From: Jarkko Sakkinen <jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
To: Scot Doyle <lkml14-enLWO88E2pdl57MIdRCFDg@public.gmane.org>
Cc: Peter Huewe <peterhuewe-Mmb7MZpHnFY@public.gmane.org>,
Ashley Lai <ashley-fm2HMyfA2y6tG0bUXCXiUA@public.gmane.org>,
Marcel Selhorst <tpmdd-yWjUBOtONefk1uMJSBkQmQ@public.gmane.org>,
christophe.ricard-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
josh.triplett-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
linux-api-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Will Arthur
<will.c.arthur-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
tpmdd-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
jason.gunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org,
trousers-tech-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: Re: [tpmdd-devel] [PATCH v9 8/8] tpm: TPM 2.0 FIFO Interface
Date: Fri, 5 Dec 2014 15:05:33 +0200 [thread overview]
Message-ID: <20141205130533.GA6993@intel.com> (raw)
In-Reply-To: <alpine.DEB.2.11.1412041459470.5705-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
On Thu, Dec 04, 2014 at 03:25:12PM +0000, Scot Doyle wrote:
> Hi Jarkko,
>
> On Thu, 4 Dec 2014, Jarkko Sakkinen wrote:
> > From: Will Arthur <will.c.arthur-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
> >
> > Detect TPM 2.0 by using the extended STS (STS3) register. For TPM 2.0,
> > instead of calling tpm_get_timeouts(), assign duration and timeout
> > values defined in the TPM 2.0 PTP specification.
> >
> > Signed-off-by: Will Arthur <will.c.arthur-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
> > Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
> > ---
> > drivers/char/tpm/tpm_tis.c | 80 ++++++++++++++++++++++++++++++++++++++--------
> > 1 file changed, 67 insertions(+), 13 deletions(-)
> >
> > diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
> > index 89e1abb..71cbb2d 100644
> > --- a/drivers/char/tpm/tpm_tis.c
> > +++ b/drivers/char/tpm/tpm_tis.c
> > @@ -1,5 +1,6 @@
> > /*
> > * Copyright (C) 2005, 2006 IBM Corporation
> > + * Copyright (C) 2014 Intel Corporation
> > *
> > * Authors:
> > * Leendert van Doorn <leendert-aZOuKsOsJu3MbYB6QlFGEg@public.gmane.org>
> > @@ -44,6 +45,10 @@ enum tis_status {
> > TPM_STS_DATA_EXPECT = 0x08,
> > };
> >
> > +enum tis_status3 {
> > + TPM_STS3_TPM2_FAM = 0x04,
> > +};
> > +
> > enum tis_int_flags {
> > TPM_GLOBAL_INT_ENABLE = 0x80000000,
> > TPM_INTF_BURST_COUNT_STATIC = 0x100,
> > @@ -70,6 +75,7 @@ enum tis_defaults {
> > #define TPM_INT_STATUS(l) (0x0010 | ((l) << 12))
> > #define TPM_INTF_CAPS(l) (0x0014 | ((l) << 12))
> > #define TPM_STS(l) (0x0018 | ((l) << 12))
> > +#define TPM_STS3(l) (0x001b | ((l) << 12))
> > #define TPM_DATA_FIFO(l) (0x0024 | ((l) << 12))
> >
> > #define TPM_DID_VID(l) (0x0F00 | ((l) << 12))
> > @@ -363,6 +369,7 @@ static int tpm_tis_send_main(struct tpm_chip *chip, u8 *buf, size_t len)
> > {
> > int rc;
> > u32 ordinal;
> > + unsigned long dur;
> >
> > rc = tpm_tis_send_data(chip, buf, len);
> > if (rc < 0)
> > @@ -374,9 +381,14 @@ static int tpm_tis_send_main(struct tpm_chip *chip, u8 *buf, size_t len)
> >
> > if (chip->vendor.irq) {
> > ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
> > +
> > + if (chip->flags & TPM_CHIP_FLAG_TPM2)
> > + dur = tpm2_calc_ordinal_duration(chip, ordinal);
> > + else
> > + dur = tpm_calc_ordinal_duration(chip, ordinal);
> > +
> > if (wait_for_tpm_stat
> > - (chip, TPM_STS_DATA_AVAIL | TPM_STS_VALID,
> > - tpm_calc_ordinal_duration(chip, ordinal),
> > + (chip, TPM_STS_DATA_AVAIL | TPM_STS_VALID, dur,
> > &chip->vendor.read_queue, false) < 0) {
> > rc = -ETIME;
> > goto out_err;
> > @@ -588,6 +600,7 @@ static int tpm_tis_init(struct device *dev, acpi_handle acpi_dev_handle,
> > int rc, i, irq_s, irq_e, probe;
> > struct tpm_chip *chip;
> > struct priv_data *priv;
> > + u8 sts3;
> >
> > priv = devm_kzalloc(dev, sizeof(struct priv_data), GFP_KERNEL);
> > if (priv == NULL)
> > @@ -604,11 +617,28 @@ static int tpm_tis_init(struct device *dev, acpi_handle acpi_dev_handle,
> > if (!chip->vendor.iobase)
> > return -EIO;
> >
> > + sts3 = ioread8(chip->vendor.iobase + TPM_STS3(1));
> > + if ((sts3 & TPM_STS3_TPM2_FAM) == TPM_STS3_TPM2_FAM)
> > + chip->flags = TPM_CHIP_FLAG_TPM2;
> > +
> > /* Default timeouts */
> > - chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
> > - chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT);
> > - chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
> > - chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
> > + if (chip->flags & TPM_CHIP_FLAG_TPM2) {
> > + chip->vendor.timeout_a = usecs_to_jiffies(TPM2_TIMEOUT_A);
> > + chip->vendor.timeout_b = usecs_to_jiffies(TPM2_TIMEOUT_B);
> > + chip->vendor.timeout_c = usecs_to_jiffies(TPM2_TIMEOUT_C);
> > + chip->vendor.timeout_d = usecs_to_jiffies(TPM2_TIMEOUT_D);
> > + chip->vendor.duration[TPM_SHORT] =
> > + usecs_to_jiffies(TPM2_DURATION_SHORT);
> > + chip->vendor.duration[TPM_MEDIUM] =
> > + usecs_to_jiffies(TPM2_DURATION_MEDIUM);
> > + chip->vendor.duration[TPM_LONG] =
> > + usecs_to_jiffies(TPM2_DURATION_LONG);
> > + } else {
> > + chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
> > + chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT);
> > + chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
> > + chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
> > + }
> >
> > if (wait_startup(chip, 0) != 0) {
> > rc = -ENODEV;
> > @@ -623,8 +653,8 @@ static int tpm_tis_init(struct device *dev, acpi_handle acpi_dev_handle,
> > vendor = ioread32(chip->vendor.iobase + TPM_DID_VID(0));
> > chip->vendor.manufacturer_id = vendor;
> >
> > - dev_info(dev,
> > - "1.2 TPM (device-id 0x%X, rev-id %d)\n",
> > + dev_info(dev, "%s TPM (device-id 0x%X, rev-id %d)\n",
> > + (chip->flags & TPM_CHIP_FLAG_TPM2) ? "2.0" : "1.2",
> > vendor >> 16, ioread8(chip->vendor.iobase + TPM_RID(0)));
> >
> > if (!itpm) {
> > @@ -665,6 +695,23 @@ static int tpm_tis_init(struct device *dev, acpi_handle acpi_dev_handle,
> > if (intfcaps & TPM_INTF_DATA_AVAIL_INT)
> > dev_dbg(dev, "\tData Avail Int Support\n");
> >
> > + /* get the timeouts before testing for irqs */
> > + if (!(chip->flags & TPM_CHIP_FLAG_TPM2) && tpm_get_timeouts(chip)) {
> > + dev_err(dev, "Could not get TPM timeouts and durations\n");
> > + rc = -ENODEV;
> > + goto out_err;
> > + }
> > +
> > + if (chip->flags & TPM_CHIP_FLAG_TPM2)
> > + rc = tpm2_do_selftest(chip);
> > + else
> > + rc = tpm_do_selftest(chip);
> > + if (rc) {
> > + dev_err(dev, "TPM self test failed\n");
> > + rc = -ENODEV;
> > + goto out_err;
> > + }
> > +
> > /* INTERRUPT Setup */
> > init_waitqueue_head(&chip->vendor.read_queue);
> > init_waitqueue_head(&chip->vendor.int_queue);
>
> In Peter's for-james branch, commit 0e6cb01, the v1.2 calls to
> tpm_get_timeouts and tpm_do_selftest were moved toward the end of
> tpm_tis_init.
Right. My bad. Could this be reverted with a separate fix or do
I prepare a new patch set? I would propose the former...
> > @@ -720,7 +767,10 @@ static int tpm_tis_init(struct device *dev, acpi_handle acpi_dev_handle,
> > chip->vendor.probed_irq = 0;
> >
> > /* Generate Interrupts */
> > - tpm_gen_interrupt(chip);
> > + if (chip->flags & TPM_CHIP_FLAG_TPM2)
> > + tpm2_gen_interrupt(chip);
> > + else
> > + tpm_gen_interrupt(chip);
> >
> > chip->vendor.irq = chip->vendor.probed_irq;
> >
> > @@ -808,14 +858,18 @@ static void tpm_tis_reenable_interrupts(struct tpm_chip *chip)
> > static int tpm_tis_resume(struct device *dev)
> > {
> > struct tpm_chip *chip = dev_get_drvdata(dev);
> > - int ret;
> > + int ret = 0;
> >
> > if (chip->vendor.irq)
> > tpm_tis_reenable_interrupts(chip);
> >
> > - ret = tpm_pm_resume(dev);
> > - if (!ret)
> > - tpm_do_selftest(chip);
> > + if (chip->flags & TPM_CHIP_FLAG_TPM2)
> > + tpm2_do_selftest(chip);
> > + else {
> > + ret = tpm_pm_resume(dev);
> > + if (!ret)
> > + tpm_do_selftest(chip);
> > + }
> >
> > return ret;
> > }
> > --
> > 2.1.0
> >
/Jarkko
next prev parent reply other threads:[~2014-12-05 13:05 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-04 5:55 [PATCH v9 0/8] TPM 2.0 support Jarkko Sakkinen
2014-12-04 5:55 ` [PATCH v9 1/8] tpm: merge duplicate transmit_cmd() functions Jarkko Sakkinen
2014-12-04 5:55 ` [PATCH v9 2/8] tpm: two-phase chip management functions Jarkko Sakkinen
2014-12-04 5:55 ` [PATCH v9 3/8] tpm: fix raciness of PPI interface lookup Jarkko Sakkinen
[not found] ` <1417672518-4530-4-git-send-email-jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2014-12-04 20:34 ` Peter Hüwe
[not found] ` <1417672518-4530-1-git-send-email-jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2014-12-04 5:55 ` [PATCH v9 4/8] tpm: rename chip->dev to chip->pdev Jarkko Sakkinen
[not found] ` <1417672518-4530-5-git-send-email-jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2014-12-04 20:49 ` Peter Hüwe
2014-12-04 5:55 ` [PATCH v9 5/8] tpm: device class for tpm Jarkko Sakkinen
2014-12-04 5:55 ` [PATCH v9 6/8] tpm: TPM 2.0 baseline support Jarkko Sakkinen
[not found] ` <1417672518-4530-7-git-send-email-jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2014-12-04 23:17 ` Peter Hüwe
[not found] ` <201412050017.40668.PeterHuewe-Mmb7MZpHnFY@public.gmane.org>
2014-12-05 14:13 ` Jarkko Sakkinen
[not found] ` <20141205141303.GF6993-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2014-12-05 14:35 ` Aw: " Peter Huewe
2014-12-06 11:54 ` Jarkko Sakkinen
2014-12-04 5:55 ` [PATCH v9 7/8] tpm: TPM 2.0 CRB Interface Jarkko Sakkinen
2014-12-04 20:19 ` Peter Hüwe
[not found] ` <201412042119.21493.PeterHuewe-Mmb7MZpHnFY@public.gmane.org>
2014-12-05 13:10 ` Jarkko Sakkinen
[not found] ` <1417672518-4530-8-git-send-email-jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2014-12-04 22:55 ` Peter Hüwe
2014-12-04 5:55 ` [PATCH v9 8/8] tpm: TPM 2.0 FIFO Interface Jarkko Sakkinen
2014-12-04 21:46 ` Peter Hüwe
[not found] ` <201412042246.25662.PeterHuewe-Mmb7MZpHnFY@public.gmane.org>
2014-12-05 13:06 ` Jarkko Sakkinen
[not found] ` <1417672518-4530-9-git-send-email-jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2014-12-04 15:25 ` [tpmdd-devel] " Scot Doyle
[not found] ` <alpine.DEB.2.11.1412041459470.5705-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2014-12-05 13:05 ` Jarkko Sakkinen [this message]
2014-12-04 22:18 ` Peter Hüwe
[not found] ` <201412042318.33889.PeterHuewe-Mmb7MZpHnFY@public.gmane.org>
2014-12-04 22:28 ` [tpmdd-devel] " Peter Hüwe
[not found] ` <201412042328.29578.PeterHuewe-Mmb7MZpHnFY@public.gmane.org>
2014-12-05 15:01 ` Aw: " Peter Huewe
2014-12-05 20:44 ` Stefan Berger
2014-12-09 15:47 ` Jarkko Sakkinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141205130533.GA6993@intel.com \
--to=jarkko.sakkinen-vuqaysv1563yd54fqh9/ca@public.gmane.org \
--cc=ashley-fm2HMyfA2y6tG0bUXCXiUA@public.gmane.org \
--cc=christophe.ricard-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=jason.gunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org \
--cc=josh.triplett-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=linux-api-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=lkml14-enLWO88E2pdl57MIdRCFDg@public.gmane.org \
--cc=peterhuewe-Mmb7MZpHnFY@public.gmane.org \
--cc=tpmdd-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=tpmdd-yWjUBOtONefk1uMJSBkQmQ@public.gmane.org \
--cc=trousers-tech-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=will.c.arthur-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).