From: Li Xi <pkuelelixi-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: linux-fsdevel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-ext4-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-api-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
tytso-3s7WtUTddSA@public.gmane.org,
adilger-m1MBpc4rdrD3fQ9qLvQP4Q@public.gmane.org,
jack-AlSwsSmVLrQ@public.gmane.org,
viro-RmSDqhL/yNMiFSDQTTA3OLVCufUGDwFn@public.gmane.org,
hch-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org,
dmonakhov-GEFAQzZX7r8dnm+yROfE0A@public.gmane.org
Subject: [v8 5/5] ext4: cleanup inode flag definitions
Date: Tue, 9 Dec 2014 13:22:28 +0800 [thread overview]
Message-ID: <1418102548-5469-6-git-send-email-lixi@ddn.com> (raw)
In-Reply-To: <1418102548-5469-1-git-send-email-lixi-LfVdkaOWEx8@public.gmane.org>
The inode flags defined in uapi/linux/fs.h were migrated from
ext4.h. This patch changes the inode flag definitions in ext4.h
to VFS definitions to make the gaps between them clearer.
Signed-off-by: Li Xi <lixi-LfVdkaOWEx8@public.gmane.org>
---
fs/ext4/ext4.h | 50 +++++++++++++++++++++++++-------------------------
1 files changed, 25 insertions(+), 25 deletions(-)
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 43a2a88..bcc04c0 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -353,33 +353,33 @@ struct flex_groups {
/*
* Inode flags
*/
-#define EXT4_SECRM_FL 0x00000001 /* Secure deletion */
-#define EXT4_UNRM_FL 0x00000002 /* Undelete */
-#define EXT4_COMPR_FL 0x00000004 /* Compress file */
-#define EXT4_SYNC_FL 0x00000008 /* Synchronous updates */
-#define EXT4_IMMUTABLE_FL 0x00000010 /* Immutable file */
-#define EXT4_APPEND_FL 0x00000020 /* writes to file may only append */
-#define EXT4_NODUMP_FL 0x00000040 /* do not dump file */
-#define EXT4_NOATIME_FL 0x00000080 /* do not update atime */
+#define EXT4_SECRM_FL FS_SECRM_FL /* Secure deletion */
+#define EXT4_UNRM_FL FS_UNRM_FL /* Undelete */
+#define EXT4_COMPR_FL FS_COMPR_FL /* Compress file */
+#define EXT4_SYNC_FL FS_SYNC_FL /* Synchronous updates */
+#define EXT4_IMMUTABLE_FL FS_IMMUTABLE_FL /* Immutable file */
+#define EXT4_APPEND_FL FS_APPEND_FL /* writes to file may only append */
+#define EXT4_NODUMP_FL FS_NODUMP_FL /* do not dump file */
+#define EXT4_NOATIME_FL FS_NOATIME_FL /* do not update atime */
/* Reserved for compression usage... */
-#define EXT4_DIRTY_FL 0x00000100
-#define EXT4_COMPRBLK_FL 0x00000200 /* One or more compressed clusters */
-#define EXT4_NOCOMPR_FL 0x00000400 /* Don't compress */
-#define EXT4_ECOMPR_FL 0x00000800 /* Compression error */
+#define EXT4_DIRTY_FL FS_DIRTY_FL
+#define EXT4_COMPRBLK_FL FS_COMPRBLK_FL /* One or more compressed clusters */
+#define EXT4_NOCOMPR_FL FS_NOCOMP_FL /* Don't compress */
+#define EXT4_ECOMPR_FL FS_ECOMPR_FL /* Compression error */
/* End compression flags --- maybe not all used */
-#define EXT4_INDEX_FL 0x00001000 /* hash-indexed directory */
-#define EXT4_IMAGIC_FL 0x00002000 /* AFS directory */
-#define EXT4_JOURNAL_DATA_FL 0x00004000 /* file data should be journaled */
-#define EXT4_NOTAIL_FL 0x00008000 /* file tail should not be merged */
-#define EXT4_DIRSYNC_FL 0x00010000 /* dirsync behaviour (directories only) */
-#define EXT4_TOPDIR_FL 0x00020000 /* Top of directory hierarchies*/
-#define EXT4_HUGE_FILE_FL 0x00040000 /* Set to each huge file */
-#define EXT4_EXTENTS_FL 0x00080000 /* Inode uses extents */
-#define EXT4_EA_INODE_FL 0x00200000 /* Inode used for large EA */
-#define EXT4_EOFBLOCKS_FL 0x00400000 /* Blocks allocated beyond EOF */
-#define EXT4_INLINE_DATA_FL 0x10000000 /* Inode has inline data. */
-#define EXT4_PROJINHERIT_FL FS_PROJINHERIT_FL /* Create with parents projid */
-#define EXT4_RESERVED_FL 0x80000000 /* reserved for ext4 lib */
+#define EXT4_INDEX_FL FS_INDEX_FL /* hash-indexed directory */
+#define EXT4_IMAGIC_FL FS_IMAGIC_FL /* AFS directory */
+#define EXT4_JOURNAL_DATA_FL FS_JOURNAL_DATA_FL /* file data should be journaled */
+#define EXT4_NOTAIL_FL FS_NOTAIL_FL /* file tail should not be merged */
+#define EXT4_DIRSYNC_FL FS_DIRSYNC_FL /* dirsync behaviour (directories only) */
+#define EXT4_TOPDIR_FL FS_TOPDIR_FL /* Top of directory hierarchies*/
+#define EXT4_HUGE_FILE_FL 0x00040000 /* Set to each huge file */
+#define EXT4_EXTENTS_FL FS_EXTENT_FL /* Inode uses extents */
+#define EXT4_EA_INODE_FL 0x00200000 /* Inode used for large EA */
+#define EXT4_EOFBLOCKS_FL 0x00400000 /* Blocks allocated beyond EOF */
+#define EXT4_INLINE_DATA_FL 0x10000000 /* Inode has inline data. */
+#define EXT4_PROJINHERIT_FL FS_PROJINHERIT_FL /* Create with parents projid */
+#define EXT4_RESERVED_FL FS_RESERVED_FL /* reserved for ext4 lib */
#define EXT4_FL_USER_VISIBLE 0x204BDFFF /* User visible flags */
#define EXT4_FL_USER_MODIFIABLE 0x204380FF /* User modifiable flags */
--
1.7.1
next prev parent reply other threads:[~2014-12-09 5:22 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-09 5:22 [v8 0/5] ext4: add project quota support Li Xi
2014-12-09 5:22 ` [v8 1/5] vfs: adds general codes to enforces project quota limits Li Xi
2014-12-09 5:22 ` [v8 2/5] ext4: adds project ID support Li Xi
2015-01-07 23:11 ` Andreas Dilger
2015-01-08 8:51 ` Jan Kara
2015-01-15 7:52 ` Li Xi
[not found] ` <1418102548-5469-3-git-send-email-lixi-LfVdkaOWEx8@public.gmane.org>
2015-01-08 8:26 ` Jan Kara
2015-01-08 22:20 ` Andreas Dilger
2015-01-09 9:47 ` Jan Kara
[not found] ` <20150109094758.GA2576-+0h/O2h83AeN3ZZ/Hiejyg@public.gmane.org>
2015-01-09 23:46 ` Dave Chinner
2015-01-12 17:01 ` Jan Kara
2014-12-09 5:22 ` [v8 3/5] ext4: adds project quota support Li Xi
2015-01-06 20:01 ` Andreas Dilger
2015-01-06 21:52 ` Jan Kara
2014-12-09 5:22 ` [v8 4/5] ext4: adds FS_IOC_FSSETXATTR/FS_IOC_FSGETXATTR interface support Li Xi
2014-12-09 22:57 ` Dave Chinner
2015-01-22 15:20 ` Konstantin Khlebnikov
2015-01-22 15:59 ` Jan Kara
2015-01-22 18:35 ` Konstantin Khlebnikov
[not found] ` <20150122155900.GB3062-+0h/O2h83AeN3ZZ/Hiejyg@public.gmane.org>
2015-01-23 1:39 ` Dave Chinner
2015-01-22 15:28 ` Konstantin Khlebnikov
[not found] ` <54C11733.7080801-XoJtRXgx1JseBXzfvpsJ4g@public.gmane.org>
2015-01-23 1:53 ` Dave Chinner
2015-01-23 11:58 ` Konstantin Khlebnikov
2015-01-23 23:30 ` Dave Chinner
2015-01-23 23:59 ` Andy Lutomirski
[not found] ` <CALCETrXPCrOTrkoAMuW2os=z6anaEfv4F4D2yDxo6VtCuEtRZw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-01-27 8:02 ` Dave Chinner
2015-01-27 10:45 ` Konstantin Khlebnikov
2015-01-28 0:37 ` Dave Chinner
2015-02-04 15:22 ` Konstantin Khlebnikov
[not found] ` <20150204225844.GA12722@dastard>
2015-02-05 9:32 ` Konstantin Khlebnikov
2015-02-05 16:38 ` Jan Kara
2015-02-05 21:05 ` Dave Chinner
2015-01-28 0:45 ` Andy Lutomirski
[not found] ` <1418102548-5469-1-git-send-email-lixi-LfVdkaOWEx8@public.gmane.org>
2014-12-09 5:22 ` Li Xi [this message]
[not found] ` <1418102548-5469-6-git-send-email-lixi-LfVdkaOWEx8@public.gmane.org>
2015-01-06 20:05 ` [v8 5/5] ext4: cleanup inode flag definitions Andreas Dilger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1418102548-5469-6-git-send-email-lixi@ddn.com \
--to=pkuelelixi-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=adilger-m1MBpc4rdrD3fQ9qLvQP4Q@public.gmane.org \
--cc=dmonakhov-GEFAQzZX7r8dnm+yROfE0A@public.gmane.org \
--cc=hch-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org \
--cc=jack-AlSwsSmVLrQ@public.gmane.org \
--cc=linux-api-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-ext4-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-fsdevel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=tytso-3s7WtUTddSA@public.gmane.org \
--cc=viro-RmSDqhL/yNMiFSDQTTA3OLVCufUGDwFn@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).