From: Michael Ellerman <mpe@ellerman.id.au>
To: linux-kernel@vger.kernel.org
Cc: mmarek@suse.cz, gregkh@linuxfoundation.org,
akpm@linux-foundation.org, rostedt@goodmis.org, mingo@redhat.com,
davem@davemloft.net, keescook@chromium.org,
tranmanphong@gmail.com, cov@codeaurora.org,
dh.herrmann@gmail.com, hughd@google.com, bobby.prani@gmail.com,
serge.hallyn@ubuntu.com, ebiederm@xmission.com,
tim.bird@sonymobile.com, josh@joshtriplett.org, koct9i@gmail.com,
linux-kbuild@vger.kernel.org, linux-api@vger.kernel.org,
netdev@vger.kernel.org, shuahkh@osg.samsung.com
Subject: [PATCH 3/6] selftests: Add install support for the powerpc tests
Date: Fri, 9 Jan 2015 20:06:12 +1100 [thread overview]
Message-ID: <1420794375-31881-3-git-send-email-mpe@ellerman.id.au> (raw)
In-Reply-To: <1420794375-31881-1-git-send-email-mpe@ellerman.id.au>
The bulk of the selftests are actually below the powerpc sub directory.
This adds support for installing them, when on a powerpc machine, or if
ARCH and CROSS_COMPILE are set appropriately.
This is a little more complicated because of the sub directory structure
under powerpc, but much of the common logic in lib.mk is still used. The
net effect of the patch is still a reduction in code.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
tools/testing/selftests/powerpc/Makefile | 19 ++++++++-
tools/testing/selftests/powerpc/copyloops/Makefile | 15 +++----
tools/testing/selftests/powerpc/mm/Makefile | 15 +++----
tools/testing/selftests/powerpc/pmu/Makefile | 48 ++++++++++++----------
tools/testing/selftests/powerpc/pmu/ebb/Makefile | 13 +++---
.../testing/selftests/powerpc/primitives/Makefile | 15 +++----
tools/testing/selftests/powerpc/tm/Makefile | 15 +++----
7 files changed, 68 insertions(+), 72 deletions(-)
diff --git a/tools/testing/selftests/powerpc/Makefile b/tools/testing/selftests/powerpc/Makefile
index f6ff90a76bd7..d2d19db7eda7 100644
--- a/tools/testing/selftests/powerpc/Makefile
+++ b/tools/testing/selftests/powerpc/Makefile
@@ -22,10 +22,25 @@ all: $(TARGETS)
$(TARGETS):
$(MAKE) -k -C $@ all
-run_tests: all
+include ../lib.mk
+
+override define RUN_TESTS
@for TARGET in $(TARGETS); do \
$(MAKE) -C $$TARGET run_tests; \
done;
+endef
+
+override define INSTALL_RULE
+ @for TARGET in $(TARGETS); do \
+ $(MAKE) -C $$TARGET install; \
+ done;
+endef
+
+override define EMIT_TESTS
+ @for TARGET in $(TARGETS); do \
+ $(MAKE) -s -C $$TARGET emit_tests; \
+ done;
+endef
clean:
@for TARGET in $(TARGETS); do \
@@ -36,4 +51,4 @@ clean:
tags:
find . -name '*.c' -o -name '*.h' | xargs ctags
-.PHONY: all run_tests clean tags $(TARGETS)
+.PHONY: tags $(TARGETS)
diff --git a/tools/testing/selftests/powerpc/copyloops/Makefile b/tools/testing/selftests/powerpc/copyloops/Makefile
index 6f2d3be227f9..c05023514ce8 100644
--- a/tools/testing/selftests/powerpc/copyloops/Makefile
+++ b/tools/testing/selftests/powerpc/copyloops/Makefile
@@ -6,24 +6,19 @@ CFLAGS += -D SELFTEST
# Use our CFLAGS for the implicit .S rule
ASFLAGS = $(CFLAGS)
-PROGS := copyuser_64 copyuser_power7 memcpy_64 memcpy_power7
+TEST_PROGS := copyuser_64 copyuser_power7 memcpy_64 memcpy_power7
EXTRA_SOURCES := validate.c ../harness.c
-all: $(PROGS)
+all: $(TEST_PROGS)
copyuser_64: CPPFLAGS += -D COPY_LOOP=test___copy_tofrom_user_base
copyuser_power7: CPPFLAGS += -D COPY_LOOP=test___copy_tofrom_user_power7
memcpy_64: CPPFLAGS += -D COPY_LOOP=test_memcpy
memcpy_power7: CPPFLAGS += -D COPY_LOOP=test_memcpy_power7
-$(PROGS): $(EXTRA_SOURCES)
+$(TEST_PROGS): $(EXTRA_SOURCES)
-run_tests: all
- @-for PROG in $(PROGS); do \
- ./$$PROG; \
- done;
+include ../../lib.mk
clean:
- rm -f $(PROGS) *.o
-
-.PHONY: all run_tests clean
+ rm -f $(TEST_PROGS) *.o
diff --git a/tools/testing/selftests/powerpc/mm/Makefile b/tools/testing/selftests/powerpc/mm/Makefile
index 357ccbd6bad9..e3b5fa360520 100644
--- a/tools/testing/selftests/powerpc/mm/Makefile
+++ b/tools/testing/selftests/powerpc/mm/Makefile
@@ -1,18 +1,13 @@
noarg:
$(MAKE) -C ../
-PROGS := hugetlb_vs_thp_test
+TEST_PROGS := hugetlb_vs_thp_test
-all: $(PROGS)
+all: $(TEST_PROGS)
-$(PROGS): ../harness.c
+$(TEST_PROGS): ../harness.c
-run_tests: all
- @-for PROG in $(PROGS); do \
- ./$$PROG; \
- done;
+include ../../lib.mk
clean:
- rm -f $(PROGS)
-
-.PHONY: all run_tests clean
+ rm -f $(TEST_PROGS)
diff --git a/tools/testing/selftests/powerpc/pmu/Makefile b/tools/testing/selftests/powerpc/pmu/Makefile
index c9f4263906a5..5a161175bbd4 100644
--- a/tools/testing/selftests/powerpc/pmu/Makefile
+++ b/tools/testing/selftests/powerpc/pmu/Makefile
@@ -1,38 +1,42 @@
noarg:
$(MAKE) -C ../
-PROGS := count_instructions l3_bank_test per_event_excludes
+TEST_PROGS := count_instructions l3_bank_test per_event_excludes
EXTRA_SOURCES := ../harness.c event.c lib.c
-SUB_TARGETS = ebb
+all: $(TEST_PROGS) ebb
-all: $(PROGS) $(SUB_TARGETS)
-
-$(PROGS): $(EXTRA_SOURCES)
+$(TEST_PROGS): $(EXTRA_SOURCES)
# loop.S can only be built 64-bit
count_instructions: loop.S count_instructions.c $(EXTRA_SOURCES)
$(CC) $(CFLAGS) -m64 -o $@ $^
-run_tests: all sub_run_tests
- @-for PROG in $(PROGS); do \
- ./$$PROG; \
- done;
+include ../../lib.mk
-clean: sub_clean
- rm -f $(PROGS) loop.o
+DEFAULT_RUN_TESTS := $(RUN_TESTS)
+override define RUN_TESTS
+ $(DEFAULT_RUN_TESTS)
+ $(MAKE) -C ebb run_tests
+endef
-$(SUB_TARGETS):
- $(MAKE) -k -C $@ all
+DEFAULT_EMIT_TESTS := $(EMIT_TESTS)
+override define EMIT_TESTS
+ $(DEFAULT_EMIT_TESTS)
+ $(MAKE) -s -C ebb emit_tests
+endef
-sub_run_tests: all
- @for TARGET in $(SUB_TARGETS); do \
- $(MAKE) -C $$TARGET run_tests; \
- done;
+DEFAULT_INSTALL := $(INSTALL_RULE)
+override define INSTALL_RULE
+ $(DEFAULT_INSTALL_RULE)
+ $(MAKE) -C ebb install
+endef
-sub_clean:
- @for TARGET in $(SUB_TARGETS); do \
- $(MAKE) -C $$TARGET clean; \
- done;
+clean:
+ rm -f $(TEST_PROGS) loop.o
+ $(MAKE) -C ebb clean
+
+ebb:
+ $(MAKE) -k -C $@ all
-.PHONY: all run_tests clean sub_run_tests sub_clean $(SUB_TARGETS)
+.PHONY: all run_tests clean ebb
diff --git a/tools/testing/selftests/powerpc/pmu/ebb/Makefile b/tools/testing/selftests/powerpc/pmu/ebb/Makefile
index 3dc4332698cb..5cdc9dbf2b27 100644
--- a/tools/testing/selftests/powerpc/pmu/ebb/Makefile
+++ b/tools/testing/selftests/powerpc/pmu/ebb/Makefile
@@ -4,7 +4,7 @@ noarg:
# The EBB handler is 64-bit code and everything links against it
CFLAGS += -m64
-PROGS := reg_access_test event_attributes_test cycles_test \
+TEST_PROGS := reg_access_test event_attributes_test cycles_test \
cycles_with_freeze_test pmc56_overflow_test \
ebb_vs_cpu_event_test cpu_event_vs_ebb_test \
cpu_event_pinned_vs_ebb_test task_event_vs_ebb_test \
@@ -16,18 +16,15 @@ PROGS := reg_access_test event_attributes_test cycles_test \
lost_exception_test no_handler_test \
cycles_with_mmcr2_test
-all: $(PROGS)
+all: $(TEST_PROGS)
-$(PROGS): ../../harness.c ../event.c ../lib.c ebb.c ebb_handler.S trace.c busy_loop.S
+$(TEST_PROGS): ../../harness.c ../event.c ../lib.c ebb.c ebb_handler.S trace.c busy_loop.S
instruction_count_test: ../loop.S
lost_exception_test: ../lib.c
-run_tests: all
- @-for PROG in $(PROGS); do \
- ./$$PROG; \
- done;
+include ../../../lib.mk
clean:
- rm -f $(PROGS)
+ rm -f $(TEST_PROGS)
diff --git a/tools/testing/selftests/powerpc/primitives/Makefile b/tools/testing/selftests/powerpc/primitives/Makefile
index ea737ca01732..b68c6221d3d1 100644
--- a/tools/testing/selftests/powerpc/primitives/Makefile
+++ b/tools/testing/selftests/powerpc/primitives/Makefile
@@ -1,17 +1,12 @@
CFLAGS += -I$(CURDIR)
-PROGS := load_unaligned_zeropad
+TEST_PROGS := load_unaligned_zeropad
-all: $(PROGS)
+all: $(TEST_PROGS)
-$(PROGS): ../harness.c
+$(TEST_PROGS): ../harness.c
-run_tests: all
- @-for PROG in $(PROGS); do \
- ./$$PROG; \
- done;
+include ../../lib.mk
clean:
- rm -f $(PROGS) *.o
-
-.PHONY: all run_tests clean
+ rm -f $(TEST_PROGS) *.o
diff --git a/tools/testing/selftests/powerpc/tm/Makefile b/tools/testing/selftests/powerpc/tm/Makefile
index 2cede239a074..34f2ec634b40 100644
--- a/tools/testing/selftests/powerpc/tm/Makefile
+++ b/tools/testing/selftests/powerpc/tm/Makefile
@@ -1,15 +1,10 @@
-PROGS := tm-resched-dscr
+TEST_PROGS := tm-resched-dscr
-all: $(PROGS)
+all: $(TEST_PROGS)
-$(PROGS): ../harness.c
+$(TEST_PROGS): ../harness.c
-run_tests: all
- @-for PROG in $(PROGS); do \
- ./$$PROG; \
- done;
+include ../../lib.mk
clean:
- rm -f $(PROGS) *.o
-
-.PHONY: all run_tests clean
+ rm -f $(TEST_PROGS) *.o
--
2.1.0
next prev parent reply other threads:[~2015-01-09 9:06 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-09 9:06 [PATCH 1/6] selftests: Introduce minimal shared logic for running tests Michael Ellerman
2015-01-09 9:06 ` [PATCH 2/6] selftests: Add install target Michael Ellerman
2015-01-16 17:46 ` Shuah Khan
2015-01-19 0:35 ` Michael Ellerman
[not found] ` <1421627752.3787.8.camel-Gsx/Oe8HsFggBc27wqDAHg@public.gmane.org>
2015-01-19 16:35 ` Shuah Khan
2015-01-20 3:13 ` Michael Ellerman
2015-01-09 9:06 ` Michael Ellerman [this message]
[not found] ` <1420794375-31881-1-git-send-email-mpe-Gsx/Oe8HsFggBc27wqDAHg@public.gmane.org>
2015-01-09 9:06 ` [PATCH 4/6] kbuild: add a new kselftest_install make target to install selftests Michael Ellerman
2015-01-16 16:34 ` Shuah Khan
2015-01-19 0:35 ` Michael Ellerman
2015-01-19 16:34 ` Shuah Khan
2015-01-16 17:53 ` [PATCH 1/6] selftests: Introduce minimal shared logic for running tests Shuah Khan
2015-01-19 0:35 ` Michael Ellerman
2015-01-19 16:39 ` Shuah Khan
2015-01-20 3:08 ` Michael Ellerman
2015-01-09 9:06 ` [PATCH 5/6] kbuild: Don't pass -rR to selftest makefiles Michael Ellerman
2015-01-09 9:06 ` [PATCH 6/6] selftests: Set CC using CROSS_COMPILE once in lib.mk Michael Ellerman
2015-01-16 16:37 ` Shuah Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1420794375-31881-3-git-send-email-mpe@ellerman.id.au \
--to=mpe@ellerman.id.au \
--cc=akpm@linux-foundation.org \
--cc=bobby.prani@gmail.com \
--cc=cov@codeaurora.org \
--cc=davem@davemloft.net \
--cc=dh.herrmann@gmail.com \
--cc=ebiederm@xmission.com \
--cc=gregkh@linuxfoundation.org \
--cc=hughd@google.com \
--cc=josh@joshtriplett.org \
--cc=keescook@chromium.org \
--cc=koct9i@gmail.com \
--cc=linux-api@vger.kernel.org \
--cc=linux-kbuild@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=mmarek@suse.cz \
--cc=netdev@vger.kernel.org \
--cc=rostedt@goodmis.org \
--cc=serge.hallyn@ubuntu.com \
--cc=shuahkh@osg.samsung.com \
--cc=tim.bird@sonymobile.com \
--cc=tranmanphong@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).