* [v7 5/5] ext4: cleanup inode flag definitions
From: Li Xi @ 2014-11-22 5:24 UTC (permalink / raw)
To: linux-fsdevel-u79uwXL29TY76Z2rM5mHXA,
linux-ext4-u79uwXL29TY76Z2rM5mHXA,
linux-api-u79uwXL29TY76Z2rM5mHXA, tytso-3s7WtUTddSA,
adilger-m1MBpc4rdrD3fQ9qLvQP4Q, jack-AlSwsSmVLrQ,
viro-RmSDqhL/yNMiFSDQTTA3OLVCufUGDwFn, hch-wEGCiKHe2LqWVfeAwA7xHQ,
dmonakhov-GEFAQzZX7r8dnm+yROfE0A
In-Reply-To: <1416633895-4004-1-git-send-email-lixi-LfVdkaOWEx8@public.gmane.org>
The inode flags defined in uapi/linux/fs.h were migrated from
ext4.h. This patch changes the inode flag definitions in ext4.h
to VFS definitions to make the gaps between them clearer.
Signed-off-by: Li Xi <lixi-LfVdkaOWEx8@public.gmane.org>
---
fs/ext4/ext4.h | 50 +++++++++++++++++++++++++-------------------------
1 files changed, 25 insertions(+), 25 deletions(-)
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 542b388..a3083d5 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -362,33 +362,33 @@ struct flex_groups {
/*
* Inode flags
*/
-#define EXT4_SECRM_FL 0x00000001 /* Secure deletion */
-#define EXT4_UNRM_FL 0x00000002 /* Undelete */
-#define EXT4_COMPR_FL 0x00000004 /* Compress file */
-#define EXT4_SYNC_FL 0x00000008 /* Synchronous updates */
-#define EXT4_IMMUTABLE_FL 0x00000010 /* Immutable file */
-#define EXT4_APPEND_FL 0x00000020 /* writes to file may only append */
-#define EXT4_NODUMP_FL 0x00000040 /* do not dump file */
-#define EXT4_NOATIME_FL 0x00000080 /* do not update atime */
+#define EXT4_SECRM_FL FS_SECRM_FL /* Secure deletion */
+#define EXT4_UNRM_FL FS_UNRM_FL /* Undelete */
+#define EXT4_COMPR_FL FS_COMPR_FL /* Compress file */
+#define EXT4_SYNC_FL FS_SYNC_FL /* Synchronous updates */
+#define EXT4_IMMUTABLE_FL FS_IMMUTABLE_FL /* Immutable file */
+#define EXT4_APPEND_FL FS_APPEND_FL /* writes to file may only append */
+#define EXT4_NODUMP_FL FS_NODUMP_FL /* do not dump file */
+#define EXT4_NOATIME_FL FS_NOATIME_FL /* do not update atime */
/* Reserved for compression usage... */
-#define EXT4_DIRTY_FL 0x00000100
-#define EXT4_COMPRBLK_FL 0x00000200 /* One or more compressed clusters */
-#define EXT4_NOCOMPR_FL 0x00000400 /* Don't compress */
-#define EXT4_ECOMPR_FL 0x00000800 /* Compression error */
+#define EXT4_DIRTY_FL FS_DIRTY_FL
+#define EXT4_COMPRBLK_FL FS_COMPRBLK_FL /* One or more compressed clusters */
+#define EXT4_NOCOMPR_FL FS_NOCOMP_FL /* Don't compress */
+#define EXT4_ECOMPR_FL FS_ECOMPR_FL /* Compression error */
/* End compression flags --- maybe not all used */
-#define EXT4_INDEX_FL 0x00001000 /* hash-indexed directory */
-#define EXT4_IMAGIC_FL 0x00002000 /* AFS directory */
-#define EXT4_JOURNAL_DATA_FL 0x00004000 /* file data should be journaled */
-#define EXT4_NOTAIL_FL 0x00008000 /* file tail should not be merged */
-#define EXT4_DIRSYNC_FL 0x00010000 /* dirsync behaviour (directories only) */
-#define EXT4_TOPDIR_FL 0x00020000 /* Top of directory hierarchies*/
-#define EXT4_HUGE_FILE_FL 0x00040000 /* Set to each huge file */
-#define EXT4_EXTENTS_FL 0x00080000 /* Inode uses extents */
-#define EXT4_EA_INODE_FL 0x00200000 /* Inode used for large EA */
-#define EXT4_EOFBLOCKS_FL 0x00400000 /* Blocks allocated beyond EOF */
-#define EXT4_INLINE_DATA_FL 0x10000000 /* Inode has inline data. */
-#define EXT4_PROJINHERIT_FL FS_PROJINHERIT_FL /* Create with parents projid */
-#define EXT4_RESERVED_FL 0x80000000 /* reserved for ext4 lib */
+#define EXT4_INDEX_FL FS_INDEX_FL /* hash-indexed directory */
+#define EXT4_IMAGIC_FL FS_IMAGIC_FL /* AFS directory */
+#define EXT4_JOURNAL_DATA_FL FS_JOURNAL_DATA_FL /* file data should be journaled */
+#define EXT4_NOTAIL_FL FS_NOTAIL_FL /* file tail should not be merged */
+#define EXT4_DIRSYNC_FL FS_DIRSYNC_FL /* dirsync behaviour (directories only) */
+#define EXT4_TOPDIR_FL FS_TOPDIR_FL /* Top of directory hierarchies*/
+#define EXT4_HUGE_FILE_FL 0x00040000 /* Set to each huge file */
+#define EXT4_EXTENTS_FL FS_EXTENT_FL /* Inode uses extents */
+#define EXT4_EA_INODE_FL 0x00200000 /* Inode used for large EA */
+#define EXT4_EOFBLOCKS_FL 0x00400000 /* Blocks allocated beyond EOF */
+#define EXT4_INLINE_DATA_FL 0x10000000 /* Inode has inline data. */
+#define EXT4_PROJINHERIT_FL FS_PROJINHERIT_FL /* Create with parents projid */
+#define EXT4_RESERVED_FL FS_RESERVED_FL /* reserved for ext4 lib */
#define EXT4_FL_USER_VISIBLE 0x204BDFFF /* User visible flags */
#define EXT4_FL_USER_MODIFIABLE 0x204380FF /* User modifiable flags */
--
1.7.1
^ permalink raw reply related
* [PATCH 3/6] fs/splice: support compiling out splice-family syscalls
From: Pieter Smith @ 2014-11-22 20:59 UTC (permalink / raw)
To: pieter-qeJ+1H9vRZbz+pZb47iToQ
Cc: Josh Triplett, Alexander Viro, Andrew Morton, Paul E. McKenney,
Matt Turner, Michal Hocko, Geert Uytterhoeven,
蔡正龙, Paul Gortmaker, Bertrand Jacquin,
Luis R. Rodriguez, Fabian Frederick, Peter Foley,
Eric W. Biederman, Mel Gorman, Oleg Nesterov, Alexei Starovoitov,
Iulia Manda, Kees Cook, Catalina Mocanu,
linux-fsdevel-u79uwXL29TY76Z2rM5mHXA, ope
In-Reply-To: <1416690001-20817-1-git-send-email-pieter-qeJ+1H9vRZbz+pZb47iToQ@public.gmane.org>
Many embedded systems will not need the splice-family syscalls (splice,
vmsplice, tee and sendfile). Omitting them saves space. This adds a new EXPERT
config option CONFIG_SYSCALL_SPLICE (default y) to support compiling them out.
This patch removes almost all callers of .splice_read() and .splice_write()
in the file_operations struct. This paves the way to eventually compile out the
.splice_read and .splice_write members of the file_operations struct as well as
the remaining splice-related infrastructure.
add/remove: 0/16 grow/shrink: 2/5 up/down: 114/-3693 (-3579)
function old new delta
splice_direct_to_actor 348 416 +68
splice_to_pipe 371 417 +46
splice_from_pipe_next 107 106 -1
fdput 11 - -11
signal_pending 39 26 -13
fdget 56 42 -14
user_page_pipe_buf_ops 20 - -20
user_page_pipe_buf_steal 25 - -25
file_end_write 58 29 -29
file_start_write 68 34 -34
pipe_to_user 43 - -43
wakeup_pipe_readers 54 - -54
do_splice_to 87 - -87
ipipe_prep.part 92 - -92
opipe_prep.part 119 - -119
sys_sendfile 122 - -122
sys_sendfile64 126 - -126
sys_vmsplice 137 - -137
vmsplice_to_user 205 - -205
sys_tee 491 - -491
do_sendfile 492 - -492
vmsplice_to_pipe 558 - -558
sys_splice 1020 - -1020
Signed-off-by: Pieter Smith <pieter-qeJ+1H9vRZbz+pZb47iToQ@public.gmane.org>
---
fs/splice.c | 2 ++
init/Kconfig | 10 ++++++++++
kernel/sys_ni.c | 8 ++++++++
3 files changed, 20 insertions(+)
diff --git a/fs/splice.c b/fs/splice.c
index 44b201b..7c4c695 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -1316,6 +1316,7 @@ long do_splice_direct(struct file *in, loff_t *ppos, struct file *out,
return ret;
}
+#ifdef CONFIG_SYSCALL_SPLICE
static int splice_pipe_to_pipe(struct pipe_inode_info *ipipe,
struct pipe_inode_info *opipe,
size_t len, unsigned int flags);
@@ -2200,4 +2201,5 @@ COMPAT_SYSCALL_DEFINE4(sendfile64, int, out_fd, int, in_fd,
return do_sendfile(out_fd, in_fd, NULL, count, 0);
}
#endif
+#endif
diff --git a/init/Kconfig b/init/Kconfig
index d811d5f..dec9819 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1571,6 +1571,16 @@ config NTP
system clock to an NTP server, you can disable this option to save
space.
+config SYSCALL_SPLICE
+ bool "Enable splice/vmsplice/tee/sendfile syscalls" if EXPERT
+ default y
+ help
+ This option enables the splice, vmsplice, tee and sendfile syscalls. These
+ are used by applications to: move data between buffers and arbitrary file
+ descriptors; "copy" data between buffers; or copy data from userspace into
+ buffers. If building an embedded system where no applications use these
+ syscalls, you can disable this option to save space.
+
config PCI_QUIRKS
default y
bool "Enable PCI quirk workarounds" if EXPERT
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index d2f5b00..25d5551 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -170,6 +170,14 @@ cond_syscall(sys_fstat);
cond_syscall(sys_stat);
cond_syscall(sys_uname);
cond_syscall(sys_olduname);
+cond_syscall(sys_vmsplice);
+cond_syscall(sys_splice);
+cond_syscall(sys_tee);
+cond_syscall(sys_sendfile);
+cond_syscall(sys_sendfile64);
+cond_syscall(compat_sys_vmsplice);
+cond_syscall(compat_sys_sendfile);
+cond_syscall(compat_sys_sendfile64);
/* arch-specific weak syscall entries */
cond_syscall(sys_pciconfig_read);
--
1.9.1
^ permalink raw reply related
* Re: [PATCH 3/6] fs/splice: support compiling out splice-family syscalls
From: Josh Triplett @ 2014-11-22 21:50 UTC (permalink / raw)
To: Pieter Smith
Cc: Alexander Viro, Andrew Morton, Paul E. McKenney, Matt Turner,
Michal Hocko, Geert Uytterhoeven, 蔡正龙,
Paul Gortmaker, Bertrand Jacquin, Luis R. Rodriguez,
Fabian Frederick, Peter Foley, Eric W. Biederman, Mel Gorman,
Oleg Nesterov, Alexei Starovoitov, Iulia Manda, Kees Cook,
Catalina Mocanu, linux-fsdevel-u79uwXL29TY76Z2rM5mHXA, open list,
open list:ABI/API
In-Reply-To: <1416690001-20817-4-git-send-email-pieter-qeJ+1H9vRZbz+pZb47iToQ@public.gmane.org>
On Sat, Nov 22, 2014 at 09:59:58PM +0100, Pieter Smith wrote:
> Many embedded systems will not need the splice-family syscalls (splice,
> vmsplice, tee and sendfile). Omitting them saves space. This adds a new EXPERT
> config option CONFIG_SYSCALL_SPLICE (default y) to support compiling them out.
>
> This patch removes almost all callers of .splice_read() and .splice_write()
> in the file_operations struct. This paves the way to eventually compile out the
> .splice_read and .splice_write members of the file_operations struct as well as
> the remaining splice-related infrastructure.
This commit message doesn't reflect the new approach of leaving those
members in the structure.
The patch looks good otherwise.
- Josh Triplett
> add/remove: 0/16 grow/shrink: 2/5 up/down: 114/-3693 (-3579)
> function old new delta
> splice_direct_to_actor 348 416 +68
> splice_to_pipe 371 417 +46
> splice_from_pipe_next 107 106 -1
> fdput 11 - -11
> signal_pending 39 26 -13
> fdget 56 42 -14
> user_page_pipe_buf_ops 20 - -20
> user_page_pipe_buf_steal 25 - -25
> file_end_write 58 29 -29
> file_start_write 68 34 -34
> pipe_to_user 43 - -43
> wakeup_pipe_readers 54 - -54
> do_splice_to 87 - -87
> ipipe_prep.part 92 - -92
> opipe_prep.part 119 - -119
> sys_sendfile 122 - -122
> sys_sendfile64 126 - -126
> sys_vmsplice 137 - -137
> vmsplice_to_user 205 - -205
> sys_tee 491 - -491
> do_sendfile 492 - -492
> vmsplice_to_pipe 558 - -558
> sys_splice 1020 - -1020
>
> Signed-off-by: Pieter Smith <pieter-qeJ+1H9vRZbz+pZb47iToQ@public.gmane.org>
> ---
> fs/splice.c | 2 ++
> init/Kconfig | 10 ++++++++++
> kernel/sys_ni.c | 8 ++++++++
> 3 files changed, 20 insertions(+)
>
> diff --git a/fs/splice.c b/fs/splice.c
> index 44b201b..7c4c695 100644
> --- a/fs/splice.c
> +++ b/fs/splice.c
> @@ -1316,6 +1316,7 @@ long do_splice_direct(struct file *in, loff_t *ppos, struct file *out,
> return ret;
> }
>
> +#ifdef CONFIG_SYSCALL_SPLICE
> static int splice_pipe_to_pipe(struct pipe_inode_info *ipipe,
> struct pipe_inode_info *opipe,
> size_t len, unsigned int flags);
> @@ -2200,4 +2201,5 @@ COMPAT_SYSCALL_DEFINE4(sendfile64, int, out_fd, int, in_fd,
> return do_sendfile(out_fd, in_fd, NULL, count, 0);
> }
> #endif
> +#endif
>
> diff --git a/init/Kconfig b/init/Kconfig
> index d811d5f..dec9819 100644
> --- a/init/Kconfig
> +++ b/init/Kconfig
> @@ -1571,6 +1571,16 @@ config NTP
> system clock to an NTP server, you can disable this option to save
> space.
>
> +config SYSCALL_SPLICE
> + bool "Enable splice/vmsplice/tee/sendfile syscalls" if EXPERT
> + default y
> + help
> + This option enables the splice, vmsplice, tee and sendfile syscalls. These
> + are used by applications to: move data between buffers and arbitrary file
> + descriptors; "copy" data between buffers; or copy data from userspace into
> + buffers. If building an embedded system where no applications use these
> + syscalls, you can disable this option to save space.
> +
> config PCI_QUIRKS
> default y
> bool "Enable PCI quirk workarounds" if EXPERT
> diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
> index d2f5b00..25d5551 100644
> --- a/kernel/sys_ni.c
> +++ b/kernel/sys_ni.c
> @@ -170,6 +170,14 @@ cond_syscall(sys_fstat);
> cond_syscall(sys_stat);
> cond_syscall(sys_uname);
> cond_syscall(sys_olduname);
> +cond_syscall(sys_vmsplice);
> +cond_syscall(sys_splice);
> +cond_syscall(sys_tee);
> +cond_syscall(sys_sendfile);
> +cond_syscall(sys_sendfile64);
> +cond_syscall(compat_sys_vmsplice);
> +cond_syscall(compat_sys_sendfile);
> +cond_syscall(compat_sys_sendfile64);
>
> /* arch-specific weak syscall entries */
> cond_syscall(sys_pciconfig_read);
> --
> 1.9.1
>
^ permalink raw reply
* [PATCH 0/6] kernel tinification: optionally compile out splice family of syscalls (splice, vmsplice, tee and sendfile)
From: Pieter Smith @ 2014-11-23 14:20 UTC (permalink / raw)
To: pieter
Cc: Josh Triplett, Alexander Duyck, Alexander Viro,
Alexei Starovoitov, Andrew Morton, Bertrand Jacquin,
Catalina Mocanu, Daniel Borkmann, David S. Miller, Eric Dumazet,
Eric W. Biederman, Fabian Frederick,
open list:FUSE: FILESYSTEM..., Geert Uytterhoeven, Hugh Dickins,
Iulia Manda, Jan Beulich, J. Bruce Fields, Jeff Layton,
open list:ABI/API, linux-fsdevel, linux-kernel
REPO: https://github.com/smipi1/linux-tinification.git
BRANCH: tiny/config-syscall-splice
BACKGROUND: This patch-set forms part of the Linux Kernel Tinification effort (
https://tiny.wiki.kernel.org/).
GOAL: Support compiling out the splice family of syscalls (splice, vmsplice,
tee and sendfile) along with all supporting infrastructure if not needed.
Many embedded systems will not need the splice-family syscalls. Omitting them
saves space.
STRATEGY:
a. With the goal of eventually compiling out fs/splice.c, several functions
that are only used in support of the the splice family of syscalls are moved
into fs/splice.c from fs/read_write.c. The kernel_write function that is not
used to support the splice syscalls is moved to fs/read_write.c:
0001-fs-move-sendfile-syscall-into-fs-splice.patch
0002-fs-moved-kernel_write-to-fs-read_write.patch
b. Introduce an EXPERT kernel configuration option; CONFIG_SYSCALL_SPLICE; to
compile out the splice family of syscalls. This removes all userspace uses
of the splice infrastructure.
0003-fs-splice-support-compiling-out-splice-family-syscal.patch
c. Splice exports an operations struct, nosteal_pipe_buf_ops. Eliminate the
use of this struct when CONFIG_SYSCALL_SPLICE is undefined, so that splice
can later be compiled out:
0004-fs-fuse-support-compiling-out-splice.patch
0005-net-core-support-compiling-out-splice.patch
e. Compile out fs/splice.c. Functions exported by fs/splice are mocked out with
failing static inlines. This is done so as to all but eliminate the
maintenance burden on file-system drivers.
0006-fs-splice-full-support-for-compiling-out-splice.patch
RESULTS: A tinyconfig bloat-o-meter score for the entire patch-set:
add/remove: 0/41 grow/shrink: 5/7 up/down: 23/-8422 (-8399)
function old new delta
sys_pwritev 115 122 +7
sys_preadv 115 122 +7
fdput_pos 29 36 +7
sys_pwrite64 115 116 +1
sys_pread64 115 116 +1
pipe_to_null 4 - -4
generic_pipe_buf_nosteal 6 - -6
spd_release_page 10 - -10
fdput 11 - -11
PageUptodate 22 11 -11
lock_page 36 24 -12
signal_pending 39 26 -13
fdget 56 42 -14
page_cache_pipe_buf_release 16 - -16
user_page_pipe_buf_ops 20 - -20
splice_write_null 24 4 -20
page_cache_pipe_buf_ops 20 - -20
nosteal_pipe_buf_ops 20 - -20
default_pipe_buf_ops 20 - -20
generic_splice_sendpage 24 - -24
user_page_pipe_buf_steal 25 - -25
splice_shrink_spd 27 - -27
pipe_to_user 43 - -43
direct_splice_actor 47 - -47
default_file_splice_write 49 - -49
wakeup_pipe_writers 54 - -54
wakeup_pipe_readers 54 - -54
write_pipe_buf 71 - -71
page_cache_pipe_buf_confirm 80 - -80
splice_grow_spd 87 - -87
do_splice_to 87 - -87
ipipe_prep.part 92 - -92
splice_from_pipe 93 - -93
splice_from_pipe_next 107 - -107
pipe_to_sendpage 109 - -109
page_cache_pipe_buf_steal 114 - -114
opipe_prep.part 119 - -119
sys_sendfile 122 - -122
generic_file_splice_read 131 8 -123
sys_sendfile64 126 - -126
sys_vmsplice 137 - -137
do_splice_direct 148 - -148
vmsplice_to_user 205 - -205
__splice_from_pipe 246 - -246
splice_direct_to_actor 348 - -348
splice_to_pipe 371 - -371
do_sendfile 492 - -492
sys_tee 497 - -497
vmsplice_to_pipe 558 - -558
default_file_splice_read 688 - -688
iter_file_splice_write 702 4 -698
sys_splice 1075 - -1075
__generic_file_splice_read 1109 - -1109
Pieter Smith (6):
fs: move sendfile syscall into fs/splice
fs: moved kernel_write to fs/read_write
fs/splice: support compiling out splice-family syscalls
fs/fuse: support compiling out splice
net/core: support compiling out splice
fs/splice: full support for compiling out splice
fs/Makefile | 3 +-
fs/fuse/dev.c | 4 +-
fs/read_write.c | 181 +++------------------------------------------
fs/splice.c | 194 +++++++++++++++++++++++++++++++++++++++++++++----
include/linux/fs.h | 32 ++++++++
include/linux/skbuff.h | 9 +++
include/linux/splice.h | 42 +++++++++++
init/Kconfig | 10 +++
kernel/sys_ni.c | 8 ++
net/core/skbuff.c | 9 ++-
10 files changed, 300 insertions(+), 192 deletions(-)
--
2.1.0
^ permalink raw reply
* [PATCH 1/6] fs: move sendfile syscall into fs/splice
From: Pieter Smith @ 2014-11-23 14:20 UTC (permalink / raw)
To: pieter-qeJ+1H9vRZbz+pZb47iToQ
Cc: Josh Triplett, Alexander Duyck, Alexander Viro,
Alexei Starovoitov, Andrew Morton, Bertrand Jacquin,
Catalina Mocanu, Daniel Borkmann, David S. Miller, Eric Dumazet,
Eric W. Biederman, Fabian Frederick,
open list:FUSE: FILESYSTEM..., Geert Uytterhoeven, Hugh Dickins,
Iulia Manda, Jan Beulich, J. Bruce Fields, Jeff Layton,
open list:ABI/API, linux-fsdevel-u79uwXL29TY76Z2rM5mHXA,
linux-kernel
In-Reply-To: <1416752468-1626-1-git-send-email-pieter-qeJ+1H9vRZbz+pZb47iToQ@public.gmane.org>
sendfile functionally forms part of the splice group of syscalls (splice,
vmsplice and tee). Grouping sendfile with splice paves the way to compiling out
the splice group of syscalls for embedded systems that do not need these.
add/remove: 0/0 grow/shrink: 7/2 up/down: 86/-61 (25)
function old new delta
file_start_write 34 68 +34
file_end_write 29 58 +29
sys_pwritev 115 122 +7
sys_preadv 115 122 +7
fdput_pos 29 36 +7
sys_pwrite64 115 116 +1
sys_pread64 115 116 +1
sys_tee 497 491 -6
sys_splice 1075 1020 -55
Signed-off-by: Pieter Smith <pieter-qeJ+1H9vRZbz+pZb47iToQ@public.gmane.org>
---
fs/read_write.c | 175 -------------------------------------------------------
fs/splice.c | 178 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 178 insertions(+), 175 deletions(-)
diff --git a/fs/read_write.c b/fs/read_write.c
index 7d9318c..d9451ba 100644
--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -1191,178 +1191,3 @@ COMPAT_SYSCALL_DEFINE5(pwritev, compat_ulong_t, fd,
}
#endif
-static ssize_t do_sendfile(int out_fd, int in_fd, loff_t *ppos,
- size_t count, loff_t max)
-{
- struct fd in, out;
- struct inode *in_inode, *out_inode;
- loff_t pos;
- loff_t out_pos;
- ssize_t retval;
- int fl;
-
- /*
- * Get input file, and verify that it is ok..
- */
- retval = -EBADF;
- in = fdget(in_fd);
- if (!in.file)
- goto out;
- if (!(in.file->f_mode & FMODE_READ))
- goto fput_in;
- retval = -ESPIPE;
- if (!ppos) {
- pos = in.file->f_pos;
- } else {
- pos = *ppos;
- if (!(in.file->f_mode & FMODE_PREAD))
- goto fput_in;
- }
- retval = rw_verify_area(READ, in.file, &pos, count);
- if (retval < 0)
- goto fput_in;
- count = retval;
-
- /*
- * Get output file, and verify that it is ok..
- */
- retval = -EBADF;
- out = fdget(out_fd);
- if (!out.file)
- goto fput_in;
- if (!(out.file->f_mode & FMODE_WRITE))
- goto fput_out;
- retval = -EINVAL;
- in_inode = file_inode(in.file);
- out_inode = file_inode(out.file);
- out_pos = out.file->f_pos;
- retval = rw_verify_area(WRITE, out.file, &out_pos, count);
- if (retval < 0)
- goto fput_out;
- count = retval;
-
- if (!max)
- max = min(in_inode->i_sb->s_maxbytes, out_inode->i_sb->s_maxbytes);
-
- if (unlikely(pos + count > max)) {
- retval = -EOVERFLOW;
- if (pos >= max)
- goto fput_out;
- count = max - pos;
- }
-
- fl = 0;
-#if 0
- /*
- * We need to debate whether we can enable this or not. The
- * man page documents EAGAIN return for the output at least,
- * and the application is arguably buggy if it doesn't expect
- * EAGAIN on a non-blocking file descriptor.
- */
- if (in.file->f_flags & O_NONBLOCK)
- fl = SPLICE_F_NONBLOCK;
-#endif
- file_start_write(out.file);
- retval = do_splice_direct(in.file, &pos, out.file, &out_pos, count, fl);
- file_end_write(out.file);
-
- if (retval > 0) {
- add_rchar(current, retval);
- add_wchar(current, retval);
- fsnotify_access(in.file);
- fsnotify_modify(out.file);
- out.file->f_pos = out_pos;
- if (ppos)
- *ppos = pos;
- else
- in.file->f_pos = pos;
- }
-
- inc_syscr(current);
- inc_syscw(current);
- if (pos > max)
- retval = -EOVERFLOW;
-
-fput_out:
- fdput(out);
-fput_in:
- fdput(in);
-out:
- return retval;
-}
-
-SYSCALL_DEFINE4(sendfile, int, out_fd, int, in_fd, off_t __user *, offset, size_t, count)
-{
- loff_t pos;
- off_t off;
- ssize_t ret;
-
- if (offset) {
- if (unlikely(get_user(off, offset)))
- return -EFAULT;
- pos = off;
- ret = do_sendfile(out_fd, in_fd, &pos, count, MAX_NON_LFS);
- if (unlikely(put_user(pos, offset)))
- return -EFAULT;
- return ret;
- }
-
- return do_sendfile(out_fd, in_fd, NULL, count, 0);
-}
-
-SYSCALL_DEFINE4(sendfile64, int, out_fd, int, in_fd, loff_t __user *, offset, size_t, count)
-{
- loff_t pos;
- ssize_t ret;
-
- if (offset) {
- if (unlikely(copy_from_user(&pos, offset, sizeof(loff_t))))
- return -EFAULT;
- ret = do_sendfile(out_fd, in_fd, &pos, count, 0);
- if (unlikely(put_user(pos, offset)))
- return -EFAULT;
- return ret;
- }
-
- return do_sendfile(out_fd, in_fd, NULL, count, 0);
-}
-
-#ifdef CONFIG_COMPAT
-COMPAT_SYSCALL_DEFINE4(sendfile, int, out_fd, int, in_fd,
- compat_off_t __user *, offset, compat_size_t, count)
-{
- loff_t pos;
- off_t off;
- ssize_t ret;
-
- if (offset) {
- if (unlikely(get_user(off, offset)))
- return -EFAULT;
- pos = off;
- ret = do_sendfile(out_fd, in_fd, &pos, count, MAX_NON_LFS);
- if (unlikely(put_user(pos, offset)))
- return -EFAULT;
- return ret;
- }
-
- return do_sendfile(out_fd, in_fd, NULL, count, 0);
-}
-
-COMPAT_SYSCALL_DEFINE4(sendfile64, int, out_fd, int, in_fd,
- compat_loff_t __user *, offset, compat_size_t, count)
-{
- loff_t pos;
- ssize_t ret;
-
- if (offset) {
- if (unlikely(copy_from_user(&pos, offset, sizeof(loff_t))))
- return -EFAULT;
- ret = do_sendfile(out_fd, in_fd, &pos, count, 0);
- if (unlikely(put_user(pos, offset)))
- return -EFAULT;
- return ret;
- }
-
- return do_sendfile(out_fd, in_fd, NULL, count, 0);
-}
-#endif
diff --git a/fs/splice.c b/fs/splice.c
index f5cb9ba..c1a2861 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -28,6 +28,7 @@
#include <linux/export.h>
#include <linux/syscalls.h>
#include <linux/uio.h>
+#include <linux/fsnotify.h>
#include <linux/security.h>
#include <linux/gfp.h>
#include <linux/socket.h>
@@ -2039,3 +2040,180 @@ SYSCALL_DEFINE4(tee, int, fdin, int, fdout, size_t, len, unsigned int, flags)
return error;
}
+
+static ssize_t do_sendfile(int out_fd, int in_fd, loff_t *ppos,
+ size_t count, loff_t max)
+{
+ struct fd in, out;
+ struct inode *in_inode, *out_inode;
+ loff_t pos;
+ loff_t out_pos;
+ ssize_t retval;
+ int fl;
+
+ /*
+ * Get input file, and verify that it is ok..
+ */
+ retval = -EBADF;
+ in = fdget(in_fd);
+ if (!in.file)
+ goto out;
+ if (!(in.file->f_mode & FMODE_READ))
+ goto fput_in;
+ retval = -ESPIPE;
+ if (!ppos) {
+ pos = in.file->f_pos;
+ } else {
+ pos = *ppos;
+ if (!(in.file->f_mode & FMODE_PREAD))
+ goto fput_in;
+ }
+ retval = rw_verify_area(READ, in.file, &pos, count);
+ if (retval < 0)
+ goto fput_in;
+ count = retval;
+
+ /*
+ * Get output file, and verify that it is ok..
+ */
+ retval = -EBADF;
+ out = fdget(out_fd);
+ if (!out.file)
+ goto fput_in;
+ if (!(out.file->f_mode & FMODE_WRITE))
+ goto fput_out;
+ retval = -EINVAL;
+ in_inode = file_inode(in.file);
+ out_inode = file_inode(out.file);
+ out_pos = out.file->f_pos;
+ retval = rw_verify_area(WRITE, out.file, &out_pos, count);
+ if (retval < 0)
+ goto fput_out;
+ count = retval;
+
+ if (!max)
+ max = min(in_inode->i_sb->s_maxbytes, out_inode->i_sb->s_maxbytes);
+
+ if (unlikely(pos + count > max)) {
+ retval = -EOVERFLOW;
+ if (pos >= max)
+ goto fput_out;
+ count = max - pos;
+ }
+
+ fl = 0;
+#if 0
+ /*
+ * We need to debate whether we can enable this or not. The
+ * man page documents EAGAIN return for the output at least,
+ * and the application is arguably buggy if it doesn't expect
+ * EAGAIN on a non-blocking file descriptor.
+ */
+ if (in.file->f_flags & O_NONBLOCK)
+ fl = SPLICE_F_NONBLOCK;
+#endif
+ file_start_write(out.file);
+ retval = do_splice_direct(in.file, &pos, out.file, &out_pos, count, fl);
+ file_end_write(out.file);
+
+ if (retval > 0) {
+ add_rchar(current, retval);
+ add_wchar(current, retval);
+ fsnotify_access(in.file);
+ fsnotify_modify(out.file);
+ out.file->f_pos = out_pos;
+ if (ppos)
+ *ppos = pos;
+ else
+ in.file->f_pos = pos;
+ }
+
+ inc_syscr(current);
+ inc_syscw(current);
+ if (pos > max)
+ retval = -EOVERFLOW;
+
+fput_out:
+ fdput(out);
+fput_in:
+ fdput(in);
+out:
+ return retval;
+}
+
+SYSCALL_DEFINE4(sendfile, int, out_fd, int, in_fd, off_t __user *, offset, size_t, count)
+{
+ loff_t pos;
+ off_t off;
+ ssize_t ret;
+
+ if (offset) {
+ if (unlikely(get_user(off, offset)))
+ return -EFAULT;
+ pos = off;
+ ret = do_sendfile(out_fd, in_fd, &pos, count, MAX_NON_LFS);
+ if (unlikely(put_user(pos, offset)))
+ return -EFAULT;
+ return ret;
+ }
+
+ return do_sendfile(out_fd, in_fd, NULL, count, 0);
+}
+
+SYSCALL_DEFINE4(sendfile64, int, out_fd, int, in_fd, loff_t __user *, offset, size_t, count)
+{
+ loff_t pos;
+ ssize_t ret;
+
+ if (offset) {
+ if (unlikely(copy_from_user(&pos, offset, sizeof(loff_t))))
+ return -EFAULT;
+ ret = do_sendfile(out_fd, in_fd, &pos, count, 0);
+ if (unlikely(put_user(pos, offset)))
+ return -EFAULT;
+ return ret;
+ }
+
+ return do_sendfile(out_fd, in_fd, NULL, count, 0);
+}
+
+#ifdef CONFIG_COMPAT
+COMPAT_SYSCALL_DEFINE4(sendfile, int, out_fd, int, in_fd,
+ compat_off_t __user *, offset, compat_size_t, count)
+{
+ loff_t pos;
+ off_t off;
+ ssize_t ret;
+
+ if (offset) {
+ if (unlikely(get_user(off, offset)))
+ return -EFAULT;
+ pos = off;
+ ret = do_sendfile(out_fd, in_fd, &pos, count, MAX_NON_LFS);
+ if (unlikely(put_user(pos, offset)))
+ return -EFAULT;
+ return ret;
+ }
+
+ return do_sendfile(out_fd, in_fd, NULL, count, 0);
+}
+
+COMPAT_SYSCALL_DEFINE4(sendfile64, int, out_fd, int, in_fd,
+ compat_loff_t __user *, offset, compat_size_t, count)
+{
+ loff_t pos;
+ ssize_t ret;
+
+ if (offset) {
+ if (unlikely(copy_from_user(&pos, offset, sizeof(loff_t))))
+ return -EFAULT;
+ ret = do_sendfile(out_fd, in_fd, &pos, count, 0);
+ if (unlikely(put_user(pos, offset)))
+ return -EFAULT;
+ return ret;
+ }
+
+ return do_sendfile(out_fd, in_fd, NULL, count, 0);
+}
+#endif
+
--
2.1.0
^ permalink raw reply related
* [PATCH 2/6] fs: moved kernel_write to fs/read_write
From: Pieter Smith @ 2014-11-23 14:20 UTC (permalink / raw)
To: pieter
Cc: Josh Triplett, Alexander Duyck, Alexander Viro,
Alexei Starovoitov, Andrew Morton, Bertrand Jacquin,
Catalina Mocanu, Daniel Borkmann, David S. Miller, Eric Dumazet,
Eric W. Biederman, Fabian Frederick,
open list:FUSE: FILESYSTEM..., Geert Uytterhoeven, Hugh Dickins,
Iulia Manda, Jan Beulich, J. Bruce Fields, Jeff Layton,
open list:ABI/API, linux-fsdevel, linux-kernel
In-Reply-To: <1416752468-1626-1-git-send-email-pieter@boesman.nl>
kernel_write shares infrastructure with the read_write translation unit but not
with the splice translation unit. Grouping kernel_write with the read_write
translation unit is more logical. It also paves the way to compiling out the
splice group of syscalls for embedded systems that do not need them.
Signed-off-by: Pieter Smith <pieter@boesman.nl>
---
fs/read_write.c | 16 ++++++++++++++++
fs/splice.c | 16 ----------------
2 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/fs/read_write.c b/fs/read_write.c
index d9451ba..f4c8d8b 100644
--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -1191,3 +1191,19 @@ COMPAT_SYSCALL_DEFINE5(pwritev, compat_ulong_t, fd,
}
#endif
+ssize_t kernel_write(struct file *file, const char *buf, size_t count,
+ loff_t pos)
+{
+ mm_segment_t old_fs;
+ ssize_t res;
+
+ old_fs = get_fs();
+ set_fs(get_ds());
+ /* The cast to a user pointer is valid due to the set_fs() */
+ res = vfs_write(file, (__force const char __user *)buf, count, &pos);
+ set_fs(old_fs);
+
+ return res;
+}
+EXPORT_SYMBOL(kernel_write);
+
diff --git a/fs/splice.c b/fs/splice.c
index c1a2861..44b201b 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -583,22 +583,6 @@ static ssize_t kernel_readv(struct file *file, const struct iovec *vec,
return res;
}
-ssize_t kernel_write(struct file *file, const char *buf, size_t count,
- loff_t pos)
-{
- mm_segment_t old_fs;
- ssize_t res;
-
- old_fs = get_fs();
- set_fs(get_ds());
- /* The cast to a user pointer is valid due to the set_fs() */
- res = vfs_write(file, (__force const char __user *)buf, count, &pos);
- set_fs(old_fs);
-
- return res;
-}
-EXPORT_SYMBOL(kernel_write);
-
ssize_t default_file_splice_read(struct file *in, loff_t *ppos,
struct pipe_inode_info *pipe, size_t len,
unsigned int flags)
--
2.1.0
^ permalink raw reply related
* [PATCH 3/6] fs/splice: support compiling out splice-family syscalls
From: Pieter Smith @ 2014-11-23 14:20 UTC (permalink / raw)
To: pieter
Cc: Josh Triplett, Alexander Duyck, Alexander Viro,
Alexei Starovoitov, Andrew Morton, Bertrand Jacquin,
Catalina Mocanu, Daniel Borkmann, David S. Miller, Eric Dumazet,
Eric W. Biederman, Fabian Frederick,
open list:FUSE: FILESYSTEM..., Geert Uytterhoeven, Hugh Dickins,
Iulia Manda, Jan Beulich, J. Bruce Fields, Jeff Layton,
open list:ABI/API, linux-fsdevel, linux-kernel
In-Reply-To: <1416752468-1626-1-git-send-email-pieter@boesman.nl>
Many embedded systems will not need the splice-family syscalls (splice,
vmsplice, tee and sendfile). Omitting them saves space. This adds a new EXPERT
config option CONFIG_SYSCALL_SPLICE (default y) to support compiling them out.
The goal is to completely compile out fs/splice. To achieve this, the remaining
patch-set will deal with fs/splice exports. As far as possible, the impact on
other device drivers will be minimized so as to reduce the maintenance burden
of CONFIG_SYSCALL_SPLICE.
The use of exported functions will be solved by transparently mocking them out
with static inlines. Use of the exported pipe_buf_operations struct however
require direct modification in fs/fuse and net/core. The next two patches will
deal with this.
Once all exports are solved, fs/splice can be compiled out.
The bloat benefit of this patch given a tinyconfig is:
add/remove: 0/16 grow/shrink: 2/5 up/down: 114/-3693 (-3579)
function old new delta
splice_direct_to_actor 348 416 +68
splice_to_pipe 371 417 +46
splice_from_pipe_next 107 106 -1
fdput 11 - -11
signal_pending 39 26 -13
fdget 56 42 -14
user_page_pipe_buf_ops 20 - -20
user_page_pipe_buf_steal 25 - -25
file_end_write 58 29 -29
file_start_write 68 34 -34
pipe_to_user 43 - -43
wakeup_pipe_readers 54 - -54
do_splice_to 87 - -87
ipipe_prep.part 92 - -92
opipe_prep.part 119 - -119
sys_sendfile 122 - -122
sys_sendfile64 126 - -126
sys_vmsplice 137 - -137
vmsplice_to_user 205 - -205
sys_tee 491 - -491
do_sendfile 492 - -492
vmsplice_to_pipe 558 - -558
sys_splice 1020 - -1020
Signed-off-by: Pieter Smith <pieter@boesman.nl>
---
fs/splice.c | 2 ++
init/Kconfig | 10 ++++++++++
kernel/sys_ni.c | 8 ++++++++
3 files changed, 20 insertions(+)
diff --git a/fs/splice.c b/fs/splice.c
index 44b201b..7c4c695 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -1316,6 +1316,7 @@ long do_splice_direct(struct file *in, loff_t *ppos, struct file *out,
return ret;
}
+#ifdef CONFIG_SYSCALL_SPLICE
static int splice_pipe_to_pipe(struct pipe_inode_info *ipipe,
struct pipe_inode_info *opipe,
size_t len, unsigned int flags);
@@ -2200,4 +2201,5 @@ COMPAT_SYSCALL_DEFINE4(sendfile64, int, out_fd, int, in_fd,
return do_sendfile(out_fd, in_fd, NULL, count, 0);
}
#endif
+#endif
diff --git a/init/Kconfig b/init/Kconfig
index d811d5f..dec9819 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1571,6 +1571,16 @@ config NTP
system clock to an NTP server, you can disable this option to save
space.
+config SYSCALL_SPLICE
+ bool "Enable splice/vmsplice/tee/sendfile syscalls" if EXPERT
+ default y
+ help
+ This option enables the splice, vmsplice, tee and sendfile syscalls. These
+ are used by applications to: move data between buffers and arbitrary file
+ descriptors; "copy" data between buffers; or copy data from userspace into
+ buffers. If building an embedded system where no applications use these
+ syscalls, you can disable this option to save space.
+
config PCI_QUIRKS
default y
bool "Enable PCI quirk workarounds" if EXPERT
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index d2f5b00..25d5551 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -170,6 +170,14 @@ cond_syscall(sys_fstat);
cond_syscall(sys_stat);
cond_syscall(sys_uname);
cond_syscall(sys_olduname);
+cond_syscall(sys_vmsplice);
+cond_syscall(sys_splice);
+cond_syscall(sys_tee);
+cond_syscall(sys_sendfile);
+cond_syscall(sys_sendfile64);
+cond_syscall(compat_sys_vmsplice);
+cond_syscall(compat_sys_sendfile);
+cond_syscall(compat_sys_sendfile64);
/* arch-specific weak syscall entries */
cond_syscall(sys_pciconfig_read);
--
2.1.0
^ permalink raw reply related
* [PATCH 4/6] fs/fuse: support compiling out splice
From: Pieter Smith @ 2014-11-23 14:20 UTC (permalink / raw)
To: pieter
Cc: Josh Triplett, Alexander Duyck, Alexander Viro,
Alexei Starovoitov, Andrew Morton, Bertrand Jacquin,
Catalina Mocanu, Daniel Borkmann, David S. Miller, Eric Dumazet,
Eric W. Biederman, Fabian Frederick,
open list:FUSE: FILESYSTEM..., Geert Uytterhoeven, Hugh Dickins,
Iulia Manda, Jan Beulich, J. Bruce Fields, Jeff Layton,
open list:ABI/API, linux-fsdevel, linux-kernel
In-Reply-To: <1416752468-1626-1-git-send-email-pieter@boesman.nl>
To implement splice support, fs/fuse makes use of nosteal_pipe_buf_ops. This
struct is exported by fs/splice. The goal of the larger patch set is to
completely compile out fs/splice, so uses of the exported struct need to be
compiled out along with fs/splice.
This patch therefore compiles out splice support in fs/fuse when
CONFIG_SYSCALL_SPLICE is undefined.
Signed-off-by: Pieter Smith <pieter@boesman.nl>
---
fs/fuse/dev.c | 4 ++--
include/linux/fs.h | 6 ++++++
2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index ca88731..f8f92a4 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -1291,7 +1291,7 @@ static ssize_t fuse_dev_read(struct kiocb *iocb, const struct iovec *iov,
return fuse_dev_do_read(fc, file, &cs, iov_length(iov, nr_segs));
}
-static ssize_t fuse_dev_splice_read(struct file *in, loff_t *ppos,
+static ssize_t __maybe_unused fuse_dev_splice_read(struct file *in, loff_t *ppos,
struct pipe_inode_info *pipe,
size_t len, unsigned int flags)
{
@@ -2144,7 +2144,7 @@ const struct file_operations fuse_dev_operations = {
.llseek = no_llseek,
.read = do_sync_read,
.aio_read = fuse_dev_read,
- .splice_read = fuse_dev_splice_read,
+ .splice_read = __splice_p(fuse_dev_splice_read),
.write = do_sync_write,
.aio_write = fuse_dev_write,
.splice_write = fuse_dev_splice_write,
diff --git a/include/linux/fs.h b/include/linux/fs.h
index a957d43..04c0975 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2443,6 +2443,12 @@ extern int blkdev_fsync(struct file *filp, loff_t start, loff_t end,
int datasync);
extern void block_sync_page(struct page *page);
+#ifdef CONFIG_SYSCALL_SPLICE
+#define __splice_p(x) x
+#else
+#define __splice_p(x) NULL
+#endif
+
/* fs/splice.c */
extern ssize_t generic_file_splice_read(struct file *, loff_t *,
struct pipe_inode_info *, size_t, unsigned int);
--
2.1.0
^ permalink raw reply related
* [PATCH 5/6] net/core: support compiling out splice
From: Pieter Smith @ 2014-11-23 14:20 UTC (permalink / raw)
To: pieter-qeJ+1H9vRZbz+pZb47iToQ
Cc: Michael S. Tsirkin, Bertrand Jacquin, Oleg Nesterov,
J. Bruce Fields, Eric Dumazet, 蔡正龙,
Jeff Layton, Tom Herbert, Alexei Starovoitov, Miklos Szeredi,
Peter Foley, Hugh Dickins, Xiao Guangrong, Geert Uytterhoeven,
Mel Gorman, Matt Turner, Paul E. McKenney, Alexander Duyck,
open list:FUSE: FILESYSTEM..., Luis R. Rodriguez, Josh Triplett
In-Reply-To: <1416752468-1626-1-git-send-email-pieter-qeJ+1H9vRZbz+pZb47iToQ@public.gmane.org>
To implement splice support, net/core makes use of nosteal_pipe_buf_ops. This
struct is exported by fs/splice. The goal of the larger patch set is to
completely compile out fs/splice, so uses of the exported struct need to be
compiled out along with fs/splice.
This patch therefore compiles out splice support in net/core when
CONFIG_SYSCALL_SPLICE is undefined. The compiled out function skb_splice_bits
is transparently mocked out with a static inline. The greater patch set removes
userspace splice support so it cannot be called anyway.
Signed-off-by: Pieter Smith <pieter-qeJ+1H9vRZbz+pZb47iToQ@public.gmane.org>
---
include/linux/skbuff.h | 9 +++++++++
net/core/skbuff.c | 9 ++++++---
2 files changed, 15 insertions(+), 3 deletions(-)
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index a59d934..54a50c1 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -2640,9 +2640,18 @@ int skb_copy_bits(const struct sk_buff *skb, int offset, void *to, int len);
int skb_store_bits(struct sk_buff *skb, int offset, const void *from, int len);
__wsum skb_copy_and_csum_bits(const struct sk_buff *skb, int offset, u8 *to,
int len, __wsum csum);
+#ifdef CONFIG_SYSCALL_SPLICE
int skb_splice_bits(struct sk_buff *skb, unsigned int offset,
struct pipe_inode_info *pipe, unsigned int len,
unsigned int flags);
+#else
+static inline int skb_splice_bits(struct sk_buff *skb, unsigned int offset,
+ struct pipe_inode_info *pipe, unsigned int len,
+ unsigned int flags)
+{
+ return -EPERM;
+}
+#endif
void skb_copy_and_csum_dev(const struct sk_buff *skb, u8 *to);
unsigned int skb_zerocopy_headlen(const struct sk_buff *from);
int skb_zerocopy(struct sk_buff *to, struct sk_buff *from,
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 61059a0..74fad8a 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -1781,9 +1781,9 @@ static bool __splice_segment(struct page *page, unsigned int poff,
* Map linear and fragment data from the skb to spd. It reports true if the
* pipe is full or if we already spliced the requested length.
*/
-static bool __skb_splice_bits(struct sk_buff *skb, struct pipe_inode_info *pipe,
- unsigned int *offset, unsigned int *len,
- struct splice_pipe_desc *spd, struct sock *sk)
+static bool __maybe_unused __skb_splice_bits(struct sk_buff *skb, struct pipe_inode_info *pipe,
+ unsigned int *offset, unsigned int *len,
+ struct splice_pipe_desc *spd, struct sock *sk)
{
int seg;
@@ -1821,6 +1821,7 @@ static bool __skb_splice_bits(struct sk_buff *skb, struct pipe_inode_info *pipe,
* the frag list, if such a thing exists. We'd probably need to recurse to
* handle that cleanly.
*/
+#ifdef CONFIG_SYSCALL_SPLICE
int skb_splice_bits(struct sk_buff *skb, unsigned int offset,
struct pipe_inode_info *pipe, unsigned int tlen,
unsigned int flags)
@@ -1876,6 +1877,8 @@ done:
return ret;
}
+#endif /* #ifdef CONFIG_SYSCALL_SPLICE */
+
/**
* skb_store_bits - store bits from kernel buffer to skb
--
2.1.0
------------------------------------------------------------------------------
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration & more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
^ permalink raw reply related
* [PATCH 6/6] fs/splice: full support for compiling out splice
From: Pieter Smith @ 2014-11-23 14:20 UTC (permalink / raw)
To: pieter-qeJ+1H9vRZbz+pZb47iToQ
Cc: Michael S. Tsirkin, Bertrand Jacquin, Oleg Nesterov,
J. Bruce Fields, Eric Dumazet, 蔡正龙,
Jeff Layton, Tom Herbert, Alexei Starovoitov, Miklos Szeredi,
Peter Foley, Hugh Dickins, Xiao Guangrong, Geert Uytterhoeven,
Mel Gorman, Matt Turner, Paul E. McKenney, Alexander Duyck,
open list:FUSE: FILESYSTEM..., Luis R. Rodriguez, Josh Triplett
In-Reply-To: <1416752468-1626-1-git-send-email-pieter-qeJ+1H9vRZbz+pZb47iToQ@public.gmane.org>
Entirely compile out splice translation unit when the system is configured
without splice family of syscalls (i.e. CONFIG_SYSCALL_SPLICE is undefined).
Exported fs/splice functions are transparently mocked out with static inlines.
Because userspace support for splice has already been removed by this
patch-set, the exported functions cannot be called anyway. Mocking them out
prevents a maintenance burden on file system drivers.
The bloat score resulting from this patch given a tinyconfig is:
add/remove: 0/25 grow/shrink: 0/5 up/down: 0/-4845 (-4845)
function old new delta
pipe_to_null 4 - -4
generic_pipe_buf_nosteal 6 - -6
spd_release_page 10 - -10
PageUptodate 22 11 -11
lock_page 36 24 -12
page_cache_pipe_buf_release 16 - -16
splice_write_null 24 4 -20
page_cache_pipe_buf_ops 20 - -20
nosteal_pipe_buf_ops 20 - -20
default_pipe_buf_ops 20 - -20
generic_splice_sendpage 24 - -24
splice_shrink_spd 27 - -27
direct_splice_actor 47 - -47
default_file_splice_write 49 - -49
wakeup_pipe_writers 54 - -54
write_pipe_buf 71 - -71
page_cache_pipe_buf_confirm 80 - -80
splice_grow_spd 87 - -87
splice_from_pipe 93 - -93
splice_from_pipe_next 106 - -106
pipe_to_sendpage 109 - -109
page_cache_pipe_buf_steal 114 - -114
generic_file_splice_read 131 8 -123
do_splice_direct 148 - -148
__splice_from_pipe 246 - -246
splice_direct_to_actor 416 - -416
splice_to_pipe 417 - -417
default_file_splice_read 688 - -688
iter_file_splice_write 702 4 -698
__generic_file_splice_read 1109 - -1109
The bloat score for the entire CONFIG_SYSCALL_SPLICE patch-set is:
add/remove: 0/41 grow/shrink: 5/7 up/down: 23/-8422 (-8399)
function old new delta
sys_pwritev 115 122 +7
sys_preadv 115 122 +7
fdput_pos 29 36 +7
sys_pwrite64 115 116 +1
sys_pread64 115 116 +1
pipe_to_null 4 - -4
generic_pipe_buf_nosteal 6 - -6
spd_release_page 10 - -10
fdput 11 - -11
PageUptodate 22 11 -11
lock_page 36 24 -12
signal_pending 39 26 -13
fdget 56 42 -14
page_cache_pipe_buf_release 16 - -16
user_page_pipe_buf_ops 20 - -20
splice_write_null 24 4 -20
page_cache_pipe_buf_ops 20 - -20
nosteal_pipe_buf_ops 20 - -20
default_pipe_buf_ops 20 - -20
generic_splice_sendpage 24 - -24
user_page_pipe_buf_steal 25 - -25
splice_shrink_spd 27 - -27
pipe_to_user 43 - -43
direct_splice_actor 47 - -47
default_file_splice_write 49 - -49
wakeup_pipe_writers 54 - -54
wakeup_pipe_readers 54 - -54
write_pipe_buf 71 - -71
page_cache_pipe_buf_confirm 80 - -80
splice_grow_spd 87 - -87
do_splice_to 87 - -87
ipipe_prep.part 92 - -92
splice_from_pipe 93 - -93
splice_from_pipe_next 107 - -107
pipe_to_sendpage 109 - -109
page_cache_pipe_buf_steal 114 - -114
opipe_prep.part 119 - -119
sys_sendfile 122 - -122
generic_file_splice_read 131 8 -123
sys_sendfile64 126 - -126
sys_vmsplice 137 - -137
do_splice_direct 148 - -148
vmsplice_to_user 205 - -205
__splice_from_pipe 246 - -246
splice_direct_to_actor 348 - -348
splice_to_pipe 371 - -371
do_sendfile 492 - -492
sys_tee 497 - -497
vmsplice_to_pipe 558 - -558
default_file_splice_read 688 - -688
iter_file_splice_write 702 4 -698
sys_splice 1075 - -1075
__generic_file_splice_read 1109 - -1109
Signed-off-by: Pieter Smith <pieter-qeJ+1H9vRZbz+pZb47iToQ@public.gmane.org>
---
fs/Makefile | 3 ++-
fs/splice.c | 2 --
include/linux/fs.h | 26 ++++++++++++++++++++++++++
include/linux/splice.h | 42 ++++++++++++++++++++++++++++++++++++++++++
4 files changed, 70 insertions(+), 3 deletions(-)
diff --git a/fs/Makefile b/fs/Makefile
index fb7646e..9395622 100644
--- a/fs/Makefile
+++ b/fs/Makefile
@@ -10,7 +10,7 @@ obj-y := open.o read_write.o file_table.o super.o \
ioctl.o readdir.o select.o dcache.o inode.o \
attr.o bad_inode.o file.o filesystems.o namespace.o \
seq_file.o xattr.o libfs.o fs-writeback.o \
- pnode.o splice.o sync.o utimes.o \
+ pnode.o sync.o utimes.o \
stack.o fs_struct.o statfs.o fs_pin.o
ifeq ($(CONFIG_BLOCK),y)
@@ -22,6 +22,7 @@ endif
obj-$(CONFIG_PROC_FS) += proc_namespace.o
obj-$(CONFIG_FSNOTIFY) += notify/
+obj-$(CONFIG_SYSCALL_SPLICE) += splice.o
obj-$(CONFIG_EPOLL) += eventpoll.o
obj-$(CONFIG_ANON_INODES) += anon_inodes.o
obj-$(CONFIG_SIGNALFD) += signalfd.o
diff --git a/fs/splice.c b/fs/splice.c
index 7c4c695..44b201b 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -1316,7 +1316,6 @@ long do_splice_direct(struct file *in, loff_t *ppos, struct file *out,
return ret;
}
-#ifdef CONFIG_SYSCALL_SPLICE
static int splice_pipe_to_pipe(struct pipe_inode_info *ipipe,
struct pipe_inode_info *opipe,
size_t len, unsigned int flags);
@@ -2201,5 +2200,4 @@ COMPAT_SYSCALL_DEFINE4(sendfile64, int, out_fd, int, in_fd,
return do_sendfile(out_fd, in_fd, NULL, count, 0);
}
#endif
-#endif
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 04c0975..9b3054e 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2449,6 +2449,7 @@ extern void block_sync_page(struct page *page);
#define __splice_p(x) NULL
#endif
+#ifdef CONFIG_SYSCALL_SPLICE
/* fs/splice.c */
extern ssize_t generic_file_splice_read(struct file *, loff_t *,
struct pipe_inode_info *, size_t, unsigned int);
@@ -2458,6 +2459,31 @@ extern ssize_t iter_file_splice_write(struct pipe_inode_info *,
struct file *, loff_t *, size_t, unsigned int);
extern ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe,
struct file *out, loff_t *, size_t len, unsigned int flags);
+#else
+static inline ssize_t generic_file_splice_read(struct file *in, loff_t *ppos,
+ struct pipe_inode_info *pipe, size_t len, unsigned int flags)
+{
+ return -EPERM;
+}
+
+static inline ssize_t default_file_splice_read(struct file *in, loff_t *ppos,
+ struct pipe_inode_info *pipe, size_t len, unsigned int flags)
+{
+ return -EPERM;
+}
+
+static inline ssize_t iter_file_splice_write(struct pipe_inode_info *pipe,
+ struct file *out, loff_t *ppos, size_t len, unsigned int flags)
+{
+ return -EPERM;
+}
+
+static inline ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe,
+ struct file *out, loff_t *ppos, size_t len, unsigned int flags)
+{
+ return -EPERM;
+}
+#endif
extern void
file_ra_state_init(struct file_ra_state *ra, struct address_space *mapping);
diff --git a/include/linux/splice.h b/include/linux/splice.h
index da2751d..5097a79 100644
--- a/include/linux/splice.h
+++ b/include/linux/splice.h
@@ -65,6 +65,7 @@ typedef int (splice_actor)(struct pipe_inode_info *, struct pipe_buffer *,
typedef int (splice_direct_actor)(struct pipe_inode_info *,
struct splice_desc *);
+#ifdef CONFIG_SYSCALL_SPLICE
extern ssize_t splice_from_pipe(struct pipe_inode_info *, struct file *,
loff_t *, size_t, unsigned int,
splice_actor *);
@@ -74,13 +75,54 @@ extern ssize_t splice_to_pipe(struct pipe_inode_info *,
struct splice_pipe_desc *);
extern ssize_t splice_direct_to_actor(struct file *, struct splice_desc *,
splice_direct_actor *);
+#else /* #ifdef CONFIG_SYSCALL_SPLICE */
+static inline ssize_t splice_from_pipe(struct pipe_inode_info *pipe, struct file *out,
+ loff_t *ppos, size_t len, unsigned int flags,
+ splice_actor *actor)
+{
+ return -EPERM;
+}
+
+static inline ssize_t __splice_from_pipe(struct pipe_inode_info *pipe, struct splice_desc *sd,
+ splice_actor *actor)
+{
+ return -EPERM;
+}
+
+static inline ssize_t splice_to_pipe(struct pipe_inode_info *pipe,
+ struct splice_pipe_desc *spd)
+{
+ return -EPERM;
+}
+
+static inline ssize_t splice_direct_to_actor(struct file *in, struct splice_desc *sd,
+ splice_direct_actor *actor)
+{
+ return -EPERM;
+}
+#endif /* #ifdef CONFIG_SYSCALL_SPLICE */
/*
* for dynamic pipe sizing
*/
+#ifdef CONFIG_SYSCALL_SPLICE
extern int splice_grow_spd(const struct pipe_inode_info *, struct splice_pipe_desc *);
extern void splice_shrink_spd(struct splice_pipe_desc *);
extern void spd_release_page(struct splice_pipe_desc *, unsigned int);
+#else /* #ifdef CONFIG_SYSCALL_SPLICE */
+static inline int splice_grow_spd(const struct pipe_inode_info *pipe, struct splice_pipe_desc *spd)
+{
+ return -EPERM;
+}
+
+static inline void splice_shrink_spd(struct splice_pipe_desc *spd)
+{
+}
+
+static inline void spd_release_page(struct splice_pipe_desc *spd, unsigned int i)
+{
+}
+#endif /* #ifdef CONFIG_SYSCALL_SPLICE */
extern const struct pipe_buf_operations page_cache_pipe_buf_ops;
#endif
--
2.1.0
------------------------------------------------------------------------------
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration & more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
^ permalink raw reply related
* Re: [PATCH 0/6] kernel tinification: optionally compile out splice family of syscalls (splice, vmsplice, tee and sendfile)
From: David Miller @ 2014-11-23 18:46 UTC (permalink / raw)
To: pieter-qeJ+1H9vRZbz+pZb47iToQ
Cc: josh-iaAMLnmF4UmaiuxdJuQwMA,
alexander.h.duyck-ral2JQCrhuEAvxtiuMwx3w,
viro-RmSDqhL/yNMiFSDQTTA3OLVCufUGDwFn, ast-uqk4Ao+rVK5Wk0Htik3J/w,
akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b,
beber-2YnHqweIUXrk1uMJSBkQmQ,
catalina.mocanu-Re5JQEeQqe8AvxtiuMwx3w,
dborkman-H+wXaHxf7aLQT0dZR+AlfA, edumazet-hpIqsD4AKlfQT0dZR+AlfA,
ebiederm-aS9lmoZGLiVWk0Htik3J/w, fabf-AgBVmzD5pcezQB+pC5nmwQ,
fuse-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f,
geert-Td1EMuHUCqxL1ZNQvxDV9g, hughd-hpIqsD4AKlfQT0dZR+AlfA,
iulia.manda21-Re5JQEeQqe8AvxtiuMwx3w, JBeulich-IBi9RG/b67k,
bfields-uC3wQj2KruNg9hUCZPvPmw, jlayton-vpEMnDpepFuMZCB2o+C8xQ,
linux-api-u79uwXL29TY76Z2rM5mHXA,
linux-fsdevel-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, mcgrof-IBi9RG/b67k,
mattst88-Re5JQEeQqe8AvxtiuMwx3w, mgorman-l3A5Bk7waGM,
mst-H+wXaHxf7aLQT0dZR+AlfA, miklos-sUDqSbJrdHQHWmgEVkV9KA,
netdev-u79uwXL29TY76Z2rM5mHXA, oleg-H+wXaHxf7aLQT0dZR+AlfA,
Paul.Durrant-Sxgqhf6Nn4DQT0dZR+AlfA,
paulmck-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8,
pefoley2-lY0TAiDIAFlBDgjK7y7TUQ, tgraf-G/eBtMaohhA,
therbert-hpIqsD4AKlfQT0dZR+AlfA, willemb-hpIqsD4AKlfQT0dZR+AlfA,
xiaoguangrong-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8,
zhenglong.cai-TJRtMXcVgQTM1kAEIRd3EQ
In-Reply-To: <1416752468-1626-1-git-send-email-pieter-qeJ+1H9vRZbz+pZb47iToQ@public.gmane.org>
Truly removing sendfile/sendpage means that you can't even compile NFS
into the tree.
I cannot take this patch series seriously, sorry.
^ permalink raw reply
* Re: [PATCH 0/6] kernel tinification: optionally compile out splice family of syscalls (splice, vmsplice, tee and sendfile)
From: Josh Triplett @ 2014-11-23 19:43 UTC (permalink / raw)
To: David Miller
Cc: pieter-qeJ+1H9vRZbz+pZb47iToQ,
alexander.h.duyck-ral2JQCrhuEAvxtiuMwx3w,
viro-RmSDqhL/yNMiFSDQTTA3OLVCufUGDwFn, ast-uqk4Ao+rVK5Wk0Htik3J/w,
akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b,
beber-2YnHqweIUXrk1uMJSBkQmQ,
catalina.mocanu-Re5JQEeQqe8AvxtiuMwx3w,
dborkman-H+wXaHxf7aLQT0dZR+AlfA, edumazet-hpIqsD4AKlfQT0dZR+AlfA,
ebiederm-aS9lmoZGLiVWk0Htik3J/w, fabf-AgBVmzD5pcezQB+pC5nmwQ,
fuse-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f,
geert-Td1EMuHUCqxL1ZNQvxDV9g, hughd-hpIqsD4AKlfQT0dZR+AlfA,
iulia.manda21-Re5JQEeQqe8AvxtiuMwx3w, JBeulich-IBi9RG/b67k,
bfields-uC3wQj2KruNg9hUCZPvPmw, jlayton-vpEMnDpepFuMZCB2o+C8xQ,
linux-api-u79uwXL29TY76Z2rM5mHXA,
linux-fsdevel-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, mcgrof-IBi9RG/b67k,
mattst88-Re5JQEeQqe8AvxtiuMwx3w, mgorman-l3A5Bk7waGM,
mst-H+wXaHxf7aLQT0dZR+AlfA, miklos-sUDqSbJrdHQHWmgEVkV9KA,
netdev-u79uwXL29TY76Z2rM5mHXA, oleg-H+wXaHxf7aLQT0dZR+AlfA,
Paul.Durrant-Sxgqhf6Nn4DQT0dZR+AlfA,
paulmck-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8,
pefoley2-lY0TAiDIAFlBDgjK7y7TUQ, tgraf-G/eBtMaohhA,
therbert-hpIqsD4AKlfQT0dZR+AlfA, willemb-hpIqsD4AKlfQT0dZR+AlfA,
xiaoguangrong-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8,
zhenglong.cai-TJRtMXcVgQTM1kAEIRd3EQ
In-Reply-To: <20141123.134623.2061031332250984539.davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org>
On Sun, Nov 23, 2014 at 01:46:23PM -0500, David Miller wrote:
> Truly removing sendfile/sendpage means that you can't even compile NFS
> into the tree.
If you mean the in-kernel nfsd (CONFIG_NFSD), that already has a large
stack of "select" and "depends on", both directly and indirectly; adding
a "select SPLICE_SYSCALL" to it seems fine. (That select does need
adding, though. Pieter, you need to test-compile more than just
tinyconfig and defconfig. Try an allyesconfig with *just* splice turned
off, and make sure that compiles.)
Given the requirements of running a file server in the kernel, I'd
expect CONFIG_NFSD to end up with several more selects of optional
functionality in the future. It seems rather likely that the average
embedded system will be compiling out NFS. :)
Also, this patch series compiles out splice and sendfile, including
several *users* of sendpage; it doesn't compile out the sendpage
support/infrastructure itself.
- Josh Triplett
^ permalink raw reply
* Re: [PATCH 0/6] kernel tinification: optionally compile out splice family of syscalls (splice, vmsplice, tee and sendfile)
From: Pieter Smith @ 2014-11-23 20:30 UTC (permalink / raw)
To: Josh Triplett
Cc: David Miller, alexander.h.duyck, viro, ast, akpm, beber,
catalina.mocanu, dborkman, edumazet, ebiederm, fabf, fuse-devel,
geert, hughd, iulia.manda21, JBeulich, bfields, jlayton,
linux-api, linux-fsdevel, linux-kernel, mcgrof, mattst88, mgorman,
mst, miklos, netdev, oleg, Paul.Durrant, paulmck, pefoley2, tgraf,
therbert, willemb, xiaoguangrong, zhenglong.cai
In-Reply-To: <20141123194326.GB8517@thin>
On Sun, Nov 23, 2014 at 11:43:26AM -0800, Josh Triplett wrote:
> On Sun, Nov 23, 2014 at 01:46:23PM -0500, David Miller wrote:
> > Truly removing sendfile/sendpage means that you can't even compile NFS
> > into the tree.
>
> If you mean the in-kernel nfsd (CONFIG_NFSD), that already has a large
> stack of "select" and "depends on", both directly and indirectly; adding
> a "select SPLICE_SYSCALL" to it seems fine. (That select does need
> adding, though. Pieter, you need to test-compile more than just
> tinyconfig and defconfig. Try an allyesconfig with *just* splice turned
> off, and make sure that compiles.)
Did exacly that. Took forever on my hardware, but no problems.
> Given the requirements of running a file server in the kernel, I'd
> expect CONFIG_NFSD to end up with several more selects of optional
> functionality in the future. It seems rather likely that the average
> embedded system will be compiling out NFS. :)
>
> Also, this patch series compiles out splice and sendfile, including
> several *users* of sendpage; it doesn't compile out the sendpage
> support/infrastructure itself.
>
> - Josh Triplett
^ permalink raw reply
* Re: [fuse-devel] [PATCH 4/6] fs/fuse: support compiling out splice
From: Richard Weinberger @ 2014-11-23 22:29 UTC (permalink / raw)
To: Pieter Smith
Cc: Michael S. Tsirkin, Bertrand Jacquin, Oleg Nesterov,
J. Bruce Fields, Eric Dumazet, 蔡正龙,
Jeff Layton, Tom Herbert, Alexei Starovoitov, Miklos Szeredi,
Peter Foley, Hugh Dickins, Xiao Guangrong, Geert Uytterhoeven,
Mel Gorman, Matt Turner, Paul E. McKenney, Alexander Duyck,
open list:FUSE: FILESYSTEM..., Luis R. Rodriguez, Josh Triplett
In-Reply-To: <1416752468-1626-5-git-send-email-pieter-qeJ+1H9vRZbz+pZb47iToQ@public.gmane.org>
On Sun, Nov 23, 2014 at 3:20 PM, Pieter Smith <pieter-qeJ+1H9vRZbz+pZb47iToQ@public.gmane.org> wrote:
> To implement splice support, fs/fuse makes use of nosteal_pipe_buf_ops. This
> struct is exported by fs/splice. The goal of the larger patch set is to
> completely compile out fs/splice, so uses of the exported struct need to be
> compiled out along with fs/splice.
>
> This patch therefore compiles out splice support in fs/fuse when
> CONFIG_SYSCALL_SPLICE is undefined.
>
> Signed-off-by: Pieter Smith <pieter-qeJ+1H9vRZbz+pZb47iToQ@public.gmane.org>
> ---
> fs/fuse/dev.c | 4 ++--
> include/linux/fs.h | 6 ++++++
> 2 files changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
> index ca88731..f8f92a4 100644
> --- a/fs/fuse/dev.c
> +++ b/fs/fuse/dev.c
> @@ -1291,7 +1291,7 @@ static ssize_t fuse_dev_read(struct kiocb *iocb, const struct iovec *iov,
> return fuse_dev_do_read(fc, file, &cs, iov_length(iov, nr_segs));
> }
>
> -static ssize_t fuse_dev_splice_read(struct file *in, loff_t *ppos,
> +static ssize_t __maybe_unused fuse_dev_splice_read(struct file *in, loff_t *ppos,
> struct pipe_inode_info *pipe,
> size_t len, unsigned int flags)
> {
> @@ -2144,7 +2144,7 @@ const struct file_operations fuse_dev_operations = {
> .llseek = no_llseek,
> .read = do_sync_read,
> .aio_read = fuse_dev_read,
> - .splice_read = fuse_dev_splice_read,
> + .splice_read = __splice_p(fuse_dev_splice_read),
> .write = do_sync_write,
> .aio_write = fuse_dev_write,
> .splice_write = fuse_dev_splice_write,
> diff --git a/include/linux/fs.h b/include/linux/fs.h
> index a957d43..04c0975 100644
> --- a/include/linux/fs.h
> +++ b/include/linux/fs.h
> @@ -2443,6 +2443,12 @@ extern int blkdev_fsync(struct file *filp, loff_t start, loff_t end,
> int datasync);
> extern void block_sync_page(struct page *page);
>
> +#ifdef CONFIG_SYSCALL_SPLICE
> +#define __splice_p(x) x
> +#else
> +#define __splice_p(x) NULL
> +#endif
> +
This needs to go into a different patch.
One logical change per patch please. :-)
--
Thanks,
//richard
^ permalink raw reply
* Re: [fuse-devel] [PATCH 4/6] fs/fuse: support compiling out splice
From: Josh Triplett @ 2014-11-23 23:23 UTC (permalink / raw)
To: Richard Weinberger
Cc: Pieter Smith, Michael S. Tsirkin, Bertrand Jacquin, Oleg Nesterov,
J. Bruce Fields, Eric Dumazet, 蔡正龙,
Jeff Layton, Tom Herbert, Alexei Starovoitov, Miklos Szeredi,
Peter Foley, Hugh Dickins, Xiao Guangrong, Geert Uytterhoeven,
Mel Gorman, Matt Turner, Paul E. McKenney, Alexander Duyck,
open list:FUSE: FILESYSTEM..., Luis R. Rodriguez
In-Reply-To: <CAFLxGvxq3Mr9n8xMO_fPZDhrGmBh=WKyU0+RF13JBdjssX6qfw@mail.gmail.com>
On Sun, Nov 23, 2014 at 11:29:08PM +0100, Richard Weinberger wrote:
> On Sun, Nov 23, 2014 at 3:20 PM, Pieter Smith <pieter@boesman.nl> wrote:
> > To implement splice support, fs/fuse makes use of nosteal_pipe_buf_ops. This
> > struct is exported by fs/splice. The goal of the larger patch set is to
> > completely compile out fs/splice, so uses of the exported struct need to be
> > compiled out along with fs/splice.
> >
> > This patch therefore compiles out splice support in fs/fuse when
> > CONFIG_SYSCALL_SPLICE is undefined.
> >
> > Signed-off-by: Pieter Smith <pieter@boesman.nl>
> > ---
> > fs/fuse/dev.c | 4 ++--
> > include/linux/fs.h | 6 ++++++
> > 2 files changed, 8 insertions(+), 2 deletions(-)
> >
> > diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
> > index ca88731..f8f92a4 100644
> > --- a/fs/fuse/dev.c
> > +++ b/fs/fuse/dev.c
> > @@ -1291,7 +1291,7 @@ static ssize_t fuse_dev_read(struct kiocb *iocb, const struct iovec *iov,
> > return fuse_dev_do_read(fc, file, &cs, iov_length(iov, nr_segs));
> > }
> >
> > -static ssize_t fuse_dev_splice_read(struct file *in, loff_t *ppos,
> > +static ssize_t __maybe_unused fuse_dev_splice_read(struct file *in, loff_t *ppos,
> > struct pipe_inode_info *pipe,
> > size_t len, unsigned int flags)
> > {
> > @@ -2144,7 +2144,7 @@ const struct file_operations fuse_dev_operations = {
> > .llseek = no_llseek,
> > .read = do_sync_read,
> > .aio_read = fuse_dev_read,
> > - .splice_read = fuse_dev_splice_read,
> > + .splice_read = __splice_p(fuse_dev_splice_read),
> > .write = do_sync_write,
> > .aio_write = fuse_dev_write,
> > .splice_write = fuse_dev_splice_write,
> > diff --git a/include/linux/fs.h b/include/linux/fs.h
> > index a957d43..04c0975 100644
> > --- a/include/linux/fs.h
> > +++ b/include/linux/fs.h
> > @@ -2443,6 +2443,12 @@ extern int blkdev_fsync(struct file *filp, loff_t start, loff_t end,
> > int datasync);
> > extern void block_sync_page(struct page *page);
> >
> > +#ifdef CONFIG_SYSCALL_SPLICE
> > +#define __splice_p(x) x
> > +#else
> > +#define __splice_p(x) NULL
> > +#endif
> > +
>
> This needs to go into a different patch.
> One logical change per patch please. :-)
Easy enough to merge this one into the patch introducing
CONFIG_SYSCALL_SPLICE, then.
- Josh Triplett
^ permalink raw reply
* Re: [PATCH 0/6] kernel tinification: optionally compile out splice family of syscalls (splice, vmsplice, tee and sendfile)
From: Josh Triplett @ 2014-11-23 23:36 UTC (permalink / raw)
To: Pieter Smith
Cc: David Miller, alexander.h.duyck-ral2JQCrhuEAvxtiuMwx3w,
viro-RmSDqhL/yNMiFSDQTTA3OLVCufUGDwFn, ast-uqk4Ao+rVK5Wk0Htik3J/w,
akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b,
beber-2YnHqweIUXrk1uMJSBkQmQ,
catalina.mocanu-Re5JQEeQqe8AvxtiuMwx3w,
dborkman-H+wXaHxf7aLQT0dZR+AlfA, edumazet-hpIqsD4AKlfQT0dZR+AlfA,
ebiederm-aS9lmoZGLiVWk0Htik3J/w, fabf-AgBVmzD5pcezQB+pC5nmwQ,
fuse-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f,
geert-Td1EMuHUCqxL1ZNQvxDV9g, hughd-hpIqsD4AKlfQT0dZR+AlfA,
iulia.manda21-Re5JQEeQqe8AvxtiuMwx3w, JBeulich-IBi9RG/b67k,
bfields-uC3wQj2KruNg9hUCZPvPmw, jlayton-vpEMnDpepFuMZCB2o+C8xQ,
linux-api-u79uwXL29TY76Z2rM5mHXA,
linux-fsdevel-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, mcgrof-IBi9RG/b67k,
mattst88-Re5JQEeQqe8AvxtiuMwx3w, mgorman-l3A5Bk7waGM,
mst-H+wXaHxf7aLQT0dZR+AlfA, miklos-sUDqSbJrdHQHWmgEVkV9KA,
netdev-u79uwXL29TY76Z2rM5mHXA, oleg-H+wXaHxf7aLQT0dZR+AlfA,
Paul.Durrant-Sxgqhf6Nn4DQT0dZR+AlfA,
paulmck-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8,
pefoley2-lY0TAiDIAFlBDgjK7y7TUQ, tgraf-G/eBtMaohhA,
therbert-hpIqsD4AKlfQT0dZR+AlfA, willemb-hpIqsD4AKlfQT0dZR+AlfA,
xiaoguangrong-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8,
zhenglong.cai-TJRtMXcVgQTM1kAEIRd3EQ
In-Reply-To: <20141123203040.GB26749@smipidev>
On Sun, Nov 23, 2014 at 09:30:40PM +0100, Pieter Smith wrote:
> On Sun, Nov 23, 2014 at 11:43:26AM -0800, Josh Triplett wrote:
> > On Sun, Nov 23, 2014 at 01:46:23PM -0500, David Miller wrote:
> > > Truly removing sendfile/sendpage means that you can't even compile NFS
> > > into the tree.
> >
> > If you mean the in-kernel nfsd (CONFIG_NFSD), that already has a large
> > stack of "select" and "depends on", both directly and indirectly; adding
> > a "select SPLICE_SYSCALL" to it seems fine. (That select does need
> > adding, though. Pieter, you need to test-compile more than just
> > tinyconfig and defconfig. Try an allyesconfig with *just* splice turned
> > off, and make sure that compiles.)
>
> Did exacly that. Took forever on my hardware, but no problems.
Ah, I see. Looking more closely at nfsd, it looks like it already has a
code path for filesystems that don't do splice. I think, rather than
making nfsd select SPLICE_SYSCALL, that it would suffice to change the
"rqstp->rq_splice_ok = true;" in svc_process_common (net/sunrpc/svc.c)
to:
rqstp->rq_splice_ok = IS_ENABLED(CONFIG_SPLICE_SYSCALL);
Then nfsd should simply *always* fall back to its non-splice support.
That said, given that it seems exceedingly unlikely that anyone would
use the in-kernel nfsd on a system trying to minimize kernel size, it
still seems cleaner to just "select SPLICE_SYSCALL" from NFSD in
Kconfig. That avoids making any changes at all to the nfsd source in
this patch series.
- Josh Triplett
^ permalink raw reply
* Re: [PATCH 0/6] kernel tinification: optionally compile out splice family of syscalls (splice, vmsplice, tee and sendfile)
From: Jeff Layton @ 2014-11-24 0:28 UTC (permalink / raw)
To: Josh Triplett
Cc: Pieter Smith, David Miller, alexander.h.duyck, viro, ast, akpm,
beber, catalina.mocanu, dborkman, edumazet, ebiederm, fabf,
fuse-devel, geert, hughd, iulia.manda21, JBeulich, bfields,
linux-api, linux-fsdevel, linux-kernel, mcgrof, mattst88, mgorman,
mst, miklos, netdev, oleg, Paul.Durrant, paulmck, pefoley2, tgraf,
therbert, willemb, xiaoguangrong, zhenglong.cai
In-Reply-To: <20141123233637.GC12456@thin>
On Sun, 23 Nov 2014 15:36:37 -0800
Josh Triplett <josh@joshtriplett.org> wrote:
> On Sun, Nov 23, 2014 at 09:30:40PM +0100, Pieter Smith wrote:
> > On Sun, Nov 23, 2014 at 11:43:26AM -0800, Josh Triplett wrote:
> > > On Sun, Nov 23, 2014 at 01:46:23PM -0500, David Miller wrote:
> > > > Truly removing sendfile/sendpage means that you can't even compile NFS
> > > > into the tree.
> > >
> > > If you mean the in-kernel nfsd (CONFIG_NFSD), that already has a large
> > > stack of "select" and "depends on", both directly and indirectly; adding
> > > a "select SPLICE_SYSCALL" to it seems fine. (That select does need
> > > adding, though. Pieter, you need to test-compile more than just
> > > tinyconfig and defconfig. Try an allyesconfig with *just* splice turned
> > > off, and make sure that compiles.)
> >
> > Did exacly that. Took forever on my hardware, but no problems.
>
> Ah, I see. Looking more closely at nfsd, it looks like it already has a
> code path for filesystems that don't do splice. I think, rather than
> making nfsd select SPLICE_SYSCALL, that it would suffice to change the
> "rqstp->rq_splice_ok = true;" in svc_process_common (net/sunrpc/svc.c)
> to:
>
> rqstp->rq_splice_ok = IS_ENABLED(CONFIG_SPLICE_SYSCALL);
>
> Then nfsd should simply *always* fall back to its non-splice support.
>
I'd probably prefer the above, actually. We have to keep supporting
non-splice enabled fs' for the forseeable future, so we may as well
allow people to run nfsd in such configurations. It could even be
useful for testing the non-splice-enabled codepaths.
> That said, given that it seems exceedingly unlikely that anyone would
> use the in-kernel nfsd on a system trying to minimize kernel size, it
> still seems cleaner to just "select SPLICE_SYSCALL" from NFSD in
> Kconfig. That avoids making any changes at all to the nfsd source in
> this patch series.
>
--
Jeff Layton <jlayton@poochiereds.net>
^ permalink raw reply
* Re: [PATCH 0/6] kernel tinification: optionally compile out splice family of syscalls (splice, vmsplice, tee and sendfile)
From: Josh Triplett @ 2014-11-24 0:32 UTC (permalink / raw)
To: Jeff Layton
Cc: Pieter Smith, David Miller,
alexander.h.duyck-ral2JQCrhuEAvxtiuMwx3w,
viro-RmSDqhL/yNMiFSDQTTA3OLVCufUGDwFn, ast-uqk4Ao+rVK5Wk0Htik3J/w,
akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b,
beber-2YnHqweIUXrk1uMJSBkQmQ,
catalina.mocanu-Re5JQEeQqe8AvxtiuMwx3w,
dborkman-H+wXaHxf7aLQT0dZR+AlfA, edumazet-hpIqsD4AKlfQT0dZR+AlfA,
ebiederm-aS9lmoZGLiVWk0Htik3J/w, fabf-AgBVmzD5pcezQB+pC5nmwQ,
fuse-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f,
geert-Td1EMuHUCqxL1ZNQvxDV9g, hughd-hpIqsD4AKlfQT0dZR+AlfA,
iulia.manda21-Re5JQEeQqe8AvxtiuMwx3w, JBeulich-IBi9RG/b67k,
bfields-uC3wQj2KruNg9hUCZPvPmw, linux-api-u79uwXL29TY76Z2rM5mHXA,
linux-fsdevel-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, mcgrof-IBi9RG/b67k,
mattst88-Re5JQEeQqe8AvxtiuMwx3w, mgorman-l3A5Bk7waGM,
mst-H+wXaHxf7aLQT0dZR+AlfA, miklos-sUDqSbJrdHQHWmgEVkV9KA,
netdev-u79uwXL29TY76Z2rM5mHXA, oleg-H+wXaHxf7aLQT0dZR+AlfA,
Paul.Durrant-Sxgqhf6Nn4DQT0dZR+AlfA,
paulmck-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8,
pefoley2-lY0TAiDIAFlBDgjK7y7TUQ, tgraf-G/eBtMaohhA,
therbert-hpIqsD4AKlfQT0dZR+AlfA, willemb-hpIqsD4AKlfQT0dZR+AlfA,
xiaoguangrong-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8,
zhenglong.cai-TJRtMXcVgQTM1kAEIRd3EQ
In-Reply-To: <20141123192810.682a223e-9yPaYZwiELC+kQycOl6kW4xkIHaj4LzF@public.gmane.org>
On Sun, Nov 23, 2014 at 07:28:10PM -0500, Jeff Layton wrote:
> On Sun, 23 Nov 2014 15:36:37 -0800
> Josh Triplett <josh-iaAMLnmF4UmaiuxdJuQwMA@public.gmane.org> wrote:
>
> > On Sun, Nov 23, 2014 at 09:30:40PM +0100, Pieter Smith wrote:
> > > On Sun, Nov 23, 2014 at 11:43:26AM -0800, Josh Triplett wrote:
> > > > On Sun, Nov 23, 2014 at 01:46:23PM -0500, David Miller wrote:
> > > > > Truly removing sendfile/sendpage means that you can't even compile NFS
> > > > > into the tree.
> > > >
> > > > If you mean the in-kernel nfsd (CONFIG_NFSD), that already has a large
> > > > stack of "select" and "depends on", both directly and indirectly; adding
> > > > a "select SPLICE_SYSCALL" to it seems fine. (That select does need
> > > > adding, though. Pieter, you need to test-compile more than just
> > > > tinyconfig and defconfig. Try an allyesconfig with *just* splice turned
> > > > off, and make sure that compiles.)
> > >
> > > Did exacly that. Took forever on my hardware, but no problems.
> >
> > Ah, I see. Looking more closely at nfsd, it looks like it already has a
> > code path for filesystems that don't do splice. I think, rather than
> > making nfsd select SPLICE_SYSCALL, that it would suffice to change the
> > "rqstp->rq_splice_ok = true;" in svc_process_common (net/sunrpc/svc.c)
> > to:
> >
> > rqstp->rq_splice_ok = IS_ENABLED(CONFIG_SPLICE_SYSCALL);
> >
> > Then nfsd should simply *always* fall back to its non-splice support.
> >
>
> I'd probably prefer the above, actually. We have to keep supporting
> non-splice enabled fs' for the forseeable future, so we may as well
> allow people to run nfsd in such configurations. It could even be
> useful for testing the non-splice-enabled codepaths.
Good point!
- Josh Triplett
^ permalink raw reply
* [PATCH] media: platform: add VPFE capture driver support for AM437X
From: Lad, Prabhakar @ 2014-11-24 1:10 UTC (permalink / raw)
To: LMML, devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-api-u79uwXL29TY76Z2rM5mHXA, Hans Verkuil, Lad, Prabhakar
From: Benoit Parrot <bparrot-l0cyMroinI0@public.gmane.org>
This patch adds Video Processing Front End (VPFE) driver for
AM437X family of devices
Driver supports the following:
- V4L2 API using MMAP buffer access based on videobuf2 api
- Asynchronous sensor/decoder sub device registration
- DT support
Signed-off-by: Benoit Parrot <bparrot-l0cyMroinI0@public.gmane.org>
Signed-off-by: Darren Etheridge <detheridge-l0cyMroinI0@public.gmane.org>
Signed-off-by: Lad, Prabhakar <prabhakar.csengg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
.../devicetree/bindings/media/ti-am437xx-vpfe.txt | 61 +
MAINTAINERS | 9 +
drivers/media/platform/Kconfig | 1 +
drivers/media/platform/Makefile | 2 +
drivers/media/platform/am437x/Kconfig | 10 +
drivers/media/platform/am437x/Makefile | 2 +
drivers/media/platform/am437x/vpfe.c | 2764 ++++++++++++++++++++
drivers/media/platform/am437x/vpfe.h | 286 ++
drivers/media/platform/am437x/vpfe_regs.h | 140 +
include/uapi/linux/Kbuild | 1 +
include/uapi/linux/am437x_vpfe.h | 122 +
11 files changed, 3398 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/ti-am437xx-vpfe.txt
create mode 100644 drivers/media/platform/am437x/Kconfig
create mode 100644 drivers/media/platform/am437x/Makefile
create mode 100644 drivers/media/platform/am437x/vpfe.c
create mode 100644 drivers/media/platform/am437x/vpfe.h
create mode 100644 drivers/media/platform/am437x/vpfe_regs.h
create mode 100644 include/uapi/linux/am437x_vpfe.h
diff --git a/Documentation/devicetree/bindings/media/ti-am437xx-vpfe.txt b/Documentation/devicetree/bindings/media/ti-am437xx-vpfe.txt
new file mode 100644
index 0000000..3932e76
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/ti-am437xx-vpfe.txt
@@ -0,0 +1,61 @@
+Texas Instruments AM437x CAMERA (VPFE)
+--------------------------------------
+
+The Video Processing Front End (VPFE) is a key component for image capture
+applications. The capture module provides the system interface and the
+processing capability to connect RAW image-sensor modules and video decoders
+to the AM437x device.
+
+Required properties:
+- compatible: must be "ti,am437x-vpfe"
+- reg: physical base address and length of the registers set for the device;
+- interrupts: should contain IRQ line for the VPFE;
+- ti,am437x-vpfe-interface: can be one of the following,
+ 0 - Raw Bayer Interface.
+ 1 - 8 Bit BT656 Interface.
+ 2 - 10 Bit BT656 Interface.
+ 3 - YCbCr 8 Bit Interface.
+ 4 - YCbCr 16 Bit Interface.
+
+VPFE supports a single port node with parallel bus. It should contain one
+'port' child node with child 'endpoint' node. Please refer to the bindings
+defined in Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+ vpfe: vpfe@f0034000 {
+ compatible = "ti,am437x-vpfe";
+ reg = <0x48328000 0x2000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&vpfe_pins_default>;
+ pinctrl-1 = <&vpfe_pins_sleep>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vpfe0_ep: endpoint {
+ remote-endpoint = <&ov2659_1>;
+ ti,am437x-vpfe-interface = <0>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+ };
+
+ i2c1: i2c@4802a000 {
+
+ ov2659@30 {
+ compatible = "ti,ov2659";
+ reg = <0x30>;
+
+ port {
+ ov2659_1: endpoint {
+ remote-endpoint = <&vpfe0_ep>;
+ bus-width = <8>;
+ mclk-frequency = <12000000>;
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index a6288ca..a42d367 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8537,6 +8537,15 @@ S: Maintained
F: drivers/media/platform/davinci/
F: include/media/davinci/
+TI AM437X VPFE DRIVER
+M: Lad, Prabhakar <prabhakar.csengg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+L: linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
+W: http://linuxtv.org/
+Q: http://patchwork.linuxtv.org/project/linux-media/list/
+T: git git://linuxtv.org/mhadli/v4l-dvb-davinci_devices.git
+S: Maintained
+F: drivers/media/platform/am437x/
+
SIS 190 ETHERNET DRIVER
M: Francois Romieu <romieu-W8zweXLXuWQS+FvcfC7Uqw@public.gmane.org>
L: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index 0c61155..6d94045 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -126,6 +126,7 @@ config VIDEO_S3C_CAMIF
source "drivers/media/platform/soc_camera/Kconfig"
source "drivers/media/platform/exynos4-is/Kconfig"
source "drivers/media/platform/s5p-tv/Kconfig"
+source "drivers/media/platform/am437x/Kconfig"
endif # V4L_PLATFORM_DRIVERS
diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
index b818afb..7bb6d46 100644
--- a/drivers/media/platform/Makefile
+++ b/drivers/media/platform/Makefile
@@ -49,4 +49,6 @@ obj-$(CONFIG_VIDEO_RENESAS_VSP1) += vsp1/
obj-y += omap/
+obj-$(CONFIG_VIDEO_AM437X_VPFE) += am437x/
+
ccflags-y += -I$(srctree)/drivers/media/i2c
diff --git a/drivers/media/platform/am437x/Kconfig b/drivers/media/platform/am437x/Kconfig
new file mode 100644
index 0000000..a3d4bb3
--- /dev/null
+++ b/drivers/media/platform/am437x/Kconfig
@@ -0,0 +1,10 @@
+config VIDEO_AM437X_VPFE
+ tristate "TI AM437x VPFE video capture driver"
+ depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && SOC_AM43XX
+ select VIDEOBUF2_DMA_CONTIG
+ help
+ Support for AM437x Video Processing Front End based Video
+ Capture Driver.
+
+ To compile this driver as a module, choose M here. The module
+ will be called ti_vpfe.
diff --git a/drivers/media/platform/am437x/Makefile b/drivers/media/platform/am437x/Makefile
new file mode 100644
index 0000000..94ffaa0
--- /dev/null
+++ b/drivers/media/platform/am437x/Makefile
@@ -0,0 +1,2 @@
+ti-vpfe-y := vpfe.o
+obj-$(CONFIG_VIDEO_AM437X_VPFE) += ti-vpfe.o
diff --git a/drivers/media/platform/am437x/vpfe.c b/drivers/media/platform/am437x/vpfe.c
new file mode 100644
index 0000000..ee0cafe
--- /dev/null
+++ b/drivers/media/platform/am437x/vpfe.c
@@ -0,0 +1,2764 @@
+/*
+ * TI VPFE capture Driver
+ *
+ * Copyright (C) 2013 - 2014 Texas Instruments, Inc.
+ *
+ * Benoit Parrot <bparrot-l0cyMroinI0@public.gmane.org>
+ * Lad, Prabhakar <prabhakar.csengg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/videodev2.h>
+
+#include <media/v4l2-common.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-of.h>
+
+#include "vpfe.h"
+
+#define VPFE_MODULE_NAME "vpfe"
+#define VPFE_VERSION "0.1.0"
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Debug level 0-8");
+
+#define vpfe_dbg(level, dev, fmt, arg...) \
+ v4l2_dbg(level, debug, &dev->v4l2_dev, fmt, ##arg)
+#define vpfe_info(dev, fmt, arg...) \
+ v4l2_info(&dev->v4l2_dev, fmt, ##arg)
+#define vpfe_err(dev, fmt, arg...) \
+ v4l2_err(&dev->v4l2_dev, fmt, ##arg)
+
+/* standard information */
+struct vpfe_standard {
+ v4l2_std_id std_id;
+ unsigned int width;
+ unsigned int height;
+ struct v4l2_fract pixelaspect;
+ int frame_format;
+};
+
+const struct vpfe_standard vpfe_standards[] = {
+ {V4L2_STD_525_60, 720, 480, {11, 10}, 1},
+ {V4L2_STD_625_50, 720, 576, {54, 59}, 1},
+};
+
+struct bus_format {
+ unsigned int width;
+ unsigned int bpp;
+};
+
+/*
+ * struct vpfe_fmt - VPFE media bus format information
+ * @name: V4L2 format description
+ * @code: V4L2 media bus format code
+ * @shifted: V4L2 media bus format code for the same pixel layout but
+ * shifted to be 8 bits per pixel. =0 if format is not shiftable.
+ * @pixelformat: V4L2 pixel format FCC identifier
+ * @width: Bits per pixel (when transferred over a bus)
+ * @bpp: Bytes per pixel (when stored in memory)
+ */
+struct vpfe_fmt {
+ const char *name;
+ u32 fourcc;
+ u32 code;
+ struct bus_format l;
+ struct bus_format s;
+};
+
+static struct vpfe_fmt formats[] = {
+ {
+ .name = "YUV 4:2:2 packed, YCbYCr",
+ .fourcc = V4L2_PIX_FMT_YUYV,
+ .code = MEDIA_BUS_FMT_YUYV8_2X8,
+ .l.width = 10,
+ .l.bpp = 4,
+ .s.width = 8,
+ .s.bpp = 2,
+ }, {
+ .name = "YUV 4:2:2 packed, CbYCrY",
+ .fourcc = V4L2_PIX_FMT_UYVY,
+ .code = MEDIA_BUS_FMT_UYVY8_2X8,
+ .l.width = 10,
+ .l.bpp = 4,
+ .s.width = 8,
+ .s.bpp = 2,
+ }, {
+ .name = "YUV 4:2:2 packed, YCrYCb",
+ .fourcc = V4L2_PIX_FMT_YVYU,
+ .code = MEDIA_BUS_FMT_YVYU8_2X8,
+ .l.width = 10,
+ .l.bpp = 4,
+ .s.width = 8,
+ .s.bpp = 2,
+ }, {
+ .name = "YUV 4:2:2 packed, CrYCbY",
+ .fourcc = V4L2_PIX_FMT_VYUY,
+ .code = MEDIA_BUS_FMT_VYUY8_2X8,
+ .l.width = 10,
+ .l.bpp = 4,
+ .s.width = 8,
+ .s.bpp = 2,
+ }, {
+ .name = "RAW8 BGGR",
+ .fourcc = V4L2_PIX_FMT_SBGGR8,
+ .code = MEDIA_BUS_FMT_SBGGR8_1X8,
+ .l.width = 10,
+ .l.bpp = 2,
+ .s.width = 8,
+ .s.bpp = 1,
+ }, {
+ .name = "RAW8 GBRG",
+ .fourcc = V4L2_PIX_FMT_SGBRG8,
+ .code = MEDIA_BUS_FMT_SGBRG8_1X8,
+ .l.width = 10,
+ .l.bpp = 2,
+ .s.width = 8,
+ .s.bpp = 1,
+ }, {
+ .name = "RAW8 GRBG",
+ .fourcc = V4L2_PIX_FMT_SGRBG8,
+ .code = MEDIA_BUS_FMT_SGRBG8_1X8,
+ .l.width = 10,
+ .l.bpp = 2,
+ .s.width = 8,
+ .s.bpp = 1,
+ }, {
+ .name = "RAW8 RGGB",
+ .fourcc = V4L2_PIX_FMT_SRGGB8,
+ .code = MEDIA_BUS_FMT_SRGGB8_1X8,
+ .l.width = 10,
+ .l.bpp = 2,
+ .s.width = 8,
+ .s.bpp = 1,
+ }, {
+ .name = "RGB565 (LE)",
+ .fourcc = V4L2_PIX_FMT_RGB565,
+ .code = MEDIA_BUS_FMT_RGB565_2X8_LE,
+ .l.width = 10,
+ .l.bpp = 4,
+ .s.width = 8,
+ .s.bpp = 2,
+ }, {
+ .name = "RGB565 (BE)",
+ .fourcc = V4L2_PIX_FMT_RGB565X,
+ .code = MEDIA_BUS_FMT_RGB565_2X8_BE,
+ .l.width = 10,
+ .l.bpp = 4,
+ .s.width = 8,
+ .s.bpp = 2,
+ },
+};
+
+static int
+__vpfe_get_format(struct vpfe_device *dev,
+ struct v4l2_format *format, unsigned int *bpp);
+
+static struct vpfe_fmt *find_format_by_code(unsigned int code)
+{
+ struct vpfe_fmt *fmt;
+ unsigned int k;
+
+ for (k = 0; k < ARRAY_SIZE(formats); k++) {
+ fmt = &formats[k];
+ if (fmt->code == code)
+ return fmt;
+ }
+
+ return NULL;
+}
+
+static struct vpfe_fmt *find_format_by_pix(unsigned int pixelformat)
+{
+ struct vpfe_fmt *fmt;
+ unsigned int k;
+
+ for (k = 0; k < ARRAY_SIZE(formats); k++) {
+ fmt = &formats[k];
+ if (fmt->fourcc == pixelformat)
+ return fmt;
+ }
+
+ return NULL;
+}
+
+static void
+mbus_to_pix(struct vpfe_device *dev,
+ const struct v4l2_mbus_framefmt *mbus,
+ struct v4l2_pix_format *pix, unsigned int *bpp)
+{
+ struct vpfe_subdev_info *sdinfo = dev->current_subdev;
+ unsigned int bus_width = sdinfo->vpfe_param.bus_width;
+ struct vpfe_fmt *fmt;
+
+ memset(pix, 0, sizeof(*pix));
+ pix->width = mbus->width;
+ pix->height = mbus->height;
+
+ fmt = find_format_by_code(mbus->code);
+ if (WARN_ON(fmt == NULL)) {
+ pr_err("Invalid mbus code set\n");
+ *bpp = 1;
+ return;
+ }
+
+ pix->colorspace = mbus->colorspace;
+ pix->field = mbus->field;
+ pix->pixelformat = fmt->fourcc;
+ *bpp = (bus_width == 10) ? fmt->l.bpp : fmt->s.bpp;
+
+ pix->bytesperline = pix->width * *bpp;
+ /* pitch should be 32 bytes aligned */
+ pix->bytesperline = ALIGN(pix->bytesperline, 32);
+ pix->sizeimage = pix->bytesperline * pix->height;
+}
+
+static int
+pix_to_mbus(struct vpfe_device *dev,
+ struct v4l2_pix_format *pix,
+ struct v4l2_mbus_framefmt *mbus)
+{
+ struct vpfe_fmt *fmt;
+
+ memset(mbus, 0, sizeof(*mbus));
+ mbus->width = pix->width;
+ mbus->height = pix->height;
+
+ fmt = find_format_by_pix(pix->pixelformat);
+ if (!fmt) {
+ /* default to first entry */
+ vpfe_dbg(3, dev, "Invalid pixel code: %x, default used instead\n",
+ pix->pixelformat);
+ fmt = &formats[0];
+ }
+
+ mbus->code = fmt->code;
+ mbus->colorspace = pix->colorspace;
+ mbus->field = pix->field;
+
+ return 0;
+}
+
+/* Print Four-character-code (FOURCC) */
+static char *print_fourcc(u32 fmt)
+{
+ static char code[5];
+
+ code[0] = (unsigned char)(fmt & 0xff);
+ code[1] = (unsigned char)((fmt>>8) & 0xff);
+ code[2] = (unsigned char)((fmt>>16) & 0xff);
+ code[3] = (unsigned char)((fmt>>24) & 0xff);
+ code[4] = '\0';
+
+ return code;
+}
+
+static int
+cmp_v4l2_format(const struct v4l2_format *lhs, const struct v4l2_format *rhs)
+{
+ return lhs->type == rhs->type &&
+ lhs->fmt.pix.width == rhs->fmt.pix.width &&
+ lhs->fmt.pix.height == rhs->fmt.pix.height &&
+ lhs->fmt.pix.pixelformat == rhs->fmt.pix.pixelformat &&
+ lhs->fmt.pix.field == rhs->fmt.pix.field &&
+ lhs->fmt.pix.colorspace == rhs->fmt.pix.colorspace;
+}
+
+static inline u32 vpfe_reg_read(struct vpfe_ccdc *ccdc, u32 offset)
+{
+ return ioread32(ccdc->ccdc_cfg.base_addr + offset);
+}
+
+static inline void vpfe_reg_write(struct vpfe_ccdc *ccdc, u32 val, u32 offset)
+{
+ iowrite32(val, ccdc->ccdc_cfg.base_addr + offset);
+}
+
+static inline struct vpfe_device *to_vpfe(struct vpfe_ccdc *ccdc)
+{
+ return container_of(ccdc, struct vpfe_device, ccdc);
+}
+
+static inline struct vpfe_cap_buffer *to_vpfe_buffer(struct vb2_buffer *vb)
+{
+ return container_of(vb, struct vpfe_cap_buffer, vb);
+}
+
+static inline void vpfe_pcr_enable(struct vpfe_ccdc *ccdc, int flag)
+{
+ vpfe_reg_write(ccdc, !!flag, VPFE_PCR);
+}
+
+static void vpfe_config_enable(struct vpfe_ccdc *ccdc, int flag)
+{
+ unsigned int cfg;
+
+ if (!flag) {
+ cfg = vpfe_reg_read(ccdc, VPFE_CONFIG);
+ cfg &= ~(VPFE_CONFIG_EN_ENABLE << VPFE_CONFIG_EN_SHIFT);
+ } else {
+ cfg = VPFE_CONFIG_EN_ENABLE << VPFE_CONFIG_EN_SHIFT;
+ }
+
+ vpfe_reg_write(ccdc, cfg, VPFE_CONFIG);
+}
+
+static void vpfe_ccdc_setwin(struct vpfe_ccdc *ccdc,
+ struct v4l2_rect *image_win,
+ enum ccdc_frmfmt frm_fmt,
+ int bpp)
+{
+ int horz_start, horz_nr_pixels;
+ int vert_start, vert_nr_lines;
+ int val, mid_img;
+
+ /*
+ * ppc - per pixel count. indicates how many pixels per cell
+ * output to SDRAM. example, for ycbcr, it is one y and one c, so 2.
+ * raw capture this is 1
+ */
+ horz_start = image_win->left * bpp;
+ horz_nr_pixels = (image_win->width * bpp) - 1;
+ vpfe_reg_write(ccdc, (horz_start << VPFE_HORZ_INFO_SPH_SHIFT) |
+ horz_nr_pixels, VPFE_HORZ_INFO);
+
+ vert_start = image_win->top;
+
+ if (frm_fmt == CCDC_FRMFMT_INTERLACED) {
+ vert_nr_lines = (image_win->height >> 1) - 1;
+ vert_start >>= 1;
+ /* Since first line doesn't have any data */
+ vert_start += 1;
+ /* configure VDINT0 */
+ val = (vert_start << VPFE_VDINT_VDINT0_SHIFT);
+ } else {
+ /* Since first line doesn't have any data */
+ vert_start += 1;
+ vert_nr_lines = image_win->height - 1;
+ /*
+ * configure VDINT0 and VDINT1. VDINT1 will be at half
+ * of image height
+ */
+ mid_img = vert_start + (image_win->height / 2);
+ val = (vert_start << VPFE_VDINT_VDINT0_SHIFT) |
+ (mid_img & VPFE_VDINT_VDINT1_MASK);
+ }
+
+ vpfe_reg_write(ccdc, val, VPFE_VDINT);
+
+ vpfe_reg_write(ccdc, (vert_start << VPFE_VERT_START_SLV0_SHIFT) |
+ vert_start, VPFE_VERT_START);
+ vpfe_reg_write(ccdc, vert_nr_lines, VPFE_VERT_LINES);
+}
+
+static void vpfe_reg_dump(struct vpfe_ccdc *ccdc)
+{
+ struct vpfe_device *dev = to_vpfe(ccdc);
+
+ vpfe_dbg(3, dev, "ALAW: 0x%x\n", vpfe_reg_read(ccdc, VPFE_ALAW));
+ vpfe_dbg(3, dev, "CLAMP: 0x%x\n", vpfe_reg_read(ccdc, VPFE_CLAMP));
+ vpfe_dbg(3, dev, "DCSUB: 0x%x\n", vpfe_reg_read(ccdc, VPFE_DCSUB));
+ vpfe_dbg(3, dev, "BLKCMP: 0x%x\n", vpfe_reg_read(ccdc, VPFE_BLKCMP));
+ vpfe_dbg(3, dev, "COLPTN: 0x%x\n", vpfe_reg_read(ccdc, VPFE_COLPTN));
+ vpfe_dbg(3, dev, "SDOFST: 0x%x\n", vpfe_reg_read(ccdc, VPFE_SDOFST));
+ vpfe_dbg(3, dev, "SYN_MODE: 0x%x\n", vpfe_reg_read(ccdc, VPFE_SYNMODE));
+ vpfe_dbg(3, dev, "HSIZE_OFF: 0x%x\n",
+ vpfe_reg_read(ccdc, VPFE_HSIZE_OFF));
+ vpfe_dbg(3, dev, "HORZ_INFO: 0x%x\n",
+ vpfe_reg_read(ccdc, VPFE_HORZ_INFO));
+ vpfe_dbg(3, dev, "VERT_START: 0x%x\n",
+ vpfe_reg_read(ccdc, VPFE_VERT_START));
+ vpfe_dbg(3, dev, "VERT_LINES: 0x%x\n",
+ vpfe_reg_read(ccdc, VPFE_VERT_LINES));
+}
+
+static int
+vpfe_ccdc_validate_param(struct vpfe_ccdc *ccdc,
+ struct vpfe_ccdc_config_params_raw *ccdcparam)
+{
+ struct vpfe_device *dev = to_vpfe(ccdc);
+ u8 max_gamma, max_data;
+
+ if (!ccdcparam->alaw.enable)
+ return 0;
+
+ max_gamma = ccdc_gamma_width_max_bit(ccdcparam->alaw.gamma_wd);
+ max_data = ccdc_data_size_max_bit(ccdcparam->data_sz);
+
+ if (ccdcparam->alaw.gamma_wd > VPFE_CCDC_GAMMA_BITS_09_0 ||
+ ccdcparam->alaw.gamma_wd < VPFE_CCDC_GAMMA_BITS_15_6 ||
+ max_gamma > max_data) {
+ vpfe_dbg(1, dev, "\nInvalid data line select");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int
+vpfe_ccdc_update_raw_params(struct vpfe_ccdc *ccdc,
+ struct vpfe_ccdc_config_params_raw *raw_params)
+{
+ struct vpfe_ccdc_config_params_raw *config_params =
+ &ccdc->ccdc_cfg.bayer.config_params;
+
+ memcpy(config_params, raw_params, sizeof(*raw_params));
+
+ return 0;
+}
+
+/*
+ * vpfe_ccdc_restore_defaults()
+ * This function will write defaults to all CCDC registers
+ */
+static void vpfe_ccdc_restore_defaults(struct vpfe_ccdc *ccdc)
+{
+ int i;
+
+ /* Disable CCDC */
+ vpfe_pcr_enable(ccdc, 0);
+
+ /* set all registers to default value */
+ for (i = 4; i <= 0x94; i += 4)
+ vpfe_reg_write(ccdc, 0, i);
+
+ vpfe_reg_write(ccdc, VPFE_NO_CULLING, VPFE_CULLING);
+ vpfe_reg_write(ccdc, VPFE_CCDC_GAMMA_BITS_11_2, VPFE_ALAW);
+}
+
+static int vpfe_ccdc_close(struct vpfe_ccdc *ccdc, struct device *dev)
+{
+ int dma_cntl, i, pcr;
+
+ /* If the CCDC module is still busy wait for it to be done */
+ for (i = 0; i < 10; i++) {
+ usleep_range(5000, 6000);
+ pcr = vpfe_reg_read(ccdc, VPFE_PCR);
+ if (!pcr)
+ break;
+
+ /* make sure it it is disabled */
+ vpfe_pcr_enable(ccdc, 0);
+ }
+
+ /* Disable CCDC by resetting all register to default POR values */
+ vpfe_ccdc_restore_defaults(ccdc);
+
+ /* if DMA_CNTL overflow bit is set. Clear it
+ * It appears to take a while for this to become quiescent ~20ms
+ */
+ for (i = 0; i < 10; i++) {
+ dma_cntl = vpfe_reg_read(ccdc, VPFE_DMA_CNTL);
+ if (!(dma_cntl & VPFE_DMA_CNTL_OVERFLOW))
+ break;
+
+ /* Clear the overflow bit */
+ vpfe_reg_write(ccdc, dma_cntl, VPFE_DMA_CNTL);
+ usleep_range(5000, 6000);
+ }
+
+ /* Disabled the module at the CONFIG level */
+ vpfe_config_enable(ccdc, 0);
+
+ pm_runtime_put_sync(dev);
+
+ return 0;
+}
+
+static int vpfe_ccdc_set_params(struct vpfe_ccdc *ccdc, void __user *params)
+{
+ struct vpfe_device *vpfe = container_of(ccdc, struct vpfe_device, ccdc);
+ struct vpfe_ccdc_config_params_raw raw_params;
+ int x;
+
+ if (ccdc->ccdc_cfg.if_type != VPFE_RAW_BAYER)
+ return -EINVAL;
+
+ x = copy_from_user(&raw_params, params, sizeof(raw_params));
+ if (x) {
+ vpfe_dbg(1, vpfe,
+ "vpfe_ccdc_set_params: error in copying ccdc params, %d\n",
+ x);
+ return -EFAULT;
+ }
+
+ if (!vpfe_ccdc_validate_param(ccdc, &raw_params)) {
+ if (!vpfe_ccdc_update_raw_params(ccdc, &raw_params))
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+/*
+ * vpfe_ccdc_config_ycbcr()
+ * This function will configure CCDC for YCbCr video capture
+ */
+static void vpfe_ccdc_config_ycbcr(struct vpfe_ccdc *ccdc)
+{
+ struct vpfe_device *vpfe = container_of(ccdc, struct vpfe_device, ccdc);
+ struct ccdc_params_ycbcr *params = &ccdc->ccdc_cfg.ycbcr;
+ u32 syn_mode;
+
+ vpfe_dbg(3, vpfe, "vpfe_ccdc_config_ycbcr:\n");
+ /*
+ * first restore the CCDC registers to default values
+ * This is important since we assume default values to be set in
+ * a lot of registers that we didn't touch
+ */
+ vpfe_ccdc_restore_defaults(ccdc);
+
+ /*
+ * configure pixel format, frame format, configure video frame
+ * format, enable output to SDRAM, enable internal timing generator
+ * and 8bit pack mode
+ */
+ syn_mode = (((params->pix_fmt & VPFE_SYN_MODE_INPMOD_MASK) <<
+ VPFE_SYN_MODE_INPMOD_SHIFT) |
+ ((params->frm_fmt & VPFE_SYN_FLDMODE_MASK) <<
+ VPFE_SYN_FLDMODE_SHIFT) | VPFE_VDHDEN_ENABLE |
+ VPFE_WEN_ENABLE | VPFE_DATA_PACK_ENABLE);
+
+ /* setup BT.656 sync mode */
+ if (params->bt656_enable) {
+ vpfe_reg_write(ccdc, VPFE_REC656IF_BT656_EN, VPFE_REC656IF);
+
+ /*
+ * configure the FID, VD, HD pin polarity,
+ * fld,hd pol positive, vd negative, 8-bit data
+ */
+ syn_mode |= VPFE_SYN_MODE_VD_POL_NEGATIVE;
+ if (ccdc->ccdc_cfg.if_type == VPFE_BT656_10BIT)
+ syn_mode |= VPFE_SYN_MODE_10BITS;
+ else
+ syn_mode |= VPFE_SYN_MODE_8BITS;
+ } else {
+ /* y/c external sync mode */
+ syn_mode |= (((params->fid_pol & VPFE_FID_POL_MASK) <<
+ VPFE_FID_POL_SHIFT) |
+ ((params->hd_pol & VPFE_HD_POL_MASK) <<
+ VPFE_HD_POL_SHIFT) |
+ ((params->vd_pol & VPFE_VD_POL_MASK) <<
+ VPFE_VD_POL_SHIFT));
+ }
+ vpfe_reg_write(ccdc, syn_mode, VPFE_SYNMODE);
+
+ /* configure video window */
+ vpfe_ccdc_setwin(ccdc, ¶ms->win,
+ params->frm_fmt, params->bytesperpixel);
+
+ /*
+ * configure the order of y cb cr in SDRAM, and disable latch
+ * internal register on vsync
+ */
+ if (ccdc->ccdc_cfg.if_type == VPFE_BT656_10BIT)
+ vpfe_reg_write(ccdc,
+ (params->pix_order << VPFE_CCDCFG_Y8POS_SHIFT) |
+ VPFE_LATCH_ON_VSYNC_DISABLE |
+ VPFE_CCDCFG_BW656_10BIT, VPFE_CCDCFG);
+ else
+ vpfe_reg_write(ccdc,
+ (params->pix_order << VPFE_CCDCFG_Y8POS_SHIFT) |
+ VPFE_LATCH_ON_VSYNC_DISABLE, VPFE_CCDCFG);
+
+ /*
+ * configure the horizontal line offset. This should be a
+ * on 32 byte boundary. So clear LSB 5 bits
+ */
+ vpfe_reg_write(ccdc, params->bytesperline, VPFE_HSIZE_OFF);
+
+ /* configure the memory line offset */
+ if (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED)
+ /* two fields are interleaved in memory */
+ vpfe_reg_write(ccdc, VPFE_SDOFST_FIELD_INTERLEAVED,
+ VPFE_SDOFST);
+}
+
+static void
+vpfe_ccdc_config_black_clamp(struct vpfe_ccdc *ccdc,
+ struct vpfe_ccdc_black_clamp *bclamp)
+{
+ u32 val;
+
+ if (!bclamp->enable) {
+ /* configure DCSub */
+ val = (bclamp->dc_sub) & VPFE_BLK_DC_SUB_MASK;
+ vpfe_reg_write(ccdc, val, VPFE_DCSUB);
+ vpfe_reg_write(ccdc, VPFE_CLAMP_DEFAULT_VAL, VPFE_CLAMP);
+ return;
+ }
+ /*
+ * Configure gain, Start pixel, No of line to be avg,
+ * No of pixel/line to be avg, & Enable the Black clamping
+ */
+ val = ((bclamp->sgain & VPFE_BLK_SGAIN_MASK) |
+ ((bclamp->start_pixel & VPFE_BLK_ST_PXL_MASK) <<
+ VPFE_BLK_ST_PXL_SHIFT) |
+ ((bclamp->sample_ln & VPFE_BLK_SAMPLE_LINE_MASK) <<
+ VPFE_BLK_SAMPLE_LINE_SHIFT) |
+ ((bclamp->sample_pixel & VPFE_BLK_SAMPLE_LN_MASK) <<
+ VPFE_BLK_SAMPLE_LN_SHIFT) | VPFE_BLK_CLAMP_ENABLE);
+ vpfe_reg_write(ccdc, val, VPFE_CLAMP);
+ /* If Black clamping is enable then make dcsub 0 */
+ vpfe_reg_write(ccdc, VPFE_DCSUB_DEFAULT_VAL, VPFE_DCSUB);
+}
+
+static void
+vpfe_ccdc_config_black_compense(struct vpfe_ccdc *ccdc,
+ struct vpfe_ccdc_black_compensation *bcomp)
+{
+ u32 val;
+
+ val = ((bcomp->b & VPFE_BLK_COMP_MASK) |
+ ((bcomp->gb & VPFE_BLK_COMP_MASK) <<
+ VPFE_BLK_COMP_GB_COMP_SHIFT) |
+ ((bcomp->gr & VPFE_BLK_COMP_MASK) <<
+ VPFE_BLK_COMP_GR_COMP_SHIFT) |
+ ((bcomp->r & VPFE_BLK_COMP_MASK) <<
+ VPFE_BLK_COMP_R_COMP_SHIFT));
+ vpfe_reg_write(ccdc, val, VPFE_BLKCMP);
+}
+
+/*
+ * vpfe_ccdc_config_raw()
+ * This function will configure CCDC for Raw capture mode
+ */
+static void vpfe_ccdc_config_raw(struct vpfe_ccdc *ccdc)
+{
+ struct vpfe_device *dev = container_of(ccdc, struct vpfe_device, ccdc);
+ struct vpfe_ccdc_config_params_raw *config_params =
+ &ccdc->ccdc_cfg.bayer.config_params;
+ struct ccdc_params_raw *params = &ccdc->ccdc_cfg.bayer;
+ unsigned int syn_mode;
+ unsigned int val;
+
+ vpfe_dbg(3, dev, "vpfe_ccdc_config_raw:\n");
+
+ /* Reset CCDC */
+ vpfe_ccdc_restore_defaults(ccdc);
+
+ /* Disable latching function registers on VSYNC */
+ vpfe_reg_write(ccdc, VPFE_LATCH_ON_VSYNC_DISABLE, VPFE_CCDCFG);
+
+ /*
+ * Configure the vertical sync polarity(SYN_MODE.VDPOL),
+ * horizontal sync polarity (SYN_MODE.HDPOL), frame id polarity
+ * (SYN_MODE.FLDPOL), frame format(progressive or interlace),
+ * data size(SYNMODE.DATSIZ), &pixel format (Input mode), output
+ * SDRAM, enable internal timing generator
+ */
+ syn_mode = (((params->vd_pol & VPFE_VD_POL_MASK) << VPFE_VD_POL_SHIFT) |
+ ((params->hd_pol & VPFE_HD_POL_MASK) << VPFE_HD_POL_SHIFT) |
+ ((params->fid_pol & VPFE_FID_POL_MASK) <<
+ VPFE_FID_POL_SHIFT) | ((params->frm_fmt &
+ VPFE_FRM_FMT_MASK) << VPFE_FRM_FMT_SHIFT) |
+ ((config_params->data_sz & VPFE_DATA_SZ_MASK) <<
+ VPFE_DATA_SZ_SHIFT) | ((params->pix_fmt &
+ VPFE_PIX_FMT_MASK) << VPFE_PIX_FMT_SHIFT) |
+ VPFE_WEN_ENABLE | VPFE_VDHDEN_ENABLE);
+
+ /* Enable and configure aLaw register if needed */
+ if (config_params->alaw.enable) {
+ val = ((config_params->alaw.gamma_wd &
+ VPFE_ALAW_GAMMA_WD_MASK) | VPFE_ALAW_ENABLE);
+ vpfe_reg_write(ccdc, val, VPFE_ALAW);
+ vpfe_dbg(3, dev, "\nWriting 0x%x to ALAW...\n", val);
+ }
+
+ /* Configure video window */
+ vpfe_ccdc_setwin(ccdc, ¶ms->win, params->frm_fmt,
+ params->bytesperpixel);
+
+ /* Configure Black Clamp */
+ vpfe_ccdc_config_black_clamp(ccdc, &config_params->blk_clamp);
+
+ /* Configure Black level compensation */
+ vpfe_ccdc_config_black_compense(ccdc, &config_params->blk_comp);
+
+ /* If data size is 8 bit then pack the data */
+ if ((config_params->data_sz == VPFE_CCDC_DATA_8BITS) ||
+ config_params->alaw.enable)
+ syn_mode |= VPFE_DATA_PACK_ENABLE;
+
+ /*
+ * Configure Horizontal offset register. If pack 8 is enabled then
+ * 1 pixel will take 1 byte
+ */
+ vpfe_reg_write(ccdc, params->bytesperline, VPFE_HSIZE_OFF);
+
+ vpfe_dbg(3, dev, "Writing %d (%x) to HSIZE_OFF\n",
+ params->bytesperline, params->bytesperline);
+
+ /* Set value for SDOFST */
+ if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) {
+ if (params->image_invert_enable) {
+ /* For intelace inverse mode */
+ vpfe_reg_write(ccdc, VPFE_INTERLACED_IMAGE_INVERT,
+ VPFE_SDOFST);
+ } else {
+ /* For intelace non inverse mode */
+ vpfe_reg_write(ccdc, VPFE_INTERLACED_NO_IMAGE_INVERT,
+ VPFE_SDOFST);
+ }
+ } else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) {
+ vpfe_reg_write(ccdc, VPFE_PROGRESSIVE_NO_IMAGE_INVERT,
+ VPFE_SDOFST);
+ }
+
+ vpfe_reg_write(ccdc, syn_mode, VPFE_SYNMODE);
+
+ vpfe_reg_dump(ccdc);
+}
+
+static inline int
+vpfe_ccdc_set_buftype(struct vpfe_ccdc *ccdc,
+ enum ccdc_buftype buf_type)
+{
+ if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER)
+ ccdc->ccdc_cfg.bayer.buf_type = buf_type;
+ else
+ ccdc->ccdc_cfg.ycbcr.buf_type = buf_type;
+
+ return 0;
+}
+
+static inline enum ccdc_buftype vpfe_ccdc_get_buftype(struct vpfe_ccdc *ccdc)
+{
+ if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER)
+ return ccdc->ccdc_cfg.bayer.buf_type;
+
+ return ccdc->ccdc_cfg.ycbcr.buf_type;
+}
+
+static int vpfe_ccdc_set_pixel_format(struct vpfe_ccdc *ccdc, u32 pixfmt)
+{
+ struct vpfe_device *dev = container_of(ccdc, struct vpfe_device, ccdc);
+
+ vpfe_dbg(1, dev, "vpfe_ccdc_set_pixel_format: if_type: %d, pixfmt:%s\n",
+ ccdc->ccdc_cfg.if_type, print_fourcc(pixfmt));
+
+ if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER) {
+ ccdc->ccdc_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW;
+ /*
+ * Need to clear it in case it was left on
+ * after the last capture.
+ */
+ ccdc->ccdc_cfg.bayer.config_params.alaw.enable = 0;
+
+ switch (pixfmt) {
+ case V4L2_PIX_FMT_SBGGR8:
+ ccdc->ccdc_cfg.bayer.config_params.alaw.enable = 1;
+ break;
+ case V4L2_PIX_FMT_YUYV:
+ case V4L2_PIX_FMT_UYVY:
+ case V4L2_PIX_FMT_YUV420:
+ case V4L2_PIX_FMT_NV12:
+ case V4L2_PIX_FMT_RGB565X:
+ break; /* nothing for now */
+ case V4L2_PIX_FMT_SBGGR16:
+ default:
+ return -EINVAL;
+ }
+ } else {
+ switch (pixfmt) {
+ case V4L2_PIX_FMT_YUYV:
+ ccdc->ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR;
+ break;
+ case V4L2_PIX_FMT_UYVY:
+ ccdc->ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static u32 vpfe_ccdc_get_pixel_format(struct vpfe_ccdc *ccdc)
+{
+ u32 pixfmt;
+
+ if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER) {
+ pixfmt = V4L2_PIX_FMT_YUYV;
+ } else {
+ if (ccdc->ccdc_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR)
+ pixfmt = V4L2_PIX_FMT_YUYV;
+ else
+ pixfmt = V4L2_PIX_FMT_UYVY;
+ }
+
+ return pixfmt;
+}
+
+static int
+vpfe_ccdc_set_image_window(struct vpfe_ccdc *ccdc,
+ struct v4l2_rect *win, unsigned int bpp)
+{
+ if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER) {
+ ccdc->ccdc_cfg.bayer.win = *win;
+ ccdc->ccdc_cfg.bayer.bytesperpixel = bpp;
+ ccdc->ccdc_cfg.bayer.bytesperline = ALIGN(win->width * bpp, 32);
+ } else {
+ ccdc->ccdc_cfg.ycbcr.win = *win;
+ ccdc->ccdc_cfg.ycbcr.bytesperpixel = bpp;
+ ccdc->ccdc_cfg.ycbcr.bytesperline = ALIGN(win->width * bpp, 32);
+ }
+
+ return 0;
+}
+
+static inline void
+vpfe_ccdc_get_image_window(struct vpfe_ccdc *ccdc,
+ struct v4l2_rect *win)
+{
+ if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER)
+ *win = ccdc->ccdc_cfg.bayer.win;
+ else
+ *win = ccdc->ccdc_cfg.ycbcr.win;
+}
+
+static inline unsigned int vpfe_ccdc_get_line_length(struct vpfe_ccdc *ccdc)
+{
+ if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER)
+ return ccdc->ccdc_cfg.bayer.bytesperline;
+
+ return ccdc->ccdc_cfg.ycbcr.bytesperline;
+}
+
+static inline int
+vpfe_ccdc_set_frame_format(struct vpfe_ccdc *ccdc,
+ enum ccdc_frmfmt frm_fmt)
+{
+ if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER)
+ ccdc->ccdc_cfg.bayer.frm_fmt = frm_fmt;
+ else
+ ccdc->ccdc_cfg.ycbcr.frm_fmt = frm_fmt;
+
+ return 0;
+}
+
+static inline enum ccdc_frmfmt
+vpfe_ccdc_get_frame_format(struct vpfe_ccdc *ccdc)
+{
+ if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER)
+ return ccdc->ccdc_cfg.bayer.frm_fmt;
+
+ return ccdc->ccdc_cfg.ycbcr.frm_fmt;
+}
+
+static inline int vpfe_ccdc_getfid(struct vpfe_ccdc *ccdc)
+{
+ return (vpfe_reg_read(ccdc, VPFE_SYNMODE) >> 15) & 1;
+}
+
+static inline void vpfe_set_sdr_addr(struct vpfe_ccdc *ccdc, unsigned long addr)
+{
+ vpfe_reg_write(ccdc, addr & 0xffffffe0, VPFE_SDR_ADDR);
+}
+
+static int vpfe_ccdc_set_hw_if_params(struct vpfe_ccdc *ccdc,
+ struct vpfe_hw_if_param *params)
+{
+ struct vpfe_device *vpfe = container_of(ccdc, struct vpfe_device, ccdc);
+
+ ccdc->ccdc_cfg.if_type = params->if_type;
+
+ switch (params->if_type) {
+ case VPFE_BT656:
+ case VPFE_YCBCR_SYNC_16:
+ case VPFE_YCBCR_SYNC_8:
+ case VPFE_BT656_10BIT:
+ ccdc->ccdc_cfg.ycbcr.vd_pol = params->vdpol;
+ ccdc->ccdc_cfg.ycbcr.hd_pol = params->hdpol;
+ break;
+ case VPFE_RAW_BAYER:
+ ccdc->ccdc_cfg.bayer.vd_pol = params->vdpol;
+ ccdc->ccdc_cfg.bayer.hd_pol = params->hdpol;
+ if (params->bus_width == 10)
+ ccdc->ccdc_cfg.bayer.config_params.data_sz =
+ VPFE_CCDC_DATA_10BITS;
+ else
+ ccdc->ccdc_cfg.bayer.config_params.data_sz =
+ VPFE_CCDC_DATA_8BITS;
+ vpfe_dbg(1, vpfe, "params.bus_width: %d\n",
+ params->bus_width);
+ vpfe_dbg(1, vpfe, "config_params.data_sz: %d\n",
+ ccdc->ccdc_cfg.bayer.config_params.data_sz);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void vpfe_clear_intr(struct vpfe_ccdc *ccdc, int vdint)
+{
+ unsigned int vpfe_int_status;
+
+ vpfe_int_status = vpfe_reg_read(ccdc, VPFE_IRQ_STS);
+
+ switch (vdint) {
+ /* VD0 interrupt */
+ case VPFE_VDINT0:
+ vpfe_int_status &= ~VPFE_VDINT0;
+ vpfe_int_status |= VPFE_VDINT0;
+ break;
+ /* VD1 interrupt */
+ case VPFE_VDINT1:
+ vpfe_int_status &= ~VPFE_VDINT1;
+ vpfe_int_status |= VPFE_VDINT1;
+ break;
+ /* VD2 interrupt */
+ case VPFE_VDINT2:
+ vpfe_int_status &= ~VPFE_VDINT2;
+ vpfe_int_status |= VPFE_VDINT2;
+ break;
+ /* Clear all interrupts */
+ default:
+ vpfe_int_status &= ~(VPFE_VDINT0 |
+ VPFE_VDINT1 |
+ VPFE_VDINT2);
+ vpfe_int_status |= (VPFE_VDINT0 |
+ VPFE_VDINT1 |
+ VPFE_VDINT2);
+ break;
+ }
+ /* Clear specific VDINT from the status register */
+ vpfe_reg_write(ccdc, vpfe_int_status, VPFE_IRQ_STS);
+
+ vpfe_int_status = vpfe_reg_read(ccdc, VPFE_IRQ_STS);
+
+ /* Acknowledge that we are done with all interrupts */
+ vpfe_reg_write(ccdc, 1, VPFE_IRQ_EOI);
+}
+
+static void vpfe_ccdc_config_defaults(struct vpfe_ccdc *ccdc)
+{
+ ccdc->ccdc_cfg.if_type = VPFE_RAW_BAYER;
+
+ ccdc->ccdc_cfg.ycbcr.pix_fmt = CCDC_PIXFMT_YCBCR_8BIT;
+ ccdc->ccdc_cfg.ycbcr.frm_fmt = CCDC_FRMFMT_INTERLACED;
+ ccdc->ccdc_cfg.ycbcr.fid_pol = VPFE_PINPOL_POSITIVE;
+ ccdc->ccdc_cfg.ycbcr.vd_pol = VPFE_PINPOL_POSITIVE;
+ ccdc->ccdc_cfg.ycbcr.hd_pol = VPFE_PINPOL_POSITIVE;
+ ccdc->ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
+ ccdc->ccdc_cfg.ycbcr.buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED;
+
+ ccdc->ccdc_cfg.ycbcr.win.left = 0;
+ ccdc->ccdc_cfg.ycbcr.win.top = 0;
+ ccdc->ccdc_cfg.ycbcr.win.width = 720;
+ ccdc->ccdc_cfg.ycbcr.win.height = 576;
+ ccdc->ccdc_cfg.ycbcr.bt656_enable = 1;
+
+ ccdc->ccdc_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW;
+ ccdc->ccdc_cfg.bayer.frm_fmt = CCDC_FRMFMT_PROGRESSIVE;
+ ccdc->ccdc_cfg.bayer.fid_pol = VPFE_PINPOL_POSITIVE;
+ ccdc->ccdc_cfg.bayer.vd_pol = VPFE_PINPOL_POSITIVE;
+ ccdc->ccdc_cfg.bayer.hd_pol = VPFE_PINPOL_POSITIVE;
+
+ ccdc->ccdc_cfg.bayer.win.left = 0;
+ ccdc->ccdc_cfg.bayer.win.top = 0;
+ ccdc->ccdc_cfg.bayer.win.width = 800;
+ ccdc->ccdc_cfg.bayer.win.height = 600;
+ ccdc->ccdc_cfg.bayer.config_params.data_sz = VPFE_CCDC_DATA_8BITS;
+ ccdc->ccdc_cfg.bayer.config_params.alaw.gamma_wd =
+ VPFE_CCDC_GAMMA_BITS_09_0;
+}
+
+/*
+ * vpfe_get_ccdc_image_format - Get image parameters based on CCDC settings
+ */
+static int vpfe_get_ccdc_image_format(struct vpfe_device *dev,
+ struct v4l2_format *f)
+{
+ struct v4l2_rect image_win;
+ enum ccdc_buftype buf_type;
+ enum ccdc_frmfmt frm_fmt;
+
+ memset(f, 0, sizeof(*f));
+ f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ vpfe_ccdc_get_image_window(&dev->ccdc, &image_win);
+ f->fmt.pix.width = image_win.width;
+ f->fmt.pix.height = image_win.height;
+ f->fmt.pix.bytesperline = vpfe_ccdc_get_line_length(&dev->ccdc);
+ f->fmt.pix.sizeimage = f->fmt.pix.bytesperline *
+ f->fmt.pix.height;
+ buf_type = vpfe_ccdc_get_buftype(&dev->ccdc);
+ f->fmt.pix.pixelformat = vpfe_ccdc_get_pixel_format(&dev->ccdc);
+ frm_fmt = vpfe_ccdc_get_frame_format(&dev->ccdc);
+ if (frm_fmt == CCDC_FRMFMT_PROGRESSIVE) {
+ f->fmt.pix.field = V4L2_FIELD_NONE;
+ } else if (frm_fmt == CCDC_FRMFMT_INTERLACED) {
+ if (buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED) {
+ f->fmt.pix.field = V4L2_FIELD_INTERLACED;
+ } else if (buf_type == CCDC_BUFTYPE_FLD_SEPARATED) {
+ f->fmt.pix.field = V4L2_FIELD_SEQ_TB;
+ } else {
+ vpfe_err(dev, "Invalid buf_type\n");
+ return -EINVAL;
+ }
+ } else {
+ vpfe_err(dev, "Invalid frm_fmt\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int vpfe_config_ccdc_image_format(struct vpfe_device *dev)
+{
+ enum ccdc_frmfmt frm_fmt = CCDC_FRMFMT_INTERLACED;
+ int ret = 0;
+
+ vpfe_dbg(2, dev, "vpfe_config_ccdc_image_format\n");
+
+ vpfe_dbg(1, dev, "pixelformat: %s\n",
+ print_fourcc(dev->fmt.fmt.pix.pixelformat));
+
+ if (vpfe_ccdc_set_pixel_format(
+ &dev->ccdc,
+ dev->fmt.fmt.pix.pixelformat) < 0) {
+ vpfe_err(dev,
+ "couldn't set pix format in ccdc\n");
+ return -EINVAL;
+ }
+ /* configure the image window */
+ vpfe_ccdc_set_image_window(&dev->ccdc, &dev->crop, dev->bpp);
+
+ switch (dev->fmt.fmt.pix.field) {
+ case V4L2_FIELD_INTERLACED:
+ /* do nothing, since it is default */
+ ret = vpfe_ccdc_set_buftype(
+ &dev->ccdc,
+ CCDC_BUFTYPE_FLD_INTERLEAVED);
+ break;
+ case V4L2_FIELD_NONE:
+ frm_fmt = CCDC_FRMFMT_PROGRESSIVE;
+ /* buffer type only applicable for interlaced scan */
+ break;
+ case V4L2_FIELD_SEQ_TB:
+ ret = vpfe_ccdc_set_buftype(
+ &dev->ccdc,
+ CCDC_BUFTYPE_FLD_SEPARATED);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* set the frame format */
+ if (!ret)
+ ret = vpfe_ccdc_set_frame_format(&dev->ccdc, frm_fmt);
+ return ret;
+}
+
+/*
+ * vpfe_config_image_format()
+ * For a given standard, this functions sets up the default
+ * pix format & crop values in the vpfe device and ccdc. It first
+ * starts with defaults based values from the standard table.
+ * It then checks if sub device support g_mbus_fmt and then override the
+ * values based on that.Sets crop values to match with scan resolution
+ * starting at 0,0. It calls vpfe_config_ccdc_image_format() set the
+ * values in ccdc
+ */
+static int vpfe_config_image_format(struct vpfe_device *dev,
+ v4l2_std_id std_id)
+{
+ struct v4l2_pix_format *pix = &dev->fmt.fmt.pix;
+ int i, ret;
+
+ for (i = 0; i < ARRAY_SIZE(vpfe_standards); i++) {
+ if (vpfe_standards[i].std_id & std_id) {
+ dev->std_info.active_pixels =
+ vpfe_standards[i].width;
+ dev->std_info.active_lines =
+ vpfe_standards[i].height;
+ dev->std_info.frame_format =
+ vpfe_standards[i].frame_format;
+ dev->std_index = i;
+ break;
+ }
+ }
+
+ if (i == ARRAY_SIZE(vpfe_standards)) {
+ vpfe_err(dev, "standard not supported\n");
+ return -EINVAL;
+ }
+
+ dev->crop.top = 0;
+ dev->crop.left = 0;
+ dev->crop.width = dev->std_info.active_pixels;
+ dev->crop.height = dev->std_info.active_lines;
+ pix->width = dev->crop.width;
+ pix->height = dev->crop.height;
+ pix->pixelformat = V4L2_PIX_FMT_YUYV;
+
+ /* first field and frame format based on standard frame format */
+ if (dev->std_info.frame_format)
+ pix->field = V4L2_FIELD_INTERLACED;
+ else
+ pix->field = V4L2_FIELD_NONE;
+
+ ret = __vpfe_get_format(dev, &dev->fmt, &dev->bpp);
+ if (ret)
+ return ret;
+
+ /* Update the crop window based on found values */
+ dev->crop.width = pix->width;
+ dev->crop.height = pix->height;
+
+ return vpfe_config_ccdc_image_format(dev);
+}
+
+static int vpfe_initialize_device(struct vpfe_device *vpfe)
+{
+ struct vpfe_subdev_info *sdinfo;
+ int ret;
+
+ sdinfo = &vpfe->cfg->sub_devs[0];
+ sdinfo->sd = vpfe->sd[0];
+ vpfe->current_input = 0;
+ vpfe->std_index = 0;
+ /* Configure the default format information */
+ ret = vpfe_config_image_format(vpfe,
+ vpfe_standards[vpfe->std_index].std_id);
+ if (ret)
+ return ret;
+
+ pm_runtime_get_sync(vpfe->pdev);
+
+ vpfe_config_enable(&vpfe->ccdc, 1);
+
+ vpfe_ccdc_restore_defaults(&vpfe->ccdc);
+
+ /* Clear all VPFE interrupts */
+ vpfe_clear_intr(&vpfe->ccdc, -1);
+
+ return ret;
+}
+
+/*
+ * vpfe_release : This function is based on the vb2_fop_release
+ * helper function.
+ * It has been augmented to handle module power management,
+ * by disabling/enabling h/w module fcntl clock when necessary.
+ */
+static int vpfe_release(struct file *file)
+{
+ struct vpfe_device *dev = video_drvdata(file);
+ int ret;
+
+ vpfe_dbg(2, dev, "vpfe_release\n");
+
+ ret = _vb2_fop_release(file, NULL);
+
+ if (v4l2_fh_is_singular_file(file)) {
+ mutex_lock(&dev->lock);
+ vpfe_ccdc_close(&dev->ccdc, dev->pdev);
+ mutex_unlock(&dev->lock);
+ }
+
+ return ret;
+}
+
+/*
+ * vpfe_open : This function is based on the v4l2_fh_open helper function.
+ * It has been augmented to handle module power management,
+ * by disabling/enabling h/w module fcntl clock when necessary.
+ */
+
+static int vpfe_open(struct file *file)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+
+ v4l2_fh_open(file);
+
+ if (!v4l2_fh_is_singular_file(file))
+ return 0;
+
+ mutex_lock(&vpfe->lock);
+ if (vpfe_initialize_device(vpfe)) {
+ mutex_unlock(&vpfe->lock);
+ return -ENODEV;
+ }
+ mutex_unlock(&vpfe->lock);
+
+ return 0;
+}
+
+/**
+ * vpfe_schedule_next_buffer: set next buffer address for capture
+ * @vpfe : ptr to vpfe device
+ *
+ * This function will get next buffer from the dma queue and
+ * set the buffer address in the vpfe register for capture.
+ * the buffer is marked active
+ *
+ * Assumes caller is holding vpfe->dma_queue_lock already
+ */
+static inline void vpfe_schedule_next_buffer(struct vpfe_device *vpfe)
+{
+ vpfe->next_frm = list_entry(vpfe->dma_queue.next,
+ struct vpfe_cap_buffer, list);
+ list_del(&vpfe->next_frm->list);
+
+ vpfe_set_sdr_addr(&vpfe->ccdc,
+ vb2_dma_contig_plane_dma_addr(&vpfe->next_frm->vb, 0));
+}
+
+static inline void vpfe_schedule_bottom_field(struct vpfe_device *vpfe)
+{
+ unsigned long addr;
+
+ addr = vb2_dma_contig_plane_dma_addr(&vpfe->next_frm->vb, 0) +
+ vpfe->field_off;
+
+ vpfe_set_sdr_addr(&vpfe->ccdc, addr);
+}
+
+/*
+ * vpfe_process_buffer_complete: process a completed buffer
+ * @vpfe : ptr to vpfe device
+ *
+ * This function time stamp the buffer and mark it as DONE. It also
+ * wake up any process waiting on the QUEUE and set the next buffer
+ * as current
+ */
+static inline void vpfe_process_buffer_complete(struct vpfe_device *vpfe)
+{
+ v4l2_get_timestamp(&vpfe->cur_frm->vb.v4l2_buf.timestamp);
+ vb2_buffer_done(&vpfe->cur_frm->vb, VB2_BUF_STATE_DONE);
+ vpfe->cur_frm = vpfe->next_frm;
+}
+
+/*
+ * vpfe_isr : ISR handler for vpfe capture (VINT0)
+ * @irq: irq number
+ * @dev_id: dev_id ptr
+ *
+ * It changes status of the captured buffer, takes next buffer from the queue
+ * and sets its address in VPFE registers
+ */
+static irqreturn_t vpfe_isr(int irq, void *dev)
+{
+ struct vpfe_device *vpfe = (struct vpfe_device *)dev;
+ enum v4l2_field field;
+ int intr_status;
+ int fid;
+
+ intr_status = vpfe_reg_read(&vpfe->ccdc, VPFE_IRQ_STS);
+
+ if (intr_status & VPFE_VDINT0) {
+ field = vpfe->fmt.fmt.pix.field;
+
+ if (field == V4L2_FIELD_NONE) {
+ /* handle progressive frame capture */
+ if (vpfe->cur_frm != vpfe->next_frm)
+ vpfe_process_buffer_complete(vpfe);
+ goto next_intr;
+ }
+
+ /* interlaced or TB capture check which field
+ we are in hardware */
+ fid = vpfe_ccdc_getfid(&vpfe->ccdc);
+
+ /* switch the software maintained field id */
+ vpfe->field_id ^= 1;
+ if (fid == vpfe->field_id) {
+ /* we are in-sync here,continue */
+ if (fid == 0) {
+ /*
+ * One frame is just being captured. If the
+ * next frame is available, release the
+ * current frame and move on
+ */
+ if (vpfe->cur_frm != vpfe->next_frm)
+ vpfe_process_buffer_complete(vpfe);
+ /*
+ * based on whether the two fields are stored
+ * interleavely or separately in memory,
+ * reconfigure the CCDC memory address
+ */
+ if (field == V4L2_FIELD_SEQ_TB)
+ vpfe_schedule_bottom_field(vpfe);
+
+ goto next_intr;
+ }
+ /*
+ * if one field is just being captured configure
+ * the next frame get the next frame from the empty
+ * queue if no frame is available hold on to the
+ * current buffer
+ */
+ spin_lock(&vpfe->dma_queue_lock);
+ if (!list_empty(&vpfe->dma_queue) &&
+ vpfe->cur_frm == vpfe->next_frm)
+ vpfe_schedule_next_buffer(vpfe);
+ spin_unlock(&vpfe->dma_queue_lock);
+ } else if (fid == 0) {
+ /*
+ * out of sync. Recover from any hardware out-of-sync.
+ * May loose one frame
+ */
+ vpfe->field_id = fid;
+ }
+ }
+
+next_intr:
+ if (intr_status & VPFE_VDINT1) {
+ spin_lock(&vpfe->dma_queue_lock);
+ if (vpfe->fmt.fmt.pix.field == V4L2_FIELD_NONE &&
+ !list_empty(&vpfe->dma_queue) &&
+ vpfe->cur_frm == vpfe->next_frm)
+ vpfe_schedule_next_buffer(vpfe);
+ spin_unlock(&vpfe->dma_queue_lock);
+ }
+
+ vpfe_clear_intr(&vpfe->ccdc, intr_status);
+
+ return IRQ_HANDLED;
+}
+
+static inline void vpfe_detach_irq(struct vpfe_device *vpfe)
+{
+ unsigned int intr = VPFE_VDINT0;
+ enum ccdc_frmfmt frame_format;
+
+ frame_format = vpfe_ccdc_get_frame_format(&vpfe->ccdc);
+ if (frame_format == CCDC_FRMFMT_PROGRESSIVE)
+ intr |= VPFE_VDINT1;
+
+ vpfe_reg_write(&vpfe->ccdc, intr, VPFE_IRQ_EN_CLR);
+}
+
+static inline void vpfe_attach_irq(struct vpfe_device *dev)
+{
+ unsigned int intr = VPFE_VDINT0;
+ enum ccdc_frmfmt frame_format;
+
+ frame_format = vpfe_ccdc_get_frame_format(&dev->ccdc);
+ if (frame_format == CCDC_FRMFMT_PROGRESSIVE)
+ intr |= VPFE_VDINT1;
+
+ vpfe_reg_write(&dev->ccdc, intr, VPFE_IRQ_EN_SET);
+}
+
+static int vpfe_querycap(struct file *file, void *priv,
+ struct v4l2_capability *cap)
+{
+ struct vpfe_device *dev = video_drvdata(file);
+
+ vpfe_dbg(2, dev, "vpfe_querycap\n");
+
+ strlcpy(cap->driver, VPFE_MODULE_NAME, sizeof(cap->driver));
+ strlcpy(cap->card, "TI AM437x VPFE", sizeof(cap->card));
+ snprintf(cap->bus_info, sizeof(cap->bus_info),
+ "platform:%s", dev->v4l2_dev.name);
+ cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
+ V4L2_CAP_READWRITE;
+ cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
+
+ return 0;
+}
+
+/* get the format set at output pad of the adjacent subdev */
+static int __vpfe_get_format(struct vpfe_device *vpfe,
+ struct v4l2_format *format, unsigned int *bpp)
+{
+ struct v4l2_mbus_framefmt mbus_fmt;
+ struct vpfe_subdev_info *sdinfo;
+ struct v4l2_subdev_format fmt;
+ int ret;
+
+ sdinfo = vpfe->current_subdev;
+ if (!sdinfo->sd)
+ return -EINVAL;
+
+ fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+ fmt.pad = 0;
+
+ ret = v4l2_subdev_call(sdinfo->sd, pad, get_fmt, NULL, &fmt);
+ if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV)
+ return ret;
+
+ if (!ret) {
+ v4l2_fill_pix_format(&format->fmt.pix, &fmt.format);
+ mbus_to_pix(vpfe, &fmt.format, &format->fmt.pix, bpp);
+ } else {
+ ret = v4l2_device_call_until_err(&vpfe->v4l2_dev,
+ sdinfo->grp_id,
+ video, g_mbus_fmt,
+ &mbus_fmt);
+ if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV)
+ return ret;
+ v4l2_fill_pix_format(&format->fmt.pix, &mbus_fmt);
+ mbus_to_pix(vpfe, &mbus_fmt, &format->fmt.pix, bpp);
+ }
+
+ format->type = vpfe->fmt.type;
+
+ vpfe_dbg(1, vpfe, "__vpfe_get_format size %dx%d (%s) bytesperline = %d, sizeimage = %d, bpp = %d\n",
+ format->fmt.pix.width, format->fmt.pix.height,
+ print_fourcc(format->fmt.pix.pixelformat),
+ format->fmt.pix.bytesperline, format->fmt.pix.sizeimage, *bpp);
+
+ return 0;
+}
+
+/* set the format at output pad of the adjacent subdev */
+static int __vpfe_set_format(struct vpfe_device *vpfe,
+ struct v4l2_format *format, unsigned int *bpp)
+{
+ struct vpfe_subdev_info *sdinfo;
+ struct v4l2_subdev_format fmt;
+ int ret;
+
+ vpfe_dbg(2, vpfe, "__vpfe_set_format\n");
+
+ sdinfo = vpfe->current_subdev;
+ if (!sdinfo->sd)
+ return -EINVAL;
+
+ fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+ fmt.pad = 0;
+
+ ret = pix_to_mbus(vpfe, &format->fmt.pix, &fmt.format);
+ if (ret)
+ return ret;
+
+ ret = v4l2_subdev_call(sdinfo->sd, pad, set_fmt, NULL, &fmt);
+ if (ret == -ENOIOCTLCMD)
+ return -EINVAL;
+
+ format->type = vpfe->fmt.type;
+
+ /* convert mbus_format to v4l2_format */
+ v4l2_fill_pix_format(&format->fmt.pix, &fmt.format);
+ mbus_to_pix(vpfe, &fmt.format, &format->fmt.pix, bpp);
+ vpfe_dbg(1, vpfe, "__vpfe_set_format size %dx%d (%s) bytesperline = %d, sizeimage = %d, bpp = %d\n",
+ format->fmt.pix.width, format->fmt.pix.height,
+ print_fourcc(format->fmt.pix.pixelformat),
+ format->fmt.pix.bytesperline, format->fmt.pix.sizeimage, *bpp);
+
+ return 0;
+}
+
+static int vpfe_g_fmt(struct file *file, void *priv,
+ struct v4l2_format *fmt)
+{
+ struct vpfe_device *dev = video_drvdata(file);
+ struct v4l2_format format;
+ unsigned int bpp;
+ int ret = 0;
+
+ vpfe_dbg(2, dev, "vpfe_g_fmt\n");
+
+ ret = __vpfe_get_format(dev, &format, &bpp);
+ if (ret)
+ return ret;
+
+ /* Fill in the information about format */
+ *fmt = dev->fmt;
+
+ return ret;
+}
+
+static int vpfe_enum_fmt(struct file *file, void *priv,
+ struct v4l2_fmtdesc *f)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+ struct v4l2_subdev_mbus_code_enum mbus_code;
+ struct vpfe_subdev_info *sdinfo;
+ struct vpfe_fmt *fmt;
+ int ret;
+
+ vpfe_dbg(2, vpfe, "vpfe_enum_format index:%d\n",
+ f->index);
+
+ sdinfo = vpfe->current_subdev;
+ if (!sdinfo->sd)
+ return -EINVAL;
+
+ mbus_code.index = f->index;
+ ret = v4l2_subdev_call(sdinfo->sd, pad, enum_mbus_code,
+ NULL, &mbus_code);
+ if (ret)
+ return -EINVAL;
+
+ /* convert mbus_format to v4l2_format */
+ fmt = find_format_by_code(mbus_code.code);
+ if (!fmt) {
+ vpfe_err(vpfe, "mbus code 0x%08x not found\n",
+ mbus_code.code);
+ return -EINVAL;
+ }
+
+ strncpy(f->description, fmt->name, sizeof(f->description) - 1);
+ f->pixelformat = fmt->fourcc;
+ f->type = vpfe->fmt.type;
+
+ vpfe_dbg(1, vpfe, "vpfe_enum_format: mbus index: %d code: %x pixelformat: %s [%s]\n",
+ f->index, fmt->code, print_fourcc(fmt->fourcc), fmt->name);
+
+ return 0;
+}
+
+static int vpfe_s_fmt(struct file *file, void *priv,
+ struct v4l2_format *fmt)
+{
+ struct vpfe_device *dev = video_drvdata(file);
+ struct vb2_queue *q = &dev->buffer_queue;
+ struct v4l2_format format;
+ unsigned int bpp;
+ int ret = 0;
+
+ vpfe_dbg(2, dev, "vpfe_s_fmt\n");
+
+ /* Check for valid frame format */
+ ret = __vpfe_get_format(dev, &format, &bpp);
+ if (ret)
+ return ret;
+
+ /* If streaming is started, return error */
+ if (vb2_is_busy(q)) {
+ vpfe_err(dev, "%s device busy\n", __func__);
+ return -EBUSY;
+ }
+
+ if (!cmp_v4l2_format(fmt, &format)) {
+ /* Sensor format is different from the requested format
+ * so we need to change it
+ */
+ ret = __vpfe_set_format(dev, fmt, &bpp);
+ if (ret)
+ return ret;
+ } else /* Just make sure all of the fields are consistent */
+ *fmt = format;
+
+ fmt->fmt.pix.priv = 0;
+
+ /* First detach any IRQ if currently attached */
+ vpfe_detach_irq(dev);
+ dev->fmt = *fmt;
+ dev->bpp = bpp;
+
+ /* Update the crop window based on found values */
+ dev->crop.width = fmt->fmt.pix.width;
+ dev->crop.height = fmt->fmt.pix.height;
+
+ /* set image capture parameters in the ccdc */
+ return vpfe_config_ccdc_image_format(dev);
+}
+
+static int vpfe_try_fmt(struct file *file, void *priv,
+ struct v4l2_format *fmt)
+{
+ struct vpfe_device *dev = video_drvdata(file);
+ struct v4l2_format format;
+ unsigned int bpp;
+ int ret = 0;
+
+ vpfe_dbg(2, dev, "vpfe_try_fmt\n");
+
+ memset(&format, 0x00, sizeof(format));
+ ret = __vpfe_get_format(dev, &format, &bpp);
+ if (ret)
+ return ret;
+
+ *fmt = format;
+ fmt->fmt.pix.priv = 0;
+
+ return 0;
+}
+
+static int vpfe_enum_size(struct file *file, void *priv,
+ struct v4l2_frmsizeenum *fsize)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+ struct v4l2_subdev_frame_size_enum fse;
+ struct vpfe_subdev_info *sdinfo;
+ struct v4l2_mbus_framefmt mbus;
+ struct v4l2_pix_format pix;
+ struct vpfe_fmt *fmt;
+ int ret;
+
+ vpfe_dbg(2, vpfe, "vpfe_enum_size\n");
+
+ /* check for valid format */
+ fmt = find_format_by_pix(fsize->pixel_format);
+ if (!fmt) {
+ vpfe_dbg(3, vpfe, "Invalid pixel code: %x, default used instead\n",
+ fsize->pixel_format);
+ return -EINVAL;
+ }
+
+ memset(fsize->reserved, 0x00, sizeof(fsize->reserved));
+
+ sdinfo = vpfe->current_subdev;
+ if (!sdinfo->sd)
+ return -EINVAL;
+
+ /* Construct pix from parameter and use default for the rest */
+ pix.pixelformat = fsize->pixel_format;
+ pix.width = 640;
+ pix.height = 480;
+ pix.colorspace = V4L2_COLORSPACE_JPEG;
+ pix.field = V4L2_FIELD_NONE;
+ ret = pix_to_mbus(vpfe, &pix, &mbus);
+ if (ret)
+ return ret;
+
+ fse.index = fsize->index;
+ fse.pad = 0;
+ fse.code = mbus.code;
+ ret = v4l2_subdev_call(sdinfo->sd, pad, enum_frame_size, NULL, &fse);
+ if (ret)
+ return -EINVAL;
+
+ vpfe_dbg(1, vpfe, "vpfe_enum_size: index: %d code: %x W:[%d,%d] H:[%d,%d]\n",
+ fse.index, fse.code, fse.min_width, fse.max_width,
+ fse.min_height, fse.max_height);
+
+ fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
+ fsize->discrete.width = fse.max_width;
+ fsize->discrete.height = fse.max_height;
+
+ vpfe_dbg(1, vpfe, "vpfe_enum_size: index: %d pixformat: %s size: %dx%d\n",
+ fsize->index, print_fourcc(fsize->pixel_format),
+ fsize->discrete.width, fsize->discrete.height);
+
+ return 0;
+}
+
+/*
+ * vpfe_get_subdev_input_index - Get subdev index and subdev input index for a
+ * given app input index
+ */
+static int
+vpfe_get_subdev_input_index(struct vpfe_device *vpfe,
+ int *subdev_index,
+ int *subdev_input_index,
+ int app_input_index)
+{
+ struct vpfe_config *cfg = vpfe->cfg;
+ struct vpfe_subdev_info *sdinfo;
+ int i, j = 0;
+
+ for (i = 0; i < ARRAY_SIZE(vpfe->cfg->asd); i++) {
+ sdinfo = &cfg->sub_devs[i];
+ if (app_input_index < (j + 1)) {
+ *subdev_index = i;
+ *subdev_input_index = app_input_index - j;
+ return 0;
+ }
+ j++;
+ }
+ return -EINVAL;
+}
+
+/*
+ * vpfe_get_app_input - Get app input index for a given subdev input index
+ * driver stores the input index of the current sub device and translate it
+ * when application request the current input
+ */
+static int vpfe_get_app_input_index(struct vpfe_device *vpfe,
+ int *app_input_index)
+{
+ struct vpfe_config *cfg = vpfe->cfg;
+ struct vpfe_subdev_info *sdinfo;
+ int i, j = 0;
+
+ for (i = 0; i < ARRAY_SIZE(vpfe->cfg->asd); i++) {
+ sdinfo = &cfg->sub_devs[i];
+ if (!strcmp(sdinfo->name, vpfe->current_subdev->name)) {
+ if (vpfe->current_input >= 1)
+ return -1;
+ *app_input_index = j + vpfe->current_input;
+ return 0;
+ }
+ j++;
+ }
+ return -EINVAL;
+}
+
+static int vpfe_enum_input(struct file *file, void *priv,
+ struct v4l2_input *inp)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+ struct vpfe_subdev_info *sdinfo;
+ int subdev, index;
+
+ vpfe_dbg(2, vpfe, "vpfe_enum_input\n");
+
+ if (vpfe_get_subdev_input_index(vpfe,
+ &subdev,
+ &index,
+ inp->index) < 0) {
+ vpfe_dbg(1, vpfe,
+ "input information not found for the subdev\n");
+ return -EINVAL;
+ }
+ sdinfo = &vpfe->cfg->sub_devs[subdev];
+ memcpy(inp, &sdinfo->inputs[index], sizeof(struct v4l2_input));
+
+ return 0;
+}
+
+static int vpfe_g_input(struct file *file, void *priv, unsigned int *index)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+
+ vpfe_dbg(2, vpfe, "vpfe_g_input\n");
+
+ return vpfe_get_app_input_index(vpfe, index);
+}
+
+/* Assumes caller is holding vpfe_dev->lock */
+static int vpfe_set_input(struct vpfe_device *vpfe, unsigned int index)
+{
+ int subdev_index = 0, inp_index = 0;
+ struct vpfe_subdev_info *sdinfo;
+ struct vpfe_route *route;
+ u32 input, output;
+ int ret;
+
+ vpfe_dbg(2, vpfe, "vpfe_set_input: index: %d\n", index);
+
+ /* If streaming is started, return error */
+ if (vb2_is_busy(&vpfe->buffer_queue)) {
+ vpfe_err(vpfe, "%s device busy\n", __func__);
+ return -EBUSY;
+ }
+ ret = vpfe_get_subdev_input_index(vpfe,
+ &subdev_index,
+ &inp_index,
+ index);
+ if (ret < 0) {
+ vpfe_err(vpfe, "invalid input index\n");
+ goto get_out;
+ }
+
+ sdinfo = &vpfe->cfg->sub_devs[subdev_index];
+ sdinfo->sd = vpfe->sd[subdev_index];
+ route = &sdinfo->routes[inp_index];
+ if (route && sdinfo->can_route) {
+ input = route->input;
+ output = route->output;
+ if (sdinfo->sd) {
+ ret = v4l2_subdev_call(sdinfo->sd, video,
+ s_routing, input, output, 0);
+ if (ret) {
+ vpfe_err(vpfe, "s_routing failed\n");
+ ret = -EINVAL;
+ goto get_out;
+ }
+ }
+
+ }
+
+ vpfe->current_subdev = sdinfo;
+ if (sdinfo->sd)
+ vpfe->v4l2_dev.ctrl_handler = sdinfo->sd->ctrl_handler;
+ vpfe->current_input = index;
+ vpfe->std_index = 0;
+
+ /* set the bus/interface parameter for the sub device in ccdc */
+ ret = vpfe_ccdc_set_hw_if_params(&vpfe->ccdc, &sdinfo->vpfe_param);
+ if (ret)
+ return ret;
+
+ /* set the default image parameters in the device */
+ return vpfe_config_image_format(vpfe,
+ vpfe_standards[vpfe->std_index].std_id);
+
+get_out:
+ return ret;
+}
+
+static int vpfe_s_input(struct file *file, void *priv, unsigned int index)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+
+ vpfe_dbg(2, vpfe,
+ "vpfe_s_input: index: %d\n", index);
+
+ return vpfe_set_input(vpfe, index);
+}
+
+static int vpfe_querystd(struct file *file, void *priv, v4l2_std_id *std_id)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+ struct vpfe_subdev_info *sdinfo;
+
+ vpfe_dbg(2, vpfe, "vpfe_querystd\n");
+
+ sdinfo = vpfe->current_subdev;
+ if (sdinfo->inputs[0].capabilities != V4L2_IN_CAP_STD)
+ return -ENODATA;
+
+ /* Call querystd function of decoder device */
+ return v4l2_device_call_until_err(&vpfe->v4l2_dev, sdinfo->grp_id,
+ video, querystd, std_id);
+}
+
+static int vpfe_s_std(struct file *file, void *priv, v4l2_std_id std_id)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+ struct vpfe_subdev_info *sdinfo;
+ int ret;
+
+ vpfe_dbg(2, vpfe, "vpfe_s_std\n");
+
+ /* If streaming is started, return error */
+ if (vb2_is_busy(&vpfe->buffer_queue)) {
+ vpfe_err(vpfe, "%s device busy\n", __func__);
+ ret = -EBUSY;
+ return ret;
+ }
+
+ sdinfo = vpfe->current_subdev;
+ if (sdinfo->inputs[0].capabilities != V4L2_IN_CAP_STD)
+ return -ENODATA;
+
+ ret = v4l2_device_call_until_err(&vpfe->v4l2_dev, sdinfo->grp_id,
+ video, s_std, std_id);
+ if (ret < 0) {
+ vpfe_err(vpfe, "Failed to set standard\n");
+ return ret;
+ }
+ ret = vpfe_config_image_format(vpfe, std_id);
+
+ return ret;
+}
+
+static int vpfe_g_std(struct file *file, void *priv, v4l2_std_id *std_id)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+ struct vpfe_subdev_info *sdinfo;
+
+ vpfe_dbg(2, vpfe, "vpfe_g_std\n");
+
+ sdinfo = vpfe->current_subdev;
+ if (sdinfo->inputs[0].capabilities != V4L2_IN_CAP_STD)
+ return -ENODATA;
+
+ *std_id = vpfe_standards[vpfe->std_index].std_id;
+
+ return 0;
+}
+
+/*
+ * vpfe_calculate_offsets : This function calculates buffers offset
+ * for top and bottom field
+ */
+static void vpfe_calculate_offsets(struct vpfe_device *vpfe)
+{
+ struct v4l2_rect image_win;
+
+ vpfe_dbg(2, vpfe, "vpfe_calculate_offsets\n");
+
+ vpfe_ccdc_get_image_window(&vpfe->ccdc, &image_win);
+ vpfe->field_off = image_win.height * image_win.width;
+}
+
+/*
+ * vpfe_queue_setup - Callback function for buffer setup.
+ * @vq: vb2_queue ptr
+ * @fmt: v4l2 format
+ * @nbuffers: ptr to number of buffers requested by application
+ * @nplanes:: contains number of distinct video planes needed to hold a frame
+ * @sizes[]: contains the size (in bytes) of each plane.
+ * @alloc_ctxs: ptr to allocation context
+ *
+ * This callback function is called when reqbuf() is called to adjust
+ * the buffer count and buffer size
+ */
+static int vpfe_queue_setup(struct vb2_queue *vq,
+ const struct v4l2_format *fmt,
+ unsigned int *nbuffers, unsigned int *nplanes,
+ unsigned int sizes[], void *alloc_ctxs[])
+{
+ struct vpfe_device *vpfe = vb2_get_drv_priv(vq);
+
+ if (fmt && fmt->fmt.pix.sizeimage < vpfe->fmt.fmt.pix.sizeimage)
+ return -EINVAL;
+
+ if (vq->num_buffers + *nbuffers < 3)
+ *nbuffers = 3 - vq->num_buffers;
+
+ *nplanes = 1;
+ sizes[0] = fmt ? fmt->fmt.pix.sizeimage : vpfe->fmt.fmt.pix.sizeimage;
+ alloc_ctxs[0] = vpfe->alloc_ctx;
+
+ vpfe_dbg(1, vpfe,
+ "nbuffers=%d, size=%u\n", *nbuffers, sizes[0]);
+
+ /* Calculate field offset */
+ vpfe_calculate_offsets(vpfe);
+
+ return 0;
+}
+
+/*
+ * vpfe_buffer_prepare : callback function for buffer prepare
+ * @vb: ptr to vb2_buffer
+ *
+ * This is the callback function for buffer prepare when vb2_qbuf()
+ * function is called. The buffer is prepared and user space virtual address
+ * or user address is converted into physical address
+ */
+static int vpfe_buffer_prepare(struct vb2_buffer *vb)
+{
+ struct vpfe_device *vpfe = vb2_get_drv_priv(vb->vb2_queue);
+
+ vb2_set_plane_payload(vb, 0, vpfe->fmt.fmt.pix.sizeimage);
+
+ if (vb2_get_plane_payload(vb, 0) > vb2_plane_size(vb, 0))
+ return -EINVAL;
+
+ vb->v4l2_buf.field = vpfe->fmt.fmt.pix.field;
+
+ return 0;
+}
+
+/*
+ * vpfe_buffer_queue : Callback function to add buffer to DMA queue
+ * @vb: ptr to vb2_buffer
+ */
+static void vpfe_buffer_queue(struct vb2_buffer *vb)
+{
+ struct vpfe_device *vpfe = vb2_get_drv_priv(vb->vb2_queue);
+ struct vpfe_cap_buffer *buf = to_vpfe_buffer(vb);
+ unsigned long flags = 0;
+
+ /* add the buffer to the DMA queue */
+ spin_lock_irqsave(&vpfe->dma_queue_lock, flags);
+ list_add_tail(&buf->list, &vpfe->dma_queue);
+ spin_unlock_irqrestore(&vpfe->dma_queue_lock, flags);
+}
+
+/*
+ * vpfe_start_streaming : Starts the DMA engine for streaming
+ * @vb: ptr to vb2_buffer
+ * @count: number of buffers
+ */
+static int vpfe_start_streaming(struct vb2_queue *vq, unsigned int count)
+{
+ struct vpfe_device *vpfe = vb2_get_drv_priv(vq);
+ struct vpfe_cap_buffer *buf, *tmp;
+ struct vpfe_subdev_info *sdinfo;
+ unsigned long addr = 0;
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(&vpfe->dma_queue_lock, flags);
+
+ vpfe->field_id = 0;
+
+ sdinfo = vpfe->current_subdev;
+ ret = v4l2_subdev_call(sdinfo->sd, video, s_stream, 1);
+ if (ret < 0) {
+ vpfe_err(vpfe, "Error in attaching interrupt handle\n");
+ goto err;
+ }
+
+ vpfe_attach_irq(vpfe);
+
+ if (vpfe->ccdc.ccdc_cfg.if_type == VPFE_RAW_BAYER)
+ vpfe_ccdc_config_raw(&vpfe->ccdc);
+ else
+ vpfe_ccdc_config_ycbcr(&vpfe->ccdc);
+
+ /* Get the next frame from the buffer queue */
+ vpfe->next_frm = list_entry(vpfe->dma_queue.next,
+ struct vpfe_cap_buffer, list);
+ vpfe->cur_frm = vpfe->next_frm;
+ /* Remove buffer from the buffer queue */
+ list_del(&vpfe->cur_frm->list);
+ spin_unlock_irqrestore(&vpfe->dma_queue_lock, flags);
+
+ addr = vb2_dma_contig_plane_dma_addr(&vpfe->cur_frm->vb, 0);
+
+ v4l2_get_timestamp(&vpfe->cur_frm->vb.v4l2_buf.timestamp);
+
+ vpfe_set_sdr_addr(&vpfe->ccdc, (unsigned long)(addr));
+
+ vpfe_pcr_enable(&vpfe->ccdc, 1);
+
+ return 0;
+
+err:
+ list_for_each_entry_safe(buf, tmp, &vpfe->dma_queue, list) {
+ list_del(&buf->list);
+ vb2_buffer_done(&buf->vb, VB2_BUF_STATE_QUEUED);
+ }
+ spin_unlock_irqrestore(&vpfe->dma_queue_lock, flags);
+
+ return ret;
+}
+
+/*
+ * vpfe_stop_streaming : Stop the DMA engine
+ * @vq: ptr to vb2_queue
+ *
+ * This callback stops the DMA engine and any remaining buffers
+ * in the DMA queue are released.
+ */
+static void vpfe_stop_streaming(struct vb2_queue *vq)
+{
+ struct vpfe_device *vpfe = vb2_get_drv_priv(vq);
+ struct vpfe_subdev_info *sdinfo;
+ unsigned long flags;
+ int ret;
+
+ vpfe_pcr_enable(&vpfe->ccdc, 0);
+
+ vpfe_detach_irq(vpfe);
+
+ sdinfo = vpfe->current_subdev;
+ ret = v4l2_subdev_call(sdinfo->sd, video, s_stream, 0);
+ if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV)
+ vpfe_dbg(1, vpfe, "stream off failed in subdev\n");
+
+ /* release all active buffers */
+ spin_lock_irqsave(&vpfe->dma_queue_lock, flags);
+ if (vpfe->cur_frm == vpfe->next_frm) {
+ vb2_buffer_done(&vpfe->cur_frm->vb, VB2_BUF_STATE_ERROR);
+ } else {
+ if (vpfe->cur_frm != NULL)
+ vb2_buffer_done(&vpfe->cur_frm->vb,
+ VB2_BUF_STATE_ERROR);
+ if (vpfe->next_frm != NULL)
+ vb2_buffer_done(&vpfe->next_frm->vb,
+ VB2_BUF_STATE_ERROR);
+ }
+
+ while (!list_empty(&vpfe->dma_queue)) {
+ vpfe->next_frm = list_entry(vpfe->dma_queue.next,
+ struct vpfe_cap_buffer, list);
+ list_del(&vpfe->next_frm->list);
+ vb2_buffer_done(&vpfe->next_frm->vb, VB2_BUF_STATE_ERROR);
+ }
+ spin_unlock_irqrestore(&vpfe->dma_queue_lock, flags);
+}
+
+static int vpfe_cropcap(struct file *file, void *priv,
+ struct v4l2_cropcap *crop)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+
+ vpfe_dbg(2, vpfe, "vpfe_cropcap\n");
+
+ if (vpfe->std_index >= ARRAY_SIZE(vpfe_standards))
+ return -EINVAL;
+
+ memset(crop, 0, sizeof(struct v4l2_cropcap));
+
+ crop->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ crop->defrect.width = vpfe_standards[vpfe->std_index].width;
+ crop->bounds.width = crop->defrect.width;
+ crop->defrect.height = vpfe_standards[vpfe->std_index].height;
+ crop->bounds.height = crop->defrect.height;
+ crop->pixelaspect = vpfe_standards[vpfe->std_index].pixelaspect;
+
+ return 0;
+}
+
+static int
+vpfe_g_selection(struct file *file, void *fh, struct v4l2_selection *s)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+
+ switch (s->target) {
+ case V4L2_SEL_TGT_COMPOSE_DEFAULT:
+ case V4L2_SEL_TGT_COMPOSE_BOUNDS:
+ case V4L2_SEL_TGT_CROP_BOUNDS:
+ case V4L2_SEL_TGT_CROP_DEFAULT:
+ s->r.left = s->r.top = 0;
+ s->r.width = vpfe->crop.width;
+ s->r.height = vpfe->crop.height;
+ break;
+
+ case V4L2_SEL_TGT_COMPOSE:
+ case V4L2_SEL_TGT_CROP:
+ s->r = vpfe->crop;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int enclosed_rectangle(struct v4l2_rect *a, struct v4l2_rect *b)
+{
+ if (a->left < b->left || a->top < b->top)
+ return 0;
+
+ if (a->left + a->width > b->left + b->width)
+ return 0;
+
+ if (a->top + a->height > b->top + b->height)
+ return 0;
+
+ return 1;
+}
+
+static int
+vpfe_s_selection(struct file *file, void *fh, struct v4l2_selection *s)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+ struct v4l2_rect cr = vpfe->crop;
+ struct v4l2_rect r = s->r;
+
+ v4l_bound_align_image(&r.width, 0, cr.width, 0,
+ &r.height, 0, cr.height, 0, 0);
+
+ r.left = clamp_t(unsigned int, r.left, 0, cr.width - r.width);
+ r.top = clamp_t(unsigned int, r.top, 0, cr.height - r.height);
+
+ if (s->flags & V4L2_SEL_FLAG_LE && !enclosed_rectangle(&r, &s->r))
+ return -ERANGE;
+
+ if (s->flags & V4L2_SEL_FLAG_GE && !enclosed_rectangle(&s->r, &r))
+ return -ERANGE;
+
+ s->r = vpfe->crop = r;
+
+ vpfe_ccdc_set_image_window(&vpfe->ccdc, &r, vpfe->bpp);
+ vpfe->fmt.fmt.pix.width = r.width;
+ vpfe->fmt.fmt.pix.height = r.height;
+ vpfe->fmt.fmt.pix.bytesperline = vpfe_ccdc_get_line_length(&vpfe->ccdc);
+ vpfe->fmt.fmt.pix.sizeimage = vpfe->fmt.fmt.pix.bytesperline *
+ vpfe->fmt.fmt.pix.height;
+
+ vpfe_dbg(1, vpfe, "cropped (%d,%d)/%dx%d of %dx%d\n",
+ r.left, r.top, r.width, r.height, cr.width, cr.height);
+
+ return 0;
+}
+
+static long vpfe_ioctl_default(struct file *file, void *priv,
+ bool valid_prio, unsigned int cmd, void *param)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+ int ret;
+
+ vpfe_dbg(2, vpfe, "vpfe_ioctl_default\n");
+
+ if (!valid_prio) {
+ vpfe_err(vpfe, "%s device busy\n", __func__);
+ return -EBUSY;
+ }
+
+ /* If streaming is started, return error */
+ if (vb2_is_busy(&vpfe->buffer_queue)) {
+ vpfe_err(vpfe, "%s device busy\n", __func__);
+ return -EBUSY;
+ }
+
+ switch (cmd) {
+ case VIDIOC_AM437X_CCDC_CFG:
+ ret = vpfe_ccdc_set_params(&vpfe->ccdc, param);
+ if (ret) {
+ vpfe_dbg(2, vpfe,
+ "Error setting parameters in CCDC\n");
+ return ret;
+ }
+ ret = vpfe_get_ccdc_image_format(vpfe,
+ &vpfe->fmt);
+ if (ret < 0) {
+ vpfe_dbg(2, vpfe,
+ "Invalid image format at CCDC\n");
+ return ret;
+ }
+ break;
+ default:
+ ret = -ENOTTY;
+ }
+
+ return ret;
+}
+
+static const struct vb2_ops vpfe_video_qops = {
+ .wait_prepare = vb2_ops_wait_prepare,
+ .wait_finish = vb2_ops_wait_finish,
+ .queue_setup = vpfe_queue_setup,
+ .buf_prepare = vpfe_buffer_prepare,
+ .buf_queue = vpfe_buffer_queue,
+ .start_streaming = vpfe_start_streaming,
+ .stop_streaming = vpfe_stop_streaming,
+};
+
+/* vpfe capture driver file operations */
+static const struct v4l2_file_operations vpfe_fops = {
+ .owner = THIS_MODULE,
+ .open = vpfe_open,
+ .release = vpfe_release,
+ .read = vb2_fop_read,
+ .poll = vb2_fop_poll,
+ .unlocked_ioctl = video_ioctl2,
+ .mmap = vb2_fop_mmap,
+
+};
+
+/* vpfe capture ioctl operations */
+static const struct v4l2_ioctl_ops vpfe_ioctl_ops = {
+ .vidioc_querycap = vpfe_querycap,
+ .vidioc_enum_fmt_vid_cap = vpfe_enum_fmt,
+ .vidioc_g_fmt_vid_cap = vpfe_g_fmt,
+ .vidioc_s_fmt_vid_cap = vpfe_s_fmt,
+ .vidioc_try_fmt_vid_cap = vpfe_try_fmt,
+
+ .vidioc_enum_framesizes = vpfe_enum_size,
+
+ .vidioc_enum_input = vpfe_enum_input,
+ .vidioc_g_input = vpfe_g_input,
+ .vidioc_s_input = vpfe_s_input,
+
+ .vidioc_querystd = vpfe_querystd,
+ .vidioc_s_std = vpfe_s_std,
+ .vidioc_g_std = vpfe_g_std,
+
+ .vidioc_reqbufs = vb2_ioctl_reqbufs,
+ .vidioc_create_bufs = vb2_ioctl_create_bufs,
+ .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
+ .vidioc_querybuf = vb2_ioctl_querybuf,
+ .vidioc_qbuf = vb2_ioctl_qbuf,
+ .vidioc_dqbuf = vb2_ioctl_dqbuf,
+ .vidioc_expbuf = vb2_ioctl_expbuf,
+ .vidioc_streamon = vb2_ioctl_streamon,
+ .vidioc_streamoff = vb2_ioctl_streamoff,
+
+ .vidioc_log_status = v4l2_ctrl_log_status,
+ .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+ .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+
+ .vidioc_cropcap = vpfe_cropcap,
+ .vidioc_g_selection = vpfe_g_selection,
+ .vidioc_s_selection = vpfe_s_selection,
+
+ .vidioc_default = vpfe_ioctl_default,
+};
+
+static const struct video_device vpfe_videodev = {
+ .name = VPFE_MODULE_NAME,
+ .fops = &vpfe_fops,
+ .ioctl_ops = &vpfe_ioctl_ops,
+ .minor = -1,
+ .release = video_device_release,
+ .tvnorms = 0,
+};
+
+static int
+vpfe_async_bound(struct v4l2_async_notifier *notifier,
+ struct v4l2_subdev *subdev,
+ struct v4l2_async_subdev *asd)
+{
+ struct vpfe_device *vpfe = container_of(notifier->v4l2_dev,
+ struct vpfe_device, v4l2_dev);
+ struct vpfe_subdev_info *sdinfo;
+ int i, j;
+
+ vpfe_dbg(1, vpfe, "vpfe_async_bound\n");
+
+ for (i = 0; i < ARRAY_SIZE(vpfe->cfg->asd); i++) {
+ sdinfo = &vpfe->cfg->sub_devs[i];
+
+ if (!strcmp(sdinfo->name, subdev->name)) {
+ vpfe->sd[i] = subdev;
+ vpfe_info(vpfe,
+ "v4l2 sub device %s registered\n",
+ subdev->name);
+ vpfe->sd[i]->grp_id =
+ sdinfo->grp_id;
+ /* update tvnorms from the sub devices */
+ for (j = 0; j < 1; j++)
+ vpfe->video_dev->tvnorms |=
+ sdinfo->inputs[j].std;
+ return 0;
+ }
+ }
+
+ vpfe_info(vpfe, "vpfe_async_bound sub device (%s) not matched\n",
+ subdev->name);
+
+ return -EINVAL;
+}
+
+static int vpfe_probe_complete(struct vpfe_device *vpfe)
+{
+ struct video_device *vfd;
+ struct vb2_queue *q;
+ int err;
+
+ spin_lock_init(&vpfe->dma_queue_lock);
+ mutex_init(&vpfe->lock);
+
+ vpfe->fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+ /* set first sub device as current one */
+ vpfe->current_subdev = &vpfe->cfg->sub_devs[0];
+ vpfe->v4l2_dev.ctrl_handler = vpfe->sd[0]->ctrl_handler;
+
+ /* Initialize videobuf2 queue as per the buffer type */
+ vpfe->alloc_ctx = vb2_dma_contig_init_ctx(vpfe->pdev);
+ if (IS_ERR(vpfe->alloc_ctx)) {
+ vpfe_err(vpfe, "Failed to get the context\n");
+ err = PTR_ERR(vpfe->alloc_ctx);
+ goto probe_out;
+ }
+
+ q = &vpfe->buffer_queue;
+ q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ q->io_modes = VB2_MMAP | VB2_DMABUF | VB2_READ;
+ q->drv_priv = vpfe;
+ q->ops = &vpfe_video_qops;
+ q->mem_ops = &vb2_dma_contig_memops;
+ q->buf_struct_size = sizeof(struct vpfe_cap_buffer);
+ q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+ q->lock = &vpfe->lock;
+ q->min_buffers_needed = 1;
+
+ err = vb2_queue_init(q);
+ if (err) {
+ vpfe_err(vpfe, "vb2_queue_init() failed\n");
+ vb2_dma_contig_cleanup_ctx(vpfe->alloc_ctx);
+ goto probe_out;
+ }
+
+ INIT_LIST_HEAD(&vpfe->dma_queue);
+
+ vfd = vpfe->video_dev;
+ /* Pass on debug flag if it is high enough */
+ vfd->debug = (debug >= 4)?1:0;
+ vfd->queue = q;
+
+ /*
+ * Provide a mutex to v4l2 core. It will be used to protect
+ * all fops and v4l2 ioctls.
+ */
+ vfd->lock = &vpfe->lock;
+ /* set video driver private data */
+ video_set_drvdata(vfd, vpfe);
+
+ /* select input 0 */
+ err = vpfe_set_input(vpfe, 0);
+ if (err)
+ goto probe_out;
+
+ err = video_register_device(vpfe->video_dev, VFL_TYPE_GRABBER, -1);
+ if (err) {
+ vpfe_err(vpfe,
+ "Unable to register video device.\n");
+ goto probe_out;
+ }
+
+ return 0;
+
+probe_out:
+ v4l2_device_unregister(&vpfe->v4l2_dev);
+ return err;
+}
+
+static int vpfe_async_complete(struct v4l2_async_notifier *notifier)
+{
+ struct vpfe_device *vpfe = container_of(notifier->v4l2_dev,
+ struct vpfe_device, v4l2_dev);
+
+ return vpfe_probe_complete(vpfe);
+}
+
+static struct vpfe_config *
+vpfe_get_pdata(struct platform_device *pdev)
+{
+ struct device_node *endpoint = NULL, *rem = NULL;
+ struct v4l2_of_endpoint bus_cfg;
+ struct vpfe_subdev_info *sdinfo;
+ struct vpfe_config *pdata;
+ unsigned int flags;
+ unsigned int i;
+ int err;
+
+ dev_dbg(&pdev->dev, "vpfe_get_pdata\n");
+
+ if (!IS_ENABLED(CONFIG_OF) || !pdev->dev.of_node)
+ return pdev->dev.platform_data;
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return NULL;
+
+ for (i = 0; ; i++) {
+ endpoint = of_graph_get_next_endpoint(pdev->dev.of_node,
+ endpoint);
+ if (!endpoint)
+ break;
+
+ sdinfo = &pdata->sub_devs[i];
+ sdinfo->grp_id = 0;
+
+ /* we only support camera */
+ sdinfo->inputs[0].index = i;
+ strcpy(sdinfo->inputs[0].name, "camera");
+ sdinfo->inputs[0].type = V4L2_INPUT_TYPE_CAMERA;
+ sdinfo->inputs[0].std = V4L2_STD_ALL;
+ sdinfo->inputs[0].capabilities = V4L2_IN_CAP_STD;
+
+ sdinfo->can_route = 0;
+ sdinfo->routes = NULL;
+
+ of_property_read_u32(endpoint, "ti,am437x-vpfe-interface",
+ &sdinfo->vpfe_param.if_type);
+ if (sdinfo->vpfe_param.if_type < 0 ||
+ sdinfo->vpfe_param.if_type > 4) {
+ sdinfo->vpfe_param.if_type = VPFE_RAW_BAYER;
+ }
+
+ err = v4l2_of_parse_endpoint(endpoint, &bus_cfg);
+ if (err) {
+ dev_err(&pdev->dev, "Could not parse the endpoint\n");
+ goto done;
+ }
+
+ sdinfo->vpfe_param.bus_width = bus_cfg.bus.parallel.bus_width;
+
+ if (sdinfo->vpfe_param.bus_width < 8 ||
+ sdinfo->vpfe_param.bus_width > 16) {
+ dev_err(&pdev->dev, "Invalid bus width.\n");
+ goto done;
+ }
+
+ flags = bus_cfg.bus.parallel.flags;
+
+ if (flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
+ sdinfo->vpfe_param.hdpol = 1;
+
+ if (flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
+ sdinfo->vpfe_param.vdpol = 1;
+
+ rem = of_graph_get_remote_port_parent(endpoint);
+ if (!rem) {
+ dev_err(&pdev->dev, "Remote device at %s not found\n",
+ endpoint->full_name);
+ goto done;
+ }
+
+ strncpy(sdinfo->name, rem->name, sizeof(sdinfo->name));
+
+ pdata->asd[i] = devm_kzalloc(&pdev->dev,
+ sizeof(struct v4l2_async_subdev),
+ GFP_KERNEL);
+ pdata->asd[i]->match_type = V4L2_ASYNC_MATCH_OF;
+ pdata->asd[i]->match.of.node = rem;
+ of_node_put(endpoint);
+ of_node_put(rem);
+ }
+
+ of_node_put(endpoint);
+ return pdata;
+
+done:
+ of_node_put(endpoint);
+ of_node_put(rem);
+ return NULL;
+}
+
+/*
+ * vpfe_probe : This function creates device entries by register
+ * itself to the V4L2 driver and initializes fields of each
+ * device objects
+ */
+static int vpfe_probe(struct platform_device *pdev)
+{
+ struct vpfe_config *vpfe_cfg = vpfe_get_pdata(pdev);
+ struct video_device *vfd;
+ struct vpfe_device *vpfe;
+ struct vpfe_ccdc *ccdc;
+ struct resource *res;
+ int ret;
+
+ if (!vpfe_cfg) {
+ dev_err(&pdev->dev, "No platform data\n");
+ return -EINVAL;
+ }
+
+ vpfe = devm_kzalloc(&pdev->dev, sizeof(*vpfe), GFP_KERNEL);
+ if (!vpfe)
+ return -ENOMEM;
+
+ vpfe->pdev = &pdev->dev;
+ vpfe->cfg = vpfe_cfg;
+ ccdc = &vpfe->ccdc;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ ccdc->ccdc_cfg.base_addr = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(ccdc->ccdc_cfg.base_addr))
+ return PTR_ERR(ccdc->ccdc_cfg.base_addr);
+
+ vpfe->irq = platform_get_irq(pdev, 0);
+ if (vpfe->irq <= 0) {
+ dev_err(&pdev->dev, "No IRQ resource\n");
+ return -ENODEV;
+ }
+
+ ret = devm_request_irq(vpfe->pdev, vpfe->irq, vpfe_isr, 0,
+ "vpfe_capture0", vpfe);
+ if (ret) {
+ dev_err(&pdev->dev, "Unable to request interrupt\n");
+ return -EINVAL;
+ }
+
+ vfd = video_device_alloc();
+ if (!vfd) {
+ dev_err(&pdev->dev, "Unable to alloc video device\n");
+ return -ENOMEM;
+ }
+
+ /* Initialize field of video device */
+ *vfd = vpfe_videodev;
+
+ /* Set video_dev to the video device */
+ vpfe->video_dev = vfd;
+
+ ret = v4l2_device_register(&pdev->dev, &vpfe->v4l2_dev);
+ if (ret) {
+ vpfe_err(vpfe,
+ "Unable to register v4l2 device.\n");
+ goto probe_out_video_release;
+ }
+
+ /* set the driver data in platform device */
+ platform_set_drvdata(pdev, vpfe);
+
+ vfd->v4l2_dev = &vpfe->v4l2_dev;
+
+ /* Enabling module functional clock */
+ pm_runtime_enable(&pdev->dev);
+
+ /* for now just enable it here instead of waiting for the open */
+ pm_runtime_get_sync(&pdev->dev);
+
+ vpfe_ccdc_config_defaults(ccdc);
+
+ pm_runtime_put_sync(&pdev->dev);
+
+ vpfe->sd = kmalloc(sizeof(struct v4l2_subdev *) *
+ ARRAY_SIZE(vpfe->cfg->asd), GFP_KERNEL);
+ if (!vpfe->sd) {
+ ret = -ENOMEM;
+ goto probe_out_v4l2_unregister;
+ }
+
+ vpfe->notifier.subdevs = vpfe->cfg->asd;
+ vpfe->notifier.num_subdevs = ARRAY_SIZE(vpfe->cfg->asd);
+ vpfe->notifier.bound = vpfe_async_bound;
+ vpfe->notifier.complete = vpfe_async_complete;
+ ret = v4l2_async_notifier_register(&vpfe->v4l2_dev,
+ &vpfe->notifier);
+ if (ret) {
+ vpfe_err(vpfe, "Error registering async notifier\n");
+ ret = -EINVAL;
+ goto probe_sd_out;
+ }
+
+ return 0;
+
+probe_sd_out:
+ kfree(vpfe->sd);
+probe_out_v4l2_unregister:
+ v4l2_device_unregister(&vpfe->v4l2_dev);
+probe_out_video_release:
+ if (!video_is_registered(vpfe->video_dev))
+ video_device_release(vpfe->video_dev);
+ return ret;
+}
+
+/*
+ * vpfe_remove : It un-register device from V4L2 driver
+ */
+static int vpfe_remove(struct platform_device *pdev)
+{
+ struct vpfe_device *vpfe = platform_get_drvdata(pdev);
+
+ vpfe_dbg(2, vpfe, "vpfe_remove\n");
+
+ pm_runtime_disable(&pdev->dev);
+
+ v4l2_async_notifier_unregister(&vpfe->notifier);
+ kfree(vpfe->sd);
+ v4l2_device_unregister(&vpfe->v4l2_dev);
+ video_unregister_device(vpfe->video_dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+static void vpfe_save_context(struct vpfe_ccdc *ccdc)
+{
+ ccdc->ccdc_ctx[VPFE_PCR >> 2] = vpfe_reg_read(ccdc, VPFE_PCR);
+ ccdc->ccdc_ctx[VPFE_SYNMODE >> 2] = vpfe_reg_read(ccdc, VPFE_SYNMODE);
+ ccdc->ccdc_ctx[VPFE_SDOFST >> 2] = vpfe_reg_read(ccdc, VPFE_SDOFST);
+ ccdc->ccdc_ctx[VPFE_SDR_ADDR >> 2] = vpfe_reg_read(ccdc, VPFE_SDR_ADDR);
+ ccdc->ccdc_ctx[VPFE_CLAMP >> 2] = vpfe_reg_read(ccdc, VPFE_CLAMP);
+ ccdc->ccdc_ctx[VPFE_DCSUB >> 2] = vpfe_reg_read(ccdc, VPFE_DCSUB);
+ ccdc->ccdc_ctx[VPFE_COLPTN >> 2] = vpfe_reg_read(ccdc, VPFE_COLPTN);
+ ccdc->ccdc_ctx[VPFE_BLKCMP >> 2] = vpfe_reg_read(ccdc, VPFE_BLKCMP);
+ ccdc->ccdc_ctx[VPFE_VDINT >> 2] = vpfe_reg_read(ccdc, VPFE_VDINT);
+ ccdc->ccdc_ctx[VPFE_ALAW >> 2] = vpfe_reg_read(ccdc, VPFE_ALAW);
+ ccdc->ccdc_ctx[VPFE_REC656IF >> 2] = vpfe_reg_read(ccdc, VPFE_REC656IF);
+ ccdc->ccdc_ctx[VPFE_CCDCFG >> 2] = vpfe_reg_read(ccdc, VPFE_CCDCFG);
+ ccdc->ccdc_ctx[VPFE_CULLING >> 2] = vpfe_reg_read(ccdc, VPFE_CULLING);
+ ccdc->ccdc_ctx[VPFE_HD_VD_WID >> 2] = vpfe_reg_read(ccdc,
+ VPFE_HD_VD_WID);
+ ccdc->ccdc_ctx[VPFE_PIX_LINES >> 2] = vpfe_reg_read(ccdc,
+ VPFE_PIX_LINES);
+ ccdc->ccdc_ctx[VPFE_HORZ_INFO >> 2] = vpfe_reg_read(ccdc,
+ VPFE_HORZ_INFO);
+ ccdc->ccdc_ctx[VPFE_VERT_START >> 2] = vpfe_reg_read(ccdc,
+ VPFE_VERT_START);
+ ccdc->ccdc_ctx[VPFE_VERT_LINES >> 2] = vpfe_reg_read(ccdc,
+ VPFE_VERT_LINES);
+ ccdc->ccdc_ctx[VPFE_HSIZE_OFF >> 2] = vpfe_reg_read(ccdc,
+ VPFE_HSIZE_OFF);
+}
+
+static int vpfe_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct vpfe_device *vpfe = platform_get_drvdata(pdev);
+ struct vpfe_ccdc *ccdc = &vpfe->ccdc;
+
+ /* if streaming has not started we dont care */
+ if (!vb2_start_streaming_called(&vpfe->buffer_queue))
+ return 0;
+
+ pm_runtime_get_sync(dev);
+ vpfe_config_enable(ccdc, 1);
+
+ /* Save VPFE context */
+ vpfe_save_context(ccdc);
+
+ /* Disable CCDC */
+ vpfe_pcr_enable(ccdc, 0);
+ vpfe_config_enable(ccdc, 0);
+
+ /* Disable both master and slave clock */
+ pm_runtime_put_sync(dev);
+
+ /* Select sleep pin state */
+ pinctrl_pm_select_sleep_state(dev);
+
+ return 0;
+}
+
+static void vpfe_restore_context(struct vpfe_ccdc *ccdc)
+{
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_SYNMODE >> 2], VPFE_SYNMODE);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_CULLING >> 2], VPFE_CULLING);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_SDOFST >> 2], VPFE_SDOFST);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_SDR_ADDR >> 2], VPFE_SDR_ADDR);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_CLAMP >> 2], VPFE_CLAMP);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_DCSUB >> 2], VPFE_DCSUB);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_COLPTN >> 2], VPFE_COLPTN);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_BLKCMP >> 2], VPFE_BLKCMP);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_VDINT >> 2], VPFE_VDINT);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_ALAW >> 2], VPFE_ALAW);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_REC656IF >> 2], VPFE_REC656IF);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_CCDCFG >> 2], VPFE_CCDCFG);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_PCR >> 2], VPFE_PCR);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_HD_VD_WID >> 2],
+ VPFE_HD_VD_WID);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_PIX_LINES >> 2],
+ VPFE_PIX_LINES);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_HORZ_INFO >> 2],
+ VPFE_HORZ_INFO);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_VERT_START >> 2],
+ VPFE_VERT_START);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_VERT_LINES >> 2],
+ VPFE_VERT_LINES);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_HSIZE_OFF >> 2],
+ VPFE_HSIZE_OFF);
+}
+
+static int vpfe_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct vpfe_device *vpfe = platform_get_drvdata(pdev);
+ struct vpfe_ccdc *ccdc = &vpfe->ccdc;
+
+ /* if streaming has not started we dont care */
+ if (!vb2_start_streaming_called(&vpfe->buffer_queue))
+ return 0;
+
+ /* Enable both master and slave clock */
+ pm_runtime_get_sync(dev);
+ vpfe_config_enable(ccdc, 1);
+
+ /* Restore VPFE context */
+ vpfe_restore_context(ccdc);
+
+ vpfe_config_enable(ccdc, 0);
+ pm_runtime_put_sync(dev);
+
+ /* Select default pin state */
+ pinctrl_pm_select_default_state(dev);
+
+ return 0;
+}
+
+#endif
+
+static SIMPLE_DEV_PM_OPS(vpfe_pm_ops, vpfe_suspend, vpfe_resume);
+
+static const struct of_device_id vpfe_of_match[] = {
+ { .compatible = "ti,am437x-vpfe", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, vpfe_of_match);
+
+static struct platform_driver vpfe_driver = {
+ .probe = vpfe_probe,
+ .remove = vpfe_remove,
+ .driver = {
+ .name = VPFE_MODULE_NAME,
+ .owner = THIS_MODULE,
+ .pm = &vpfe_pm_ops,
+ .of_match_table = of_match_ptr(vpfe_of_match),
+ },
+};
+
+module_platform_driver(vpfe_driver);
+
+MODULE_AUTHOR("Texas Instruments");
+MODULE_DESCRIPTION("TI AM437x VPFE driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(VPFE_VERSION);
diff --git a/drivers/media/platform/am437x/vpfe.h b/drivers/media/platform/am437x/vpfe.h
new file mode 100644
index 0000000..20bf385
--- /dev/null
+++ b/drivers/media/platform/am437x/vpfe.h
@@ -0,0 +1,286 @@
+/*
+ * Copyright (C) 2013 - 2014 Texas Instruments, Inc.
+ *
+ * Benoit Parrot <bparrot-l0cyMroinI0@public.gmane.org>
+ * Lad, Prabhakar <prabhakar.csengg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef AM437X_VPFE_H
+#define AM437X_VPFE_H
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/videodev2.h>
+#include <linux/am437x_vpfe.h>
+
+#include <media/v4l2-dev.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
+#include <media/videobuf2-dma-contig.h>
+
+#include "vpfe_regs.h"
+
+enum vpfe_pin_pol {
+ VPFE_PINPOL_POSITIVE,
+ VPFE_PINPOL_NEGATIVE
+};
+
+enum vpfe_hw_if_type {
+ /* Raw Bayer */
+ VPFE_RAW_BAYER = 0,
+ /* BT656 - 8 bit */
+ VPFE_BT656,
+ /* BT656 - 10 bit */
+ VPFE_BT656_10BIT,
+ /* YCbCr - 8 bit with external sync */
+ VPFE_YCBCR_SYNC_8,
+ /* YCbCr - 16 bit with external sync */
+ VPFE_YCBCR_SYNC_16,
+};
+
+/* interface description */
+struct vpfe_hw_if_param {
+ enum vpfe_hw_if_type if_type;
+ enum vpfe_pin_pol hdpol;
+ enum vpfe_pin_pol vdpol;
+ unsigned int bus_width;
+};
+
+#define VPFE_MAX_SUBDEV 1
+#define VPFE_MAX_INPUTS 1
+
+struct vpfe_pixel_format {
+ struct v4l2_fmtdesc fmtdesc;
+ /* bytes per pixel */
+ int bpp;
+};
+
+struct vpfe_std_info {
+ int active_pixels;
+ int active_lines;
+ /* current frame format */
+ int frame_format;
+};
+
+struct vpfe_route {
+ u32 input;
+ u32 output;
+};
+
+struct vpfe_subdev_info {
+ char name[32];
+ /* Sub device group id */
+ int grp_id;
+ /* inputs available at the sub device */
+ struct v4l2_input inputs[VPFE_MAX_INPUTS];
+ /* Sub dev routing information for each input */
+ struct vpfe_route *routes;
+ /* check if sub dev supports routing */
+ int can_route;
+ /* ccdc bus/interface configuration */
+ struct vpfe_hw_if_param vpfe_param;
+ struct v4l2_subdev *sd;
+};
+
+struct vpfe_config {
+ /* information about each subdev */
+ struct vpfe_subdev_info sub_devs[VPFE_MAX_SUBDEV];
+ /* Flat array, arranged in groups */
+ struct v4l2_async_subdev *asd[VPFE_MAX_SUBDEV];
+};
+
+struct vpfe_cap_buffer {
+ struct vb2_buffer vb;
+ struct list_head list;
+};
+
+enum ccdc_pixfmt {
+ CCDC_PIXFMT_RAW = 0,
+ CCDC_PIXFMT_YCBCR_16BIT,
+ CCDC_PIXFMT_YCBCR_8BIT,
+};
+
+enum ccdc_frmfmt {
+ CCDC_FRMFMT_PROGRESSIVE = 0,
+ CCDC_FRMFMT_INTERLACED,
+};
+
+/* PIXEL ORDER IN MEMORY from LSB to MSB */
+/* only applicable for 8-bit input mode */
+enum ccdc_pixorder {
+ CCDC_PIXORDER_YCBYCR,
+ CCDC_PIXORDER_CBYCRY,
+};
+
+enum ccdc_buftype {
+ CCDC_BUFTYPE_FLD_INTERLEAVED,
+ CCDC_BUFTYPE_FLD_SEPARATED
+};
+
+
+/* returns the highest bit used for the gamma */
+static inline u8 ccdc_gamma_width_max_bit(enum vpfe_ccdc_gamma_width width)
+{
+ return 15 - width;
+}
+
+/* returns the highest bit used for this data size */
+static inline u8 ccdc_data_size_max_bit(enum vpfe_ccdc_data_size sz)
+{
+ return sz == VPFE_CCDC_DATA_8BITS ? 7 : 15 - sz;
+}
+
+/* Structure for CCDC configuration parameters for raw capture mode */
+struct ccdc_params_raw {
+ /* pixel format */
+ enum ccdc_pixfmt pix_fmt;
+ /* progressive or interlaced frame */
+ enum ccdc_frmfmt frm_fmt;
+ struct v4l2_rect win;
+ /* Current Format Bytes Per Pixels */
+ unsigned int bytesperpixel;
+ /* Current Format Bytes per Lines
+ * (Aligned to 32 bytes) used for HORZ_INFO
+ */
+ unsigned int bytesperline;
+ /* field id polarity */
+ enum vpfe_pin_pol fid_pol;
+ /* vertical sync polarity */
+ enum vpfe_pin_pol vd_pol;
+ /* horizontal sync polarity */
+ enum vpfe_pin_pol hd_pol;
+ /* interleaved or separated fields */
+ enum ccdc_buftype buf_type;
+ /*
+ * enable to store the image in inverse
+ * order in memory(bottom to top)
+ */
+ unsigned char image_invert_enable;
+ /* configurable paramaters */
+ struct vpfe_ccdc_config_params_raw config_params;
+};
+
+struct ccdc_params_ycbcr {
+ /* pixel format */
+ enum ccdc_pixfmt pix_fmt;
+ /* progressive or interlaced frame */
+ enum ccdc_frmfmt frm_fmt;
+ struct v4l2_rect win;
+ /* Current Format Bytes Per Pixels */
+ unsigned int bytesperpixel;
+ /* Current Format Bytes per Lines
+ * (Aligned to 32 bytes) used for HORZ_INFO
+ */
+ unsigned int bytesperline;
+ /* field id polarity */
+ enum vpfe_pin_pol fid_pol;
+ /* vertical sync polarity */
+ enum vpfe_pin_pol vd_pol;
+ /* horizontal sync polarity */
+ enum vpfe_pin_pol hd_pol;
+ /* enable BT.656 embedded sync mode */
+ int bt656_enable;
+ /* cb:y:cr:y or y:cb:y:cr in memory */
+ enum ccdc_pixorder pix_order;
+ /* interleaved or separated fields */
+ enum ccdc_buftype buf_type;
+};
+
+/*
+ * CCDC operational configuration
+ */
+struct ccdc_config {
+ /* CCDC interface type */
+ enum vpfe_hw_if_type if_type;
+ /* Raw Bayer configuration */
+ struct ccdc_params_raw bayer;
+ /* YCbCr configuration */
+ struct ccdc_params_ycbcr ycbcr;
+ /* ccdc base address */
+ void __iomem *base_addr;
+};
+
+struct vpfe_ccdc {
+ struct ccdc_config ccdc_cfg;
+ u32 ccdc_ctx[VPFE_REG_END / sizeof(u32)];
+};
+
+struct vpfe_device {
+ /* V4l2 specific parameters */
+ /* Identifies video device for this channel */
+ struct video_device *video_dev;
+ /* sub devices */
+ struct v4l2_subdev **sd;
+ /* vpfe cfg */
+ struct vpfe_config *cfg;
+ /* V4l2 device */
+ struct v4l2_device v4l2_dev;
+ /* parent device */
+ struct device *pdev;
+ /* Subdevive Async Notifier */
+ struct v4l2_async_notifier notifier;
+ /* Indicates id of the field which is being displayed */
+ u32 field_id;
+ /* current interface type */
+ struct vpfe_hw_if_param vpfe_if_params;
+ /* ptr to currently selected sub device */
+ struct vpfe_subdev_info *current_subdev;
+ /* current input at the sub device */
+ int current_input;
+ /* Keeps track of the information about the standard */
+ struct vpfe_std_info std_info;
+ /* std index into std table */
+ int std_index;
+ /* IRQs used when CCDC output to SDRAM */
+ unsigned int irq;
+ /* number of buffers in fbuffers */
+ u32 numbuffers;
+ /* List of buffer pointers for storing frames */
+ u8 *fbuffers[VIDEO_MAX_FRAME];
+ /* Pointer pointing to current v4l2_buffer */
+ struct vpfe_cap_buffer *cur_frm;
+ /* Pointer pointing to next v4l2_buffer */
+ struct vpfe_cap_buffer *next_frm;
+ /* Used to store pixel format */
+ struct v4l2_format fmt;
+ /* Used to store current bytes per pixel based on current format */
+ unsigned int bpp;
+ /*
+ * used when IMP is chained to store the crop window which
+ * is different from the image window
+ */
+ struct v4l2_rect crop;
+ /* Buffer queue used in video-buf */
+ struct vb2_queue buffer_queue;
+ /* Allocator-specific contexts for each plane */
+ struct vb2_alloc_ctx *alloc_ctx;
+ /* Queue of filled frames */
+ struct list_head dma_queue;
+ /* IRQ lock for DMA queue */
+ spinlock_t dma_queue_lock;
+ /* lock used to access this structure */
+ struct mutex lock;
+ /*
+ * offset where second field starts from the starting of the
+ * buffer for field separated YCbCr formats
+ */
+ u32 field_off;
+ struct vpfe_ccdc ccdc;
+};
+
+#endif /* AM437X_VPFE_H */
diff --git a/drivers/media/platform/am437x/vpfe_regs.h b/drivers/media/platform/am437x/vpfe_regs.h
new file mode 100644
index 0000000..4a0ed29
--- /dev/null
+++ b/drivers/media/platform/am437x/vpfe_regs.h
@@ -0,0 +1,140 @@
+/*
+ * TI AM437x Image Sensor Interface Registers
+ *
+ * Copyright (C) 2013 - 2014 Texas Instruments, Inc.
+ *
+ * Benoit Parrot <bparrot-l0cyMroinI0@public.gmane.org>
+ * Lad, Prabhakar <prabhakar.csengg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef AM437X_VPFE_REGS_H
+#define AM437X_VPFE_REGS_H
+
+/* VPFE module register offset */
+#define VPFE_REVISION 0x0
+#define VPFE_PCR 0x4
+#define VPFE_SYNMODE 0x8
+#define VPFE_HD_VD_WID 0xc
+#define VPFE_PIX_LINES 0x10
+#define VPFE_HORZ_INFO 0x14
+#define VPFE_VERT_START 0x18
+#define VPFE_VERT_LINES 0x1c
+#define VPFE_CULLING 0x20
+#define VPFE_HSIZE_OFF 0x24
+#define VPFE_SDOFST 0x28
+#define VPFE_SDR_ADDR 0x2c
+#define VPFE_CLAMP 0x30
+#define VPFE_DCSUB 0x34
+#define VPFE_COLPTN 0x38
+#define VPFE_BLKCMP 0x3c
+#define VPFE_VDINT 0x48
+#define VPFE_ALAW 0x4c
+#define VPFE_REC656IF 0x50
+#define VPFE_CCDCFG 0x54
+#define VPFE_DMA_CNTL 0x98
+#define VPFE_SYSCONFIG 0x104
+#define VPFE_CONFIG 0x108
+#define VPFE_IRQ_EOI 0x110
+#define VPFE_IRQ_STS_RAW 0x114
+#define VPFE_IRQ_STS 0x118
+#define VPFE_IRQ_EN_SET 0x11c
+#define VPFE_IRQ_EN_CLR 0x120
+#define VPFE_REG_END 0x124
+
+/* Define bit fields within selected registers */
+#define VPFE_FID_POL_MASK 1
+#define VPFE_FID_POL_SHIFT 4
+#define VPFE_HD_POL_MASK 1
+#define VPFE_HD_POL_SHIFT 3
+#define VPFE_VD_POL_MASK 1
+#define VPFE_VD_POL_SHIFT 2
+#define VPFE_HSIZE_OFF_MASK 0xffffffe0
+#define VPFE_32BYTE_ALIGN_VAL 31
+#define VPFE_FRM_FMT_MASK 0x1
+#define VPFE_FRM_FMT_SHIFT 7
+#define VPFE_DATA_SZ_MASK 7
+#define VPFE_DATA_SZ_SHIFT 8
+#define VPFE_PIX_FMT_MASK 3
+#define VPFE_PIX_FMT_SHIFT 12
+#define VPFE_VP2SDR_DISABLE 0xfffbffff
+#define VPFE_WEN_ENABLE (1 << 17)
+#define VPFE_SDR2RSZ_DISABLE 0xfff7ffff
+#define VPFE_VDHDEN_ENABLE (1 << 16)
+#define VPFE_LPF_ENABLE (1 << 14)
+#define VPFE_ALAW_ENABLE (1 << 3)
+#define VPFE_ALAW_GAMMA_WD_MASK 7
+#define VPFE_BLK_CLAMP_ENABLE (1 << 31)
+#define VPFE_BLK_SGAIN_MASK 0x1f
+#define VPFE_BLK_ST_PXL_MASK 0x7fff
+#define VPFE_BLK_ST_PXL_SHIFT 10
+#define VPFE_BLK_SAMPLE_LN_MASK 7
+#define VPFE_BLK_SAMPLE_LN_SHIFT 28
+#define VPFE_BLK_SAMPLE_LINE_MASK 7
+#define VPFE_BLK_SAMPLE_LINE_SHIFT 25
+#define VPFE_BLK_DC_SUB_MASK 0x03fff
+#define VPFE_BLK_COMP_MASK 0xff
+#define VPFE_BLK_COMP_GB_COMP_SHIFT 8
+#define VPFE_BLK_COMP_GR_COMP_SHIFT 16
+#define VPFE_BLK_COMP_R_COMP_SHIFT 24
+#define VPFE_LATCH_ON_VSYNC_DISABLE (1 << 15)
+#define VPFE_DATA_PACK_ENABLE (1 << 11)
+#define VPFE_HORZ_INFO_SPH_SHIFT 16
+#define VPFE_VERT_START_SLV0_SHIFT 16
+#define VPFE_VDINT_VDINT0_SHIFT 16
+#define VPFE_VDINT_VDINT1_MASK 0xffff
+#define VPFE_PPC_RAW 1
+#define VPFE_DCSUB_DEFAULT_VAL 0
+#define VPFE_CLAMP_DEFAULT_VAL 0
+#define VPFE_COLPTN_VAL 0xbb11bb11
+#define VPFE_TWO_BYTES_PER_PIXEL 2
+#define VPFE_INTERLACED_IMAGE_INVERT 0x4b6d
+#define VPFE_INTERLACED_NO_IMAGE_INVERT 0x0249
+#define VPFE_PROGRESSIVE_IMAGE_INVERT 0x4000
+#define VPFE_PROGRESSIVE_NO_IMAGE_INVERT 0
+#define VPFE_INTERLACED_HEIGHT_SHIFT 1
+#define VPFE_SYN_MODE_INPMOD_SHIFT 12
+#define VPFE_SYN_MODE_INPMOD_MASK 3
+#define VPFE_SYN_MODE_8BITS (7 << 8)
+#define VPFE_SYN_MODE_10BITS (6 << 8)
+#define VPFE_SYN_MODE_11BITS (5 << 8)
+#define VPFE_SYN_MODE_12BITS (4 << 8)
+#define VPFE_SYN_MODE_13BITS (3 << 8)
+#define VPFE_SYN_MODE_14BITS (2 << 8)
+#define VPFE_SYN_MODE_15BITS (1 << 8)
+#define VPFE_SYN_MODE_16BITS (0 << 8)
+#define VPFE_SYN_FLDMODE_MASK 1
+#define VPFE_SYN_FLDMODE_SHIFT 7
+#define VPFE_REC656IF_BT656_EN 3
+#define VPFE_SYN_MODE_VD_POL_NEGATIVE (1 << 2)
+#define VPFE_CCDCFG_Y8POS_SHIFT 11
+#define VPFE_CCDCFG_BW656_10BIT (1 << 5)
+#define VPFE_SDOFST_FIELD_INTERLEAVED 0x249
+#define VPFE_NO_CULLING 0xffff00ff
+#define VPFE_VDINT0 (1 << 0)
+#define VPFE_VDINT1 (1 << 1)
+#define VPFE_VDINT2 (1 << 2)
+#define VPFE_DMA_CNTL_OVERFLOW (1 << 31)
+
+#define VPFE_CONFIG_PCLK_INV_SHIFT 0
+#define VPFE_CONFIG_PCLK_INV_MASK 1
+#define VPFE_CONFIG_PCLK_INV_NOT_INV 0
+#define VPFE_CONFIG_PCLK_INV_INV 1
+#define VPFE_CONFIG_EN_SHIFT 1
+#define VPFE_CONFIG_EN_MASK 2
+#define VPFE_CONFIG_EN_DISABLE 0
+#define VPFE_CONFIG_EN_ENABLE 1
+#define VPFE_CONFIG_ST_SHIFT 2
+#define VPFE_CONFIG_ST_MASK 4
+#define VPFE_CONFIG_ST_OCP_ACTIVE 0
+#define VPFE_CONFIG_ST_OCP_STANDBY 1
+
+#endif /* AM437X_VPFE_REGS_H */
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
index ed39ac8..5ca4d3f 100644
--- a/include/uapi/linux/Kbuild
+++ b/include/uapi/linux/Kbuild
@@ -34,6 +34,7 @@ header-y += adfs_fs.h
header-y += affs_hardblocks.h
header-y += agpgart.h
header-y += aio_abi.h
+header-y += am437x_vpfe.h
header-y += apm_bios.h
header-y += arcfb.h
header-y += atalk.h
diff --git a/include/uapi/linux/am437x_vpfe.h b/include/uapi/linux/am437x_vpfe.h
new file mode 100644
index 0000000..9b03033f
--- /dev/null
+++ b/include/uapi/linux/am437x_vpfe.h
@@ -0,0 +1,122 @@
+/*
+ * Copyright (C) 2013 - 2014 Texas Instruments, Inc.
+ *
+ * Benoit Parrot <bparrot-l0cyMroinI0@public.gmane.org>
+ * Lad, Prabhakar <prabhakar.csengg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef AM437X_VPFE_USER_H
+#define AM437X_VPFE_USER_H
+
+enum vpfe_ccdc_data_size {
+ VPFE_CCDC_DATA_16BITS = 0,
+ VPFE_CCDC_DATA_15BITS,
+ VPFE_CCDC_DATA_14BITS,
+ VPFE_CCDC_DATA_13BITS,
+ VPFE_CCDC_DATA_12BITS,
+ VPFE_CCDC_DATA_11BITS,
+ VPFE_CCDC_DATA_10BITS,
+ VPFE_CCDC_DATA_8BITS,
+};
+
+/* enum for No of pixel per line to be avg. in Black Clamping*/
+enum vpfe_ccdc_sample_length {
+ VPFE_CCDC_SAMPLE_1PIXELS = 0,
+ VPFE_CCDC_SAMPLE_2PIXELS,
+ VPFE_CCDC_SAMPLE_4PIXELS,
+ VPFE_CCDC_SAMPLE_8PIXELS,
+ VPFE_CCDC_SAMPLE_16PIXELS,
+};
+
+/* enum for No of lines in Black Clamping */
+enum vpfe_ccdc_sample_line {
+ VPFE_CCDC_SAMPLE_1LINES = 0,
+ VPFE_CCDC_SAMPLE_2LINES,
+ VPFE_CCDC_SAMPLE_4LINES,
+ VPFE_CCDC_SAMPLE_8LINES,
+ VPFE_CCDC_SAMPLE_16LINES,
+};
+
+/* enum for Alaw gamma width */
+enum vpfe_ccdc_gamma_width {
+ VPFE_CCDC_GAMMA_BITS_15_6 = 0, /* use bits 15-6 for gamma */
+ VPFE_CCDC_GAMMA_BITS_14_5,
+ VPFE_CCDC_GAMMA_BITS_13_4,
+ VPFE_CCDC_GAMMA_BITS_12_3,
+ VPFE_CCDC_GAMMA_BITS_11_2,
+ VPFE_CCDC_GAMMA_BITS_10_1,
+ VPFE_CCDC_GAMMA_BITS_09_0, /* use bits 9-0 for gamma */
+};
+
+/* structure for ALaw */
+struct vpfe_ccdc_a_law {
+ /* Enable/disable A-Law */
+ unsigned char enable;
+ /* Gamma Width Input */
+ enum vpfe_ccdc_gamma_width gamma_wd;
+};
+
+/* structure for Black Clamping */
+struct vpfe_ccdc_black_clamp {
+ unsigned char enable;
+ /* only if bClampEnable is TRUE */
+ enum vpfe_ccdc_sample_length sample_pixel;
+ /* only if bClampEnable is TRUE */
+ enum vpfe_ccdc_sample_line sample_ln;
+ /* only if bClampEnable is TRUE */
+ unsigned short start_pixel;
+ /* only if bClampEnable is TRUE */
+ unsigned short sgain;
+ /* only if bClampEnable is FALSE */
+ unsigned short dc_sub;
+};
+
+/* structure for Black Level Compensation */
+struct vpfe_ccdc_black_compensation {
+ /* Constant value to subtract from Red component */
+ char r;
+ /* Constant value to subtract from Gr component */
+ char gr;
+ /* Constant value to subtract from Blue component */
+ char b;
+ /* Constant value to subtract from Gb component */
+ char gb;
+};
+
+/* Structure for CCDC configuration parameters for raw capture mode passed
+ * by application
+ */
+struct vpfe_ccdc_config_params_raw {
+ /* data size value from 8 to 16 bits */
+ enum vpfe_ccdc_data_size data_sz;
+ /* Structure for Optional A-Law */
+ struct vpfe_ccdc_a_law alaw;
+ /* Structure for Optical Black Clamp */
+ struct vpfe_ccdc_black_clamp blk_clamp;
+ /* Structure for Black Compensation */
+ struct vpfe_ccdc_black_compensation blk_comp;
+};
+
+/*
+ * Private IOCTL
+ * VIDIOC_AM437X_CCDC_CFG - Set CCDC configuration for raw capture
+ * This is an experimental ioctl that will change in future kernels. So use
+ * this ioctl with care !
+ **/
+#define VIDIOC_AM437X_CCDC_CFG \
+ _IOW('V', BASE_VIDIOC_PRIVATE + 1, void *)
+
+#endif /* AM437X_VPFE_USER_H */
--
1.9.1
^ permalink raw reply related
* Re: [PATCH 0/6] kernel tinification: optionally compile out splice family of syscalls (splice, vmsplice, tee and sendfile)
From: Geert Uytterhoeven @ 2014-11-24 8:38 UTC (permalink / raw)
To: Josh Triplett
Cc: Pieter Smith, David Miller,
alexander.h.duyck-ral2JQCrhuEAvxtiuMwx3w, Al Viro,
Alexei Starovoitov, Andrew Morton, beber-2YnHqweIUXrk1uMJSBkQmQ,
catalina.mocanu-Re5JQEeQqe8AvxtiuMwx3w, Daniel Borkmann,
Eric Dumazet, Eric W. Biederman, Fabian Frederick,
fuse-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f, Hugh Dickins,
iulia.manda21-Re5JQEeQqe8AvxtiuMwx3w, Jan Beulich,
bfields-uC3wQj2KruNg9hUCZPvPmw, jlayton-vpEMnDpepFuMZCB2o+C8xQ,
linux-api-u79uwXL29TY76Z2rM5mHXA, Linux FS Devel,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Luis R. Rodriguez, Matt Turner, Mel Gorman, Michael S. Tsirkin,
Miklos
In-Reply-To: <20141123233637.GC12456@thin>
On Mon, Nov 24, 2014 at 12:36 AM, Josh Triplett <josh-iaAMLnmF4UmaiuxdJuQwMA@public.gmane.org> wrote:
> On Sun, Nov 23, 2014 at 09:30:40PM +0100, Pieter Smith wrote:
>> On Sun, Nov 23, 2014 at 11:43:26AM -0800, Josh Triplett wrote:
>> > On Sun, Nov 23, 2014 at 01:46:23PM -0500, David Miller wrote:
>> > > Truly removing sendfile/sendpage means that you can't even compile NFS
>> > > into the tree.
>> >
>> > If you mean the in-kernel nfsd (CONFIG_NFSD), that already has a large
>> > stack of "select" and "depends on", both directly and indirectly; adding
>> > a "select SPLICE_SYSCALL" to it seems fine. (That select does need
>> > adding, though. Pieter, you need to test-compile more than just
>> > tinyconfig and defconfig. Try an allyesconfig with *just* splice turned
>> > off, and make sure that compiles.)
>>
>> Did exacly that. Took forever on my hardware, but no problems.
>
> Ah, I see. Looking more closely at nfsd, it looks like it already has a
> code path for filesystems that don't do splice. I think, rather than
> making nfsd select SPLICE_SYSCALL, that it would suffice to change the
> "rqstp->rq_splice_ok = true;" in svc_process_common (net/sunrpc/svc.c)
> to:
>
> rqstp->rq_splice_ok = IS_ENABLED(CONFIG_SPLICE_SYSCALL);
>
> Then nfsd should simply *always* fall back to its non-splice support.
Hence I suggest adding to the nfsd help text:
While nfsd works without SPLICE_SYSCALL, you may want to enable
SPLICE_SYSCALL for <...> (performance?) reasons.
(Hmm, does Kconfig need a "suggests", cfr. Debian package dependencies?)
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply
* Re: [PATCH 0/6] kernel tinification: optionally compile out splice family of syscalls (splice, vmsplice, tee and sendfile)
From: Josh Triplett @ 2014-11-24 9:00 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Pieter Smith, David Miller,
alexander.h.duyck-ral2JQCrhuEAvxtiuMwx3w, Al Viro,
Alexei Starovoitov, Andrew Morton, beber-2YnHqweIUXrk1uMJSBkQmQ,
catalina.mocanu-Re5JQEeQqe8AvxtiuMwx3w, Daniel Borkmann,
Eric Dumazet, Eric W. Biederman, Fabian Frederick,
fuse-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f, Hugh Dickins,
iulia.manda21-Re5JQEeQqe8AvxtiuMwx3w, Jan Beulich,
bfields-uC3wQj2KruNg9hUCZPvPmw, jlayton-vpEMnDpepFuMZCB2o+C8xQ,
linux-api-u79uwXL29TY76Z2rM5mHXA, Linux FS Devel,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Luis R. Rodriguez, Matt Turner, Mel Gorman, Michael S. Tsirkin,
Miklos
In-Reply-To: <CAMuHMdW8gAiyFiPHu-N4Dg_+b6Qg9JXZZ3PqOn=VmZLcEH-Xkg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
On Mon, Nov 24, 2014 at 09:38:20AM +0100, Geert Uytterhoeven wrote:
> On Mon, Nov 24, 2014 at 12:36 AM, Josh Triplett <josh-iaAMLnmF4UmaiuxdJuQwMA@public.gmane.org> wrote:
> > On Sun, Nov 23, 2014 at 09:30:40PM +0100, Pieter Smith wrote:
> >> On Sun, Nov 23, 2014 at 11:43:26AM -0800, Josh Triplett wrote:
> >> > On Sun, Nov 23, 2014 at 01:46:23PM -0500, David Miller wrote:
> >> > > Truly removing sendfile/sendpage means that you can't even compile NFS
> >> > > into the tree.
> >> >
> >> > If you mean the in-kernel nfsd (CONFIG_NFSD), that already has a large
> >> > stack of "select" and "depends on", both directly and indirectly; adding
> >> > a "select SPLICE_SYSCALL" to it seems fine. (That select does need
> >> > adding, though. Pieter, you need to test-compile more than just
> >> > tinyconfig and defconfig. Try an allyesconfig with *just* splice turned
> >> > off, and make sure that compiles.)
> >>
> >> Did exacly that. Took forever on my hardware, but no problems.
> >
> > Ah, I see. Looking more closely at nfsd, it looks like it already has a
> > code path for filesystems that don't do splice. I think, rather than
> > making nfsd select SPLICE_SYSCALL, that it would suffice to change the
> > "rqstp->rq_splice_ok = true;" in svc_process_common (net/sunrpc/svc.c)
> > to:
> >
> > rqstp->rq_splice_ok = IS_ENABLED(CONFIG_SPLICE_SYSCALL);
> >
> > Then nfsd should simply *always* fall back to its non-splice support.
>
> Hence I suggest adding to the nfsd help text:
>
> While nfsd works without SPLICE_SYSCALL, you may want to enable
> SPLICE_SYSCALL for <...> (performance?) reasons.
It already seems sufficiently unlikely to enable NFSD while disabling
SPLICE_SYSCALL (in the latter case, turning on EXPERT to do so). It
doesn't seem worth adding such a note to NFSD. At most, I'd say that
NFSD might want a note somewhere in its documentation saying that it
takes advantage of filesystems with splice support if serving files from
one, and if running on a kernel that has splice.
> (Hmm, does Kconfig need a "suggests", cfr. Debian package dependencies?)
Perhaps, though that seems much lower priority than, for instance,
transitive "select".
- Josh Triplett
^ permalink raw reply
* Re: [fuse-devel] [PATCH 4/6] fs/fuse: support compiling out splice
From: Pieter Smith @ 2014-11-24 9:49 UTC (permalink / raw)
To: Josh Triplett
Cc: Richard Weinberger, Michael S. Tsirkin, Bertrand Jacquin,
Oleg Nesterov, J. Bruce Fields, Eric Dumazet,
蔡正龙, Jeff Layton, Tom Herbert,
Alexei Starovoitov, Miklos Szeredi, Peter Foley, Hugh Dickins,
Xiao Guangrong, Geert Uytterhoeven, Mel Gorman, Matt Turner,
Paul E. McKenney, Alexander Duyck, open list:FUSE: FILESYSTEM...,
Luis R. Rodriguez
In-Reply-To: <20141123232302.GA12456@thin>
On Sun, Nov 23, 2014 at 03:23:02PM -0800, Josh Triplett wrote:
> On Sun, Nov 23, 2014 at 11:29:08PM +0100, Richard Weinberger wrote:
> > On Sun, Nov 23, 2014 at 3:20 PM, Pieter Smith <pieter@boesman.nl> wrote:
> > > To implement splice support, fs/fuse makes use of nosteal_pipe_buf_ops. This
> > > struct is exported by fs/splice. The goal of the larger patch set is to
> > > completely compile out fs/splice, so uses of the exported struct need to be
> > > compiled out along with fs/splice.
> > >
> > > This patch therefore compiles out splice support in fs/fuse when
> > > CONFIG_SYSCALL_SPLICE is undefined.
> > >
> > > Signed-off-by: Pieter Smith <pieter@boesman.nl>
> > > ---
> > > fs/fuse/dev.c | 4 ++--
> > > include/linux/fs.h | 6 ++++++
> > > 2 files changed, 8 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
> > > index ca88731..f8f92a4 100644
> > > --- a/fs/fuse/dev.c
> > > +++ b/fs/fuse/dev.c
> > > @@ -1291,7 +1291,7 @@ static ssize_t fuse_dev_read(struct kiocb *iocb, const struct iovec *iov,
> > > return fuse_dev_do_read(fc, file, &cs, iov_length(iov, nr_segs));
> > > }
> > >
> > > -static ssize_t fuse_dev_splice_read(struct file *in, loff_t *ppos,
> > > +static ssize_t __maybe_unused fuse_dev_splice_read(struct file *in, loff_t *ppos,
> > > struct pipe_inode_info *pipe,
> > > size_t len, unsigned int flags)
> > > {
> > > @@ -2144,7 +2144,7 @@ const struct file_operations fuse_dev_operations = {
> > > .llseek = no_llseek,
> > > .read = do_sync_read,
> > > .aio_read = fuse_dev_read,
> > > - .splice_read = fuse_dev_splice_read,
> > > + .splice_read = __splice_p(fuse_dev_splice_read),
> > > .write = do_sync_write,
> > > .aio_write = fuse_dev_write,
> > > .splice_write = fuse_dev_splice_write,
> > > diff --git a/include/linux/fs.h b/include/linux/fs.h
> > > index a957d43..04c0975 100644
> > > --- a/include/linux/fs.h
> > > +++ b/include/linux/fs.h
> > > @@ -2443,6 +2443,12 @@ extern int blkdev_fsync(struct file *filp, loff_t start, loff_t end,
> > > int datasync);
> > > extern void block_sync_page(struct page *page);
> > >
> > > +#ifdef CONFIG_SYSCALL_SPLICE
> > > +#define __splice_p(x) x
> > > +#else
> > > +#define __splice_p(x) NULL
> > > +#endif
> > > +
> >
> > This needs to go into a different patch.
> > One logical change per patch please. :-)
>
> Easy enough to merge this one into the patch introducing
> CONFIG_SYSCALL_SPLICE, then.
>
> - Josh Triplett
The patch introducing CONFIG_SYSCALL_SPLICE (PATCH 3) only compiles out the
syscalls. PATCH 6 on the other hand, compiles out fs/splice.c. This patch
allows fs/fuse to be compiled when fs/splice.c is compiled out. If I am to
squash it, it would be logical to include it in PATCH 6, not 3.
Is this agreeable?
PATCH 5 does the same as this one for net/core. Should I still keep PATCH 5
separate from a maintainership perspective?
- Pieter Smith
^ permalink raw reply
* Re: [PATCH v6 0/7] vfs: Non-blockling buffered fs read (page cache only)
From: Christoph Hellwig @ 2014-11-24 9:53 UTC (permalink / raw)
To: Milosz Tanski
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA, Andrew Morton,
linux-fsdevel-u79uwXL29TY76Z2rM5mHXA,
linux-aio-Bw31MaZKKs3YtjvyW6yDsg, Mel Gorman, Volker Lendecke,
Tejun Heo, Jeff Moyer, Theodore Ts'o, Al Viro,
linux-api-u79uwXL29TY76Z2rM5mHXA, Michael Kerrisk,
linux-arch-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <cover.1415636409.git.milosz-B5zB6C1i6pkAvxtiuMwx3w@public.gmane.org>
Al or Andrew,
can someone pick this up? The end of the 3.19 merge window is near,
and I'd really love to get this series in.
^ permalink raw reply
* Re: [PATCH 0/6] kernel tinification: optionally compile out splice family of syscalls (splice, vmsplice, tee and sendfile)
From: Pieter Smith @ 2014-11-24 10:01 UTC (permalink / raw)
To: Josh Triplett
Cc: Jeff Layton, David Miller,
alexander.h.duyck-ral2JQCrhuEAvxtiuMwx3w,
viro-RmSDqhL/yNMiFSDQTTA3OLVCufUGDwFn, ast-uqk4Ao+rVK5Wk0Htik3J/w,
akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b,
beber-2YnHqweIUXrk1uMJSBkQmQ,
catalina.mocanu-Re5JQEeQqe8AvxtiuMwx3w,
dborkman-H+wXaHxf7aLQT0dZR+AlfA, edumazet-hpIqsD4AKlfQT0dZR+AlfA,
ebiederm-aS9lmoZGLiVWk0Htik3J/w, fabf-AgBVmzD5pcezQB+pC5nmwQ,
fuse-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f,
geert-Td1EMuHUCqxL1ZNQvxDV9g, hughd-hpIqsD4AKlfQT0dZR+AlfA,
iulia.manda21-Re5JQEeQqe8AvxtiuMwx3w, JBeulich-IBi9RG/b67k,
bfields-uC3wQj2KruNg9hUCZPvPmw, linux-api-u79uwXL29TY76Z2rM5mHXA,
linux-fsdevel-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, mcgrof-IBi9RG/b67k,
mattst88-Re5JQEeQqe8AvxtiuMwx3w, mgorman-l3A5Bk7waGM,
mst-H+wXaHxf7aLQT0dZR+AlfA, miklos-sUDqSbJrdHQHWmgEVkV9KA,
netdev-u79uwXL29TY76Z2rM5mHXA, oleg-H+wXaHxf7aLQT0dZR+AlfA,
Paul.Durrant-Sxgqhf6Nn4DQT0dZR+AlfA,
paulmck-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8,
pefoley2-lY0TAiDIAFlBDgjK7y7TUQ, tgraf-G/eBtMaohhA,
therbert-hpIqsD4AKlfQT0dZR+AlfA, willemb-hpIqsD4AKlfQT0dZR+AlfA,
xiaoguangrong-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8,
zhenglong.cai-TJRtMXcVgQTM1kAEIRd3EQ
In-Reply-To: <20141124003251.GA13590@thin>
On Sun, Nov 23, 2014 at 04:32:51PM -0800, Josh Triplett wrote:
> On Sun, Nov 23, 2014 at 07:28:10PM -0500, Jeff Layton wrote:
> > On Sun, 23 Nov 2014 15:36:37 -0800
> > Josh Triplett <josh-iaAMLnmF4UmaiuxdJuQwMA@public.gmane.org> wrote:
> >
> > > On Sun, Nov 23, 2014 at 09:30:40PM +0100, Pieter Smith wrote:
> > > > On Sun, Nov 23, 2014 at 11:43:26AM -0800, Josh Triplett wrote:
> > > > > On Sun, Nov 23, 2014 at 01:46:23PM -0500, David Miller wrote:
> > > > > > Truly removing sendfile/sendpage means that you can't even compile NFS
> > > > > > into the tree.
> > > > >
> > > > > If you mean the in-kernel nfsd (CONFIG_NFSD), that already has a large
> > > > > stack of "select" and "depends on", both directly and indirectly; adding
> > > > > a "select SPLICE_SYSCALL" to it seems fine. (That select does need
> > > > > adding, though. Pieter, you need to test-compile more than just
> > > > > tinyconfig and defconfig. Try an allyesconfig with *just* splice turned
> > > > > off, and make sure that compiles.)
> > > >
> > > > Did exacly that. Took forever on my hardware, but no problems.
> > >
> > > Ah, I see. Looking more closely at nfsd, it looks like it already has a
> > > code path for filesystems that don't do splice. I think, rather than
> > > making nfsd select SPLICE_SYSCALL, that it would suffice to change the
> > > "rqstp->rq_splice_ok = true;" in svc_process_common (net/sunrpc/svc.c)
> > > to:
> > >
> > > rqstp->rq_splice_ok = IS_ENABLED(CONFIG_SPLICE_SYSCALL);
> > >
> > > Then nfsd should simply *always* fall back to its non-splice support.
> > >
> >
> > I'd probably prefer the above, actually. We have to keep supporting
> > non-splice enabled fs' for the forseeable future, so we may as well
> > allow people to run nfsd in such configurations. It could even be
> > useful for testing the non-splice-enabled codepaths.
>
> Good point!
>
> - Josh Triplett
I'll add this to svc_process_common. I can squash this into PATCH 3, which is
where the syscalls can be compiled out. The log entry may however get a little
crowded and multi-functional.
Should I keep this as a separate patch?
^ permalink raw reply
* [PATCH v3 03/41] virtio: add virtio 1.0 feature bit
From: Michael S. Tsirkin @ 2014-11-24 11:52 UTC (permalink / raw)
To: linux-kernel; +Cc: rusty, linux-api, virtualization, pbonzini, David Miller
In-Reply-To: <1416829787-14252-1-git-send-email-mst@redhat.com>
Based on original patches by Rusty Russell, Thomas Huth
and Cornelia Huck.
Note: at this time, we do not negotiate this feature bit
in core, drivers have to declare VERSION_1 support explicitly.
After all drivers are converted, we will be able to
move VERSION_1 to core and drop it from all drivers.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
---
include/uapi/linux/virtio_config.h | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/include/uapi/linux/virtio_config.h b/include/uapi/linux/virtio_config.h
index 3ce768c..f3fe33a 100644
--- a/include/uapi/linux/virtio_config.h
+++ b/include/uapi/linux/virtio_config.h
@@ -41,11 +41,11 @@
/* We've given up on this device. */
#define VIRTIO_CONFIG_S_FAILED 0x80
-/* Some virtio feature bits (currently bits 28 through 31) are reserved for the
+/* Some virtio feature bits (currently bits 28 through 32) are reserved for the
* transport being used (eg. virtio_ring), the rest are per-device feature
* bits. */
#define VIRTIO_TRANSPORT_F_START 28
-#define VIRTIO_TRANSPORT_F_END 32
+#define VIRTIO_TRANSPORT_F_END 33
/* Do we get callbacks when the ring is completely used, even if we've
* suppressed them? */
@@ -54,4 +54,7 @@
/* Can the device handle any descriptor layout? */
#define VIRTIO_F_ANY_LAYOUT 27
+/* v1.0 compliant. */
+#define VIRTIO_F_VERSION_1 32
+
#endif /* _UAPI_LINUX_VIRTIO_CONFIG_H */
--
MST
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox