Re: [PATCH] printk: Userspace format enumeration support

Re: [PATCH] printk: Userspace format enumeration support

[Petr Mladek]

Hi,

I would like to hear opinion from a bigger audience. It is an
userspace interface that we might need to maintain forewer.
Adding few more people in to CC:

Steven Rostedt <rostedt@goodmis.org>: printk co-maintainer
Alexey Dobriyan <adobriyan@gmail.com>: fs/proc maintainer
Greg Kroah-Hartman <gregkh@linuxfoundation.org>: sysfs maintainer
Jason Baron <jbaron@akamai.com>: dynamic_debug maintainer
Kees Cook <keescook@chromium.org>: security POV
linux-api@vger.kernel.org: Linux API mailing list

Of course, we should also ask if this is the right approach
for the think that you want to achieve.

The motivation for this patch is that the strings printed by kernels
are not reliable and you want a simple way to compare differences
bethween versions. Do I get it right?

See more comments below.



On Thu 2021-02-04 15:37:52, Chris Down wrote:
> We have a number of systems industry-wide that have a subset of their
> functionality that works as follows:
 
> 1. Receive a message from local kmsg, serial console, or netconsole;
> 2. Apply a set of rules to classify the message;
> 3. Do something based on this classification (like scheduling a
>    remediation for the machine), rinse, and repeat.
> 
> As a couple of examples of places we have this implemented just inside
> Facebook, although this isn't a Facebook-specific problem, we have this
> inside our netconsole processing (for alarm classification), and as part
> of our machine health checking. We use these messages to determine
> fairly important metrics around production health, and it's important
> that we get them right.
> 
> While for some kinds of issues we have counters, tracepoints, or metrics
> with a stable interface which can reliably indicate the issue, in order
> to react to production issues quickly we need to work with the interface
> which most kernel developers naturally use when developing: printk.
> 
> Most production issues come from unexpected phenomena, and as such
> usually the code in question doesn't have easily usable tracepoints or
> other counters available for the specific problem being mitigated. We
> have a number of lines of monitoring defence against problems in
> production (host metrics, process metrics, service metrics, etc), and
> where it's not feasible to reliably monitor at another level, this kind
> of pragmatic netconsole monitoring is essential.
> 
> As you'd expect, monitoring using printk is rather brittle for a number
> of reasons -- most notably that the message might disappear entirely in
> a new version of the kernel, or that the message may change in some way
> that the regex or other classification methods start to silently fail.

Another is that printk() is not reliable on its own. Messages might
get lost. The size of the log buffer is limited. Deamon reading
/dev/kmsg need not be scheduled in time or often enough. Console
might be slow. The messages are filtered on the console by console_loglevel.


> One factor that makes this even harder is that, under normal operation,
> many of these messages are never expected to be hit. For example, there
> may be some rare hardware bug which you want to detect if it was to ever
> happen again, but its recurrence is not likely or anticipated. This
> precludes using something like checking whether the printk in question
> was printed somewhere fleetwide recently to determine whether the
> message in question is still present or not, since we don't anticipate
> that it should be printed anywhere, but still need to monitor for its
> future presence in the long-term.
> 
> This class of issue has happened on a number of occasions, causing
> unhealthy machines with hardware issues to remain in production for
> longer than ideal. As a recent example, some monitoring around
> blk_update_request fell out of date and caused semi-broken machines to
> remain in production for longer than would be desirable.
> 
> Searching through the codebase to find the message is also extremely
> fragile, because many of the messages are further constructed beyond
> their callsite (eg. btrfs_printk and other module-specific wrappers,
> each with their own functionality). Even if they aren't, guessing the
> format and formulation of the underlying message based on the aesthetics
> of the message emitted is not a recipe for success at scale, and our
> previous issues with fleetwide machine health checking demonstrate as
> much.
> 
> This patch provides a solution to the issue of silently changed or
> deleted printks: we record pointers to all printk format strings known
> at compile time into a new .printk_fmts section, both in vmlinux and
> modules. At runtime, this can then be iterated by looking at
> /proc/printk_formats, which emits the same format as `printk` itself,
> which we already export elsewhere (for example, in netconsole):
> 
>     # Format: <module>,<facility><level><format>\0
>     $ perl -p -e 's/\n/\\n/g;s/\0/\n/g' /proc/printk_formats | shuf -n 5
>     vmlinux,6Disabling APIC timer\n
>     intel_rapl_common,3intel_rapl_common: Cannot find matching power limit for constraint %d\n
>     dm_crypt,3device-mapper: crypt: %s: INTEGRITY AEAD ERROR, sector %llu\n
>     mac80211,6%s: AP bug: HT capability missing from AssocResp\n
>     vmlinux,3zpool: couldn't create zpool - out of memory\n

The facility and log level are not well separated from the format string.

Also this is yet another style how the format is displayed. We already have

	+ console/syslog: formated by record_print_text()
	+ /dev/kmsg: formatted by info_print_ext_header(),  msg_print_ext_body().
	+ /sys/kernel/debug/dynamic_debug/control
	+ /sys/kernel/debug/tracing/printk_formats

We should get some inspiration from the existing interfaces.

But we first should decide what information might be useful:

   + 'facility' should not be needed. All messages should be from
      kernel.

   + <module> is already optinaly added by pr_fmt() to the printed strings
     as:  pr_fmt(): ...

   + dynamic_debug seems to print KBUILD_MODNAME even when the module
     is built in.

   + dynamic debug also prints <source_file:line>



> This mitigates the majority of cases where we have a highly-specific
> printk which we want to match on, as we can now enumerate and check
> whether the format changed or the printk callsite disappeared entirely
> in userspace. This allows us to catch changes to printks we monitor
> earlier and decide what to do about it before it becomes problematic.
> 
> There is no additional runtime cost for printk callers or printk itself,
> and the assembly generated is exactly the same.
> 
> Signed-off-by: Chris Down <chris@chrisdown.name>
> Cc: Petr Mladek <pmladek@suse.com>
> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
> Cc: John Ogness <john.ogness@linutronix.de>
> Cc: Johannes Weiner <hannes@cmpxchg.org>
> Cc: Andrew Morton <akpm@linux-foundation.org>
> ---
>  arch/arm/kernel/entry-v7m.S          |   2 +-
>  arch/arm/lib/backtrace-clang.S       |   2 +-
>  arch/arm/lib/backtrace.S             |   2 +-
>  arch/arm/mach-rpc/io-acorn.S         |   2 +-
>  arch/arm/vfp/vfphw.S                 |   6 +-
>  arch/openrisc/kernel/entry.S         |   6 +-
>  arch/powerpc/kernel/head_fsl_booke.S |   2 +-
>  arch/x86/kernel/head_32.S            |   2 +-
>  include/asm-generic/vmlinux.lds.h    |  13 ++
>  include/linux/module.h               |   5 +
>  include/linux/printk.h               |  43 +++++-
>  init/Kconfig                         |  15 ++
>  kernel/module.c                      |   5 +
>  kernel/printk/printk.c               | 196 ++++++++++++++++++++++++++-
>  14 files changed, 280 insertions(+), 21 deletions(-)
> 
> diff --git a/arch/arm/kernel/entry-v7m.S b/arch/arm/kernel/entry-v7m.S
> index d0e898608d30..7bde93c10962 100644
> --- a/arch/arm/kernel/entry-v7m.S
> +++ b/arch/arm/kernel/entry-v7m.S
> @@ -23,7 +23,7 @@ __invalid_entry:
>  	adr	r0, strerr
>  	mrs	r1, ipsr
>  	mov	r2, lr
> -	bl	printk
> +	bl	_printk
>  #endif
>  	mov	r0, sp
>  	bl	show_regs
> diff --git a/arch/arm/lib/backtrace-clang.S b/arch/arm/lib/backtrace-clang.S
> index 6174c45f53a5..5b2cdb1003e3 100644
> --- a/arch/arm/lib/backtrace-clang.S
> +++ b/arch/arm/lib/backtrace-clang.S
> @@ -202,7 +202,7 @@ finished_setup:
>  1006:		adr	r0, .Lbad
>  		mov	r1, loglvl
>  		mov	r2, frame
> -		bl	printk
> +		bl	_printk
>  no_frame:	ldmfd	sp!, {r4 - r9, fp, pc}
>  ENDPROC(c_backtrace)
>  		.pushsection __ex_table,"a"
> diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S
> index 872f658638d9..e8408f22d4dc 100644
> --- a/arch/arm/lib/backtrace.S
> +++ b/arch/arm/lib/backtrace.S
> @@ -103,7 +103,7 @@ for_each_frame:	tst	frame, mask		@ Check for address exceptions
>  1006:		adr	r0, .Lbad
>  		mov	r1, loglvl
>  		mov	r2, frame
> -		bl	printk
> +		bl	_printk
>  no_frame:	ldmfd	sp!, {r4 - r9, pc}
>  ENDPROC(c_backtrace)
>  		
> diff --git a/arch/arm/mach-rpc/io-acorn.S b/arch/arm/mach-rpc/io-acorn.S
> index b9082a2a2a01..aa9bf0d771c0 100644
> --- a/arch/arm/mach-rpc/io-acorn.S
> +++ b/arch/arm/mach-rpc/io-acorn.S
> @@ -25,4 +25,4 @@ ENTRY(insl)
>  ENTRY(outsl)
>  		adr	r0, .Liosl_warning
>  		mov	r1, lr
> -		b	printk
> +		b	_printk
> diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
> index d5837bf05a9a..6f7926c9c179 100644
> --- a/arch/arm/vfp/vfphw.S
> +++ b/arch/arm/vfp/vfphw.S
> @@ -23,7 +23,7 @@
>  #ifdef DEBUG
>  	stmfd	sp!, {r0-r3, ip, lr}
>  	ldr	r0, =1f
> -	bl	printk
> +	bl	_printk
>  	ldmfd	sp!, {r0-r3, ip, lr}
>  
>  	.pushsection .rodata, "a"
> @@ -38,7 +38,7 @@
>  	stmfd	sp!, {r0-r3, ip, lr}
>  	mov	r1, \arg
>  	ldr	r0, =1f
> -	bl	printk
> +	bl	_printk
>  	ldmfd	sp!, {r0-r3, ip, lr}
>  
>  	.pushsection .rodata, "a"
> @@ -55,7 +55,7 @@
>  	mov	r2, \arg2
>  	mov	r1, \arg1
>  	ldr	r0, =1f
> -	bl	printk
> +	bl	_printk
>  	ldmfd	sp!, {r0-r3, ip, lr}
>  
>  	.pushsection .rodata, "a"
> diff --git a/arch/openrisc/kernel/entry.S b/arch/openrisc/kernel/entry.S
> index bc657e55c15f..947613f61d4a 100644
> --- a/arch/openrisc/kernel/entry.S
> +++ b/arch/openrisc/kernel/entry.S
> @@ -551,7 +551,7 @@ EXCEPTION_ENTRY(_external_irq_handler)
>  	l.movhi r3,hi(42f)
>  	l.ori	r3,r3,lo(42f)
>  	l.sw    0x0(r1),r3
> -	l.jal   printk
> +	l.jal   _printk
>  	l.sw    0x4(r1),r4
>  	l.addi  r1,r1,0x8
>  
> @@ -681,8 +681,8 @@ _syscall_debug:
>  	l.sw    -4(r1),r27
>  	l.sw    -8(r1),r11
>  	l.addi  r1,r1,-8
> -	l.movhi r27,hi(printk)
> -	l.ori   r27,r27,lo(printk)
> +	l.movhi r27,hi(_printk)
> +	l.ori   r27,r27,lo(_printk)
>  	l.jalr  r27
>  	 l.nop
>  	l.addi  r1,r1,8
> diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
> index fdd4d274c245..f2c7ecef9b14 100644
> --- a/arch/powerpc/kernel/head_fsl_booke.S
> +++ b/arch/powerpc/kernel/head_fsl_booke.S
> @@ -852,7 +852,7 @@ KernelSPE:
>  	ori	r3,r3,87f@l
>  	mr	r4,r2		/* current */
>  	lwz	r5,_NIP(r1)
> -	bl	printk
> +	bl	_printk
>  #endif
>  	b	ret_from_except
>  #ifdef CONFIG_PRINTK
> diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
> index 7ed84c282233..c207b789dd22 100644
> --- a/arch/x86/kernel/head_32.S
> +++ b/arch/x86/kernel/head_32.S
> @@ -446,7 +446,7 @@ SYM_FUNC_START(early_ignore_irq)
>  	pushl 32(%esp)
>  	pushl 40(%esp)
>  	pushl $int_msg
> -	call printk
> +	call _printk
>  
>  	call dump_stack
>  
> diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
> index 34b7e0d2346c..0ca6e28e05d6 100644
> --- a/include/asm-generic/vmlinux.lds.h
> +++ b/include/asm-generic/vmlinux.lds.h
> @@ -309,6 +309,17 @@
>  #define ACPI_PROBE_TABLE(name)
>  #endif
>  
> +#ifdef CONFIG_PRINTK_ENUMERATION
> +#define PRINTK_FMTS							\
> +	.printk_fmts : AT(ADDR(.printk_fmts) - LOAD_OFFSET) {		\
> +		__start_printk_fmts = .;				\
> +		*(.printk_fmts)						\
> +		__stop_printk_fmts = .;					\
> +	}
> +#else
> +#define PRINTK_FMTS
> +#endif

It should be defined after #define TRACEDATA to follow the existing
style.

But honestly I am not much familiar with the sections definitions.
I am curious why TRACE_PRINTKS() and __dyndbg are defined
a bit different way.


> +
>  #ifdef CONFIG_THERMAL
>  #define THERMAL_TABLE(name)						\
>  	. = ALIGN(8);							\
> @@ -480,6 +491,8 @@
>  									\
>  	TRACEDATA							\
>  									\
> +	PRINTK_FMTS							\
> +									\
>  	/* Kernel symbol table: Normal symbols */			\
>  	__ksymtab         : AT(ADDR(__ksymtab) - LOAD_OFFSET) {		\
>  		__start___ksymtab = .;					\
> diff --git a/include/linux/module.h b/include/linux/module.h
> index 7a0bcb5b1ffc..4235b14a22ef 100644
> --- a/include/linux/module.h
> +++ b/include/linux/module.h
> @@ -516,6 +516,11 @@ struct module {
>  	struct klp_modinfo *klp_info;
>  #endif
>  
> +#ifdef CONFIG_PRINTK_ENUMERATION
> +	unsigned int printk_fmts_sec_size;
> +	const char **printk_fmts_start;
> +#endif
> +
>  #ifdef CONFIG_MODULE_UNLOAD
>  	/* What modules depend on me? */
>  	struct list_head source_list;
> diff --git a/include/linux/printk.h b/include/linux/printk.h
> index d3c08095a9a3..745a9915ec72 100644
> --- a/include/linux/printk.h
> +++ b/include/linux/printk.h
> @@ -173,12 +173,12 @@ asmlinkage __printf(1, 0)
>  int vprintk(const char *fmt, va_list args);
>  
>  asmlinkage __printf(1, 2) __cold
> -int printk(const char *fmt, ...);
> +int _printk(const char *fmt, ...);
>  
>  /*
>   * Special printk facility for scheduler/timekeeping use only, _DO_NOT_USE_ !
>   */
> -__printf(1, 2) __cold int printk_deferred(const char *fmt, ...);
> +__printf(1, 2) __cold int _printk_deferred(const char *fmt, ...);
>  
>  /*
>   * Please don't use printk_ratelimit(), because it shares ratelimiting state
> @@ -216,12 +216,12 @@ int vprintk(const char *s, va_list args)
>  	return 0;
>  }
>  static inline __printf(1, 2) __cold
> -int printk(const char *s, ...)
> +int _printk(const char *s, ...)
>  {
>  	return 0;
>  }
>  static inline __printf(1, 2) __cold
> -int printk_deferred(const char *s, ...)
> +int _printk_deferred(const char *s, ...)
>  {
>  	return 0;
>  }
> @@ -284,6 +284,11 @@ static inline void printk_safe_flush_on_panic(void)
>  
>  extern int kptr_restrict;
>  
> +#ifdef CONFIG_PRINTK_ENUMERATION
> +extern const char *__start_printk_fmts[];
> +extern const char *__stop_printk_fmts[];
> +#endif
> +
>  /**
>   * pr_fmt - used by the pr_*() macros to generate the printk format string
>   * @fmt: format string passed from a pr_*() macro
> @@ -301,6 +306,36 @@ extern int kptr_restrict;
>  #define pr_fmt(fmt) fmt
>  #endif
>  
> +#ifdef CONFIG_PRINTK_ENUMERATION
> +#define printk_store_fmt(func, fmt, ...)				       \
> +	({								       \
> +		int _printk_ret;					       \
> +									       \
> +		if (__builtin_constant_p(fmt)) {			       \
> +			/*
> +			 * The compiler may not be able to eliminate this
> +			 * branch, so we need to make sure that it doesn't see
> +			 * any hypothetical assignment for non-constants even
> +			 * though this is already inside the
> +			 * __builtin_constant_p guard.
> +			 */						       \
> +			static const char *_fmt __section(".printk_fmts") =    \
> +				__builtin_constant_p(fmt) ? fmt : NULL;	       \
> +			_printk_ret = func(_fmt, ##__VA_ARGS__);	       \
> +		} else							       \
> +			_printk_ret = func(fmt, ##__VA_ARGS__);		       \
> +									       \
> +		_printk_ret;						       \
> +	})
> +
> +#define printk(fmt, ...) printk_store_fmt(_printk, fmt, ##__VA_ARGS__)
> +#define printk_deferred(fmt, ...)					       \
> +	printk_store_fmt(_printk_deferred, fmt, ##__VA_ARGS__)
> +#else /* !CONFIG_PRINTK_ENUMERATION */
> +#define printk(...) _printk(__VA_ARGS__)
> +#define printk_deferred(...) _printk_deferred(__VA_ARGS__)
> +#endif /* CONFIG_PRINTK_ENUMERATION */
> +
>  /**
>   * pr_emerg - Print an emergency-level message
>   * @fmt: format string
> diff --git a/init/Kconfig b/init/Kconfig
> index e4e2932da237..d0839e901267 100644
> --- a/init/Kconfig
> +++ b/init/Kconfig
> @@ -764,6 +764,21 @@ config PRINTK_SAFE_LOG_BUF_SHIFT
>  		     13 =>   8 KB for each CPU
>  		     12 =>   4 KB for each CPU
>  
> +config PRINTK_ENUMERATION
> +	bool "/proc/printk_formats support"
> +	depends on PRINTK
> +	help
> +	  Add support for enumeration of all printk formats known at compile
> +	  time at /proc/printk_formats. This includes printk formats built into
> +	  the kernel, and those in loaded modules.
> +
> +	  This can be used as part of maintaining daemons which monitor
> +	  /dev/kmsg, as it permits auditing the printk formats present in a
> +	  kernel, allowing monitoring of cases where monitored printks are
> +	  changed or no longer present.
> +
> +	  There is no additional runtime cost to printk with this enabled.
> +
>  #
>  # Architectures with an unreliable sched_clock() should select this:
>  #
> diff --git a/kernel/module.c b/kernel/module.c
> index 6ad424f07a4a..143f00545202 100644
> --- a/kernel/module.c
> +++ b/kernel/module.c
> @@ -3430,6 +3430,11 @@ static int find_module_sections(struct module *mod, struct load_info *info)
>  						sizeof(unsigned long),
>  						&mod->num_kprobe_blacklist);
>  #endif
> +#ifdef CONFIG_PRINTK_ENUMERATION
> +	mod->printk_fmts_start = section_objs(info, ".printk_fmts",
> +					      sizeof(*mod->printk_fmts_start),
> +					      &mod->printk_fmts_sec_size);
> +#endif
>  #ifdef CONFIG_HAVE_STATIC_CALL_INLINE
>  	mod->static_call_sites = section_objs(info, ".static_call_sites",
>  					      sizeof(*mod->static_call_sites),
> diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
> index 6639a0cfe0ac..57142f126a1b 100644
> --- a/kernel/printk/printk.c
> +++ b/kernel/printk/printk.c
> @@ -47,6 +47,7 @@
>  #include <linux/sched/clock.h>
>  #include <linux/sched/debug.h>
>  #include <linux/sched/task_stack.h>
> +#include <linux/proc_fs.h>
>  
>  #include <linux/uaccess.h>
>  #include <asm/sections.h>
> @@ -617,6 +618,188 @@ static ssize_t msg_print_ext_body(char *buf, size_t size,
>  	return len;
>  }
>  
> +#ifdef CONFIG_PRINTK_ENUMERATION
> +
> +/* /proc/printk_formats - userspace enumeration of printk formats  */
> +
> +struct printk_fmt_sec {
> +	struct list_head list;
> +	const struct module *module;
> +	const char **start;
> +	const char **end;
> +};
> +
> +/*
> + * Stores .printk_fmt section boundaries for vmlinux and all loaded modules.
> + * Add entries with store_printk_fmt_sec, remove entries with
> + * remove_printk_fmt_sec.
> + */
> +static LIST_HEAD(printk_fmts_list);
> +
> +/*
> + * To prevent mutation, hold printk_fmts_mutex. If mutation is acceptable, this
> + * can be read at any time without the mutex as long as it is read with
> + * protection against data tearing.
> + */
> +static size_t printk_fmts_total_size;
> +
> +/* For printk_fmts_list and printk_fmts_total_size. */
> +static DEFINE_MUTEX(printk_fmts_mutex);
> +
> +static void store_printk_fmt_sec(const struct module *mod, const char **start,
> +				 const char **end)
> +{
> +	struct printk_fmt_sec *ps = NULL;
> +	const char **fptr = NULL;
> +	size_t size = 0;
> +
> +	ps = kmalloc(sizeof(struct printk_fmt_sec), GFP_KERNEL);
> +	if (!ps)
> +		return;
> +
> +	ps->module = mod;
> +	ps->start = start;
> +	ps->end = end;
> +
> +	for (fptr = ps->start; fptr < ps->end; fptr++)
> +		size += strlen(*fptr) + 1;
> +
> +	mutex_lock(&printk_fmts_mutex);
> +	WRITE_ONCE(printk_fmts_total_size, printk_fmts_total_size + size);
> +	list_add_tail(&ps->list, &printk_fmts_list);
> +	mutex_unlock(&printk_fmts_mutex);
> +}
> +
> +#ifdef CONFIG_MODULES
> +
> +static void remove_printk_fmt_sec(const struct module *mod)
> +{
> +	struct printk_fmt_sec *tmp = NULL, *ps = NULL;
> +	const char **fptr = NULL;
> +
> +	if (WARN_ON_ONCE(!mod))
> +		return;
> +
> +	mutex_lock(&printk_fmts_mutex);
> +
> +	list_for_each_entry_safe(ps, tmp, &printk_fmts_list, list) {
> +		if (ps->module == mod) {
> +			size_t new_size = printk_fmts_total_size;
> +
> +			for (fptr = ps->start; fptr < ps->end; fptr++)
> +				new_size -= strlen(*fptr) + 1;
> +
> +			WRITE_ONCE(printk_fmts_total_size, new_size);
> +			list_del(&ps->list);
> +			kfree(ps);
> +			break;
> +		}
> +	}
> +
> +	mutex_unlock(&printk_fmts_mutex);
> +}
> +
> +static int module_printk_fmts_notify(struct notifier_block *self,
> +				     unsigned long val, void *data)
> +{
> +	const struct module *mod = data;
> +
> +	if (mod->printk_fmts_sec_size) {
> +		switch (val) {
> +		case MODULE_STATE_COMING:
> +			store_printk_fmt_sec(mod, mod->printk_fmts_start,
> +					     mod->printk_fmts_start +
> +						     mod->printk_fmts_sec_size);
> +			break;
> +
> +		case MODULE_STATE_GOING:
> +			remove_printk_fmt_sec(mod);
> +			break;
> +		}
> +	}
> +
> +	return NOTIFY_OK;
> +}
> +
> +static const char *ps_get_module_name(const struct printk_fmt_sec *ps)
> +{
> +	return ps->module ? ps->module->name : "vmlinux";
> +}
> +
> +static struct notifier_block module_printk_fmts_nb = {
> +	.notifier_call = module_printk_fmts_notify,
> +};
> +
> +static int __init module_printk_fmts_init(void)
> +{
> +	return register_module_notifier(&module_printk_fmts_nb);
> +}
> +
> +core_initcall(module_printk_fmts_init);
> +
> +#else /* !CONFIG_MODULES */
> +static const char *ps_get_module_name(const struct printk_fmt_sec *ps)
> +{
> +	return "vmlinux";
> +}
> +#endif /* CONFIG_MODULES */
> +
> +static int proc_pf_show(struct seq_file *s, void *v)
> +{
> +	const struct printk_fmt_sec *ps = NULL;
> +	const char **fptr = NULL;
> +
> +	mutex_lock(&printk_fmts_mutex);
> +
> +	list_for_each_entry(ps, &printk_fmts_list, list) {
> +		const char *mod_name = ps_get_module_name(ps);
> +
> +		for (fptr = ps->start; fptr < ps->end; fptr++) {
> +			seq_puts(s, mod_name);
> +			seq_putc(s, ',');
> +			seq_puts(s, *fptr);
> +			seq_putc(s, '\0');
> +		}

You probably should get inspiration from t_show() in trace_printk.c.
It handles newlines, ...

Or by ddebug_proc_show(). It uses seq_escape().

Anyway, there is something wrong at the moment. The output looks fine
with cat. But "less" says that it is a binary format and the output
is a bit messy:

$> less /proc/printk_formats 
"/proc/printk_formats" may be a binary file.  See it anyway? 
vmlinux,^A3Warning: unable to open an initial console.
^@vmlinux,^A3Failed to execute %s (error %d)
^@vmlinux,^A6Kernel memory protection disabled.
^@vmlinux,^A3Starting init: %s exists but couldn't execute it (error %d)


That is for now. I still have to think about it. And I am also curious
about what others thing about this idea.

Best Regards,
Petr

> +	}
> +
> +	mutex_unlock(&printk_fmts_mutex);
> +
> +	return 0;
> +}
> +
> +static int proc_pf_open(struct inode *inode, struct file *file)
> +{
> +	/*
> +	 * We don't need to hold the mutex here to ensure that
> +	 * printk_fmts_total_size doesn't change prior to iteration -- worst
> +	 * case, seq_read_iter() will reallocate.
> +	 */
> +	return single_open_size(file, proc_pf_show, NULL,
> +		READ_ONCE(printk_fmts_total_size));
> +}
> +
> +static const struct proc_ops printk_proc_ops = {
> +	.proc_flags	= PROC_ENTRY_PERMANENT,
> +	.proc_open	= proc_pf_open,
> +	.proc_read_iter	= seq_read_iter,
> +	.proc_lseek	= seq_lseek,
> +	.proc_release	= single_release,
> +};
> +
> +static int __init init_printk_fmts(void)
> +{
> +	const struct proc_dir_entry *pd = NULL;
> +
> +	store_printk_fmt_sec(NULL, __start_printk_fmts, __stop_printk_fmts);
> +	pd = proc_create("printk_formats", 0, NULL, &printk_proc_ops);
> +
> +	return pd ? 0 : -ENOMEM;
> +}
> +
> +core_initcall(init_printk_fmts);
> +
> +#endif /* CONFIG_PRINTK_ENUMERATION */
> +
>  /* /dev/kmsg - userspace message inject/listen interface */
>  struct devkmsg_user {
>  	u64 seq;
> @@ -2111,10 +2294,13 @@ int vprintk_default(const char *fmt, va_list args)
>  EXPORT_SYMBOL_GPL(vprintk_default);
>  
>  /**
> - * printk - print a kernel message
> + * _printk - print a kernel message
>   * @fmt: format string
>   *
> - * This is printk(). It can be called from any context. We want it to work.
> + * This is _printk(). It can be called from any context. We want it to work.
> + *
> + * If printk enumeration is enabled, _printk() is called from printk_store_fmt.
> + * Otherwise, printk is simply #defined to _printk.
>   *
>   * We try to grab the console_lock. If we succeed, it's easy - we log the
>   * output and call the console drivers.  If we fail to get the semaphore, we
> @@ -2131,7 +2317,7 @@ EXPORT_SYMBOL_GPL(vprintk_default);
>   *
>   * See the vsnprintf() documentation for format string extensions over C99.
>   */
> -asmlinkage __visible int printk(const char *fmt, ...)
> +asmlinkage __visible int _printk(const char *fmt, ...)
>  {
>  	va_list args;
>  	int r;
> @@ -2142,7 +2328,7 @@ asmlinkage __visible int printk(const char *fmt, ...)
>  
>  	return r;
>  }
> -EXPORT_SYMBOL(printk);
> +EXPORT_SYMBOL(_printk);
>  
>  #else /* CONFIG_PRINTK */
>  
> @@ -3133,7 +3319,7 @@ int vprintk_deferred(const char *fmt, va_list args)
>  	return r;
>  }
>  
> -int printk_deferred(const char *fmt, ...)
> +int _printk_deferred(const char *fmt, ...)
>  {
>  	va_list args;
>  	int r;
> -- 
> 2.30.0

Re: [PATCH] printk: Userspace format enumeration support

[Steven Rostedt]

On Fri, 5 Feb 2021 17:42:55 +0100
Petr Mladek <pmladek@suse.com> wrote:

> Hi,
> 
> I would like to hear opinion from a bigger audience. It is an
> userspace interface that we might need to maintain forewer.
> Adding few more people in to CC:
> 
> Steven Rostedt <rostedt@goodmis.org>: printk co-maintainer

Thanks for Cc'ing me.

> Alexey Dobriyan <adobriyan@gmail.com>: fs/proc maintainer
> Greg Kroah-Hartman <gregkh@linuxfoundation.org>: sysfs maintainer
> Jason Baron <jbaron@akamai.com>: dynamic_debug maintainer
> Kees Cook <keescook@chromium.org>: security POV
> linux-api@vger.kernel.org: Linux API mailing list
> 
> Of course, we should also ask if this is the right approach
> for the think that you want to achieve.
> 
> The motivation for this patch is that the strings printed by kernels
> are not reliable and you want a simple way to compare differences
> bethween versions. Do I get it right?
> 
> See more comments below.
> 
> 


> Also this is yet another style how the format is displayed. We already have
> 
> 	+ console/syslog: formated by record_print_text()
> 	+ /dev/kmsg: formatted by info_print_ext_header(),  msg_print_ext_body().
> 	+ /sys/kernel/debug/dynamic_debug/control


> 	+ /sys/kernel/debug/tracing/printk_formats
> 
> We should get some inspiration from the existing interfaces.

Interesting, because when I was looking at the original patch (looked at
the lore link before reading your reply), I thought to myself "this looks
exactly like what I did for trace_printk formats", which the above file is
where it is shown. I'm curious if this work was inspired by that?



> > diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
> > index 34b7e0d2346c..0ca6e28e05d6 100644
> > --- a/include/asm-generic/vmlinux.lds.h
> > +++ b/include/asm-generic/vmlinux.lds.h
> > @@ -309,6 +309,17 @@
> >  #define ACPI_PROBE_TABLE(name)
> >  #endif
> >  
> > +#ifdef CONFIG_PRINTK_ENUMERATION
> > +#define PRINTK_FMTS							\
> > +	.printk_fmts : AT(ADDR(.printk_fmts) - LOAD_OFFSET) {		\
> > +		__start_printk_fmts = .;				\
> > +		*(.printk_fmts)						\
> > +		__stop_printk_fmts = .;					\
> > +	}
> > +#else
> > +#define PRINTK_FMTS
> > +#endif  
> 
> It should be defined after #define TRACEDATA to follow the existing
> style.
> 
> But honestly I am not much familiar with the sections definitions.
> I am curious why TRACE_PRINTKS() and __dyndbg are defined
> a bit different way.
> 

I'm not sure what difference you mean.

> > +static int proc_pf_show(struct seq_file *s, void *v)
> > +{
> > +	const struct printk_fmt_sec *ps = NULL;
> > +	const char **fptr = NULL;
> > +
> > +	mutex_lock(&printk_fmts_mutex);
> > +
> > +	list_for_each_entry(ps, &printk_fmts_list, list) {
> > +		const char *mod_name = ps_get_module_name(ps);
> > +
> > +		for (fptr = ps->start; fptr < ps->end; fptr++) {
> > +			seq_puts(s, mod_name);
> > +			seq_putc(s, ',');
> > +			seq_puts(s, *fptr);
> > +			seq_putc(s, '\0');
> > +		}  
> 
> You probably should get inspiration from t_show() in trace_printk.c.
> It handles newlines, ...
> 
> Or by ddebug_proc_show(). It uses seq_escape().
> 
> Anyway, there is something wrong at the moment. The output looks fine
> with cat. But "less" says that it is a binary format and the output
> is a bit messy:

Hmm, that's usually the case when lseek gets messed up. Not sure how that
happened.

> 
> $> less /proc/printk_formats   
> "/proc/printk_formats" may be a binary file.  See it anyway? 
> vmlinux,^A3Warning: unable to open an initial console.
> ^@vmlinux,^A3Failed to execute %s (error %d)
> ^@vmlinux,^A6Kernel memory protection disabled.
> ^@vmlinux,^A3Starting init: %s exists but couldn't execute it (error %d)
> 
> 
> That is for now. I still have to think about it. And I am also curious
> about what others thing about this idea.
> 

I'm not against the idea. I don't think it belongs in /proc. Perhaps
debugfs is a better place to put it.

-- Steve

Re: [PATCH] printk: Userspace format enumeration support

[Chris Down]

Hi Steven,

Steven Rostedt writes:
>Interesting, because when I was looking at the original patch (looked at
>the lore link before reading your reply), I thought to myself "this looks
>exactly like what I did for trace_printk formats", which the above file is
>where it is shown. I'm curious if this work was inspired by that?

The double __builtin_constant_p() trick was suggested by Johannes based on 
prior art in trace_puts() just prior to patch submission. Other than that, it 
seems we came up with basically the same solution independently. :-)

>> Anyway, there is something wrong at the moment. The output looks fine
>> with cat. But "less" says that it is a binary format and the output
>> is a bit messy:
>
>Hmm, that's usually the case when lseek gets messed up. Not sure how that
>happened.

It looks as intended to me -- none of the newlines, nulls, or other control 
sequences are escaped currently, since I didn't immediately see a reason to do 
that. If that's a blocker though, I'm happy to change it.

>> $> less /proc/printk_formats
>> "/proc/printk_formats" may be a binary file.  See it anyway?
>> vmlinux,^A3Warning: unable to open an initial console.
>> ^@vmlinux,^A3Failed to execute %s (error %d)
>> ^@vmlinux,^A6Kernel memory protection disabled.
>> ^@vmlinux,^A3Starting init: %s exists but couldn't execute it (error %d)
>>
>>
>> That is for now. I still have to think about it. And I am also curious
>> about what others thing about this idea.
>>
>
>I'm not against the idea. I don't think it belongs in /proc. Perhaps
>debugfs is a better place to put it.

Any location is fine with me, as long as it gets to userspace. How does 
<debugfs>/printk/formats or <debugfs>/printk/formats/<module> sound to you?

Thanks,

Chris

Re: [PATCH] printk: Userspace format enumeration support

[Steven Rostedt]

On Fri, 5 Feb 2021 22:45:19 +0000
Chris Down <chris@chrisdown.name> wrote:

> >I'm not against the idea. I don't think it belongs in /proc. Perhaps
> >debugfs is a better place to put it.  
> 
> Any location is fine with me, as long as it gets to userspace. How does 
> <debugfs>/printk/formats or <debugfs>/printk/formats/<module> sound to you?

I'm fine with it, if others are.

Something like this will probably need approval from others on the Cc list
here.

-- Steve

Re: [PATCH] printk: Userspace format enumeration support

[Greg Kroah-Hartman]

On Fri, Feb 05, 2021 at 10:45:19PM +0000, Chris Down wrote:
> Hi Steven,
> 
> Steven Rostedt writes:
> > Interesting, because when I was looking at the original patch (looked at
> > the lore link before reading your reply), I thought to myself "this looks
> > exactly like what I did for trace_printk formats", which the above file is
> > where it is shown. I'm curious if this work was inspired by that?
> 
> The double __builtin_constant_p() trick was suggested by Johannes based on
> prior art in trace_puts() just prior to patch submission. Other than that,
> it seems we came up with basically the same solution independently. :-)
> 
> > > Anyway, there is something wrong at the moment. The output looks fine
> > > with cat. But "less" says that it is a binary format and the output
> > > is a bit messy:
> > 
> > Hmm, that's usually the case when lseek gets messed up. Not sure how that
> > happened.
> 
> It looks as intended to me -- none of the newlines, nulls, or other control
> sequences are escaped currently, since I didn't immediately see a reason to
> do that. If that's a blocker though, I'm happy to change it.
> 
> > > $> less /proc/printk_formats
> > > "/proc/printk_formats" may be a binary file.  See it anyway?
> > > vmlinux,^A3Warning: unable to open an initial console.
> > > ^@vmlinux,^A3Failed to execute %s (error %d)
> > > ^@vmlinux,^A6Kernel memory protection disabled.
> > > ^@vmlinux,^A3Starting init: %s exists but couldn't execute it (error %d)
> > > 
> > > 
> > > That is for now. I still have to think about it. And I am also curious
> > > about what others thing about this idea.
> > > 
> > 
> > I'm not against the idea. I don't think it belongs in /proc. Perhaps
> > debugfs is a better place to put it.
> 
> Any location is fine with me, as long as it gets to userspace. How does
> <debugfs>/printk/formats or <debugfs>/printk/formats/<module> sound to you?

That's fine with me, but I'd like to see the patch with this in it first
before approving it :)

thanks,

greg k-h

Re: [PATCH] printk: Userspace format enumeration support

[Chris Down]

Greg Kroah-Hartman writes:
>> > I'm not against the idea. I don't think it belongs in /proc. Perhaps
>> > debugfs is a better place to put it.
>>
>> Any location is fine with me, as long as it gets to userspace. How does
>> <debugfs>/printk/formats or <debugfs>/printk/formats/<module> sound to you?
>
>That's fine with me, but I'd like to see the patch with this in it first
>before approving it :)

Thanks! I'll send v2 soon then with the aforementioned changes, and a move to 
debugfs.

Re: [PATCH] printk: Userspace format enumeration support

[Chris Down]

Hi Petr,

Thanks for looking over the patch. :-)

Petr Mladek writes:
>> Most production issues come from unexpected phenomena, and as such
>> usually the code in question doesn't have easily usable tracepoints or
>> other counters available for the specific problem being mitigated. We
>> have a number of lines of monitoring defence against problems in
>> production (host metrics, process metrics, service metrics, etc), and
>> where it's not feasible to reliably monitor at another level, this kind
>> of pragmatic netconsole monitoring is essential.
>>
>> As you'd expect, monitoring using printk is rather brittle for a number
>> of reasons -- most notably that the message might disappear entirely in
>> a new version of the kernel, or that the message may change in some way
>> that the regex or other classification methods start to silently fail.
>
>Another is that printk() is not reliable on its own. Messages might
>get lost. The size of the log buffer is limited. Deamon reading
>/dev/kmsg need not be scheduled in time or often enough. Console
>might be slow. The messages are filtered on the console by console_loglevel.

This is of course true. We don't use kmsg as the last line of defence for 
monitoring or remediation, of course, but it would be unwise to not have 
infrastructure capable of monitoring it. We often need to act quickly when 
production incidents happen, and often kmsg is the place where those 
"unexpected" issues are surfaced. It's often much more likely that there is 
some kmsg log which we can act on in those scenarios than anything else, and 
even if it's not ideal, in reality, it's typically reliable enough to at least 
mitigate the problem when dealing with a large fleet of machines :-)

>>     # Format: <module>,<facility><level><format>\0
>>     $ perl -p -e 's/\n/\\n/g;s/\0/\n/g' /proc/printk_formats | shuf -n 5
>>     vmlinux,6Disabling APIC timer\n
>>     intel_rapl_common,3intel_rapl_common: Cannot find matching power limit for constraint %d\n
>>     dm_crypt,3device-mapper: crypt: %s: INTEGRITY AEAD ERROR, sector %llu\n
>>     mac80211,6%s: AP bug: HT capability missing from AssocResp\n
>>     vmlinux,3zpool: couldn't create zpool - out of memory\n
>
>The facility and log level are not well separated from the format string.
>
>Also this is yet another style how the format is displayed. We already have
>
>	+ console/syslog: formated by record_print_text()
>	+ /dev/kmsg: formatted by info_print_ext_header(),  msg_print_ext_body().
>	+ /sys/kernel/debug/dynamic_debug/control
>	+ /sys/kernel/debug/tracing/printk_formats
>
>We should get some inspiration from the existing interfaces.

Sure, I'm not super bound to the format, as long as we have something that can 
aid those maintaining these systems which monitor printk in identifying that a 
format was mutated or removed. The module is more or less optional -- it's just 
intended as a hint about where to look.

>But we first should decide what information might be useful:
>
>   + 'facility' should not be needed. All messages should be from
>      kernel.

That's fair enough, it can be omitted. I just didn't want to stray too far from 
the netconsole format, since we already mostly have it in this format there.

My intention is to _not_ deviate from existing interfaces, really, so I'll be 
happy with any suggested format that will achieve this patch's stated goals, 
since this kind of data is sorely needed :-)

>   + <module> is already optinaly added by pr_fmt() to the printed strings
>     as:  pr_fmt(): ...

pr_fmts are not consistently used across the kernel, and sometimes differ from 
the module itself. Many modules don't use it at all, and we also don't have it 
for pr_cont. Just picking some random examples:

     % grep -av vmlinux /proc/printk_formats | shuf -n 10
     mac80211,6%s: mesh STA %pM switches to channel requiring DFS (%d MHz, width:%d, CF1/2: %d/%d MHz), aborting
     thinkpad_acpi,c N/Athinkpad_acpi,c %dthinkpad_acpi,5thinkpad_acpi: temperatures (Celsius):thinkpad_acpi,3thinkpad_acpi: Out of memory for LED data
     i915,6drm/i915 developers can then reassign to the right component if it's not a kernel issue.
     video,4[Firmware Bug]: _BCQ is used instead of _BQC
     i915,3gvt: requesting SMI service
     are MMIO SPTEs.
     i915,3gvt: invalid tiling mode: %x
     video,3ACPI: Create sysfs link
     cec,6cec-%s: duplicate logical address type
     soundwire_bus,3%s: %s: inconsistent state state %d

>> +static int proc_pf_show(struct seq_file *s, void *v)
>> +{
>> +	const struct printk_fmt_sec *ps = NULL;
>> +	const char **fptr = NULL;
>> +
>> +	mutex_lock(&printk_fmts_mutex);
>> +
>> +	list_for_each_entry(ps, &printk_fmts_list, list) {
>> +		const char *mod_name = ps_get_module_name(ps);
>> +
>> +		for (fptr = ps->start; fptr < ps->end; fptr++) {
>> +			seq_puts(s, mod_name);
>> +			seq_putc(s, ',');
>> +			seq_puts(s, *fptr);
>> +			seq_putc(s, '\0');
>> +		}
>
>You probably should get inspiration from t_show() in trace_printk.c.
>It handles newlines, ...
>
>Or by ddebug_proc_show(). It uses seq_escape().
>
>Anyway, there is something wrong at the moment. The output looks fine
>with cat. But "less" says that it is a binary format and the output
>is a bit messy:

Hmm, why should that be a problem? It's intentional that this pretty much just 
directly replicates the format string passed to printk, since it's easy to 
write a parser for it:

1. Go up to the comma, take the module
2. Take the facility and level
3. Take the rest up to a \0 as the format
4. Go to 1

I don't mind to have it escaped, but I'm not immediately seeing the benefit. We 
also don't escape `\0` in (for example) `/proc/pid/cmdline`, since it serves as 
a good natural delimiter.

Thanks for taking the time to review :-)

Chris

Re: [PATCH] printk: Userspace format enumeration support

[Joe Perches]

On Fri, 2021-02-05 at 22:25 +0000, Chris Down wrote:
> Petr Mladek writes:
> >   + <module> is already optinaly added by pr_fmt() to the printed strings
> >     as:  pr_fmt(): ...
> 
> pr_fmts are not consistently used across the kernel, and sometimes differ from 
> the module itself. Many modules don't use it at all, and we also don't have it 
> for pr_cont. Just picking some random examples:
> 
>      % grep -av vmlinux /proc/printk_formats | shuf -n 10
>      mac80211,6%s: mesh STA %pM switches to channel requiring DFS (%d MHz, width:%d, CF1/2: %d/%d MHz), aborting
>      thinkpad_acpi,c N/Athinkpad_acpi,c %dthinkpad_acpi,5thinkpad_acpi: temperatures (Celsius):thinkpad_acpi,3thinkpad_acpi: Out of memory for LED data

I don't understand this format.

"Out of memory for LED data" is a single printk ending with a '\n' newline 
I expected this to be broken up into multiple lines, one for each printk
that endsd in a newline.

And what would happen if the function was refactored removing the pr_cont
uses like the below: (basically, any output that uses a mechanism that
aggregates a buffer then emits it, and there are a _lot_ of those)

	printk("%s\n", buffer);

And there is already a relatively trivial way to do this using a modified
version of strings that looks for KERN_SOH[0-6], and if dynamic_debug is
enabled, look in the dynamic_debug section, either __verbose or __dyndbg
depending on the kernel version.

---
 drivers/platform/x86/thinkpad_acpi.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 18b390153e7f..ff1c09c600f8 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -6353,21 +6353,26 @@ static void thermal_dump_all_sensors(void)
 {
 	int n, i;
 	struct ibm_thermal_sensors_struct t;
+	char output[256];
+	int len = 0;
 
 	n = thermal_get_sensors(&t);
 	if (n <= 0)
 		return;
 
-	pr_notice("temperatures (Celsius):");
+	len += scnprintf(output + len, sizeof(output) - len,
+		       "temperatures (Celsius):");
 
 	for (i = 0; i < n; i++) {
-		if (t.temp[i] != TPACPI_THERMAL_SENSOR_NA)
-			pr_cont(" %d", (int)(t.temp[i] / 1000));
+		if (t.temp[i] == TPACPI_THERMAL_SENSOR_NA)
+			len += scnprintf(output + len, sizeof(output) - len,
+					 " N/A");
 		else
-			pr_cont(" N/A");
+			len += scnprintf(output + len, sizeof(output) - len,
+					 " %d", t.temp[i] / 1000);
 	}
 
-	pr_cont("\n");
+	pr_notice("%s\n", output);
 }
 
 /* sysfs temp##_input -------------------------------------------------- */

Re: [PATCH] printk: Userspace format enumeration support

[Chris Down]

Joe Perches writes:
>On Fri, 2021-02-05 at 22:25 +0000, Chris Down wrote:
>> Petr Mladek writes:
>> >   + <module> is already optinaly added by pr_fmt() to the printed strings
>> >     as:  pr_fmt(): ...
>>
>> pr_fmts are not consistently used across the kernel, and sometimes differ from
>> the module itself. Many modules don't use it at all, and we also don't have it
>> for pr_cont. Just picking some random examples:
>>
>>      % grep -av vmlinux /proc/printk_formats | shuf -n 10
>>      mac80211,6%s: mesh STA %pM switches to channel requiring DFS (%d MHz, width:%d, CF1/2: %d/%d MHz), aborting
>>      thinkpad_acpi,c N/Athinkpad_acpi,c %dthinkpad_acpi,5thinkpad_acpi: temperatures (Celsius):thinkpad_acpi,3thinkpad_acpi: Out of memory for LED data
>
>I don't understand this format.
>
>"Out of memory for LED data" is a single printk ending with a '\n' newline
>I expected this to be broken up into multiple lines, one for each printk
>that endsd in a newline.

Hmm, that's just a manifestation of directly using `shuf` without doing the 
transformation of trailing nulls to newlines shown in the changelog. They are 
still distinct and separated by nulls.

>And what would happen if the function was refactored removing the pr_cont
>uses like the below: (basically, any output that uses a mechanism that
>aggregates a buffer then emits it, and there are a _lot_ of those)
>
>	printk("%s\n", buffer);

There are certainly printks which can't be trivially monitored using the printk 
format alone, but the vast majority of the ones that are monitored _do_ have 
meaningful formats and can be monitored over time. No solution to this is going 
to catch every single case, especially when so much of the information can be 
generated dyamically, but this patchset still goes a long way to making printk 
monitoring more tractable for use cases like the one described in the 
changelog.

Re: [PATCH] printk: Userspace format enumeration support

[Joe Perches]

On Sat, 2021-02-06 at 21:21 +0000, Chris Down wrote:
> Joe Perches writes:
> > On Fri, 2021-02-05 at 22:25 +0000, Chris Down wrote:
> > > Petr Mladek writes:
> > > >   + <module> is already optinaly added by pr_fmt() to the printed strings
> > > >     as:  pr_fmt(): ...
> > > 
> > > pr_fmts are not consistently used across the kernel, and sometimes differ from
> > > the module itself. Many modules don't use it at all, and we also don't have it
> > > for pr_cont. Just picking some random examples:
> > > 
> > >      % grep -av vmlinux /proc/printk_formats | shuf -n 10
> > >      mac80211,6%s: mesh STA %pM switches to channel requiring DFS (%d MHz, width:%d, CF1/2: %d/%d MHz), aborting
> > >      thinkpad_acpi,c N/Athinkpad_acpi,c %dthinkpad_acpi,5thinkpad_acpi: temperatures (Celsius):thinkpad_acpi,3thinkpad_acpi: Out of memory for LED data
> > 
> > I don't understand this format.
> > 
> > "Out of memory for LED data" is a single printk ending with a '\n' newline
> > I expected this to be broken up into multiple lines, one for each printk
> > that endsd in a newline.
> 
> Hmm, that's just a manifestation of directly using `shuf` without doing the 
> transformation of trailing nulls to newlines shown in the changelog. They are 
> still distinct and separated by nulls.
> 
> > And what would happen if the function was refactored removing the pr_cont
> > uses like the below: (basically, any output that uses a mechanism that
> > aggregates a buffer then emits it, and there are a _lot_ of those)
> > 
> > 	printk("%s\n", buffer);
> 
> There are certainly printks which can't be trivially monitored using the printk 
> format alone, but the vast majority of the ones that are monitored _do_ have 
> meaningful formats and can be monitored over time. No solution to this is going 
> to catch every single case, especially when so much of the information can be 
> generated dyamically, but this patchset still goes a long way to making printk 
> monitoring more tractable for use cases like the one described in the 
> changelog.

For the _vast_ majority of printk strings, this can easily be found
and compared using a trivial modification to strings.

Module specific formats are stored in the .ko files and could be
examined separately.

Here's the possible patch to strings:

---
 binutils/strings.c | 98 +++++++++++++++++++++++++++++++++++++++++++++---------
 1 file changed, 82 insertions(+), 16 deletions(-)

diff --git a/binutils/strings.c b/binutils/strings.c
index 3444fbc7222..d4abeb0cdbb 100644
--- a/binutils/strings.c
+++ b/binutils/strings.c
@@ -26,6 +26,10 @@
    --data
    -d		Scan only the initialized data section(s) of object files.
 
+   --section=<section>
+   -S <section> Scan only the specific section(s)
+   --kernel
+   -k		Scan only linux-kernel KERN_SOH strings
    --print-file-name
    -f		Print the name of the file before each string.
 
@@ -108,6 +112,14 @@ static bfd_boolean print_filenames;
 /* TRUE means for object files scan only the data section.  */
 static bfd_boolean datasection_only;
 
+/* TRUE means for object files scan only the specified sections.  */
+static bfd_boolean specified_sections_only;
+static int specified_sections_count;
+static char **specified_sections;
+
+/* TRUE means scan only linux-kernel printk strings with KERN_SOH.  */
+static bfd_boolean linux_kernel_soh;
+
 /* The BFD object file format.  */
 static char *target;
 
@@ -122,6 +134,8 @@ static struct option long_options[] =
 {
   {"all", no_argument, NULL, 'a'},
   {"data", no_argument, NULL, 'd'},
+  {"section", required_argument, NULL, 'S'},
+  {"kernel", no_argument, NULL, 'k'},
   {"print-file-name", no_argument, NULL, 'f'},
   {"bytes", required_argument, NULL, 'n'},
   {"radix", required_argument, NULL, 't'},
@@ -173,7 +187,7 @@ main (int argc, char **argv)
   encoding = 's';
   output_separator = NULL;
 
-  while ((optc = getopt_long (argc, argv, "adfhHn:wot:e:T:s:Vv0123456789",
+  while ((optc = getopt_long (argc, argv, "adS:s:kfhHn:wot:e:T:s:Vv0123456789",
 			      long_options, (int *) 0)) != EOF)
     {
       switch (optc)
@@ -186,6 +200,17 @@ main (int argc, char **argv)
 	  datasection_only = TRUE;
 	  break;
 
+	case 'S':
+	  specified_sections_only = TRUE;
+	  specified_sections = xrealloc(specified_sections,
+					(specified_sections_count + 1) * sizeof(const char *));
+	  specified_sections[specified_sections_count++] = optarg;
+	  break;
+
+	case 'k':
+	  linux_kernel_soh = TRUE;
+	  break;
+
 	case 'f':
 	  print_filenames = TRUE;
 	  break;
@@ -318,6 +343,19 @@ main (int argc, char **argv)
   return (exit_status);
 }
 \f
+static bfd_boolean
+section_is_specified_section (asection *sect)
+{
+  int i;
+  for (i = 0; i < specified_sections_count; i++)
+    {
+      if (strcmp(specified_sections[i], sect->name) == 0) {
+	return TRUE;
+    }
+  }
+  return FALSE;
+}
+
 /* Scan section SECT of the file ABFD, whose printable name is
    FILENAME.  If it contains initialized data set GOT_A_SECTION and
    print the strings in it.  */
@@ -329,7 +367,9 @@ strings_a_section (bfd *abfd, asection *sect, const char *filename,
   bfd_size_type sectsize;
   bfd_byte *mem;
 
-  if ((sect->flags & DATA_FLAGS) != DATA_FLAGS)
+  if (specified_sections_only && !section_is_specified_section (sect))
+    return;
+  if (datasection_only && ((sect->flags & DATA_FLAGS) != DATA_FLAGS))
     return;
 
   sectsize = bfd_section_size (sect);
@@ -417,7 +457,7 @@ strings_file (char *file)
      try to open it as an object file and only look at
      initialized data sections.  If that fails, fall back to the
      whole file.  */
-  if (!datasection_only || !strings_object_file (file))
+  if (!(datasection_only || specified_sections_only) || !strings_object_file (file))
     {
       FILE *stream;
 
@@ -571,6 +611,7 @@ print_strings (const char *filename, FILE *stream, file_ptr address,
 	       int stop_point, int magiccount, char *magic)
 {
   char *buf = (char *) xmalloc (sizeof (char) * (string_min + 1));
+  int is_kernel = 0;
 
   while (1)
     {
@@ -594,6 +635,7 @@ print_strings (const char *filename, FILE *stream, file_ptr address,
 
 	  if (! STRING_ISGRAPHIC (c))
 	    {
+	      is_kernel = c == 1;
 	      /* Found a non-graphic.  Try again starting with next byte.  */
 	      unget_part_char (c, &address, &magiccount, &magic);
 	      goto tryline;
@@ -601,6 +643,22 @@ print_strings (const char *filename, FILE *stream, file_ptr address,
 	  buf[i] = c;
 	}
 
+      if ((linux_kernel_soh && !is_kernel) ||
+	  (linux_kernel_soh && !strchr("01234567cd", buf[0])))
+	{
+	  while (1) {
+	    c = get_char (stream, &address, &magiccount, &magic);
+	    if (c == EOF)
+	      return;
+	    if (! STRING_ISGRAPHIC (c))
+	      {
+	        unget_part_char (c, &address, &magiccount, &magic);
+	        break;
+	      }
+	    }
+	goto tryline;
+	}
+
       /* We found a run of `string_min' graphic characters.  Print up
 	 to the next non-graphic character.  */
 
@@ -668,8 +726,11 @@ print_strings (const char *filename, FILE *stream, file_ptr address,
 	    break;
 	  }
 
-      buf[i] = '\0';
-      fputs (buf, stdout);
+      if (!linux_kernel_soh || is_kernel)
+        {
+	  buf[i] = '\0';
+	  fputs (buf, stdout);
+        }
 
       while (1)
 	{
@@ -681,13 +742,20 @@ print_strings (const char *filename, FILE *stream, file_ptr address,
 	      unget_part_char (c, &address, &magiccount, &magic);
 	      break;
 	    }
-	  putchar (c);
+	  if (!linux_kernel_soh || is_kernel)
+	    {
+	      putchar (c);
+	    }
 	}
 
-      if (output_separator)
-	fputs (output_separator, stdout);
-      else
-	putchar ('\n');
+      if (!linux_kernel_soh || is_kernel)
+	{
+          if (output_separator)
+	    fputs (output_separator, stdout);
+	  else
+	    putchar ('\n');
+	}
+      is_kernel = 0;
     }
   free (buf);
 }
@@ -702,13 +770,11 @@ usage (FILE *stream, int status)
   if (DEFAULT_STRINGS_ALL)
     fprintf (stream, _("\
   -a - --all                Scan the entire file, not just the data section [default]\n\
-  -d --data                 Only scan the data sections in the file\n"));
-  else
-    fprintf (stream, _("\
+  -d --data                 Only scan the data sections in the file\n\
+  -S --section=[section]    Only scan the specific sections\n\
+  -k --kernel               Only scan for linux-kernel strings with KERN_SOH\n\
   -a - --all                Scan the entire file, not just the data section\n\
-  -d --data                 Only scan the data sections in the file [default]\n"));
-
-  fprintf (stream, _("\
+  -d --data                 Only scan the data sections in the file [default]\n\
   -f --print-file-name      Print the name of the file before each string\n\
   -n --bytes=[number]       Locate & print any NUL-terminated sequence of at\n\
   -<number>                   least [number] characters (default 4).\n\

Re: [PATCH] printk: Userspace format enumeration support

[Chris Down]

Joe Perches writes:
>> There are certainly printks which can't be trivially monitored using the printk
>> format alone, but the vast majority of the ones that are monitored _do_ have
>> meaningful formats and can be monitored over time. No solution to this is going
>> to catch every single case, especially when so much of the information can be
>> generated dyamically, but this patchset still goes a long way to making printk
>> monitoring more tractable for use cases like the one described in the
>> changelog.
>
>For the _vast_ majority of printk strings, this can easily be found
>and compared using a trivial modification to strings.

There are several issues with your proposed approach that make it unsuitable 
for use as part of a reliable production environment:

1. It misses printk() formats without KERN_SOH

printk() formats without KERN_SOH are legal and use MESSAGE_LOGLEVEL_DEFAULT.  
On my test kernel, your proposed patch loses >5% of printk formats -- over 200 
messages -- due to this, including critical ones like those about hardware or 
other errors.

2. Users don't always have the kernel image available

Many of our machines and many of the machines of others like us do not boot 
using local storage, but instead use PXE or other technologies where the kernel 
may not be stored during runtime.

As is described in the changelog, it is necessary to be able to vary 
remediations not only based on what is already in /dev/kmsg, but also to be 
able to make decisions about our methodology based on what's _supported_ in the 
running kernel at runtime, and your proposed approach makes this not viable.

3. `KERN_SOH + level' can appear in other places than just printk strings

KERN_SOH is just ASCII '\001' -- it's not distinctive or unique, even when 
paired with a check for something that looks like a level after it. For this 
reason, your proposed patch results in a non-trivial amount of non-printk 
related garbage in its output. For example:

     % binutils/strings -k /tmp/vmlinux | head -5
     3L)s
     3L)s
     c,[]A\
     c(L)c
     d$pL)d$`u4

Fundamentally, one cannot use a tool which just determines whether something is 
printable to determine semantic intent.

4. strings(1) output cannot differentiate embedded newlines and new formats

The following has exactly the same output from strings(1), but will manifest 
completely differently at printk() time:

     printk(KERN_ERR "line one\nline two\nline three\n");
     printk("line four\n");

With strings, the hypothetical output would be:*

     3line one\nline two\nline three\nline four\n

* "line four\n" would also be missing with your current -k check.

But this makes it impossible to distinguish between this, compared to:

     printk(KERN_ERR "line one\nline two\n");
     printk("line three\n");
     printk("line four\n");

The originally posted patch _does_ differentiate between these cases, using \0 
as a reliable separator. Its outputs are, respectively:

     \0013line one\nline two\nline three\0\nline four\n\0
     \0013line one\nline two\n\0line three\nline four\n\0

This isn't just a theoretical concern -- there are plenty of places which use 
multiline printks, and we must be able to distinguish between that and 
_multiple_ printks. Not being able to differentiate cases like these would 
dramatically reduce the effectiveness of printk enumeration, as we can no 
longer ascertain which formats will always be used together (for example, in 
the case of sequences of printks guarded by conditionals, which are all over 
the place).

5. strings(1) is not contextually aware, and cannot be made to act as if it is

strings has no idea about what it is reading, which is why it is more than 
happy to output the kind of meaningless output shown in #3. There are plenty of 
places across the kernel where there might be a sequence of bytes which the 
strings utility happens to interpret as being semantically meaningful, but in 
reality just happens to be an unrelated sequence of coincidentally printable 
bytes that just happens to contain a \001.

I appreciate your willingness to propose other solutions, but for these 
reasons, the proposed strings(1) patch would not suffice as an interface for 
printk enumeration.

Re: [PATCH] printk: Userspace format enumeration support

[Joe Perches]

On Sun, 2021-02-07 at 14:13 +0000, Chris Down wrote:
> Joe Perches writes:
> > > There are certainly printks which can't be trivially monitored using the printk
> > > format alone, but the vast majority of the ones that are monitored _do_ have
> > > meaningful formats and can be monitored over time. No solution to this is going
> > > to catch every single case, especially when so much of the information can be
> > > generated dyamically, but this patchset still goes a long way to making printk
> > > monitoring more tractable for use cases like the one described in the
> > > changelog.
> > 
> > For the _vast_ majority of printk strings, this can easily be found
> > and compared using a trivial modification to strings.
> 
> There are several issues with your proposed approach that make it unsuitable 
> for use as part of a reliable production environment:
> 
> 1. It misses printk() formats without KERN_SOH
> 
> printk() formats without KERN_SOH are legal and use MESSAGE_LOGLEVEL_DEFAULT.  
> On my test kernel, your proposed patch loses >5% of printk formats -- over 200 
> messages -- due to this, including critical ones like those about hardware or 
> other errors.

There are _very_ few of those printks without KERN_<level> and those
very few are not generally being changed.

> 2. Users don't always have the kernel image available
> 
> Many of our machines and many of the machines of others like us do not boot 
> using local storage, but instead use PXE or other technologies where the kernel 
> may not be stored during runtime.
> 
> As is described in the changelog, it is necessary to be able to vary 
> remediations not only based on what is already in /dev/kmsg, but also to be 
> able to make decisions about our methodology based on what's _supported_ in the 
> running kernel at runtime, and your proposed approach makes this not viable.

Indirection would alway work.

You could load a separate file with output strings along with your
kernel image.

> 3. `KERN_SOH + level' can appear in other places than just printk strings
> 
> KERN_SOH is just ASCII '\001' -- it's not distinctive or unique, even when 
> paired with a check for something that looks like a level after it. For this 
> reason, your proposed patch results in a non-trivial amount of non-printk 
> related garbage in its output. For example:
> 
>      % binutils/strings -k /tmp/vmlinux | head -5
>      3L)s
>      3L)s
>      c,[]A\
>      c(L)c
>      d$pL)d$`u4
> 
> Fundamentally, one cannot use a tool which just determines whether something is 
> printable to determine semantic intent.

$ kernel_strings --kernel --section ".rodata" vmlinux

I got exactly 0.

> 4. strings(1) output cannot differentiate embedded newlines and new formats
> 
> The following has exactly the same output from strings(1), but will manifest 
> completely differently at printk() time:
> 
>      printk(KERN_ERR "line one\nline two\nline three\n");
>      printk("line four\n");

This is not the preferred output style and is only done in old and
unchanging code.

Your use case in your commit log is looking for _changed_ formats.

On Thu, 2021-02-04 at 15:37 +0000, Chris Down wrote:
> This patch provides a solution to the issue of silently changed or
> deleted printks:

Exactly _how_ many of these use cases do you think exist?

The generally preferred style for the example above would be:

	pr_err("line one\n");
	pr_err("line two\n");
	pr_err("line three\n");
	pr_err("line four\n");

> The originally posted patch _does_ differentiate between these cases, using \0 
> as a reliable separator. Its outputs are, respectively:
> 
>      \0013line one\nline two\nline three\0\nline four\n\0
>      \0013line one\nline two\n\0line three\nline four\n\0
> 
> This isn't just a theoretical concern -- there are plenty of places which use 
> multiline printks, and we must be able to distinguish between that and 
> _multiple_ printks.

Just like there are many places that use buffered printks as the
example I gave earlier.  None of which your proposed solution would find.

> 5. strings(1) is not contextually aware, and cannot be made to act as if it is
> 
> strings has no idea about what it is reading, which is why it is more than 
> happy to output the kind of meaningless output shown in #3. There are plenty of 
> places across the kernel where there might be a sequence of bytes which the 
> strings utility happens to interpret as being semantically meaningful, but in 
> reality just happens to be an unrelated sequence of coincidentally printable 
> bytes that just happens to contain a \001.
> 
> I appreciate your willingness to propose other solutions, but for these 
> reasons, the proposed strings(1) patch would not suffice as an interface for 
> printk enumeration.

I think you are on a path to try to make printk output immutable.
I think that's a _very_ bad path.

I also think this is adding needless complexity.

A possible complexity I would like to support would be optionally
compressing printk format strings at compile time and uncompressing
them at use time.

Re: [PATCH] printk: Userspace format enumeration support

[Chris Down]

Joe Perches writes:
>> There are several issues with your proposed approach that make it unsuitable
>> for use as part of a reliable production environment:
>>
>> 1. It misses printk() formats without KERN_SOH
>>
>> printk() formats without KERN_SOH are legal and use MESSAGE_LOGLEVEL_DEFAULT.
>> On my test kernel, your proposed patch loses >5% of printk formats -- over 200
>> messages -- due to this, including critical ones like those about hardware or
>> other errors.
>
>There are _very_ few of those printks without KERN_<level> and those
>very few are not generally being changed.

I already specified how many are lost: 5%. That's not "very few". That's a huge 
proportion of the coverage afforded by this patch, including several important 
cases.

Relying on "they generally don't change" is not a recipe for reliability or 
success (and they do change, more data on that below).

>> 2. Users don't always have the kernel image available
>>
>> Many of our machines and many of the machines of others like us do not boot
>> using local storage, but instead use PXE or other technologies where the kernel
>> may not be stored during runtime.
>>
>> As is described in the changelog, it is necessary to be able to vary
>> remediations not only based on what is already in /dev/kmsg, but also to be
>> able to make decisions about our methodology based on what's _supported_ in the
>> running kernel at runtime, and your proposed approach makes this not viable.
>
>Indirection would alway work.
>
>You could load a separate file with output strings along with your
>kernel image.

You're moving the goalposts quite quickly here, which makes it harder to reply 
to your points. Now you're proposing an entirely separate distribution path, 
compared to interfaces that we already have precedent for in the kernel (eg.  
trace_printk). That requires a strong justification, and I'm not seeing one 
here.

>> 3. `KERN_SOH + level' can appear in other places than just printk strings
>>
>> KERN_SOH is just ASCII '\001' -- it's not distinctive or unique, even when
>> paired with a check for something that looks like a level after it. For this
>> reason, your proposed patch results in a non-trivial amount of non-printk
>> related garbage in its output. For example:
>>
>>      % binutils/strings -k /tmp/vmlinux | head -5
>>      3L)s
>>      3L)s
>>      c,[]A\
>>      c(L)c
>>      d$pL)d$`u4
>>
>> Fundamentally, one cannot use a tool which just determines whether something is
>> printable to determine semantic intent.
>
>$ kernel_strings --kernel --section ".rodata" vmlinux
>
>I got exactly 0.

"It works on my computer" is not a valid testing methodology, especially for 
something as complex as the Linux kernel. It's especially not a valid rebuttal 
to someone demonstrating that it clearly doesn't work on theirs.

Even filtering to the .rodata section, there's plenty of garbage just in the 
first five cases:

     % binutils/strings --kernel --section ".rodata" /tmp/vmlinux | head -5
     3******* Your BIOS seems to not contain a fix for K8 errata #93
     1>pBC)
     dTRAC
     6Run %s as init process
     7calling  %pS @ %i

Clearly there are cases that you are not considering. My kernel config is 
attached if you want to try and replicate, but regardless, it's really not 
valid to say "it works for me" in response to someone showing that it doesn't.

>> 4. strings(1) output cannot differentiate embedded newlines and new formats
>>
>> The following has exactly the same output from strings(1), but will manifest
>> completely differently at printk() time:
>>
>>      printk(KERN_ERR "line one\nline two\nline three\n");
>>      printk("line four\n");
>
>This is not the preferred output style and is only done in old and
>unchanging code.
>
>Your use case in your commit log is looking for _changed_ formats.

Joe, it's fine to present alternatives to people's patches, but please do your 
research before spouting things like this. It's a waste of everyone's time to 
refute things which are so easily demonstrated to be false.

Here are a bunch of recent changes to printk I found just from literally 2 
minutes of looking through `git log`:

- ea34f78f3df6: 2020, printk site deleted (which of course we also need to know.)
- a0f6d924cada: 2020, new callsite. the level is printed dynamically, so your proposed patch would not match.
- bf13718bc57a: 2020, existing printk changed. 
- 994388f228c6: 2020, printk site changed to au0828_isocdbg, reworded entirely.
- a8b62fd08505: 2020, new callsite, dynamic level.

I could find literally pages and pages of these just from the last few years.  
Your belief that these printks are only in "unchanging" code does not match 
reality.

>On Thu, 2021-02-04 at 15:37 +0000, Chris Down wrote:
>> This patch provides a solution to the issue of silently changed or
>> deleted printks:
>
>Exactly _how_ many of these use cases do you think exist?
>
>The generally preferred style for the example above would be:
>
>	pr_err("line one\n");
>	pr_err("line two\n");
>	pr_err("line three\n");
>	pr_err("line four\n");

I have no idea why you think this is so rare -- we have mixed pr_* and 
unadorned printk() all over the codebase. A number of the patches I just gave 
above are in files with mixed calls.

>> The originally posted patch _does_ differentiate between these cases, using \0
>> as a reliable separator. Its outputs are, respectively:
>>
>>      \0013line one\nline two\nline three\0\nline four\n\0
>>      \0013line one\nline two\n\0line three\nline four\n\0
>>
>> This isn't just a theoretical concern -- there are plenty of places which use
>> multiline printks, and we must be able to distinguish between that and
>> _multiple_ printks.
>
>Just like there are many places that use buffered printks as the
>example I gave earlier.  None of which your proposed solution would find.

There are always going to be cases which are not caught. The point is that the 
patch proposed in this thread captures significantly more cases than the 
`strings` case (not to mention that it avoids outputting garbage from .rodata), 
not that it covers every imaginable scenario.

>> 5. strings(1) is not contextually aware, and cannot be made to act as if it is
>>
>> strings has no idea about what it is reading, which is why it is more than
>> happy to output the kind of meaningless output shown in #3. There are plenty of
>> places across the kernel where there might be a sequence of bytes which the
>> strings utility happens to interpret as being semantically meaningful, but in
>> reality just happens to be an unrelated sequence of coincidentally printable
>> bytes that just happens to contain a \001.
>>
>> I appreciate your willingness to propose other solutions, but for these
>> reasons, the proposed strings(1) patch would not suffice as an interface for
>> printk enumeration.
>
>I think you are on a path to try to make printk output immutable.
>I think that's a _very_ bad path.

That's literally the opposite of what this patchset does. This patchset 
offloads the responsibility of worrying about userspace parsers breaking 
because of changes to kernel printks, because those userspace parsers and 
maintainers now have a mechanism to detect changes. If anything, it _reduces_ 
the risk of what you're describing.

Re: [PATCH] printk: Userspace format enumeration support

[Chris Down]

[-- Attachment #1: Type: text/plain, Size: 1525 bytes --]

Chris Down writes:
>>>3. `KERN_SOH + level' can appear in other places than just printk strings
>>>
>>>KERN_SOH is just ASCII '\001' -- it's not distinctive or unique, even when
>>>paired with a check for something that looks like a level after it. For this
>>>reason, your proposed patch results in a non-trivial amount of non-printk
>>>related garbage in its output. For example:
>>>
>>>     % binutils/strings -k /tmp/vmlinux | head -5
>>>     3L)s
>>>     3L)s
>>>     c,[]A\
>>>     c(L)c
>>>     d$pL)d$`u4
>>>
>>>Fundamentally, one cannot use a tool which just determines whether something is
>>>printable to determine semantic intent.
>>
>>$ kernel_strings --kernel --section ".rodata" vmlinux
>>
>>I got exactly 0.
>
>"It works on my computer" is not a valid testing methodology, 
>especially for something as complex as the Linux kernel. It's 
>especially not a valid rebuttal to someone demonstrating that it 
>clearly doesn't work on theirs.
>
>Even filtering to the .rodata section, there's plenty of garbage just 
>in the first five cases:
>
>    % binutils/strings --kernel --section ".rodata" /tmp/vmlinux | head -5
>    3******* Your BIOS seems to not contain a fix for K8 errata #93
>    1>pBC)
>    dTRAC
>    6Run %s as init process
>    7calling  %pS @ %i
>
>Clearly there are cases that you are not considering. My kernel config 
>is attached if you want to try and replicate, but regardless, it's 
>really not valid to say "it works for me" in response to someone 
>showing that it doesn't.

Attached.

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 68031 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 5.11.0-rc4-mm1 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="gcc (GCC) 10.2.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=100200
CONFIG_LD_VERSION=235010000
CONFIG_CLANG_VERSION=0
CONFIG_LLD_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_CAN_LINK_STATIC=y
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_ZSTD=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
# CONFIG_KERNEL_ZSTD is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_WATCH_QUEUE is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
# CONFIG_USELIB is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem

CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem

# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_PSI=y
# CONFIG_PSI_DEFAULT_DISABLED is not set
# end of CPU/Task time and stats accounting

# CONFIG_CPU_ISOLATION is not set

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem

CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y

#
# Scheduler features
#
# CONFIG_UCLAMP_TASK is not set
# end of Scheduler features

CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_HAS_INT128=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_KMEM=y
# CONFIG_BLK_CGROUP is not set
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUP_PIDS is not set
# CONFIG_CGROUP_RDMA is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_BPF=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_TIME_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_BOOT_CONFIG is not set
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_BPF_SYSCALL=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y
# CONFIG_BPF_PRELOAD is not set
# CONFIG_USERFAULTFD is not set
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_RSEQ=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters

CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
# end of General setup

CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_FILTER_PGPROT=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_KASAN_SHADOW_OFFSET=0xdffffc0000000000
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
# CONFIG_RETPOLINE is not set
# CONFIG_X86_CPU_RESCTRL is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
# CONFIG_IOSF_MBI is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_HYPERVISOR_GUEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_IA32_FEAT_CTL=y
CONFIG_X86_VMX_FEATURE_NAMES=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_ZHAOXIN=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS_RANGE_BEGIN=2
CONFIG_NR_CPUS_RANGE_END=512
CONFIG_NR_CPUS_DEFAULT=64
CONFIG_NR_CPUS=64
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
# CONFIG_X86_MCE is not set

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=y
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
# CONFIG_PERF_EVENTS_AMD_POWER is not set
# end of Performance monitoring

CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
# CONFIG_X86_IOPL_IOPERM is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_X86_5LEVEL is not set
CONFIG_X86_DIRECT_GBPAGES=y
# CONFIG_X86_CPA_STATISTICS is not set
# CONFIG_AMD_MEM_ENCRYPT is not set
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
# CONFIG_X86_PMEM_LEGACY is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
CONFIG_X86_UMIP=y
# CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS is not set
CONFIG_X86_INTEL_TSX_MODE_OFF=y
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
# CONFIG_X86_SGX is not set
# CONFIG_EFI is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_KEXEC_FILE is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_XONLY is not set
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_HAVE_LIVEPATCH=y
# end of Processor type and features

CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y

#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
# CONFIG_PM is not set
# CONFIG_ENERGY_MODEL is not set
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SPCR_TABLE=y
CONFIG_ACPI_LPIT=y
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
# CONFIG_ACPI_EC_DEBUGFS is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
# CONFIG_ACPI_FAN is not set
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_CPPC_LIB=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
# CONFIG_ACPI_THERMAL is not set
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_NFIT is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
# CONFIG_ACPI_DPTF is not set
# CONFIG_ACPI_CONFIGFS is not set
# CONFIG_PMIC_OPREGION is not set
CONFIG_X86_PM_TIMER=y
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y

#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
# CONFIG_X86_PCC_CPUFREQ is not set
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=y

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
# end of CPU Frequency scaling

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_CPU_IDLE_GOV_TEO is not set
# end of CPU Idle

# CONFIG_INTEL_IDLE is not set
# end of Power management and ACPI options

#
# Bus options (PCI etc.)
#
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_MMCONF_FAM10H=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# CONFIG_X86_SYSFB is not set
# end of Bus options (PCI etc.)

#
# Binary Emulations
#
CONFIG_IA32_EMULATION=y
# CONFIG_X86_X32 is not set
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
# end of Binary Emulations

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DMIID is not set
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
CONFIG_AS_AVX512=y
CONFIG_AS_SHA1_NI=y
CONFIG_AS_SHA256_NI=y
CONFIG_AS_TPAUSE=y

#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_HOTPLUG_SMT=y
CONFIG_GENERIC_ENTRY=y
# CONFIG_JUMP_LABEL is not set
# CONFIG_STATIC_CALL_SELFTEST is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
# CONFIG_SECCOMP is not set
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_CONTEXT_TRACKING_OFFSTACK=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_HAVE_STATIC_CALL=y
CONFIG_HAVE_STATIC_CALL_INLINE=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_HAS_ELFCORE_COMPAT=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling

CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
# CONFIG_BLK_WBT is not set
# CONFIG_BLK_DEBUG_FS is not set
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
# end of Partition Types

CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
# CONFIG_MQ_IOSCHED_KYBER is not set
# CONFIG_IOSCHED_BFQ is not set
# end of IO Schedulers

CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
# end of Executable file formats

#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
# CONFIG_PAGE_REPORTING is not set
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_THP_SWAP=y
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_AREAS=7
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
# CONFIG_ZSMALLOC is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_PTE_DEVMAP=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
# CONFIG_READ_ONLY_THP_FOR_FS is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_SECRETMEM=y
# end of Memory Management options

CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_TLS is not set
# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
# CONFIG_XDP_SOCKETS is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=y
# CONFIG_SYN_COOKIES is not set
# CONFIG_NET_IPVTI is not set
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_INET_RAW_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_MPTCP is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
CONFIG_HAVE_NET_DSA=y
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_QRTR is not set
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
# CONFIG_CGROUP_NET_CLASSID is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_STREAM_PARSER is not set
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
# end of Network testing
# end of Networking options

# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
# CONFIG_FAILOVER is not set
CONFIG_ETHTOOL_NETLINK=y
CONFIG_HAVE_EBPF_JIT=y

#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
# CONFIG_PCI_PF_STUB is not set
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_LABEL=y
# CONFIG_HOTPLUG_PCI is not set

#
# PCI controller drivers
#
# CONFIG_VMD is not set

#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT_HOST is not set
# CONFIG_PCI_MESON is not set
# end of DesignWare PCI Core Support

#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support

#
# Cadence PCIe controllers support
#
# end of Cadence PCIe controllers support
# end of PCI controller drivers

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint

#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers

# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set

#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
# CONFIG_FW_LOADER_COMPRESS is not set
# end of Firmware loader

CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
# end of Generic Driver Options

#
# Bus devices
#
# CONFIG_MHI_BUS is not set
# end of Bus devices

# CONFIG_CONNECTOR is not set
# CONFIG_GNSS is not set
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_FD is not set
CONFIG_CDROM=y
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SKD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set

#
# NVME Support
#
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_NVME_FC is not set
# end of NVME Support

#
# Misc devices
#
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_SRAM is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
# CONFIG_PVPANIC is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
# end of EEPROM support

# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline

#
# Altera FPGA firmware download module (requires I2C)
#
# CONFIG_INTEL_MEI is not set
# CONFIG_INTEL_MEI_ME is not set
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_VMWARE_VMCI is not set
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_HABANA_AI is not set
# end of Misc devices

CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# end of SCSI Transports

# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# end of SCSI device support

CONFIG_ATA=y
CONFIG_SATA_HOST=y
CONFIG_PATA_TIMINGS=y
# CONFIG_ATA_VERBOSE_ERROR is not set
CONFIG_ATA_FORCE=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_PMP is not set

#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support

# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_WIREGUARD is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_TUN is not set
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set

#
# Distributed Switch Architecture drivers
#
# end of Distributed Switch Architecture drivers

CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_AGERE is not set
# CONFIG_NET_VENDOR_ALACRITECH is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
# CONFIG_NET_VENDOR_AMAZON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_AQUANTIA is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_AURORA is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_VENDOR_CADENCE is not set
# CONFIG_NET_VENDOR_CAVIUM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_NET_VENDOR_CORTINA is not set
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
# CONFIG_NET_VENDOR_GOOGLE is not set
# CONFIG_NET_VENDOR_HUAWEI is not set
# CONFIG_NET_VENDOR_I825XX is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
# CONFIG_E1000E is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_I40E is not set
# CONFIG_I40EVF is not set
# CONFIG_ICE is not set
# CONFIG_FM10K is not set
# CONFIG_IGC is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_MICROSEMI is not set
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NETERION is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
# CONFIG_NET_VENDOR_NI is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_PACKET_ENGINES is not set
# CONFIG_NET_VENDOR_PENSANDO is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_REALTEK is not set
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SOLARFLARE is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_SOCIONEXT is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_NET_VENDOR_XILINX is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_PHYLIB is not set
# CONFIG_MDIO_DEVICE is not set

#
# PCS device drivers
#
# end of PCS device drivers

# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Host-side USB support is needed for USB Network Adapter support
#
# CONFIG_WLAN is not set
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_NETDEVSIM is not set
# CONFIG_NET_FAILOVER is not set
# CONFIG_ISDN is not set
# CONFIG_NVM is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_SPARSEKMAP=y
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_KEYBOARD_OPENCORES=y
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_SERIO_ALTERA_PS2=y
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_USERIO is not set
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
CONFIG_GAMEPORT_FM801=y
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_LDISC_AUTOLOAD=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_DWLIB=y
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_LANTIQ is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_BCM63XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_SPRD is not set
# end of Serial drivers

# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
# CONFIG_NULL_TTY is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_VIRTIO_CONSOLE is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_DEVPORT=y
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
# CONFIG_XILLYBUS is not set
# end of Character devices

# CONFIG_RANDOM_TRUST_CPU is not set
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set

#
# I2C support
#
# CONFIG_I2C is not set
# end of I2C support

# CONFIG_I3C is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
# CONFIG_PPS is not set

#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support

# CONFIG_PINCTRL is not set
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_NETLINK is not set
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
# CONFIG_THERMAL_WRITABLE_TRIPS is not set
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
# CONFIG_THERMAL_GOV_USER_SPACE is not set
# CONFIG_THERMAL_EMULATION is not set

#
# Intel thermal drivers
#
# CONFIG_INTEL_POWERCLAMP is not set
# CONFIG_INTEL_SOC_DTS_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# end of ACPI INT340X thermal drivers

# CONFIG_INTEL_PCH_THERMAL is not set
# end of Intel thermal drivers

# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_MADERA is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_INTEL_PMT is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_VX855 is not set
# end of Multifunction device drivers

# CONFIG_REGULATOR is not set
# CONFIG_RC_CORE is not set
# CONFIG_MEDIA_CEC_SUPPORT is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
# CONFIG_DRM is not set

#
# ARM devices
#
# end of ARM devices

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_QCOM_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# end of Backlight & LCD device support

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
# end of Console display driver support

CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# end of Graphics support

# CONFIG_SOUND is not set

#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
# CONFIG_HID_CMEDIA is not set
CONFIG_HID_CYPRESS=y
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_GLORIOUS is not set
# CONFIG_HID_VIVALDI is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
CONFIG_HID_ITE=y
# CONFIG_HID_JABRA is not set
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
CONFIG_HID_REDRAGON=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTI is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
CONFIG_HID_PLANTRONICS=y
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEAM is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set
# end of Special HID drivers

#
# Intel ISH HID support
#
# CONFIG_INTEL_ISH_HID is not set
# end of Intel ISH HID support

#
# AMD SFH HID Support
#
# CONFIG_AMD_SFH_HID is not set
# end of AMD SFH HID Support
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#

#
# SPI RTC drivers
#

#
# SPI and I2C RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_FTRTC010 is not set

#
# HID Sensor RTC drivers
#
# CONFIG_DMADEVICES is not set

#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_DEBUG is not set
# CONFIG_DMABUF_HEAPS is not set
# end of DMABUF options

# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VIRT_DRIVERS is not set
# CONFIG_VIRTIO_MENU is not set
# CONFIG_VDPA is not set
CONFIG_VHOST_MENU=y
# CONFIG_VHOST_NET is not set
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set

#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support

# CONFIG_GREYBUS is not set
# CONFIG_STAGING is not set
# CONFIG_X86_PLATFORM_DEVICES is not set
CONFIG_PMC_ATOM=y
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
# CONFIG_SURFACE_PLATFORMS is not set
CONFIG_HAVE_CLK=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
# CONFIG_HWSPINLOCK is not set

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# end of Clock Source drivers

CONFIG_MAILBOX=y
CONFIG_PCC=y
# CONFIG_ALTERA_MBOX is not set
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
# end of Generic IOMMU Pagetable Support

# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_AMD_IOMMU is not set
# CONFIG_INTEL_IOMMU is not set
# CONFIG_IRQ_REMAP is not set

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers

#
# Rpmsg drivers
#
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers

# CONFIG_SOUNDWIRE is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers

#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers

#
# i.MX SoC drivers
#
# end of i.MX SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
# end of Enable LiteX SoC Builder specific drivers

#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers

# CONFIG_SOC_TI is not set

#
# Xilinx SoC drivers
#
# CONFIG_XILINX_VCU is not set
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set

#
# IRQ chip support
#
# end of IRQ chip support

# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set

#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# end of PHY Subsystem

# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set

#
# Performance monitor support
#
# end of Performance monitor support

# CONFIG_RAS is not set
# CONFIG_USB4 is not set

#
# Android
#
# CONFIG_ANDROID is not set
# end of Android

# CONFIG_LIBNVDIMM is not set
# CONFIG_DAX is not set
CONFIG_NVMEM=y
# CONFIG_NVMEM_SYSFS is not set
# CONFIG_NVMEM_RMEM is not set

#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# end of HW tracing support

# CONFIG_FPGA is not set
# CONFIG_TEE is not set
# CONFIG_UNISYS_VISORBUS is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# end of Device Drivers

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
CONFIG_BTRFS_FS=y
# CONFIG_BTRFS_FS_POSIX_ACL is not set
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
# CONFIG_FS_DAX is not set
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_MANDATORY_FILE_LOCKING is not set
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
# CONFIG_MOUNT_NOTIFICATIONS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_OVERLAY_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set
# end of Caches

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_EXFAT_FS is not set
# CONFIG_NTFS_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
CONFIG_TMPFS_INODE64=y
# CONFIG_HUGETLBFS is not set
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
# CONFIG_CONFIGFS_FS is not set
# end of Pseudo filesystems

# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
# CONFIG_UNICODE is not set
CONFIG_IO_WQ=y
# end of File systems

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_PAGE_TABLE_ISOLATION is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_FORTIFY_SOURCE is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity,bpf"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
# end of Memory initialization
# end of Kernel hardening options
# end of Security options

CONFIG_XOR_BLOCKS=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set

#
# Public-key cryptography
#
# CONFIG_CRYPTO_RSA is not set
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not set
# CONFIG_CRYPTO_ECRDSA is not set
# CONFIG_CRYPTO_SM2 is not set
# CONFIG_CRYPTO_CURVE25519 is not set
# CONFIG_CRYPTO_CURVE25519_X86 is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_ECHAINIV=y

#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CFB is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_OFB is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_NHPOLY1305_SSE2 is not set
# CONFIG_CRYPTO_NHPOLY1305_AVX2 is not set
# CONFIG_CRYPTO_ADIANTUM is not set
# CONFIG_CRYPTO_ESSIV is not set

#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_XXHASH=y
CONFIG_CRYPTO_BLAKE2B=y
# CONFIG_CRYPTO_BLAKE2S is not set
# CONFIG_CRYPTO_BLAKE2S_X86 is not set
CONFIG_CRYPTO_CRCT10DIF=y
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
# CONFIG_CRYPTO_SHA256_SSSE3 is not set
# CONFIG_CRYPTO_SHA512_SSSE3 is not set
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_SM3 is not set
# CONFIG_CRYPTO_STREEBOG is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
# CONFIG_CRYPTO_SM4 is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
# CONFIG_CRYPTO_LIB_BLAKE2S is not set
# CONFIG_CRYPTO_LIB_CHACHA is not set
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11
# CONFIG_CRYPTO_LIB_POLY1305 is not set
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_LIB_SHA256=y
# CONFIG_CRYPTO_HW is not set

#
# Certificates for signature checking
#
# end of Certificates for signature checking

CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=y
# CONFIG_RAID6_PQ_BENCHMARK is not set
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
# CONFIG_CORDIC is not set
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_XARRAY_MULTI=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_SWIOTLB=y
# CONFIG_DMA_CMA is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
# CONFIG_IRQ_POLL is not set
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_COPY_MC=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_SBITMAP=y
# CONFIG_STRING_SELFTEST is not set
# end of Library routines

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_PRINTK_CALLER=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_DEBUG_SYNCHRO_TEST is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DYNAMIC_DEBUG_CORE is not set
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_INFO_COMPRESSED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_BTF is not set
# CONFIG_GDB_SCRIPTS is not set
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_STACK_VALIDATION=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_HAVE_ARCH_KCSAN=y
# end of Generic Kernel Debugging Instruments

CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT=y
# CONFIG_PAGE_OWNER is not set
CONFIG_PAGE_POISONING=y
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
# CONFIG_DEBUG_WX is not set
CONFIG_GENERIC_PTDUMP=y
# CONFIG_PTDUMP_DEBUGFS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VM_VMACACHE is not set
# CONFIG_DEBUG_VM_RB is not set
# CONFIG_DEBUG_VM_PGFLAGS is not set
CONFIG_DEBUG_VM_PGTABLE=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_ARCH_SUPPORTS_KMAP_LOCAL_FORCE_MAP=y
# CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
CONFIG_KASAN=y
CONFIG_KASAN_GENERIC=y
CONFIG_KASAN_OUTLINE=y
# CONFIG_KASAN_INLINE is not set
CONFIG_KASAN_STACK=y
# CONFIG_KASAN_VMALLOC is not set
CONFIG_HAVE_ARCH_KFENCE=y
CONFIG_KFENCE=y
CONFIG_KFENCE_SAMPLE_INTERVAL=100
CONFIG_KFENCE_NUM_OBJECTS=255
CONFIG_KFENCE_STRESS_TEST_FAULTS=0
# end of Memory Debugging

# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SOFTLOCKUP_DETECTOR is not set
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
# CONFIG_SCHEDSTATS is not set
# end of Scheduler Debugging

# CONFIG_DEBUG_TIMEKEEPING is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_PROVE_LOCKING=y
# CONFIG_PROVE_RAW_LOCK_NESTING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# CONFIG_CSD_LOCK_WAIT_DEBUG is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)

CONFIG_TRACE_IRQFLAGS=y
CONFIG_TRACE_IRQFLAGS_NMI=y
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set

#
# Debug kernel data structures
#
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# end of Debug kernel data structures

# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_TRACE=y
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging

# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_PREEMPTIRQ_TRACEPOINTS=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
# CONFIG_STRICT_DEVMEM is not set

#
# x86 Debugging
#
# CONFIG_DEBUG_AID_FOR_SYZBOT is not set
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_EARLY_PRINTK_USB_XDBC is not set
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_FPU is not set
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set
# end of x86 Debugging

#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
# CONFIG_MEMTEST is not set
# end of Kernel Testing and Coverage
# end of Kernel hacking