From: Eric Auger <eric.auger-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: Baptiste Reynal
<b.reynal-lrHrjnjw1UfHK3s98zE1ajGjJy/sRE9J@public.gmane.org>,
kvmarm-FPEHb7Xf0XXUo1n7N8X6UoWGPAHP3yOg@public.gmane.org,
iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org,
alex.williamson-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Cc: ABI/API <linux-api-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
tech-lrHrjnjw1UfHK3s98zE1ajGjJy/sRE9J@public.gmane.org,
open list <linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
christoffer.dall-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
VFIO DRIVER <kvm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: Re: [RFC PATCH v3 1/3] vfio: platform: add device properties skeleton and user API
Date: Thu, 03 Sep 2015 18:48:56 +0200 [thread overview]
Message-ID: <55E879F8.7000008@linaro.org> (raw)
In-Reply-To: <1419024032-1269-2-git-send-email-a.motakis-lrHrjnjw1UfHK3s98zE1ajGjJy/sRE9J@public.gmane.org>
On 12/19/2014 10:20 PM, Antonios Motakis wrote:
> This patch introduced the API to return device properties about
This patch introduces an API that allows to return device node
properties of a device bound to the vfio-platform/vfio-amba driver?
> a PLATFORM device (if described by a device tree or ACPI) and the
> skeleton of the implementation for VFIO_PLATFORM. Information about any
> device node bound by VFIO_PLATFORM should be queried via the introduced
> ioctl VFIO_DEVICE_GET_DEV_PROPERTY.
>
> The user needs to know the name and the data type of the property he is
> accessing.
>
> Signed-off-by: Antonios Motakis <a.motakis-lrHrjnjw1UfHK3s98zE1ajGjJy/sRE9J@public.gmane.org>
> ---
> drivers/vfio/platform/Makefile | 3 +-
> drivers/vfio/platform/properties.c | 61 +++++++++++++++++++++++++++
> drivers/vfio/platform/vfio_platform_common.c | 35 +++++++++++++++
> drivers/vfio/platform/vfio_platform_private.h | 7 +++
> include/uapi/linux/vfio.h | 26 ++++++++++++
> 5 files changed, 131 insertions(+), 1 deletion(-)
> create mode 100644 drivers/vfio/platform/properties.c
>
> diff --git a/drivers/vfio/platform/Makefile b/drivers/vfio/platform/Makefile
> index 81de144..99f3ba1 100644
> --- a/drivers/vfio/platform/Makefile
> +++ b/drivers/vfio/platform/Makefile
> @@ -1,5 +1,6 @@
>
> -vfio-platform-y := vfio_platform.o vfio_platform_common.o vfio_platform_irq.o
> +vfio-platform-y := vfio_platform.o vfio_platform_common.o vfio_platform_irq.o \
> + devtree.o
devtree.o or properties.o?
>
> obj-$(CONFIG_VFIO_PLATFORM) += vfio-platform.o
>
> diff --git a/drivers/vfio/platform/properties.c b/drivers/vfio/platform/properties.c
> new file mode 100644
> index 0000000..8b90465
> --- /dev/null
> +++ b/drivers/vfio/platform/properties.c
missing copyright
> @@ -0,0 +1,61 @@
> +#include <linux/slab.h>
> +#include <linux/vfio.h>
> +#include <linux/property.h>
> +#include "vfio_platform_private.h"
> +
> +static int dev_property_get_strings(struct device *dev,
> + char *name, unsigned *lenp,
> + void __user *datap, unsigned long datasz)
> +{
> + return -EINVAL;
> +}
> +
> +static int dev_property_get_uint(struct device *dev, char *name,
> + uint32_t type, unsigned *lenp,
> + void __user *datap, unsigned long datasz)
> +{
> + return -EINVAL;
> +}
> +
> +int vfio_platform_dev_properties(struct device *dev,
> + uint32_t type, unsigned *lenp,
> + void __user *datap, unsigned long datasz)
> +{
> + char *name;
> + long namesz;
> + int ret;
> +
> + namesz = strnlen_user(datap, datasz);
> + if (!namesz)
> + return -EFAULT;
> + if (namesz > datasz)
> + return -EINVAL;
> +
> + name = kzalloc(namesz, GFP_KERNEL);
> + if (!name)
> + return -ENOMEM;
> + if (strncpy_from_user(name, datap, namesz) <= 0) {
> + kfree(name);
> + return -EFAULT;
> + }
> +
> + switch (type) {
> + case VFIO_DEV_PROPERTY_TYPE_STRINGS:
> + ret = dev_property_get_strings(dev, name, lenp, datap, datasz);
> + break;
> +
> + case VFIO_DEV_PROPERTY_TYPE_U64:
> + case VFIO_DEV_PROPERTY_TYPE_U32:
> + case VFIO_DEV_PROPERTY_TYPE_U16:
> + case VFIO_DEV_PROPERTY_TYPE_U8:
> + ret = dev_property_get_uint(dev, name, type, lenp,
> + datap, datasz);
> + break;
> +
> + default:
> + ret = -EINVAL;
> + }
> +
> + kfree(name);
> + return ret;
> +}
> diff --git a/drivers/vfio/platform/vfio_platform_common.c b/drivers/vfio/platform/vfio_platform_common.c
> index a532a25..83ad4b74 100644
> --- a/drivers/vfio/platform/vfio_platform_common.c
> +++ b/drivers/vfio/platform/vfio_platform_common.c
> @@ -19,6 +19,7 @@
> #include <linux/slab.h>
> #include <linux/types.h>
> #include <linux/vfio.h>
> +#include <linux/property.h>
>
> #include "vfio_platform_private.h"
>
> @@ -251,6 +252,34 @@ static long vfio_platform_ioctl(void *device_data,
>
> return ret;
>
> + } else if (cmd == VFIO_DEVICE_GET_DEV_PROPERTY) {
> + struct vfio_dev_property info;
> + void __user *datap;
> + unsigned long datasz;
> + int ret;
> +
> + if (!vdev->dev)
> + return -EINVAL;
> +
> + minsz = offsetofend(struct vfio_dev_property, length);
> +
> + if (copy_from_user(&info, (void __user *)arg, minsz))
> + return -EFAULT;
> +
> + if (info.argsz < minsz)
> + return -EINVAL;
> +
> + datap = (void __user *) arg + minsz;
> + datasz = info.argsz - minsz;
> +
> + ret = vfio_platform_dev_properties(vdev->dev, info.type,
> + &info.length, datap, datasz);
> +
> + if (copy_to_user((void __user *)arg, &info, minsz))
> + ret = -EFAULT;
> +
> + return ret;
> +
> } else if (cmd == VFIO_DEVICE_RESET)
> return -EINVAL;
>
> @@ -501,6 +530,12 @@ int vfio_platform_probe_common(struct vfio_platform_device *vdev,
> return ret;
> }
>
> + /* add device properties flag */
> + if (device_property_present(dev, "name")) {
> + vdev->dev = dev;
> + vdev->flags |= VFIO_DEVICE_FLAGS_DEV_PROPERTIES;
> + }
> +
> mutex_init(&vdev->igate);
>
> return 0;
> diff --git a/drivers/vfio/platform/vfio_platform_private.h b/drivers/vfio/platform/vfio_platform_private.h
> index c3d5b4b..fc6b1fb 100644
> --- a/drivers/vfio/platform/vfio_platform_private.h
> +++ b/drivers/vfio/platform/vfio_platform_private.h
> @@ -53,6 +53,7 @@ struct vfio_platform_device {
> u32 num_irqs;
> int refcnt;
> struct mutex igate;
> + struct device *dev;
>
> /*
> * These fields should be filled by the bus specific binder
> @@ -79,4 +80,10 @@ extern int vfio_platform_set_irqs_ioctl(struct vfio_platform_device *vdev,
> unsigned start, unsigned count,
> void *data);
>
> +/* device properties support in devtree.c */
devtree.c to be removed
> +extern int vfio_platform_dev_properties(struct device *dev,
> + uint32_t type, unsigned *lenp,
> + void __user *datap,
> + unsigned long datasz);
> +
> #endif /* VFIO_PLATFORM_PRIVATE_H */
> diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
> index 544d3d8..ac50ab3f 100644
> --- a/include/uapi/linux/vfio.h
> +++ b/include/uapi/linux/vfio.h
> @@ -161,12 +161,38 @@ struct vfio_device_info {
> #define VFIO_DEVICE_FLAGS_PCI (1 << 1) /* vfio-pci device */
> #define VFIO_DEVICE_FLAGS_PLATFORM (1 << 2) /* vfio-platform device */
> #define VFIO_DEVICE_FLAGS_AMBA (1 << 3) /* vfio-amba device */
> +#define VFIO_DEVICE_FLAGS_DEV_PROPERTIES (1 << 4) /* Device properties */
> __u32 num_regions; /* Max region index + 1 */
> __u32 num_irqs; /* Max IRQ index + 1 */
> };
> #define VFIO_DEVICE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 7)
>
> /**
> + * VFIO_DEVICE_GET_DEV_PROPERTY - _IOR(VFIO_TYPE, VFIO_BASE + 16,
> + * struct vfio_devtree_info)
> + *
> + * Retrive a device property, e.g. from a device tree if available.
retrieve
from an HW description (device tree or ACPI)
> + * Caller will initialize data[] with a single string with the requested
needs to initialize data[] with the property name string?
> + * devicetree property name, and type depending on whether a array of strings
an array
> + * or an array of u32 values is expected. On success, data[] will be extended
> + * with the requested information, either as an array of u32, or with a list
> + * of strings sepparated by the NULL terminating character.
separated
> + * Return: 0 on success, -errno on failure.
> + */
> +struct vfio_dev_property {
> + __u32 argsz;
> + __u32 type;
> +#define VFIO_DEV_PROPERTY_TYPE_STRINGS 0
_STRING?
> +#define VFIO_DEV_PROPERTY_TYPE_U8 1
> +#define VFIO_DEV_PROPERTY_TYPE_U16 2
> +#define VFIO_DEV_PROPERTY_TYPE_U32 3
> +#define VFIO_DEV_PROPERTY_TYPE_U64 4
> + __u32 length;
you may comment length value as initialized by the user (size of the
string including the nul char?
> + __u8 data[];
> +};
> +#define VFIO_DEVICE_GET_DEV_PROPERTY _IO(VFIO_TYPE, VFIO_BASE + 17)
17 does not match figure in above comment
> +
> +/**
> * VFIO_DEVICE_GET_REGION_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 8,
> * struct vfio_region_info)
> *
>
prev parent reply other threads:[~2015-09-03 16:48 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1419024032-1269-1-git-send-email-a.motakis@virtualopensystems.com>
[not found] ` <1419024032-1269-1-git-send-email-a.motakis-lrHrjnjw1UfHK3s98zE1ajGjJy/sRE9J@public.gmane.org>
2014-12-19 21:20 ` [RFC PATCH v3 1/3] vfio: platform: add device properties skeleton and user API Antonios Motakis
[not found] ` <1419024032-1269-2-git-send-email-a.motakis-lrHrjnjw1UfHK3s98zE1ajGjJy/sRE9J@public.gmane.org>
2015-09-03 16:48 ` Eric Auger [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55E879F8.7000008@linaro.org \
--to=eric.auger-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=alex.williamson-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=b.reynal-lrHrjnjw1UfHK3s98zE1ajGjJy/sRE9J@public.gmane.org \
--cc=christoffer.dall-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org \
--cc=kvm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=kvmarm-FPEHb7Xf0XXUo1n7N8X6UoWGPAHP3yOg@public.gmane.org \
--cc=linux-api-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=tech-lrHrjnjw1UfHK3s98zE1ajGjJy/sRE9J@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).