selftests: clone3: clone3_clear_sighand failed - Bail out! Failed to clear signal handler for child process

selftests: clone3: clone3_clear_sighand failed - Bail out! Failed to clear signal handler for child process

[Naresh Kamboju]

selftests: clone3: clone3_clear_sighand failed on arm32 and i386
but passed on arm64 and x86_64.

Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>

# selftests: clone3: clone3_clear_sighand
# TAP version 13
# 1..1
# # clone3() syscall supported
# Bail out! Failed to clear signal handler for child process
# # Planned tests != run tests (1 != 0)
# # Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0
not ok 2 selftests: clone3: clone3_clear_sighand # exit=1

Test details links,
https://lkft.validation.linaro.org/scheduler/job/5820146#L1795

Test results comparison link,
https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20221107/testrun/12848543/suite/kselftest-clone3/test/clone3.clone3_clear_sighand/history/

metadata:
  git_ref: master
  git_repo: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next
  git_sha: b6fc3fddade7a194bd141a49f2689e50f796ef46
  git_describe: next-20221108
  kernel_version: 6.1.0-rc4
  kernel-config: https://builds.tuxbuild.com/2HFnr3jvzSvcbeO3iSMp7Fbvmmq/config
  build-url: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next/-/pipelines/688275399
  artifact-location: https://builds.tuxbuild.com/2HFnr3jvzSvcbeO3iSMp7Fbvmmq
  toolchain: gcc-11

--
Linaro LKFT
https://lkft.linaro.org

Re: selftests: clone3: clone3_clear_sighand failed - Bail out! Failed to clear signal handler for child process

[Christian Brauner]

On Tue, Nov 08, 2022 at 03:28:55PM +0530, Naresh Kamboju wrote:
> selftests: clone3: clone3_clear_sighand failed on arm32 and i386
> but passed on arm64 and x86_64.
> 
> Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
> 
> # selftests: clone3: clone3_clear_sighand
> # TAP version 13
> # 1..1
> # # clone3() syscall supported
> # Bail out! Failed to clear signal handler for child process
> # # Planned tests != run tests (1 != 0)
> # # Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0
> not ok 2 selftests: clone3: clone3_clear_sighand # exit=1
> 
> Test details links,
> https://lkft.validation.linaro.org/scheduler/job/5820146#L1795
> 
> Test results comparison link,
> https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20221107/testrun/12848543/suite/kselftest-clone3/test/clone3.clone3_clear_sighand/history/

Seems before 27 September 2022 this test wasn't run on 32bit instances
and noone ever noticed?

Re: selftests: clone3: clone3_clear_sighand failed - Bail out! Failed to clear signal handler for child process

[Naresh Kamboju]

On Tue, 8 Nov 2022 at 15:34, Christian Brauner <brauner@kernel.org> wrote:
>
> On Tue, Nov 08, 2022 at 03:28:55PM +0530, Naresh Kamboju wrote:
> > selftests: clone3: clone3_clear_sighand failed on arm32 and i386
> > but passed on arm64 and x86_64.
> >
> > Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
> >
> > # selftests: clone3: clone3_clear_sighand
> > # TAP version 13
> > # 1..1
> > # # clone3() syscall supported
> > # Bail out! Failed to clear signal handler for child process
> > # # Planned tests != run tests (1 != 0)
> > # # Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0
> > not ok 2 selftests: clone3: clone3_clear_sighand # exit=1
> >
> > Test details links,
> > https://lkft.validation.linaro.org/scheduler/job/5820146#L1795
> >
> > Test results comparison link,
> > https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20221107/testrun/12848543/suite/kselftest-clone3/test/clone3.clone3_clear_sighand/history/
>
> Seems before 27 September 2022 this test wasn't run on 32bit instances
> and noone ever noticed?

This email is about sharing the results log and reporting failures.
If you think it is not supported on 32bit the test should SKIP instead of fail.

We have test data available from more than a year,
https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20221107/testrun/12848543/suite/kselftest-clone3/test/clone3.clone3_clear_sighand/history/?page=13

- Naresh

Re: selftests: clone3: clone3_clear_sighand failed - Bail out! Failed to clear signal handler for child process

[Christian Brauner]

On Tue, Nov 08, 2022 at 03:51:24PM +0530, Naresh Kamboju wrote:
> On Tue, 8 Nov 2022 at 15:34, Christian Brauner <brauner@kernel.org> wrote:
> >
> > On Tue, Nov 08, 2022 at 03:28:55PM +0530, Naresh Kamboju wrote:
> > > selftests: clone3: clone3_clear_sighand failed on arm32 and i386
> > > but passed on arm64 and x86_64.
> > >
> > > Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
> > >
> > > # selftests: clone3: clone3_clear_sighand
> > > # TAP version 13
> > > # 1..1
> > > # # clone3() syscall supported
> > > # Bail out! Failed to clear signal handler for child process
> > > # # Planned tests != run tests (1 != 0)
> > > # # Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0
> > > not ok 2 selftests: clone3: clone3_clear_sighand # exit=1
> > >
> > > Test details links,
> > > https://lkft.validation.linaro.org/scheduler/job/5820146#L1795
> > >
> > > Test results comparison link,
> > > https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20221107/testrun/12848543/suite/kselftest-clone3/test/clone3.clone3_clear_sighand/history/
> >
> > Seems before 27 September 2022 this test wasn't run on 32bit instances
> > and noone ever noticed?
> 
> This email is about sharing the results log and reporting failures.
> If you think it is not supported on 32bit the test should SKIP instead of fail.

No, I was just asking whether this has been detected just now for the
first time. If this has been a problem for such a long time I was just
puzzled why this was never reported.

Re: selftests: clone3: clone3_clear_sighand failed - Bail out! Failed to clear signal handler for child process

[Florian Weimer]

* Naresh Kamboju:

> selftests: clone3: clone3_clear_sighand failed on arm32 and i386
> but passed on arm64 and x86_64.
>
> Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
>
> # selftests: clone3: clone3_clear_sighand
> # TAP version 13
> # 1..1
> # # clone3() syscall supported
> # Bail out! Failed to clear signal handler for child process
> # # Planned tests != run tests (1 != 0)
> # # Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0
> not ok 2 selftests: clone3: clone3_clear_sighand # exit=1

Not sure why you are reporting this to libc-alpha.  We'd like to help,
but there doesn't seem to be anything glibc-specific in this report?

Thanks,
Florian

Re: selftests: clone3: clone3_clear_sighand failed - Bail out! Failed to clear signal handler for child process

[Naresh Kamboju]

On Tue, 8 Nov 2022 at 16:05, Florian Weimer <fweimer@redhat.com> wrote:
>
> * Naresh Kamboju:
>
> > selftests: clone3: clone3_clear_sighand failed on arm32 and i386
> > but passed on arm64 and x86_64.
> >
> > Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
> >
> > # selftests: clone3: clone3_clear_sighand
> > # TAP version 13
> > # 1..1
> > # # clone3() syscall supported
> > # Bail out! Failed to clear signal handler for child process
> > # # Planned tests != run tests (1 != 0)
> > # # Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0
> > not ok 2 selftests: clone3: clone3_clear_sighand # exit=1
>
> Not sure why you are reporting this to libc-alpha.  We'd like to help,
> but there doesn't seem to be anything glibc-specific in this report?

This is coming from a commit log having CC to the libc-alpha list.
However, please ignore the report if it is not related.

--
tests: test CLONE_CLEAR_SIGHAND
Test that CLONE_CLEAR_SIGHAND resets signal handlers to SIG_DFL for the
child process and that CLONE_CLEAR_SIGHAND and CLONE_SIGHAND are
mutually exclusive.

Cc: Florian Weimer <fweimer@redhat.com>
Cc: libc-alpha@sourceware.org
Cc: linux-api@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20191014104538.3096-2-christian.brauner@ubuntu.com

>
> Thanks,
> Florian


- Naresh