From mboxrd@z Thu Jan 1 00:00:00 1970 From: Boris Brezillon Subject: [PATCH v5 23/50] mtd: nand: bf5xx: switch to mtd_ooblayout_ops Date: Wed, 30 Mar 2016 18:14:38 +0200 Message-ID: <1459354505-32551-24-git-send-email-boris.brezillon@free-electrons.com> References: <1459354505-32551-1-git-send-email-boris.brezillon@free-electrons.com> Reply-To: boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Return-path: Sender: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org In-Reply-To: <1459354505-32551-1-git-send-email-boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , To: David Woodhouse , Brian Norris , linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Boris Brezillon , Richard Weinberger Cc: Daniel Mack , Haojian Zhuang , Robert Jarzmik , Kukjin Kim , Krzysztof Kozlowski , linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Ralf Baechle , linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org, Nicolas Ferre , Jean-Christophe Plagniol-Villard , Alexandre Belloni , Wenyou Yang , Josh Wu , Ezequiel Garcia , Maxime Ripard , Chen-Yu Tsai , linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org, Stefan Agner , Kyungmin Park , Greg Kroah-Hartman , devel-gWbeCf7V1WCQmaza687I9mD2FQJk+8+b@public.gmane.org List-Id: linux-api@vger.kernel.org Implementing the mtd_ooblayout_ops interface is the new way of exposing ECC/OOB layout to MTD users. Signed-off-by: Boris Brezillon --- drivers/mtd/nand/bf5xx_nand.c | 51 ++++++++++++++++++++++++------------------- 1 file changed, 28 insertions(+), 23 deletions(-) diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c index 7f6b30e..b38f414 100644 --- a/drivers/mtd/nand/bf5xx_nand.c +++ b/drivers/mtd/nand/bf5xx_nand.c @@ -109,28 +109,33 @@ static const unsigned short bfin_nfc_pin_req[] = 0}; #ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC -static struct nand_ecclayout bootrom_ecclayout = { - .eccbytes = 24, - .eccpos = { - 0x8 * 0, 0x8 * 0 + 1, 0x8 * 0 + 2, - 0x8 * 1, 0x8 * 1 + 1, 0x8 * 1 + 2, - 0x8 * 2, 0x8 * 2 + 1, 0x8 * 2 + 2, - 0x8 * 3, 0x8 * 3 + 1, 0x8 * 3 + 2, - 0x8 * 4, 0x8 * 4 + 1, 0x8 * 4 + 2, - 0x8 * 5, 0x8 * 5 + 1, 0x8 * 5 + 2, - 0x8 * 6, 0x8 * 6 + 1, 0x8 * 6 + 2, - 0x8 * 7, 0x8 * 7 + 1, 0x8 * 7 + 2 - }, - .oobfree = { - { 0x8 * 0 + 3, 5 }, - { 0x8 * 1 + 3, 5 }, - { 0x8 * 2 + 3, 5 }, - { 0x8 * 3 + 3, 5 }, - { 0x8 * 4 + 3, 5 }, - { 0x8 * 5 + 3, 5 }, - { 0x8 * 6 + 3, 5 }, - { 0x8 * 7 + 3, 5 }, - } +static int bootrom_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section > 7) + return -ERANGE; + + oobregion->offset = section * 8; + oobregion->length = 3; + + return 0; +} + +static int bootrom_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section > 7) + return -ERANGE; + + oobregion->offset = (section * 8) + 3; + oobregion->length = 5; + + return 0; +} + +static const struct mtd_ooblayout_ops bootrom_ooblayout_ops = { + .ecc = bootrom_ooblayout_ecc, + .free = bootrom_ooblayout_free, }; #endif @@ -800,7 +805,7 @@ static int bf5xx_nand_probe(struct platform_device *pdev) /* setup hardware ECC data struct */ if (hardware_ecc) { #ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC - chip->ecc.layout = &bootrom_ecclayout; + mtd_set_ooblayout(mtd, &bootrom_ooblayout_ops); #endif chip->read_buf = bf5xx_nand_dma_read_buf; chip->write_buf = bf5xx_nand_dma_write_buf; -- 2.5.0