-api-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Will Arthur
	<will.c.arthur-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
	Jarkko Sakkinen
	<jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Subject: [PATCH v2 7/7] tpm: TPM 2.0 FIFO Interface
Date: Tue,  7 Oct 2014 20:01:17 +0300	[thread overview]
Message-ID: <1412701277-27794-8-git-send-email-jarkko.sakkinen@linux.intel.com> (raw)
In-Reply-To: <1412701277-27794-1-git-send-email-jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>

From: Will Arthur <will.c.arthur-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>

Detect TPM 2.0 by using the extended STS (STS3) register. For TPM 2.0,
instead of calling tpm_get_timeouts(), assign duration and timeout
values defined in the TPM 2.0 PTP specification.

Signed-off-by: Will Arthur <will.c.arthur-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
 drivers/char/tpm/tpm_tis.c | 77 ++++++++++++++++++++++++++++++++++++----------
 1 file changed, 60 insertions(+), 17 deletions(-)

diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index df04ce6..5c5a0cc 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (C) 2005, 2006 IBM Corporation
+ * Copyright (C) 2014 Intel Corporation
  *
  * Authors:
  * Leendert van Doorn <leendert-aZOuKsOsJu3MbYB6QlFGEg@public.gmane.org>
@@ -44,6 +45,10 @@ enum tis_status {
 	TPM_STS_DATA_EXPECT = 0x08,
 };
 
+enum tis_status3 {
+	TPM_STS3_TPM2_FAM = 0x04,
+};
+
 enum tis_int_flags {
 	TPM_GLOBAL_INT_ENABLE = 0x80000000,
 	TPM_INTF_BURST_COUNT_STATIC = 0x100,
@@ -70,6 +75,7 @@ enum tis_defaults {
 #define	TPM_INT_STATUS(l)		(0x0010 | ((l) << 12))
 #define	TPM_INTF_CAPS(l)		(0x0014 | ((l) << 12))
 #define	TPM_STS(l)			(0x0018 | ((l) << 12))
+#define	TPM_STS3(l)			(0x001b | ((l) << 12))
 #define	TPM_DATA_FIFO(l)		(0x0024 | ((l) << 12))
 
 #define	TPM_DID_VID(l)			(0x0F00 | ((l) << 12))
@@ -344,6 +350,7 @@ static int tpm_tis_send(struct tpm_chip *chip, u8 *buf, size_t len)
 {
 	int rc;
 	u32 ordinal;
+	unsigned long dur;
 
 	rc = tpm_tis_send_data(chip, buf, len);
 	if (rc < 0)
@@ -355,9 +362,14 @@ static int tpm_tis_send(struct tpm_chip *chip, u8 *buf, size_t len)
 
 	if (chip->vendor.irq) {
 		ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
+
+		if (chip->flags & TPM_CHIP_FLAG_TPM2)
+			dur = tpm_calc_ordinal_duration(chip, ordinal);
+		else
+			dur = tpm_calc_ordinal_duration(chip, ordinal);
+
 		if (wait_for_tpm_stat
-		    (chip, TPM_STS_DATA_AVAIL | TPM_STS_VALID,
-		     tpm_calc_ordinal_duration(chip, ordinal),
+		    (chip, TPM_STS_DATA_AVAIL | TPM_STS_VALID, dur,
 		     &chip->vendor.read_queue, false) < 0) {
 			rc = -ETIME;
 			goto out_err;
@@ -531,24 +543,43 @@ static int tpm_tis_init(struct device *dev, resource_size_t start,
 	u32 vendor, intfcaps, intmask;
 	int rc, i, irq_s, irq_e, probe;
 	struct tpm_chip *chip;
+	u8 sts3;
+	u32 dummy;
 
 	chip = tpm_chip_alloc(dev, &tpm_tis);
-	if (!chip)
+	if (IS_ERR(chip))
 		return -ENODEV;
 
 	chip->vendor.iobase = devm_ioremap(dev, start, len);
 	if (!chip->vendor.iobase)
 		return -EIO;
 
+	sts3 = ioread8(chip->vendor.iobase + TPM_STS3(1));
+	if (sts3 & TPM_STS3_TPM2_FAM)
+		chip->flags = TPM_CHIP_FLAG_TPM2;
+
 	rc = tpm_chip_register(chip);
 	if (rc)
 		return -ENODEV;
 
-	/* Default timeouts */
-	chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
-	chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT);
-	chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
-	chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+        /* Default timeouts */
+        if (chip->flags & TPM_CHIP_FLAG_TPM2) {
+                chip->vendor.timeout_a = usecs_to_jiffies(TPM2_TIMEOUT_A);
+                chip->vendor.timeout_b = usecs_to_jiffies(TPM2_TIMEOUT_B);
+                chip->vendor.timeout_c = usecs_to_jiffies(TPM2_TIMEOUT_C);
+                chip->vendor.timeout_d = usecs_to_jiffies(TPM2_TIMEOUT_D);
+                chip->vendor.duration[TPM_SHORT] =
+                        usecs_to_jiffies(TPM2_DURATION_SHORT);
+                chip->vendor.duration[TPM_MEDIUM] =
+                        usecs_to_jiffies(TPM2_DURATION_MEDIUM);
+                chip->vendor.duration[TPM_LONG] =
+                        usecs_to_jiffies(TPM2_DURATION_LONG);
+        } else {
+                chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+                chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT);
+                chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+                chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+        }
 
 	if (wait_startup(chip, 0) != 0) {
 		rc = -ENODEV;
@@ -563,9 +594,9 @@ static int tpm_tis_init(struct device *dev, resource_size_t start,
 	vendor = ioread32(chip->vendor.iobase + TPM_DID_VID(0));
 	chip->vendor.manufacturer_id = vendor;
 
-	dev_info(dev,
-		 "1.2 TPM (device-id 0x%X, rev-id %d)\n",
-		 vendor >> 16, ioread8(chip->vendor.iobase + TPM_RID(0)));
+        dev_info(dev, "%s TPM (device-id 0x%X, rev-id %d)\n",
+                 (chip->flags & TPM_CHIP_FLAG_TPM2) ? "2.0" : "1.2",
+                 vendor >> 16, ioread8(chip->vendor.iobase + TPM_RID(0)));
 
 	if (!itpm) {
 		probe = probe_itpm(chip);
@@ -612,7 +643,11 @@ static int tpm_tis_init(struct device *dev, resource_size_t start,
 		goto out_err;
 	}
 
-	if (tpm_do_selftest(chip)) {
+	if (chip->flags & TPM_CHIP_FLAG_TPM2)
+		rc = tpm2_do_selftest(chip);
+	else
+		rc = tpm_do_selftest(chip);
+	if (rc) {
 		dev_err(dev, "TPM self test failed\n");
 		rc = -ENODEV;
 		goto out_err;
@@ -673,7 +708,11 @@ static int tpm_tis_init(struct device *dev, resource_size_t start,
 			chip->vendor.probed_irq = 0;
 
 			/* Generate Interrupts */
-			tpm_gen_interrupt(chip);
+			if (chip->flags & TPM_CHIP_FLAG_TPM2)
+				rc = tpm2_get_tpm_pt(chip, TPM2_CAP_TPM_PROPERTIES, &dummy,
+						     "attempting to generate an interrupt");
+			else
+				tpm_gen_interrupt(chip);
 
 			chip->vendor.irq = chip->vendor.probed_irq;
 
@@ -752,14 +791,18 @@ static void tpm_tis_reenable_interrupts(struct tpm_chip *chip)
 static int tpm_tis_resume(struct device *dev)
 {
 	struct tpm_chip *chip = dev_get_drvdata(dev);
-	int ret;
+	int ret = 0;
 
 	if (chip->vendor.irq)
 		tpm_tis_reenable_interrupts(chip);
 
-	ret = tpm_pm_resume(dev);
-	if (!ret)
-		tpm_do_selftest(chip);
+	if (chip->flags & TPM_CHIP_FLAG_TPM2)
+		tpm2_do_selftest(chip);
+	else {
+		ret = tpm_pm_resume(dev);
+		if (!ret)
+			tpm_do_selftest(chip);
+	}
 
 	return ret;
 }
-- 
2.1.0

  parent reply	other threads:[~2014-10-07 17:01 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-07 17:01 [PATCH v2 0/7] TPM 2.0 support Jarkko Sakkinen
2014-10-07 17:01 ` [PATCH v2 1/7] tpm: merge duplicate transmit_cmd() functions Jarkko Sakkinen
     [not found] ` <1412701277-27794-1-git-send-email-jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2014-10-07 17:01   ` [PATCH v2 2/7] tpm: two-phase chip management functions Jarkko Sakkinen
2014-10-07 17:50     ` [tpmdd-devel] " Jason Gunthorpe
     [not found]       ` <20141007175017.GA10432-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2014-10-07 18:04         ` Jarkko Sakkinen
     [not found]           ` <20141007180417.GA29459-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2014-10-07 18:27             ` Jason Gunthorpe
     [not found]               ` <20141007182756.GA10774-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2014-10-07 19:15                 ` Jarkko Sakkinen
2014-10-07 22:28         ` Jarkko Sakkinen
     [not found]           ` <20141007222814.GA7262-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2014-10-07 22:34             ` Jason Gunthorpe
     [not found]               ` <20141007223442.GA3014-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2014-10-09  9:07                 ` Jarkko Sakkinen
2014-10-07 17:01   ` Jarkko Sakkinen [this message]
2014-10-07 17:01 ` [PATCH v2 3/7] tpm: clean up tpm_tis driver life-cycle Jarkko Sakkinen
     [not found]   ` <1412701277-27794-4-git-send-email-jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2014-10-07 17:53     ` [tpmdd-devel] " Jason Gunthorpe
2014-10-07 17:01 ` [PATCH v2 4/7] tpm: TPM 2.0 commands Jarkko Sakkinen
2014-10-07 17:01 ` [PATCH v2 5/7] tpm: TPM 2.0 sysfs attributes Jarkko Sakkinen
2014-10-07 17:01 ` [PATCH v2 6/7] tpm: TPM 2.0 CRB Interface Jarkko Sakkinen
     [not found]   ` <1412701277-27794-7-git-send-email-jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2014-10-07 17:54     ` [tpmdd-devel] " Jason Gunthorpe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1412701277-27794-8-git-send-email-jarkko.sakkinen@linux.intel.com \
    --to=jarkko.sakkinen-vuqaysv1563yd54fqh9/ca@public.gmane.org \
    --cc=ashley-fm2HMyfA2y6tG0bUXCXiUA@public.gmane.org \
    --cc=linux-api-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=peterhuewe-Mmb7MZpHnFY@public.gmane.org \
    --cc=tpmdd-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
    --cc=tpmdd-yWjUBOtONefk1uMJSBkQmQ@public.gmane.org \
    --cc=will.c.arthur-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).