* Re: [PATCH v5 03/15] dt-bindings: Document the ARM System timer bindings
From: Rob Herring @ 2015-04-03 17:09 UTC (permalink / raw)
To: Maxime Coquelin
Cc: Uwe Kleine-König, Andreas Färber, Geert Uytterhoeven,
Rob Herring, Philipp Zabel, Linus Walleij, Arnd Bergmann,
Stefan Agner, Peter Meerwald, Paul Bolle, Peter Hurley,
Andy Shevchenko, Chanwoo Choi, Russell King, Daniel Lezcano,
Jonathan Corbet, Pawel Moll, Mark Rutland, Ian Campbell,
Kumar Gala, Thomas Gleixner, Greg Kroah-Hartman
In-Reply-To: <1428080481-18591-4-git-send-email-mcoquelin.stm32@gmail.com>
On Fri, Apr 3, 2015 at 12:01 PM, Maxime Coquelin
<mcoquelin.stm32@gmail.com> wrote:
> This adds documentation of device tree bindings for the
> ARM System timer.
>
> Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
> Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
> ---
> .../devicetree/bindings/arm/armv7m_systick.txt | 26 ++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/armv7m_systick.txt
>
> diff --git a/Documentation/devicetree/bindings/arm/armv7m_systick.txt b/Documentation/devicetree/bindings/arm/armv7m_systick.txt
> new file mode 100644
> index 0000000..7cf4a24
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/armv7m_systick.txt
> @@ -0,0 +1,26 @@
> +* ARMv7M System Timer
> +
> +ARMv7-M includes a system timer, known as SysTick. Current driver only
> +implements the clocksource feature.
> +
> +Required properties:
> +- compatible : Should be "arm,armv7m-systick"
> +- reg : The address range of the timer
> +
> +Required clocking property, have to be one of:
> +- clocks : The input clock of the timer
> +- clock-frequency : The rate in HZ in input of the ARM SysTick
> +
> +Examples:
> +
> +systick: timer@e000e010 {
> + compatible = "arm,armv7m-systick";
> + reg = <0xe000e010 0x10>;
> + clocks = <&clk_systick>;
> +};
> +
> +systick: timer@e000e010 {
> + compatible = "arm,armv7m-systick";
> + reg = <0xe000e010 0x10>;
> + clock-frequency = <90000000>;
> +};
> --
> 1.9.1
>
^ permalink raw reply
* [PATCH v5 15/15] MAINTAINERS: Add entry for STM32 MCUs
From: Maxime Coquelin @ 2015-04-03 17:01 UTC (permalink / raw)
To: u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ, afaerber-l3A5Bk7waGM,
geert-Td1EMuHUCqxL1ZNQvxDV9g, Rob Herring, Philipp Zabel,
Linus Walleij, Arnd Bergmann, stefan-XLVq0VzYD2Y,
pmeerw-jW+XmwGofnusTnJN9+BGXg, pebolle-IWqWACnzNjzz+pZb47iToQ,
peter-WaGBZJeGNqdsbIuE7sb01tBPR1lH4CV8,
andy.shevchenko-Re5JQEeQqe8AvxtiuMwx3w,
cw00.choi-Sze3O3UU22JBDgjK7y7TUQ, Russell King, Daniel Lezcano
Cc: Jonathan Corbet, Pawel Moll, Mark Rutland, Ian Campbell,
Kumar Gala, Thomas Gleixner, Greg Kroah-Hartman, Jiri Slaby,
Andrew Morton, David S. Miller, Mauro Carvalho Chehab,
Joe Perches, Antti Palosaari, Tejun Heo, Will Deacon,
Nikolay Borisov, Rusty Russell, Kees Cook, Michal Marek,
linux-doc-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-gpio-u79uwXL29TY76Z2rM5mHXA, linux-serial-fy+rA21nqHI
In-Reply-To: <1428080481-18591-1-git-send-email-mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Add a MAINTAINER entry covering all STM32 machine and drivers files.
Signed-off-by: Maxime Coquelin <mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
MAINTAINERS | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index ddc5a8c..08c08c4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1467,6 +1467,14 @@ F: drivers/usb/host/ehci-st.c
F: drivers/usb/host/ohci-st.c
F: drivers/ata/ahci_st.c
+ARM/STM32 ARCHITECTURE
+M: Maxime Coquelin <mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+L: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org (moderated for non-subscribers)
+S: Maintained
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/stm32.git
+N: stm32
+F: drivers/clocksource/armv7m_systick.c
+
ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
M: Lennert Buytenhek <kernel-OLH4Qvv75CYX/NnBR394Jw@public.gmane.org>
L: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org (moderated for non-subscribers)
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v5 14/15] ARM: configs: Add STM32 defconfig
From: Maxime Coquelin @ 2015-04-03 17:01 UTC (permalink / raw)
To: u.kleine-koenig, afaerber, geert, Rob Herring, Philipp Zabel,
Linus Walleij, Arnd Bergmann, stefan, pmeerw, pebolle, peter,
andy.shevchenko, cw00.choi, Russell King, Daniel Lezcano
Cc: Jonathan Corbet, Pawel Moll, Mark Rutland, Ian Campbell,
Kumar Gala, Thomas Gleixner, Greg Kroah-Hartman, Jiri Slaby,
Andrew Morton, David S. Miller, Mauro Carvalho Chehab,
Joe Perches, Antti Palosaari, Tejun Heo, Will Deacon,
Nikolay Borisov, Rusty Russell, Kees Cook, Michal Marek,
linux-doc, linux-arm-kernel, linux-kernel, devicetree, linux-gpio,
linux-serial
In-Reply-To: <1428080481-18591-1-git-send-email-mcoquelin.stm32@gmail.com>
This patch adds a new config for STM32 MCUs.
STM32F429 Discovery board boots successfully with this config applied.
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
---
arch/arm/configs/stm32_defconfig | 71 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 71 insertions(+)
create mode 100644 arch/arm/configs/stm32_defconfig
diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig
new file mode 100644
index 0000000..412a9f9
--- /dev/null
+++ b/arch/arm/configs/stm32_defconfig
@@ -0,0 +1,71 @@
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="./rootfs.cpio"
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_UID16 is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_MMU is not set
+CONFIG_ARCH_STM32=y
+CONFIG_SET_MEM_PARAM=y
+CONFIG_DRAM_BASE=0x90000000
+CONFIG_FLASH_MEM_BASE=0x08000000
+CONFIG_FLASH_SIZE=0x00200000
+CONFIG_PREEMPT=y
+# CONFIG_ATAGS is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_XIP_KERNEL=y
+CONFIG_XIP_PHYS_ADDR=0x08008000
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_COREDUMP is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_BLK_DEV is not set
+CONFIG_EEPROM_93CX6=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_STM32=y
+CONFIG_SERIAL_STM32_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_USB=y
+CONFIG_USB_DWC2=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FTRACE is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC7=y
--
1.9.1
^ permalink raw reply related
* [PATCH v5 13/15] ARM: dts: Introduce STM32F429 MCU
From: Maxime Coquelin @ 2015-04-03 17:01 UTC (permalink / raw)
To: u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ, afaerber-l3A5Bk7waGM,
geert-Td1EMuHUCqxL1ZNQvxDV9g, Rob Herring, Philipp Zabel,
Linus Walleij, Arnd Bergmann, stefan-XLVq0VzYD2Y,
pmeerw-jW+XmwGofnusTnJN9+BGXg, pebolle-IWqWACnzNjzz+pZb47iToQ,
peter-WaGBZJeGNqdsbIuE7sb01tBPR1lH4CV8,
andy.shevchenko-Re5JQEeQqe8AvxtiuMwx3w,
cw00.choi-Sze3O3UU22JBDgjK7y7TUQ, Russell King, Daniel Lezcano
Cc: Jonathan Corbet, Pawel Moll, Mark Rutland, Ian Campbell,
Kumar Gala, Thomas Gleixner, Greg Kroah-Hartman, Jiri Slaby,
Andrew Morton, David S. Miller, Mauro Carvalho Chehab,
Joe Perches, Antti Palosaari, Tejun Heo, Will Deacon,
Nikolay Borisov, Rusty Russell, Kees Cook, Michal Marek,
linux-doc-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-gpio-u79uwXL29TY76Z2rM5mHXA, linux-serial-fy+rA21nqHI
In-Reply-To: <1428080481-18591-1-git-send-email-mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
The STMicrolectornics's STM32F419 MCU has the following main features:
- Cortex-M4 core running up to @180MHz
- 2MB internal flash, 256KBytes internal RAM
- FMC controller to connect SDRAM, NOR and NAND memories
- SD/MMC/SDIO support
- Ethernet controller
- USB OTFG FS & HS controllers
- I2C, SPI, CAN busses support
- Several 16 & 32 bits general purpose timers
- Serial Audio interface
- LCD controller
Tested-by: Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/stm32f429-disco.dts | 71 +++++++++++
arch/arm/boot/dts/stm32f429.dtsi | 226 ++++++++++++++++++++++++++++++++++
3 files changed, 298 insertions(+)
create mode 100644 arch/arm/boot/dts/stm32f429-disco.dts
create mode 100644 arch/arm/boot/dts/stm32f429.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a1c776b..e5dbd03 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -509,6 +509,7 @@ dtb-$(CONFIG_ARCH_STI) += \
stih416-b2020.dtb \
stih416-b2020e.dtb \
stih418-b2199.dtb
+dtb-$(CONFIG_ARCH_STM32)+= stm32f429-disco.dtb
dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-a1000.dtb \
sun4i-a10-ba10-tvbox.dtb \
diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
new file mode 100644
index 0000000..6b9aa59
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f429-disco.dts
@@ -0,0 +1,71 @@
+/*
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32f429.dtsi"
+
+/ {
+ model = "STMicroelectronics STM32F429i-DISCO board";
+ compatible = "st,stm32f429i-disco", "st,stm32f429";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 root=/dev/ram rdinit=/linuxrc";
+ linux,stdout-path = &usart1;
+ };
+
+ memory {
+ reg = <0x90000000 0x800000>;
+ };
+
+ aliases {
+ serial0 = &usart1;
+ };
+};
+
+&usart1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
new file mode 100644
index 0000000..39ffdb8
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -0,0 +1,226 @@
+/*
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "armv7-m.dtsi"
+
+/ {
+ clocks {
+ clk_sysclk: clk-sysclk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <180000000>;
+ };
+
+ clk_hclk: clk-hclk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <180000000>;
+ };
+
+ clk_pclk1: clk-pclk1 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <45000000>;
+ };
+
+ clk_pclk2: clk-pclk2 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <90000000>;
+ };
+
+ clk_pmtr1: clk-pmtr1 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <90000000>;
+ };
+
+ clk_pmtr2: clk-pmtr2 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <180000000>;
+ };
+
+ clk_systick: clk-systick {
+ compatible = "fixed-factor-clock";
+ clocks = <&clk_hclk>;
+ #clock-cells = <0>;
+ clock-div = <8>;
+ clock-mult = <1>;
+ };
+ };
+
+ soc {
+ timer2: timer@40000000 {
+ compatible = "st,stm32-timer";
+ reg = <0x40000000 0x400>;
+ interrupts = <28>;
+ resets = <&rcc 256>;
+ clocks = <&clk_pmtr1>;
+ status = "disabled";
+ };
+
+ timer3: timer@40000400 {
+ compatible = "st,stm32-timer";
+ reg = <0x40000400 0x400>;
+ interrupts = <29>;
+ resets = <&rcc 257>;
+ clocks = <&clk_pmtr1>;
+ status = "disabled";
+ };
+
+ timer4: timer@40000800 {
+ compatible = "st,stm32-timer";
+ reg = <0x40000800 0x400>;
+ interrupts = <30>;
+ resets = <&rcc 258>;
+ clocks = <&clk_pmtr1>;
+ status = "disabled";
+ };
+
+ timer5: timer@40000c00 {
+ compatible = "st,stm32-timer";
+ reg = <0x40000c00 0x400>;
+ interrupts = <50>;
+ resets = <&rcc 259>;
+ clocks = <&clk_pmtr1>;
+ };
+
+ timer6: timer@40001000 {
+ compatible = "st,stm32-timer";
+ reg = <0x40001000 0x400>;
+ interrupts = <54>;
+ resets = <&rcc 260>;
+ clocks = <&clk_pmtr1>;
+ status = "disabled";
+ };
+
+ timer7: timer@40001400 {
+ compatible = "st,stm32-timer";
+ reg = <0x40001400 0x400>;
+ interrupts = <55>;
+ resets = <&rcc 261>;
+ clocks = <&clk_pmtr1>;
+ status = "disabled";
+ };
+
+ usart2: serial@40004400 {
+ compatible = "st,stm32-usart", "st,stm32-uart";
+ reg = <0x40004400 0x400>;
+ interrupts = <38>;
+ clocks = <&clk_pclk1>;
+ status = "disabled";
+ };
+
+ usart3: serial@40004800 {
+ compatible = "st,stm32-usart", "st,stm32-uart";
+ reg = <0x40004800 0x400>;
+ interrupts = <39>;
+ clocks = <&clk_pclk1>;
+ status = "disabled";
+ };
+
+ usart4: serial@40004c00 {
+ compatible = "st,stm32-uart";
+ reg = <0x40004c00 0x400>;
+ interrupts = <52>;
+ clocks = <&clk_pclk1>;
+ status = "disabled";
+ };
+
+ usart5: serial@40005000 {
+ compatible = "st,stm32-uart";
+ reg = <0x40005000 0x400>;
+ interrupts = <53>;
+ clocks = <&clk_pclk1>;
+ status = "disabled";
+ };
+
+ usart7: serial@40007800 {
+ compatible = "st,stm32-usart", "st,stm32-uart";
+ reg = <0x40007800 0x400>;
+ interrupts = <82>;
+ clocks = <&clk_pclk1>;
+ status = "disabled";
+ };
+
+ usart8: serial@40007c00 {
+ compatible = "st,stm32-usart", "st,stm32-uart";
+ reg = <0x40007c00 0x400>;
+ interrupts = <83>;
+ clocks = <&clk_pclk1>;
+ status = "disabled";
+ };
+
+ usart1: serial@40011000 {
+ compatible = "st,stm32-usart", "st,stm32-uart";
+ reg = <0x40011000 0x400>;
+ interrupts = <37>;
+ clocks = <&clk_pclk2>;
+ status = "disabled";
+ };
+
+ usart6: serial@40011400 {
+ compatible = "st,stm32-usart", "st,stm32-uart";
+ reg = <0x40011400 0x400>;
+ interrupts = <71>;
+ clocks = <&clk_pclk2>;
+ status = "disabled";
+ };
+
+ rcc: rcc@40023810 {
+ #reset-cells = <1>;
+ compatible = "st,stm32-rcc";
+ reg = <0x40023800 0x400>;
+ };
+ };
+};
+
+&systick {
+ clocks = <&clk_systick>;
+ status = "okay";
+};
--
1.9.1
^ permalink raw reply related
* [PATCH v5 12/15] ARM: dts: Add ARM System timer as clockevent in armv7m
From: Maxime Coquelin @ 2015-04-03 17:01 UTC (permalink / raw)
To: u.kleine-koenig, afaerber, geert, Rob Herring, Philipp Zabel,
Linus Walleij, Arnd Bergmann, stefan, pmeerw, pebolle, peter,
andy.shevchenko, cw00.choi, Russell King, Daniel Lezcano
Cc: Jonathan Corbet, Pawel Moll, Mark Rutland, Ian Campbell,
Kumar Gala, Thomas Gleixner, Greg Kroah-Hartman, Jiri Slaby,
Andrew Morton, David S. Miller, Mauro Carvalho Chehab,
Joe Perches, Antti Palosaari, Tejun Heo, Will Deacon,
Nikolay Borisov, Rusty Russell, Kees Cook, Michal Marek,
linux-doc, linux-arm-kernel, linux-kernel, devicetree, linux-gpio,
linux-serial
In-Reply-To: <1428080481-18591-1-git-send-email-mcoquelin.stm32@gmail.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
---
arch/arm/boot/dts/armv7-m.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/armv7-m.dtsi b/arch/arm/boot/dts/armv7-m.dtsi
index 5a660d0..b1ad7cf 100644
--- a/arch/arm/boot/dts/armv7-m.dtsi
+++ b/arch/arm/boot/dts/armv7-m.dtsi
@@ -8,6 +8,12 @@
reg = <0xe000e100 0xc00>;
};
+ systick: timer@e000e010 {
+ compatible = "arm,armv7m-systick";
+ reg = <0xe000e010 0x10>;
+ status = "disabled";
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
--
1.9.1
^ permalink raw reply related
* [PATCH v5 11/15] ARM: Add STM32 family machine
From: Maxime Coquelin @ 2015-04-03 17:01 UTC (permalink / raw)
To: u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ, afaerber-l3A5Bk7waGM,
geert-Td1EMuHUCqxL1ZNQvxDV9g, Rob Herring, Philipp Zabel,
Linus Walleij, Arnd Bergmann, stefan-XLVq0VzYD2Y,
pmeerw-jW+XmwGofnusTnJN9+BGXg, pebolle-IWqWACnzNjzz+pZb47iToQ,
peter-WaGBZJeGNqdsbIuE7sb01tBPR1lH4CV8,
andy.shevchenko-Re5JQEeQqe8AvxtiuMwx3w,
cw00.choi-Sze3O3UU22JBDgjK7y7TUQ, Russell King, Daniel Lezcano
Cc: Jonathan Corbet, Pawel Moll, Mark Rutland, Ian Campbell,
Kumar Gala, Thomas Gleixner, Greg Kroah-Hartman, Jiri Slaby,
Andrew Morton, David S. Miller, Mauro Carvalho Chehab,
Joe Perches, Antti Palosaari, Tejun Heo, Will Deacon,
Nikolay Borisov, Rusty Russell, Kees Cook, Michal Marek,
linux-doc-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-gpio-u79uwXL29TY76Z2rM5mHXA, linux-serial-fy+rA21nqHI
In-Reply-To: <1428080481-18591-1-git-send-email-mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
STMicrolectronics's STM32 series is a family of Cortex-M
microcontrollers. It is used in various applications, and
proposes a wide range of peripherals.
Tested-by: Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
Documentation/arm/stm32/overview.txt | 32 ++++++++++++++++++++++++++
Documentation/arm/stm32/stm32f429-overview.txt | 22 ++++++++++++++++++
arch/arm/Kconfig | 18 +++++++++++++++
arch/arm/Makefile | 1 +
arch/arm/mach-stm32/Makefile | 1 +
arch/arm/mach-stm32/Makefile.boot | 3 +++
arch/arm/mach-stm32/board-dt.c | 19 +++++++++++++++
7 files changed, 96 insertions(+)
create mode 100644 Documentation/arm/stm32/overview.txt
create mode 100644 Documentation/arm/stm32/stm32f429-overview.txt
create mode 100644 arch/arm/mach-stm32/Makefile
create mode 100644 arch/arm/mach-stm32/Makefile.boot
create mode 100644 arch/arm/mach-stm32/board-dt.c
diff --git a/Documentation/arm/stm32/overview.txt b/Documentation/arm/stm32/overview.txt
new file mode 100644
index 0000000..09aed55
--- /dev/null
+++ b/Documentation/arm/stm32/overview.txt
@@ -0,0 +1,32 @@
+ STM32 ARM Linux Overview
+ ========================
+
+Introduction
+------------
+
+ The STMicroelectronics family of Cortex-M based MCUs are supported by the
+ 'STM32' platform of ARM Linux. Currently only the STM32F429 is supported.
+
+
+Configuration
+-------------
+
+ A generic configuration is provided for STM32 family, and can be used as the
+ default by
+ make stm32_defconfig
+
+Layout
+------
+
+ All the files for multiple machine families are located in the platform code
+ contained in arch/arm/mach-stm32
+
+ There is a generic board board-dt.c in the mach folder which support
+ Flattened Device Tree, which means, it works with any compatible board with
+ Device Trees.
+
+
+Document Author
+---------------
+
+ Maxime Coquelin <mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
diff --git a/Documentation/arm/stm32/stm32f429-overview.txt b/Documentation/arm/stm32/stm32f429-overview.txt
new file mode 100644
index 0000000..5206822
--- /dev/null
+++ b/Documentation/arm/stm32/stm32f429-overview.txt
@@ -0,0 +1,22 @@
+ STM32F429 Overview
+ ==================
+
+ Introduction
+ ------------
+ The STM32F429 is a Cortex-M4 MCU aimed at various applications.
+ It features:
+ - ARM Cortex-M4 up to 180MHz with FPU
+ - 2MB internal Flash Memory
+ - External memory support through FMC controller (PSRAM, SDRAM, NOR, NAND)
+ - I2C, SPI, SAI, CAN, USB OTG, Ethernet controllers
+ - LCD controller & Camera interface
+ - Cryptographic processor
+
+ Resources
+ ---------
+ Datasheet and reference manual are publicly available on ST website:
+ - http://www.st.com/web/en/catalog/mmc/FM141/SC1169/SS1577/LN1806?ecmp=stm32f429-439_pron_pr-ces2014_nov2013
+
+ Document Author
+ ---------------
+ Maxime Coquelin <mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9f1f09a..5b1157d 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -776,6 +776,24 @@ config ARCH_OMAP1
help
Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
+config ARCH_STM32
+ bool "STMicrolectronics STM32"
+ depends on !MMU
+ select ARCH_HAS_RESET_CONTROLLER
+ select ARM_NVIC
+ select ARMV7M_SYSTICK
+ select AUTO_ZRELADDR
+ select CLKSRC_OF
+ select COMMON_CLK
+ select CPU_V7M
+ select GENERIC_CLOCKEVENTS
+ select NO_IOPORT_MAP
+ select RESET_CONTROLLER
+ select SPARSE_IRQ
+ select USE_OF
+ help
+ Support for STMicroelectronics STM32 processors.
+
endchoice
menu "Multiple platform selection"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 7f99cd6..982c104 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -196,6 +196,7 @@ machine-$(CONFIG_ARCH_SHMOBILE) += shmobile
machine-$(CONFIG_ARCH_SIRF) += prima2
machine-$(CONFIG_ARCH_SOCFPGA) += socfpga
machine-$(CONFIG_ARCH_STI) += sti
+machine-$(CONFIG_ARCH_STM32) += stm32
machine-$(CONFIG_ARCH_SUNXI) += sunxi
machine-$(CONFIG_ARCH_TEGRA) += tegra
machine-$(CONFIG_ARCH_U300) += u300
diff --git a/arch/arm/mach-stm32/Makefile b/arch/arm/mach-stm32/Makefile
new file mode 100644
index 0000000..bd0b7b5
--- /dev/null
+++ b/arch/arm/mach-stm32/Makefile
@@ -0,0 +1 @@
+obj-y += board-dt.o
diff --git a/arch/arm/mach-stm32/Makefile.boot b/arch/arm/mach-stm32/Makefile.boot
new file mode 100644
index 0000000..eacfc3f
--- /dev/null
+++ b/arch/arm/mach-stm32/Makefile.boot
@@ -0,0 +1,3 @@
+# Empty file waiting for deletion once Makefile.boot isn't needed any more.
+# Patch waits for application at
+# http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 .
diff --git a/arch/arm/mach-stm32/board-dt.c b/arch/arm/mach-stm32/board-dt.c
new file mode 100644
index 0000000..f2ad772
--- /dev/null
+++ b/arch/arm/mach-stm32/board-dt.c
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) Maxime Coquelin 2015
+ * Author: Maxime Coquelin <mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include <linux/kernel.h>
+#include <asm/v7m.h>
+#include <asm/mach/arch.h>
+
+static const char *const stm32_compat[] __initconst = {
+ "st,stm32f429",
+ NULL
+};
+
+DT_MACHINE_START(STM32DT, "STM32 (Device Tree Support)")
+ .dt_compat = stm32_compat,
+ .restart = armv7m_restart,
+MACHINE_END
--
1.9.1
^ permalink raw reply related
* [PATCH v5 10/15] serial: stm32-usart: Add STM32 USART Driver
From: Maxime Coquelin @ 2015-04-03 17:01 UTC (permalink / raw)
To: u.kleine-koenig, afaerber, geert, Rob Herring, Philipp Zabel,
Linus Walleij, Arnd Bergmann, stefan, pmeerw, pebolle, peter,
andy.shevchenko, cw00.choi, Russell King, Daniel Lezcano
Cc: Jonathan Corbet, Pawel Moll, Mark Rutland, Ian Campbell,
Kumar Gala, Thomas Gleixner, Greg Kroah-Hartman, Jiri Slaby,
Andrew Morton, David S. Miller, Mauro Carvalho Chehab,
Joe Perches, Antti Palosaari, Tejun Heo, Will Deacon,
Nikolay Borisov, Rusty Russell, Kees Cook, Michal Marek,
linux-doc, linux-arm-kernel, linux-kernel, devicetree, linux-gpio,
linux-serial
In-Reply-To: <1428080481-18591-1-git-send-email-mcoquelin.stm32@gmail.com>
This drivers adds support to the STM32 USART controller, which is a
standard serial driver.
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
---
drivers/tty/serial/Kconfig | 17 +
drivers/tty/serial/Makefile | 1 +
drivers/tty/serial/stm32-usart.c | 736 +++++++++++++++++++++++++++++++++++++++
include/uapi/linux/serial_core.h | 3 +
4 files changed, 757 insertions(+)
create mode 100644 drivers/tty/serial/stm32-usart.c
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index d2501f0..880cb4f 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1611,6 +1611,23 @@ config SERIAL_SPRD_CONSOLE
with "earlycon" on the kernel command line. The console is
enabled when early_param is processed.
+config SERIAL_STM32
+ tristate "STMicroelectronics STM32 serial port support"
+ select SERIAL_CORE
+ depends on ARM || COMPILE_TEST
+ help
+ This driver is for the on-chip Serial Controller on
+ STMicroelectronics STM32 MCUs.
+ USART supports Rx & Tx functionality.
+ It support all industry standard baud rates.
+
+ If unsure, say N.
+
+config SERIAL_STM32_CONSOLE
+ bool "Support for console on STM32"
+ depends on SERIAL_STM32=y
+ select SERIAL_CORE_CONSOLE
+
endmenu
config SERIAL_MCTRL_GPIO
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 599be4b..67c5023 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -95,6 +95,7 @@ obj-$(CONFIG_SERIAL_FSL_LPUART) += fsl_lpuart.o
obj-$(CONFIG_SERIAL_CONEXANT_DIGICOLOR) += digicolor-usart.o
obj-$(CONFIG_SERIAL_MEN_Z135) += men_z135_uart.o
obj-$(CONFIG_SERIAL_SPRD) += sprd_serial.o
+obj-$(CONFIG_SERIAL_STM32) += stm32-usart.o
# GPIOLIB helpers for modem control lines
obj-$(CONFIG_SERIAL_MCTRL_GPIO) += serial_mctrl_gpio.o
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
new file mode 100644
index 0000000..61e0e19
--- /dev/null
+++ b/drivers/tty/serial/stm32-usart.c
@@ -0,0 +1,736 @@
+/*
+ * Copyright (C) Maxime Coquelin 2015
+ * Author: Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Inspired by st-asc.c from STMicroelectronics (c)
+ */
+
+#if defined(CONFIG_SERIAL_STM32_USART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/serial.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/serial_core.h>
+#include <linux/clk.h>
+
+#define DRIVER_NAME "stm32-usart"
+
+/* Register offsets */
+#define USART_SR 0x00
+#define USART_DR 0x04
+#define USART_BRR 0x08
+#define USART_CR1 0x0c
+#define USART_CR2 0x10
+#define USART_CR3 0x14
+#define USART_GTPR 0x18
+
+/* USART_SR */
+#define USART_SR_PE BIT(0)
+#define USART_SR_FE BIT(1)
+#define USART_SR_NF BIT(2)
+#define USART_SR_ORE BIT(3)
+#define USART_SR_IDLE BIT(4)
+#define USART_SR_RXNE BIT(5)
+#define USART_SR_TC BIT(6)
+#define USART_SR_TXE BIT(7)
+#define USART_SR_LBD BIT(8)
+#define USART_SR_CTS BIT(9)
+#define USART_SR_ERR_MASK (USART_SR_LBD | USART_SR_ORE | \
+ USART_SR_FE | USART_SR_PE)
+/* Dummy bits */
+#define USART_SR_DUMMY_RX BIT(16)
+
+/* USART_DR */
+#define USART_DR_MASK GENMASK(8, 0)
+
+/* USART_BRR */
+#define USART_BRR_DIV_F_MASK GENMASK(3, 0)
+#define USART_BRR_DIV_M_MASK GENMASK(15, 4)
+#define USART_BRR_DIV_M_SHIFT 4
+
+/* USART_CR1 */
+#define USART_CR1_SBK BIT(0)
+#define USART_CR1_RWU BIT(1)
+#define USART_CR1_RE BIT(2)
+#define USART_CR1_TE BIT(3)
+#define USART_CR1_IDLEIE BIT(4)
+#define USART_CR1_RXNEIE BIT(5)
+#define USART_CR1_TCIE BIT(6)
+#define USART_CR1_TXEIE BIT(7)
+#define USART_CR1_PEIE BIT(8)
+#define USART_CR1_PS BIT(9)
+#define USART_CR1_PCE BIT(10)
+#define USART_CR1_WAKE BIT(11)
+#define USART_CR1_M BIT(12)
+#define USART_CR1_UE BIT(13)
+#define USART_CR1_OVER8 BIT(15)
+#define USART_CR1_IE_MASK GENMASK(8, 4)
+
+/* USART_CR2 */
+#define USART_CR2_ADD_MASK GENMASK(3, 0)
+#define USART_CR2_LBDL BIT(5)
+#define USART_CR2_LBDIE BIT(6)
+#define USART_CR2_LBCL BIT(8)
+#define USART_CR2_CPHA BIT(9)
+#define USART_CR2_CPOL BIT(10)
+#define USART_CR2_CLKEN BIT(11)
+#define USART_CR2_STOP_2B BIT(13)
+#define USART_CR2_STOP_MASK GENMASK(13, 12)
+#define USART_CR2_LINEN BIT(14)
+
+/* USART_CR3 */
+#define USART_CR3_EIE BIT(0)
+#define USART_CR3_IREN BIT(1)
+#define USART_CR3_IRLP BIT(2)
+#define USART_CR3_HDSEL BIT(3)
+#define USART_CR3_NACK BIT(4)
+#define USART_CR3_SCEN BIT(5)
+#define USART_CR3_DMAR BIT(6)
+#define USART_CR3_DMAT BIT(7)
+#define USART_CR3_RTSE BIT(8)
+#define USART_CR3_CTSE BIT(9)
+#define USART_CR3_CTSIE BIT(10)
+#define USART_CR3_ONEBIT BIT(11)
+
+/* USART_GTPR */
+#define USART_GTPR_PSC_MASK GENMASK(7, 0)
+#define USART_GTPR_GT_MASK GENMASK(15, 8)
+
+#define DRIVER_NAME "stm32-usart"
+#define STM32_SERIAL_NAME "ttyS"
+#define STM32_MAX_PORTS 6
+
+struct stm32_port {
+ struct uart_port port;
+ struct clk *clk;
+ bool hw_flow_control;
+};
+
+static struct stm32_port stm32_ports[STM32_MAX_PORTS];
+static struct uart_driver stm32_usart_driver;
+
+static void stm32_stop_tx(struct uart_port *port);
+
+static inline struct stm32_port *to_stm32_port(struct uart_port *port)
+{
+ return container_of(port, struct stm32_port, port);
+}
+
+static void stm32_set_bits(struct uart_port *port, u32 reg, u32 bits)
+{
+ u32 val;
+
+ val = readl_relaxed(port->membase + reg);
+ val |= bits;
+ writel_relaxed(val, port->membase + reg);
+}
+
+static void stm32_clr_bits(struct uart_port *port, u32 reg, u32 bits)
+{
+ u32 val;
+
+ val = readl_relaxed(port->membase + reg);
+ val &= ~bits;
+ writel_relaxed(val, port->membase + reg);
+}
+
+static void stm32_receive_chars(struct uart_port *port)
+{
+ struct tty_port *tport = &port->state->port;
+ unsigned long c;
+ u32 sr;
+ char flag;
+
+ if (port->irq_wake)
+ pm_wakeup_event(tport->tty->dev, 0);
+
+ while ((sr = readl_relaxed(port->membase + USART_SR)) & USART_SR_RXNE) {
+ sr |= USART_SR_DUMMY_RX;
+ c = readl_relaxed(port->membase + USART_DR);
+ flag = TTY_NORMAL;
+ port->icount.rx++;
+
+ if (sr & USART_SR_ERR_MASK) {
+ if (sr & USART_SR_LBD) {
+ port->icount.brk++;
+ if (uart_handle_break(port))
+ continue;
+ } else if (sr & USART_SR_ORE) {
+ port->icount.overrun++;
+ } else if (sr & USART_SR_PE) {
+ port->icount.parity++;
+ } else if (sr & USART_SR_FE) {
+ port->icount.frame++;
+ }
+
+ sr &= port->read_status_mask;
+
+ if (sr & USART_SR_LBD)
+ flag = TTY_BREAK;
+ else if (sr & USART_SR_PE)
+ flag = TTY_PARITY;
+ else if (sr & USART_SR_FE)
+ flag = TTY_FRAME;
+ }
+
+ if (uart_handle_sysrq_char(port, c))
+ continue;
+ uart_insert_char(port, sr, USART_SR_ORE, c, flag);
+ }
+
+ spin_unlock(&port->lock);
+ tty_flip_buffer_push(tport);
+ spin_lock(&port->lock);
+}
+
+static void stm32_transmit_chars(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->state->xmit;
+
+ if (port->x_char) {
+ writel_relaxed(port->x_char, port->membase + USART_DR);
+ port->x_char = 0;
+ port->icount.tx++;
+ return;
+ }
+
+ if (uart_tx_stopped(port)) {
+ stm32_stop_tx(port);
+ return;
+ }
+
+ if (uart_circ_empty(xmit)) {
+ stm32_stop_tx(port);
+ return;
+ }
+
+ writel_relaxed(xmit->buf[xmit->tail], port->membase + USART_DR);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (uart_circ_empty(xmit))
+ stm32_stop_tx(port);
+}
+
+static irqreturn_t stm32_interrupt(int irq, void *ptr)
+{
+ struct uart_port *port = ptr;
+ u32 sr;
+
+ spin_lock(&port->lock);
+
+ sr = readl_relaxed(port->membase + USART_SR);
+
+ if (sr & USART_SR_RXNE)
+ stm32_receive_chars(port);
+
+ if (sr & USART_SR_TXE)
+ stm32_transmit_chars(port);
+
+ spin_unlock(&port->lock);
+
+ return IRQ_HANDLED;
+}
+
+static unsigned int stm32_tx_empty(struct uart_port *port)
+{
+ return readl_relaxed(port->membase + USART_SR) & USART_SR_TXE;
+}
+
+static void stm32_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS))
+ stm32_set_bits(port, USART_CR3, USART_CR3_RTSE);
+ else
+ stm32_clr_bits(port, USART_CR3, USART_CR3_RTSE);
+}
+
+static unsigned int stm32_get_mctrl(struct uart_port *port)
+{
+ /* This routine is used to get signals of: DCD, DSR, RI, and CTS */
+ return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+}
+
+/* Transmit stop */
+static void stm32_stop_tx(struct uart_port *port)
+{
+ stm32_clr_bits(port, USART_CR1, USART_CR1_TXEIE);
+}
+
+
+/* There are probably characters waiting to be transmitted. */
+static void stm32_start_tx(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->state->xmit;
+
+ if (uart_circ_empty(xmit))
+ return;
+
+ stm32_set_bits(port, USART_CR1, USART_CR1_TXEIE | USART_CR1_TE);
+}
+
+/* Throttle the remote when input buffer is about to overflow. */
+static void stm32_throttle(struct uart_port *port)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ stm32_clr_bits(port, USART_CR1, USART_CR1_RXNEIE);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/* Unthrottle the remote, the input buffer can now accept data. */
+static void stm32_unthrottle(struct uart_port *port)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ stm32_set_bits(port, USART_CR1, USART_CR1_RXNEIE);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/* Receive stop */
+static void stm32_stop_rx(struct uart_port *port)
+{
+ stm32_clr_bits(port, USART_CR1, USART_CR1_RXNEIE);
+}
+
+/* Handle breaks - ignored by us */
+static void stm32_break_ctl(struct uart_port *port, int break_state)
+{
+}
+
+static int stm32_startup(struct uart_port *port)
+{
+ const char *name = to_platform_device(port->dev)->name;
+ u32 val;
+
+ if (request_irq(port->irq, stm32_interrupt, IRQF_NO_SUSPEND,
+ name, port)) {
+ dev_err(port->dev, "cannot allocate irq %d\n", port->irq);
+ return -ENODEV;
+ }
+
+ val = USART_CR1_RXNEIE | USART_CR1_TE | USART_CR1_RE;
+ stm32_set_bits(port, USART_CR1, val);
+
+ return 0;
+}
+
+static void stm32_shutdown(struct uart_port *port)
+{
+ u32 val;
+
+ val = USART_CR1_TXEIE | USART_CR1_RXNEIE | USART_CR1_TE | USART_CR1_RE;
+ stm32_set_bits(port, USART_CR1, val);
+
+ free_irq(port->irq, port);
+}
+
+static void stm32_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct stm32_port *stm32_port = to_stm32_port(port);
+ unsigned int baud;
+ u32 usartdiv, mantissa, fraction, oversampling;
+ tcflag_t cflag = termios->c_cflag;
+ u32 cr1, cr2, cr3;
+ unsigned long flags;
+
+ if (!stm32_port->hw_flow_control)
+ cflag &= ~CRTSCTS;
+
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 8);
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* Stop serial port and reset value */
+ writel_relaxed(0, port->membase + USART_CR1);
+
+ cr1 = USART_CR1_TE | USART_CR1_RE | USART_CR1_UE | USART_CR1_RXNEIE;
+
+ if (cflag & CSTOPB)
+ cr2 = USART_CR2_STOP_2B;
+
+ if (cflag & PARENB) {
+ cr1 |= USART_CR1_PCE;
+ if ((cflag & CSIZE) == CS8)
+ cr1 |= USART_CR1_M;
+ }
+
+ if (cflag & PARODD)
+ cr1 |= USART_CR1_PS;
+
+ port->status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS);
+ if (cflag & CRTSCTS) {
+ port->status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS;
+ cr3 = USART_CR3_CTSE;
+ }
+
+ usartdiv = DIV_ROUND_CLOSEST(port->uartclk, baud);
+
+ /*
+ * The USART supports 16 or 8 times oversampling.
+ * By default we prefer 16 times oversampling, so that the receiver
+ * has a better tolerance to clock deviations.
+ * 8 times oversampling is only used to achieve higher speeds.
+ */
+ if (usartdiv < 16) {
+ oversampling = 8;
+ stm32_set_bits(port, USART_CR1, USART_CR1_OVER8);
+ } else {
+ oversampling = 16;
+ stm32_clr_bits(port, USART_CR1, USART_CR1_OVER8);
+ }
+
+ mantissa = (usartdiv / oversampling) << USART_BRR_DIV_M_SHIFT;
+ fraction = usartdiv % oversampling;
+ writel_relaxed(mantissa | fraction, port->membase + USART_BRR);
+
+ uart_update_timeout(port, cflag, baud);
+
+ port->read_status_mask = USART_SR_ORE;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= USART_SR_PE | USART_SR_FE;
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
+ port->read_status_mask |= USART_SR_LBD;
+
+ /* Characters to ignore */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask = USART_SR_PE | USART_SR_FE;
+ if (termios->c_iflag & IGNBRK) {
+ port->ignore_status_mask |= USART_SR_LBD;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= USART_SR_ORE;
+ }
+
+ /* Ignore all characters if CREAD is not set */
+ if ((termios->c_cflag & CREAD) == 0)
+ port->ignore_status_mask |= USART_SR_DUMMY_RX;
+
+ writel_relaxed(cr3, port->membase + USART_CR3);
+ writel_relaxed(cr2, port->membase + USART_CR2);
+ writel_relaxed(cr1, port->membase + USART_CR1);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *stm32_type(struct uart_port *port)
+{
+ return (port->type == PORT_STM32) ? DRIVER_NAME : NULL;
+}
+
+static void stm32_release_port(struct uart_port *port)
+{
+}
+
+static int stm32_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+static void stm32_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE)
+ port->type = PORT_STM32;
+}
+
+static int
+stm32_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ /* No user changeable parameters */
+ return -EINVAL;
+}
+
+static void stm32_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+ struct stm32_port *stm32port = container_of(port,
+ struct stm32_port, port);
+ unsigned long flags = 0;
+
+ switch (state) {
+ case UART_PM_STATE_ON:
+ clk_prepare_enable(stm32port->clk);
+ break;
+ case UART_PM_STATE_OFF:
+ spin_lock_irqsave(&port->lock, flags);
+ stm32_clr_bits(port, USART_CR1, USART_CR1_UE);
+ spin_unlock_irqrestore(&port->lock, flags);
+ clk_disable_unprepare(stm32port->clk);
+ break;
+ }
+}
+
+static struct uart_ops stm32_uart_ops = {
+ .tx_empty = stm32_tx_empty,
+ .set_mctrl = stm32_set_mctrl,
+ .get_mctrl = stm32_get_mctrl,
+ .stop_tx = stm32_stop_tx,
+ .start_tx = stm32_start_tx,
+ .throttle = stm32_throttle,
+ .unthrottle = stm32_unthrottle,
+ .stop_rx = stm32_stop_rx,
+ .break_ctl = stm32_break_ctl,
+ .startup = stm32_startup,
+ .shutdown = stm32_shutdown,
+ .set_termios = stm32_set_termios,
+ .pm = stm32_pm,
+ .type = stm32_type,
+ .release_port = stm32_release_port,
+ .request_port = stm32_request_port,
+ .config_port = stm32_config_port,
+ .verify_port = stm32_verify_port,
+};
+
+static int stm32_init_port(struct stm32_port *stm32port,
+ struct platform_device *pdev)
+{
+ struct uart_port *port = &stm32port->port;
+ struct resource *res;
+ int ret;
+
+ port->iotype = UPIO_MEM;
+ port->flags = UPF_BOOT_AUTOCONF;
+ port->ops = &stm32_uart_ops;
+ port->dev = &pdev->dev;
+ port->irq = platform_get_irq(pdev, 0);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ port->membase = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(port->membase))
+ return PTR_ERR(port->membase);
+ port->mapbase = res->start;
+
+ spin_lock_init(&port->lock);
+
+ stm32port->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(stm32port->clk))
+ return PTR_ERR(stm32port->clk);
+
+ /* Ensure that clk rate is correct by enabling the clk */
+ ret = clk_prepare_enable(stm32port->clk);
+ if (ret)
+ return ret;
+
+ stm32port->port.uartclk = clk_get_rate(stm32port->clk);
+ if (!stm32port->port.uartclk)
+ ret = -EINVAL;
+
+ clk_disable_unprepare(stm32port->clk);
+
+ return ret;
+}
+
+static struct stm32_port *stm32_of_get_stm32_port(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ int id;
+
+ if (!np)
+ return NULL;
+
+ id = of_alias_get_id(np, "serial");
+ if (id < 0)
+ id = 0;
+
+ if (WARN_ON(id >= STM32_MAX_PORTS))
+ return NULL;
+
+ stm32_ports[id].hw_flow_control = of_property_read_bool(np,
+ "st,hw-flow-control");
+ stm32_ports[id].port.line = id;
+ return &stm32_ports[id];
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id stm32_match[] = {
+ { .compatible = "st,stm32-usart", },
+ { .compatible = "st,stm32-uart", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, stm32_match);
+#endif
+
+static int stm32_serial_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct stm32_port *stm32port;
+
+ stm32port = stm32_of_get_stm32_port(pdev);
+ if (!stm32port)
+ return -ENODEV;
+
+ ret = stm32_init_port(stm32port, pdev);
+ if (ret)
+ return ret;
+
+ ret = uart_add_one_port(&stm32_usart_driver, &stm32port->port);
+ if (ret)
+ return ret;
+
+ platform_set_drvdata(pdev, &stm32port->port);
+
+ return 0;
+}
+
+static int stm32_serial_remove(struct platform_device *pdev)
+{
+ struct uart_port *port = platform_get_drvdata(pdev);
+
+ return uart_remove_one_port(&stm32_usart_driver, port);
+}
+
+
+#ifdef CONFIG_SERIAL_STM32_CONSOLE
+static void stm32_console_putchar(struct uart_port *port, int ch)
+{
+ while (!(readl_relaxed(port->membase + USART_SR) & USART_SR_TXE))
+ cpu_relax();
+
+ writel_relaxed(ch, port->membase + USART_DR);
+}
+
+static void stm32_console_write(struct console *co, const char *s, unsigned cnt)
+{
+ struct uart_port *port = &stm32_ports[co->index].port;
+ unsigned long flags;
+ u32 old_cr1, new_cr1;
+ int locked = 1;
+
+ if (oops_in_progress) {
+ locked = spin_trylock_irqsave(&port->lock, flags);
+ } else {
+ locked = 1;
+ spin_lock_irqsave(&port->lock, flags);
+ }
+
+ /* Save and disable interrupts */
+ old_cr1 = readl_relaxed(port->membase + USART_CR1);
+ new_cr1 = old_cr1 & ~USART_CR1_IE_MASK;
+ writel_relaxed(new_cr1, port->membase + USART_CR1);
+
+ uart_console_write(port, s, cnt, stm32_console_putchar);
+
+ /* Restore interrupt state */
+ writel_relaxed(old_cr1, port->membase + USART_CR1);
+
+ if (locked)
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static int stm32_console_setup(struct console *co, char *options)
+{
+ struct stm32_port *stm32port;
+ int baud = 9600;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (co->index >= STM32_MAX_PORTS)
+ return -ENODEV;
+
+ stm32port = &stm32_ports[co->index];
+
+ /*
+ * This driver does not support early console initialization
+ * (use ARM early printk support instead), so we only expect
+ * this to be called during the uart port registration when the
+ * driver gets probed and the port should be mapped at that point.
+ */
+ if (stm32port->port.mapbase == 0 || stm32port->port.membase == NULL)
+ return -ENXIO;
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(&stm32port->port, co, baud, parity, bits, flow);
+}
+
+static struct console stm32_console = {
+ .name = STM32_SERIAL_NAME,
+ .device = uart_console_device,
+ .write = stm32_console_write,
+ .setup = stm32_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &stm32_usart_driver,
+};
+
+#define STM32_SERIAL_CONSOLE (&stm32_console)
+
+#else
+#define STM32_SERIAL_CONSOLE NULL
+#endif /* CONFIG_SERIAL_STM32_CONSOLE */
+
+static struct uart_driver stm32_usart_driver = {
+ .driver_name = DRIVER_NAME,
+ .dev_name = STM32_SERIAL_NAME,
+ .major = 0,
+ .minor = 0,
+ .nr = STM32_MAX_PORTS,
+ .cons = STM32_SERIAL_CONSOLE,
+};
+
+static struct platform_driver stm32_serial_driver = {
+ .probe = stm32_serial_probe,
+ .remove = stm32_serial_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ .of_match_table = of_match_ptr(stm32_match),
+ },
+};
+
+static int __init usart_init(void)
+{
+ static char banner[] __initdata = "STM32 USART driver initialized";
+ int ret;
+
+ pr_info("%s\n", banner);
+
+ ret = uart_register_driver(&stm32_usart_driver);
+ if (ret)
+ return ret;
+
+ ret = platform_driver_register(&stm32_serial_driver);
+ if (ret)
+ uart_unregister_driver(&stm32_usart_driver);
+
+ return ret;
+}
+
+static void __exit usart_exit(void)
+{
+ platform_driver_unregister(&stm32_serial_driver);
+ uart_unregister_driver(&stm32_usart_driver);
+}
+
+module_init(usart_init);
+module_exit(usart_exit);
+
+MODULE_ALIAS("platform:" DRIVER_NAME);
+MODULE_DESCRIPTION("STMicroelectronics STM32 serial port driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index b212281..93ba148 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -258,4 +258,7 @@
/* Cris v10 / v32 SoC */
#define PORT_CRIS 112
+/* STM32 USART */
+#define PORT_STM32 113
+
#endif /* _UAPILINUX_SERIAL_CORE_H */
--
1.9.1
^ permalink raw reply related
* [PATCH v5 09/15] dt-bindings: Document the STM32 USART bindings
From: Maxime Coquelin @ 2015-04-03 17:01 UTC (permalink / raw)
To: u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ, afaerber-l3A5Bk7waGM,
geert-Td1EMuHUCqxL1ZNQvxDV9g, Rob Herring, Philipp Zabel,
Linus Walleij, Arnd Bergmann, stefan-XLVq0VzYD2Y,
pmeerw-jW+XmwGofnusTnJN9+BGXg, pebolle-IWqWACnzNjzz+pZb47iToQ,
peter-WaGBZJeGNqdsbIuE7sb01tBPR1lH4CV8,
andy.shevchenko-Re5JQEeQqe8AvxtiuMwx3w,
cw00.choi-Sze3O3UU22JBDgjK7y7TUQ, Russell King, Daniel Lezcano
Cc: Jonathan Corbet, Pawel Moll, Mark Rutland, Ian Campbell,
Kumar Gala, Thomas Gleixner, Greg Kroah-Hartman, Jiri Slaby,
Andrew Morton, David S. Miller, Mauro Carvalho Chehab,
Joe Perches, Antti Palosaari, Tejun Heo, Will Deacon,
Nikolay Borisov, Rusty Russell, Kees Cook, Michal Marek,
linux-doc-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-gpio-u79uwXL29TY76Z2rM5mHXA, linux-serial-fy+rA21nqHI
In-Reply-To: <1428080481-18591-1-git-send-email-mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
This adds documentation of device tree bindings for the
STM32 USART
Tested-by: Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
.../devicetree/bindings/serial/st,stm32-usart.txt | 32 ++++++++++++++++++++++
1 file changed, 32 insertions(+)
create mode 100644 Documentation/devicetree/bindings/serial/st,stm32-usart.txt
diff --git a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
new file mode 100644
index 0000000..090a3a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
@@ -0,0 +1,32 @@
+* STMicroelectronics STM32 USART
+
+Required properties:
+- compatible: Can be either "st,stm32-usart" or "st,stm32-uart" depending on
+whether the device supports synchronous mode.
+- reg: The address and length of the peripheral registers space
+- interrupts: The interrupt line of the USART instance
+- clocks: The input clock of the USART instance
+
+Optional properties:
+- pinctrl: The reference on the pins configuration
+- st,hw-flow-ctrl: bool flag to enable hardware flow control.
+
+Examples:
+usart4: serial@40004c00 {
+ compatible = "st,stm32-uart";
+ reg = <0x40004c00 0x400>;
+ interrupts = <52>;
+ clocks = <&clk_pclk1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart4>;
+};
+
+usart2: serial@40004400 {
+ compatible = "st,stm32-usart", "st,stm32-uart";
+ reg = <0x40004400 0x400>;
+ interrupts = <38>;
+ clocks = <&clk_pclk1>;
+ st,hw-flow-ctrl;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rtscts>;
+};
--
1.9.1
^ permalink raw reply related
* [PATCH v5 08/15] clockevents/drivers: Add STM32 Timer driver
From: Maxime Coquelin @ 2015-04-03 17:01 UTC (permalink / raw)
To: u.kleine-koenig, afaerber, geert, Rob Herring, Philipp Zabel,
Linus Walleij, Arnd Bergmann, stefan, pmeerw, pebolle, peter,
andy.shevchenko, cw00.choi, Russell King, Daniel Lezcano
Cc: Jonathan Corbet, Pawel Moll, Mark Rutland, Ian Campbell,
Kumar Gala, Thomas Gleixner, Greg Kroah-Hartman, Jiri Slaby,
Andrew Morton, David S. Miller, Mauro Carvalho Chehab,
Joe Perches, Antti Palosaari, Tejun Heo, Will Deacon,
Nikolay Borisov, Rusty Russell, Kees Cook, Michal Marek,
linux-doc, linux-arm-kernel, linux-kernel, devicetree, linux-gpio,
linux-serial
In-Reply-To: <1428080481-18591-1-git-send-email-mcoquelin.stm32@gmail.com>
STM32 MCUs feature 16 and 32 bits general purpose timers with prescalers.
The drivers detects whether the time is 16 or 32 bits, and applies a
1024 prescaler value if it is 16 bits.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
---
drivers/clocksource/Kconfig | 8 ++
drivers/clocksource/Makefile | 1 +
drivers/clocksource/timer-stm32.c | 184 ++++++++++++++++++++++++++++++++++++++
3 files changed, 193 insertions(+)
create mode 100644 drivers/clocksource/timer-stm32.c
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index b82e58b..519304b 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -101,6 +101,14 @@ config CLKSRC_EFM32
Support to use the timers of EFM32 SoCs as clock source and clock
event device.
+config CLKSRC_STM32
+ bool "Clocksource for STM32 SoCs" if !ARCH_STM32
+ depends on OF && ARM && (ARCH_STM32 || COMPILE_TEST)
+ select CLKSRC_MMIO
+ default ARCH_STM32
+ help
+ Support to use the timers of STM32 SoCs as clock event device.
+
config ARM_ARCH_TIMER
bool
select CLKSRC_OF if OF
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 1c9a643..525dafe 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_ARCH_NSPIRE) += zevio-timer.o
obj-$(CONFIG_ARCH_BCM_MOBILE) += bcm_kona_timer.o
obj-$(CONFIG_CADENCE_TTC_TIMER) += cadence_ttc_timer.o
obj-$(CONFIG_CLKSRC_EFM32) += time-efm32.o
+obj-$(CONFIG_CLKSRC_STM32) += timer-stm32.o
obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o
obj-$(CONFIG_CLKSRC_SAMSUNG_PWM) += samsung_pwm_timer.o
obj-$(CONFIG_FSL_FTM_TIMER) += fsl_ftm_timer.o
diff --git a/drivers/clocksource/timer-stm32.c b/drivers/clocksource/timer-stm32.c
new file mode 100644
index 0000000..fad2e2e
--- /dev/null
+++ b/drivers/clocksource/timer-stm32.c
@@ -0,0 +1,184 @@
+/*
+ * Copyright (C) Maxime Coquelin 2015
+ * Author: Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Inspired by time-efm32.c from Uwe Kleine-Koenig
+ */
+
+#include <linux/kernel.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/clk.h>
+#include <linux/reset.h>
+
+#define TIM_CR1 0x00
+#define TIM_DIER 0x0c
+#define TIM_SR 0x10
+#define TIM_EGR 0x14
+#define TIM_PSC 0x28
+#define TIM_ARR 0x2c
+
+#define TIM_CR1_CEN BIT(0)
+#define TIM_CR1_OPM BIT(3)
+#define TIM_CR1_ARPE BIT(7)
+
+#define TIM_DIER_UIE BIT(0)
+
+#define TIM_SR_UIF BIT(0)
+
+#define TIM_EGR_UG BIT(0)
+
+struct stm32_clock_event_ddata {
+ struct clock_event_device evtdev;
+ unsigned periodic_top;
+ void __iomem *base;
+};
+
+static void stm32_clock_event_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evtdev)
+{
+ struct stm32_clock_event_ddata *data =
+ container_of(evtdev, struct stm32_clock_event_ddata, evtdev);
+ void *base = data->base;
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ writel_relaxed(data->periodic_top, base + TIM_ARR);
+ writel_relaxed(TIM_CR1_ARPE | TIM_CR1_CEN, base + TIM_CR1);
+ break;
+
+ case CLOCK_EVT_MODE_ONESHOT:
+ default:
+ writel_relaxed(0, base + TIM_CR1);
+ break;
+ }
+}
+
+static int stm32_clock_event_set_next_event(unsigned long evt,
+ struct clock_event_device *evtdev)
+{
+ struct stm32_clock_event_ddata *data =
+ container_of(evtdev, struct stm32_clock_event_ddata, evtdev);
+
+ writel_relaxed(evt, data->base + TIM_ARR);
+ writel_relaxed(TIM_CR1_ARPE | TIM_CR1_OPM | TIM_CR1_CEN,
+ data->base + TIM_CR1);
+
+ return 0;
+}
+
+static irqreturn_t stm32_clock_event_handler(int irq, void *dev_id)
+{
+ struct stm32_clock_event_ddata *data = dev_id;
+
+ writel_relaxed(0, data->base + TIM_SR);
+
+ data->evtdev.event_handler(&data->evtdev);
+
+ return IRQ_HANDLED;
+}
+
+static struct stm32_clock_event_ddata clock_event_ddata = {
+ .evtdev = {
+ .name = "stm32 clockevent",
+ .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
+ .set_mode = stm32_clock_event_set_mode,
+ .set_next_event = stm32_clock_event_set_next_event,
+ .rating = 200,
+ },
+};
+
+static void __init stm32_clockevent_init(struct device_node *np)
+{
+ struct stm32_clock_event_ddata *data = &clock_event_ddata;
+ struct clk *clk;
+ struct reset_control *rstc;
+ unsigned long rate, max_delta;
+ int irq, ret, bits, prescaler = 1;
+
+ clk = of_clk_get(np, 0);
+ if (IS_ERR(clk)) {
+ ret = PTR_ERR(clk);
+ pr_err("failed to get clock for clockevent (%d)\n", ret);
+ goto err_clk_get;
+ }
+
+ ret = clk_prepare_enable(clk);
+ if (ret) {
+ pr_err("failed to enable timer clock for clockevent (%d)\n",
+ ret);
+ goto err_clk_enable;
+ }
+
+ rate = clk_get_rate(clk);
+
+ rstc = of_reset_control_get(np, NULL);
+ if (!IS_ERR(rstc)) {
+ reset_control_assert(rstc);
+ reset_control_deassert(rstc);
+ }
+
+ data->base = of_iomap(np, 0);
+ if (!data->base) {
+ pr_err("failed to map registers for clockevent\n");
+ goto err_iomap;
+ }
+
+ irq = irq_of_parse_and_map(np, 0);
+ if (!irq) {
+ pr_err("%s: failed to get irq.\n", np->full_name);
+ goto err_get_irq;
+ }
+
+ /* Detect whether the timer is 16 or 32 bits */
+ writel_relaxed(~0UL, data->base + TIM_ARR);
+ max_delta = readl_relaxed(data->base + TIM_ARR);
+ if (max_delta == ~0UL) {
+ prescaler = 1;
+ bits = 32;
+ } else {
+ prescaler = 1024;
+ bits = 16;
+ }
+ writel_relaxed(0, data->base + TIM_ARR);
+
+ writel_relaxed(prescaler - 1, data->base + TIM_PSC);
+ writel_relaxed(TIM_EGR_UG, data->base + TIM_EGR);
+ writel_relaxed(TIM_DIER_UIE, data->base + TIM_DIER);
+ writel_relaxed(0, data->base + TIM_SR);
+
+ data->periodic_top = DIV_ROUND_CLOSEST(rate, prescaler * HZ);
+
+ clockevents_config_and_register(&data->evtdev,
+ DIV_ROUND_CLOSEST(rate, prescaler),
+ 0x1, max_delta);
+
+ ret = request_irq(irq, stm32_clock_event_handler, IRQF_TIMER,
+ "stm32 clockevent", data);
+ if (ret) {
+ pr_err("%s: failed to request irq.\n", np->full_name);
+ goto err_get_irq;
+ }
+
+ pr_info("%s: STM32 clockevent driver initialized (%d bits)\n",
+ np->full_name, bits);
+
+ return;
+
+err_get_irq:
+ iounmap(data->base);
+err_iomap:
+ clk_disable_unprepare(clk);
+err_clk_enable:
+ clk_put(clk);
+err_clk_get:
+ return;
+}
+
+CLOCKSOURCE_OF_DECLARE(stm32, "st,stm32-timer", stm32_clockevent_init);
--
1.9.1
^ permalink raw reply related
* [PATCH v5 07/15] dt-bindings: Document the STM32 timer bindings
From: Maxime Coquelin @ 2015-04-03 17:01 UTC (permalink / raw)
To: u.kleine-koenig, afaerber, geert, Rob Herring, Philipp Zabel,
Linus Walleij, Arnd Bergmann, stefan, pmeerw, pebolle, peter,
andy.shevchenko, cw00.choi, Russell King, Daniel Lezcano
Cc: Jonathan Corbet, Pawel Moll, Mark Rutland, Ian Campbell,
Kumar Gala, Thomas Gleixner, Greg Kroah-Hartman, Jiri Slaby,
Andrew Morton, David S. Miller, Mauro Carvalho Chehab,
Joe Perches, Antti Palosaari, Tejun Heo, Will Deacon,
Nikolay Borisov, Rusty Russell, Kees Cook, Michal Marek,
linux-doc, linux-arm-kernel, linux-kernel, devicetree, linux-gpio,
linux-serial
In-Reply-To: <1428080481-18591-1-git-send-email-mcoquelin.stm32@gmail.com>
This adds documentation of device tree bindings for the
STM32 timer.
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
---
.../devicetree/bindings/timer/st,stm32-timer.txt | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/timer/st,stm32-timer.txt
diff --git a/Documentation/devicetree/bindings/timer/st,stm32-timer.txt b/Documentation/devicetree/bindings/timer/st,stm32-timer.txt
new file mode 100644
index 0000000..d3fdeb0
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/st,stm32-timer.txt
@@ -0,0 +1,22 @@
+. STMicroelectronics STM32 timer
+
+The STM32 MCUs family has several general-purpose 16 and 32 bits timers.
+
+Required properties:
+- compatible : Should be st,stm32-timer"
+- reg : Address and length of the register set
+- clocks : Reference on the timer input clock
+- interrupts : Reference to the timer interrupt
+
+Optional properties:
+- resets: Reference to a reset controller asserting the timer
+
+Example:
+
+timer5: timer@40000c00 {
+ compatible = "st,stm32-timer";
+ reg = <0x40000c00 0x400>;
+ interrupts = <50>;
+ resets = <&rrc 259>;
+ clocks = <&clk_pmtr1>;
+};
--
1.9.1
^ permalink raw reply related
* [PATCH v5 06/15] drivers: reset: Add STM32 reset driver
From: Maxime Coquelin @ 2015-04-03 17:01 UTC (permalink / raw)
To: u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ, afaerber-l3A5Bk7waGM,
geert-Td1EMuHUCqxL1ZNQvxDV9g, Rob Herring, Philipp Zabel,
Linus Walleij, Arnd Bergmann, stefan-XLVq0VzYD2Y,
pmeerw-jW+XmwGofnusTnJN9+BGXg, pebolle-IWqWACnzNjzz+pZb47iToQ,
peter-WaGBZJeGNqdsbIuE7sb01tBPR1lH4CV8,
andy.shevchenko-Re5JQEeQqe8AvxtiuMwx3w,
cw00.choi-Sze3O3UU22JBDgjK7y7TUQ, Russell King, Daniel Lezcano
Cc: Jonathan Corbet, Pawel Moll, Mark Rutland, Ian Campbell,
Kumar Gala, Thomas Gleixner, Greg Kroah-Hartman, Jiri Slaby,
Andrew Morton, David S. Miller, Mauro Carvalho Chehab,
Joe Perches, Antti Palosaari, Tejun Heo, Will Deacon,
Nikolay Borisov, Rusty Russell, Kees Cook, Michal Marek,
linux-doc-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-gpio-u79uwXL29TY76Z2rM5mHXA, linux-serial-fy+rA21nqHI
In-Reply-To: <1428080481-18591-1-git-send-email-mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
The STM32 MCUs family IPs can be reset by accessing some registers
from the RCC block.
The list of available reset lines is documented in the DT bindings.
Tested-by: Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Acked-by: Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
drivers/reset/Makefile | 1 +
drivers/reset/reset-stm32.c | 124 ++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 125 insertions(+)
create mode 100644 drivers/reset/reset-stm32.c
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 157d421..aed12d1 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -1,5 +1,6 @@
obj-$(CONFIG_RESET_CONTROLLER) += core.o
obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
obj-$(CONFIG_ARCH_BERLIN) += reset-berlin.o
+obj-$(CONFIG_ARCH_STM32) += reset-stm32.o
obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
obj-$(CONFIG_ARCH_STI) += sti/
diff --git a/drivers/reset/reset-stm32.c b/drivers/reset/reset-stm32.c
new file mode 100644
index 0000000..2c41858
--- /dev/null
+++ b/drivers/reset/reset-stm32.c
@@ -0,0 +1,124 @@
+/*
+ * Copyright (C) Maxime Coquelin 2015
+ * Author: Maxime Coquelin <mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Heavily based on sunxi driver from Maxime Ripard.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+struct stm32_reset_data {
+ spinlock_t lock;
+ void __iomem *membase;
+ struct reset_controller_dev rcdev;
+};
+
+static int stm32_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct stm32_reset_data *data = container_of(rcdev,
+ struct stm32_reset_data,
+ rcdev);
+ int bank = id / BITS_PER_LONG;
+ int offset = id % BITS_PER_LONG;
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(&data->lock, flags);
+
+ reg = readl_relaxed(data->membase + (bank * 4));
+ writel_relaxed(reg | BIT(offset), data->membase + (bank * 4));
+
+ spin_unlock_irqrestore(&data->lock, flags);
+
+ return 0;
+}
+
+static int stm32_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct stm32_reset_data *data = container_of(rcdev,
+ struct stm32_reset_data,
+ rcdev);
+ int bank = id / BITS_PER_LONG;
+ int offset = id % BITS_PER_LONG;
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(&data->lock, flags);
+
+ reg = readl_relaxed(data->membase + (bank * 4));
+ writel_relaxed(reg & ~BIT(offset), data->membase + (bank * 4));
+
+ spin_unlock_irqrestore(&data->lock, flags);
+
+ return 0;
+}
+
+static struct reset_control_ops stm32_reset_ops = {
+ .assert = stm32_reset_assert,
+ .deassert = stm32_reset_deassert,
+};
+
+static const struct of_device_id stm32_reset_dt_ids[] = {
+ { .compatible = "st,stm32-rcc", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, sstm32_reset_dt_ids);
+
+static int stm32_reset_probe(struct platform_device *pdev)
+{
+ struct stm32_reset_data *data;
+ struct resource *res;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ data->membase = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(data->membase))
+ return PTR_ERR(data->membase);
+
+ spin_lock_init(&data->lock);
+
+ data->rcdev.owner = THIS_MODULE;
+ data->rcdev.nr_resets = resource_size(res) * 8;
+ data->rcdev.ops = &stm32_reset_ops;
+ data->rcdev.of_node = pdev->dev.of_node;
+
+ return reset_controller_register(&data->rcdev);
+}
+
+static int stm32_reset_remove(struct platform_device *pdev)
+{
+ struct stm32_reset_data *data = platform_get_drvdata(pdev);
+
+ reset_controller_unregister(&data->rcdev);
+
+ return 0;
+}
+
+static struct platform_driver stm32_reset_driver = {
+ .probe = stm32_reset_probe,
+ .remove = stm32_reset_remove,
+ .driver = {
+ .name = "stm32-rcc-reset",
+ .of_match_table = stm32_reset_dt_ids,
+ },
+};
+module_platform_driver(stm32_reset_driver);
+
+MODULE_AUTHOR("Maxime Coquelin <maxime.coquelin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>");
+MODULE_DESCRIPTION("STM32 MCUs Reset Controller Driver");
+MODULE_LICENSE("GPL");
--
1.9.1
^ permalink raw reply related
* [PATCH v5 05/15] dt-bindings: Document the STM32 reset bindings
From: Maxime Coquelin @ 2015-04-03 17:01 UTC (permalink / raw)
To: u.kleine-koenig, afaerber, geert, Rob Herring, Philipp Zabel,
Linus Walleij, Arnd Bergmann, stefan, pmeerw, pebolle, peter,
andy.shevchenko, cw00.choi, Russell King, Daniel Lezcano
Cc: Mark Rutland, linux-doc, Will Deacon, Nikolay Borisov, linux-api,
Jiri Slaby, linux-arch, Jonathan Corbet, Mauro Carvalho Chehab,
Antti Palosaari, linux-serial, devicetree, Kees Cook, Pawel Moll,
Ian Campbell, Rusty Russell, Joe Perches, Thomas Gleixner,
linux-arm-kernel, Michal Marek, linux-gpio, Greg Kroah-Hartman,
linux-kernel, mcoquelin.stm32, Kumar Gala, Tejun Heo
In-Reply-To: <1428080481-18591-1-git-send-email-mcoquelin.stm32@gmail.com>
This adds documentation of device tree bindings for the
STM32 reset controller.
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
---
.../devicetree/bindings/reset/st,stm32-rcc.txt | 107 +++++++++++++++++++++
1 file changed, 107 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
diff --git a/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt b/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
new file mode 100644
index 0000000..c1b0f8d
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
@@ -0,0 +1,107 @@
+STMicroelectronics STM32 Peripheral Reset Controller
+====================================================
+
+The RCC IP is both a reset and a clock controller. This documentation only
+documents the reset part.
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be "st,stm32-rcc"
+- reg: should be register base and length as documented in the
+ datasheet
+- #reset-cells: 1, see below
+
+example:
+
+rcc: reset@40023800 {
+ #reset-cells = <1>;
+ compatible = "st,stm32-rcc";
+ reg = <0x40023800 0x400>;
+};
+
+Specifying softreset control of devices
+=======================================
+
+Device nodes should specify the reset channel required in their "resets"
+property, containing a phandle to the reset device node and an index specifying
+which channel to use.
+The index is the bit number within the RCC registers bank, starting from RCC
+base address.
+It is calculated as: index = register_offset / 4 * 32 + bit_offset.
+Where bit_offset is the bit offset within the register.
+For example, for CRC reset:
+ crc = AHB1RSTR_offset / 4 * 32 + CRCRST_bit_offset = 0x10 / 4 * 32 + 12 = 140
+
+example:
+
+ timer2 {
+ resets = <&rcc 256>;
+ };
+
+List of valid indices for STM32F429:
+ - gpioa: 128
+ - gpiob: 129
+ - gpioc: 130
+ - gpiod: 131
+ - gpioe: 132
+ - gpiof: 133
+ - gpiog: 134
+ - gpioh: 135
+ - gpioi: 136
+ - gpioj: 137
+ - gpiok: 138
+ - crc: 140
+ - dma1: 149
+ - dma2: 150
+ - dma2d: 151
+ - ethmac: 153
+ - otghs: 157
+ - dcmi: 160
+ - cryp: 164
+ - hash: 165
+ - rng: 166
+ - otgfs: 167
+ - fmc: 192
+ - tim2: 256
+ - tim3: 257
+ - tim4: 258
+ - tim5: 259
+ - tim6: 260
+ - tim7: 261
+ - tim12: 262
+ - tim13: 263
+ - tim14: 264
+ - wwdg: 267
+ - spi2: 270
+ - spi3: 271
+ - uart2: 273
+ - uart3: 274
+ - uart4: 275
+ - uart5: 276
+ - i2c1: 277
+ - i2c2: 278
+ - i2c3: 279
+ - can1: 281
+ - can2: 282
+ - pwr: 284
+ - dac: 285
+ - uart7: 286
+ - uart8: 287
+ - tim1: 288
+ - tim8: 289
+ - usart1: 292
+ - usart6: 293
+ - adc: 296
+ - sdio: 299
+ - spi1: 300
+ - spi4: 301
+ - syscfg: 302
+ - tim9: 304
+ - tim10: 305
+ - tim11: 306
+ - spi5: 308
+ - spi6: 309
+ - sai1: 310
+ - ltdc: 314
--
1.9.1
^ permalink raw reply related
* [PATCH v5 04/15] clocksource/drivers: Add ARM System timer driver
From: Maxime Coquelin @ 2015-04-03 17:01 UTC (permalink / raw)
To: u.kleine-koenig, afaerber, geert, Rob Herring, Philipp Zabel,
Linus Walleij, Arnd Bergmann, stefan, pmeerw, pebolle, peter,
andy.shevchenko, cw00.choi, Russell King, Daniel Lezcano
Cc: Mark Rutland, linux-doc, Will Deacon, Nikolay Borisov, linux-api,
Jiri Slaby, linux-arch, Jonathan Corbet, Mauro Carvalho Chehab,
Antti Palosaari, linux-serial, devicetree, Kees Cook, Pawel Moll,
Ian Campbell, Rusty Russell, Joe Perches, Thomas Gleixner,
linux-arm-kernel, Michal Marek, linux-gpio, Greg Kroah-Hartman,
linux-kernel, mcoquelin.stm32, Kumar Gala, Tejun Heo
In-Reply-To: <1428080481-18591-1-git-send-email-mcoquelin.stm32@gmail.com>
This patch adds clocksource support for ARMv7-M's System timer,
also known as SysTick.
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
---
drivers/clocksource/Kconfig | 7 ++++
drivers/clocksource/Makefile | 1 +
drivers/clocksource/armv7m_systick.c | 79 ++++++++++++++++++++++++++++++++++++
3 files changed, 87 insertions(+)
create mode 100644 drivers/clocksource/armv7m_systick.c
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 1c2506f..b82e58b 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -134,6 +134,13 @@ config CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
help
Use ARM global timer clock source as sched_clock
+config ARMV7M_SYSTICK
+ bool
+ select CLKSRC_OF if OF
+ select CLKSRC_MMIO
+ help
+ This options enables support for the ARMv7M system timer unit
+
config ATMEL_PIT
select CLKSRC_OF if OF
def_bool SOC_AT91SAM9 || SOC_SAMA5
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 752d5c7..1c9a643 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_MTK_TIMER) += mtk_timer.o
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o
+obj-$(CONFIG_ARMV7M_SYSTICK) += armv7m_systick.o
obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o
obj-$(CONFIG_ARCH_HAS_TICK_BROADCAST) += dummy_timer.o
obj-$(CONFIG_ARCH_KEYSTONE) += timer-keystone.o
diff --git a/drivers/clocksource/armv7m_systick.c b/drivers/clocksource/armv7m_systick.c
new file mode 100644
index 0000000..addfd2c
--- /dev/null
+++ b/drivers/clocksource/armv7m_systick.c
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) Maxime Coquelin 2015
+ * Author: Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include <linux/kernel.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk.h>
+#include <linux/bitops.h>
+
+#define SYST_CSR 0x00
+#define SYST_RVR 0x04
+#define SYST_CVR 0x08
+#define SYST_CALIB 0x0c
+
+#define SYST_CSR_ENABLE BIT(0)
+
+#define SYSTICK_LOAD_RELOAD_MASK 0x00FFFFFF
+
+static void __init system_timer_of_register(struct device_node *np)
+{
+ struct clk *clk = NULL;
+ void __iomem *base;
+ u32 rate;
+ int ret;
+
+ base = of_iomap(np, 0);
+ if (!base) {
+ pr_warn("system-timer: invalid base address\n");
+ return;
+ }
+
+ ret = of_property_read_u32(np, "clock-frequency", &rate);
+ if (ret) {
+ clk = of_clk_get(np, 0);
+ if (IS_ERR(clk))
+ goto out_unmap;
+
+ ret = clk_prepare_enable(clk);
+ if (ret)
+ goto out_clk_put;
+
+ rate = clk_get_rate(clk);
+ if (!rate)
+ goto out_clk_disable;
+ }
+
+ writel_relaxed(SYSTICK_LOAD_RELOAD_MASK, base + SYST_RVR);
+ writel_relaxed(SYST_CSR_ENABLE, base + SYST_CSR);
+
+ ret = clocksource_mmio_init(base + SYST_CVR, "arm_system_timer", rate,
+ 200, 24, clocksource_mmio_readl_down);
+ if (ret) {
+ pr_err("failed to init clocksource (%d)\n", ret);
+ if (clk)
+ goto out_clk_disable;
+ else
+ goto out_unmap;
+ }
+
+ pr_info("ARM System timer initialized as clocksource\n");
+
+ return;
+
+out_clk_disable:
+ clk_disable_unprepare(clk);
+out_clk_put:
+ clk_put(clk);
+out_unmap:
+ iounmap(base);
+ pr_warn("ARM System timer register failed (%d)\n", ret);
+}
+
+CLOCKSOURCE_OF_DECLARE(arm_systick, "arm,armv7m-systick",
+ system_timer_of_register);
--
1.9.1
^ permalink raw reply related
* [PATCH v5 03/15] dt-bindings: Document the ARM System timer bindings
From: Maxime Coquelin @ 2015-04-03 17:01 UTC (permalink / raw)
To: u.kleine-koenig, afaerber, geert, Rob Herring, Philipp Zabel,
Linus Walleij, Arnd Bergmann, stefan, pmeerw, pebolle, peter,
andy.shevchenko, cw00.choi, Russell King, Daniel Lezcano
Cc: Jonathan Corbet, Pawel Moll, Mark Rutland, Ian Campbell,
Kumar Gala, Thomas Gleixner, Greg Kroah-Hartman, Jiri Slaby,
Andrew Morton, David S. Miller, Mauro Carvalho Chehab,
Joe Perches, Antti Palosaari, Tejun Heo, Will Deacon,
Nikolay Borisov, Rusty Russell, Kees Cook, Michal Marek,
linux-doc, linux-arm-kernel, linux-kernel, devicetree, linux-gpio,
linux-serial
In-Reply-To: <1428080481-18591-1-git-send-email-mcoquelin.stm32@gmail.com>
This adds documentation of device tree bindings for the
ARM System timer.
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
---
.../devicetree/bindings/arm/armv7m_systick.txt | 26 ++++++++++++++++++++++
1 file changed, 26 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/armv7m_systick.txt
diff --git a/Documentation/devicetree/bindings/arm/armv7m_systick.txt b/Documentation/devicetree/bindings/arm/armv7m_systick.txt
new file mode 100644
index 0000000..7cf4a24
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/armv7m_systick.txt
@@ -0,0 +1,26 @@
+* ARMv7M System Timer
+
+ARMv7-M includes a system timer, known as SysTick. Current driver only
+implements the clocksource feature.
+
+Required properties:
+- compatible : Should be "arm,armv7m-systick"
+- reg : The address range of the timer
+
+Required clocking property, have to be one of:
+- clocks : The input clock of the timer
+- clock-frequency : The rate in HZ in input of the ARM SysTick
+
+Examples:
+
+systick: timer@e000e010 {
+ compatible = "arm,armv7m-systick";
+ reg = <0xe000e010 0x10>;
+ clocks = <&clk_systick>;
+};
+
+systick: timer@e000e010 {
+ compatible = "arm,armv7m-systick";
+ reg = <0xe000e010 0x10>;
+ clock-frequency = <90000000>;
+};
--
1.9.1
^ permalink raw reply related
* [PATCH v5 02/15] ARM: ARMv7-M: Enlarge vector table up to 256 entries
From: Maxime Coquelin @ 2015-04-03 17:01 UTC (permalink / raw)
To: u.kleine-koenig, afaerber, geert, Rob Herring, Philipp Zabel,
Linus Walleij, Arnd Bergmann, stefan, pmeerw, pebolle, peter,
andy.shevchenko, cw00.choi, Russell King, Daniel Lezcano
Cc: Jonathan Corbet, Pawel Moll, Mark Rutland, Ian Campbell,
Kumar Gala, Thomas Gleixner, Greg Kroah-Hartman, Jiri Slaby,
Andrew Morton, David S. Miller, Mauro Carvalho Chehab,
Joe Perches, Antti Palosaari, Tejun Heo, Will Deacon,
Nikolay Borisov, Rusty Russell, Kees Cook, Michal Marek,
linux-doc, linux-arm-kernel, linux-kernel, devicetree, linux-gpio,
linux-serial
In-Reply-To: <1428080481-18591-1-git-send-email-mcoquelin.stm32@gmail.com>
From Cortex-M reference manuals, the nvic supports up to 240 interrupts.
So the number of entries in vectors table is up to 256.
This patch adds a new config flag to specify the number of external interrupts.
Some ifdeferies are added in order to respect the natural alignment without
wasting too much space on smaller systems.
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Stefan Agner <stefan@agner.ch>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
---
arch/arm/kernel/entry-v7m.S | 13 +++++++++----
arch/arm/mm/Kconfig | 15 +++++++++++++++
2 files changed, 24 insertions(+), 4 deletions(-)
diff --git a/arch/arm/kernel/entry-v7m.S b/arch/arm/kernel/entry-v7m.S
index 8944f49..b6c8bb9 100644
--- a/arch/arm/kernel/entry-v7m.S
+++ b/arch/arm/kernel/entry-v7m.S
@@ -117,9 +117,14 @@ ENTRY(__switch_to)
ENDPROC(__switch_to)
.data
- .align 8
+#if CONFIG_CPU_V7M_NUM_IRQ <= 112
+ .align 9
+#else
+ .align 10
+#endif
+
/*
- * Vector table (64 words => 256 bytes natural alignment)
+ * Vector table (Natural alignment need to be ensured)
*/
ENTRY(vector_table)
.long 0 @ 0 - Reset stack pointer
@@ -138,6 +143,6 @@ ENTRY(vector_table)
.long __invalid_entry @ 13 - Reserved
.long __pendsv_entry @ 14 - PendSV
.long __invalid_entry @ 15 - SysTick
- .rept 64 - 16
- .long __irq_entry @ 16..64 - External Interrupts
+ .rept CONFIG_CPU_V7M_NUM_IRQ
+ .long __irq_entry @ External Interrupts
.endr
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 9b4f29e..aec53b4 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -604,6 +604,21 @@ config CPU_USE_DOMAINS
This option enables or disables the use of domain switching
via the set_fs() function.
+config CPU_V7M_NUM_IRQ
+ int "Number of external interrupts connected to the NVIC"
+ depends on CPU_V7M
+ default 90 if ARCH_STM32
+ default 38 if ARCH_EFM32
+ default 240
+ help
+ This option indicates the number of interrupts connected to the NVIC.
+ The value can be larger than the real number of interrupts supported
+ by the system, but must not be lower.
+ The default value is 240, corresponding to the maximum number of
+ interrupts supported by the NVIC on Cortex-M family.
+
+ If unsure, keep default value.
+
#
# CPU supports 36-bit I/O
#
--
1.9.1
^ permalink raw reply related
* [PATCH v5 01/15] scripts: link-vmlinux: Don't pass page offset to kallsyms if XIP Kernel
From: Maxime Coquelin @ 2015-04-03 17:01 UTC (permalink / raw)
To: u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ, afaerber-l3A5Bk7waGM,
geert-Td1EMuHUCqxL1ZNQvxDV9g, Rob Herring, Philipp Zabel,
Linus Walleij, Arnd Bergmann, stefan-XLVq0VzYD2Y,
pmeerw-jW+XmwGofnusTnJN9+BGXg, pebolle-IWqWACnzNjzz+pZb47iToQ,
peter-WaGBZJeGNqdsbIuE7sb01tBPR1lH4CV8,
andy.shevchenko-Re5JQEeQqe8AvxtiuMwx3w,
cw00.choi-Sze3O3UU22JBDgjK7y7TUQ, Russell King, Daniel Lezcano
Cc: Jonathan Corbet, Pawel Moll, Mark Rutland, Ian Campbell,
Kumar Gala, Thomas Gleixner, Greg Kroah-Hartman, Jiri Slaby,
Andrew Morton, David S. Miller, Mauro Carvalho Chehab,
Joe Perches, Antti Palosaari, Tejun Heo, Will Deacon,
Nikolay Borisov, Rusty Russell, Kees Cook, Michal Marek,
linux-doc-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-gpio-u79uwXL29TY76Z2rM5mHXA, linux-serial-fy+rA21nqHI
In-Reply-To: <1428080481-18591-1-git-send-email-mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
When Kernel is executed in place from ROM, the symbol addresses can be
lower than the page offset.
Tested-by: Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
scripts/link-vmlinux.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index 86a4fe7..b055d9d 100755
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -82,7 +82,7 @@ kallsyms()
kallsymopt="${kallsymopt} --all-symbols"
fi
- if [ -n "${CONFIG_ARM}" ] && [ -n "${CONFIG_PAGE_OFFSET}" ]; then
+ if [ -n "${CONFIG_ARM}" ] && [ -z "${CONFIG_XIP_KERNEL}" ] && [ -n "${CONFIG_PAGE_OFFSET}" ]; then
kallsymopt="${kallsymopt} --page-offset=$CONFIG_PAGE_OFFSET"
fi
--
1.9.1
^ permalink raw reply related
* [PATCH v5 00/15] Add support to STMicroelectronics STM32 family
From: Maxime Coquelin @ 2015-04-03 17:01 UTC (permalink / raw)
To: u.kleine-koenig, afaerber, geert, Rob Herring, Philipp Zabel,
Linus Walleij, Arnd Bergmann, stefan, pmeerw, pebolle, peter,
andy.shevchenko, cw00.choi, Russell King, Daniel Lezcano
Cc: Jonathan Corbet, Pawel Moll, Mark Rutland, Ian Campbell,
Kumar Gala, Thomas Gleixner, Greg Kroah-Hartman, Jiri Slaby,
Andrew Morton, David S. Miller, Mauro Carvalho Chehab,
Joe Perches, Antti Palosaari, Tejun Heo, Will Deacon,
Nikolay Borisov, Rusty Russell, Kees Cook, Michal Marek,
linux-doc, linux-arm-kernel, linux-kernel, devicetree, linux-gpio,
linux-serial
This fifth round only contains cosmetic fixes, and add some more Acks.
STM32 MCUs are Cortex-M CPU, used in various applications (consumer
electronics, industrial applications, hobbyists...).
Datasheets, user and programming manuals are publicly available on
STMicroelectronics website.
With this series applied, the STM32F419 Discovery can boot succesfully.
Changes since v4:
-----------------
- Cosmetic changes in USART driver (Andy)
- Apply Acks on reset driver & bindings (Philipp & Rob)
Changes since v3:
-----------------
- Fix and simplify error path in ARMv7-M Systick driver (Daniel)
- Improve reset bindings documentation (Philipp)
- Fix trailing lines anf typos in reset driver & doc (Philipp & Chanwoo)
- Fix MODULE_LICENCE in USART driver (Paul)
- Refactor USART baudrate calculation (Peter & Andy)
- Fix error path in USART init (Peter & Russell)
- Fix HW flow control in USART driver (Peter)
- Fix serial port type number to unused one (Peter)
- Applies Chanwoo's Tested-by on the series
Changes since v2:
-----------------
- Remove pinctrl driver from the series.
- Remove reset_controller_of_init(), and reset the timers in the bootloader
- Add HW flow contrl property for serial driver
- Lots of changes in the DTS file, as per Andreas recommendations
- Some Kconfig clean-ups
- Adapt the config to be compatible with Andreas' bootwrapper, except UART port.
- Various fixes in documentation
Changes since v1:
-----------------
- Move bindings documentation in their own patches (Andreas)
- Rename ARM System timer to armv7m-systick (Rob)
- Add clock-frequency property handling in armv7m-systick (Rob)
- Re-factor the reset controllers into a single controller (Philipp)
- Add kerneldoc to reset_controller_of_init (Philipp)
- Add named constants in include/dt-bindings/reset/ (Philipp)
- Make pinctrl driver to depend on ARCH_STM32 or COMPILE_TEST (Geert)
- Introduce CPUV7M_NUM_IRQ config flag to indicate the number of interrupts
supported by the MCU, in order to limit memory waste in vectors' table (Uwe)
Maxime Coquelin (15):
scripts: link-vmlinux: Don't pass page offset to kallsyms if XIP
Kernel
ARM: ARMv7-M: Enlarge vector table up to 256 entries
dt-bindings: Document the ARM System timer bindings
clocksource/drivers: Add ARM System timer driver
dt-bindings: Document the STM32 reset bindings
drivers: reset: Add STM32 reset driver
dt-bindings: Document the STM32 timer bindings
clockevents/drivers: Add STM32 Timer driver
dt-bindings: Document the STM32 USART bindings
serial: stm32-usart: Add STM32 USART Driver
ARM: Add STM32 family machine
ARM: dts: Add ARM System timer as clockevent in armv7m
ARM: dts: Introduce STM32F429 MCU
ARM: configs: Add STM32 defconfig
MAINTAINERS: Add entry for STM32 MCUs
Documentation/arm/stm32/overview.txt | 32 +
Documentation/arm/stm32/stm32f429-overview.txt | 22 +
.../devicetree/bindings/arm/armv7m_systick.txt | 26 +
.../devicetree/bindings/reset/st,stm32-rcc.txt | 107 +++
.../devicetree/bindings/serial/st,stm32-usart.txt | 32 +
.../devicetree/bindings/timer/st,stm32-timer.txt | 22 +
MAINTAINERS | 8 +
arch/arm/Kconfig | 18 +
arch/arm/Makefile | 1 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/armv7-m.dtsi | 6 +
arch/arm/boot/dts/stm32f429-disco.dts | 71 ++
arch/arm/boot/dts/stm32f429.dtsi | 226 +++++++
arch/arm/configs/stm32_defconfig | 71 ++
arch/arm/kernel/entry-v7m.S | 13 +-
arch/arm/mach-stm32/Makefile | 1 +
arch/arm/mach-stm32/Makefile.boot | 3 +
arch/arm/mach-stm32/board-dt.c | 19 +
arch/arm/mm/Kconfig | 15 +
drivers/clocksource/Kconfig | 15 +
drivers/clocksource/Makefile | 2 +
drivers/clocksource/armv7m_systick.c | 79 +++
drivers/clocksource/timer-stm32.c | 184 ++++++
drivers/reset/Makefile | 1 +
drivers/reset/reset-stm32.c | 124 ++++
drivers/tty/serial/Kconfig | 17 +
drivers/tty/serial/Makefile | 1 +
drivers/tty/serial/stm32-usart.c | 736 +++++++++++++++++++++
include/uapi/linux/serial_core.h | 3 +
scripts/link-vmlinux.sh | 2 +-
30 files changed, 1853 insertions(+), 5 deletions(-)
create mode 100644 Documentation/arm/stm32/overview.txt
create mode 100644 Documentation/arm/stm32/stm32f429-overview.txt
create mode 100644 Documentation/devicetree/bindings/arm/armv7m_systick.txt
create mode 100644 Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
create mode 100644 Documentation/devicetree/bindings/serial/st,stm32-usart.txt
create mode 100644 Documentation/devicetree/bindings/timer/st,stm32-timer.txt
create mode 100644 arch/arm/boot/dts/stm32f429-disco.dts
create mode 100644 arch/arm/boot/dts/stm32f429.dtsi
create mode 100644 arch/arm/configs/stm32_defconfig
create mode 100644 arch/arm/mach-stm32/Makefile
create mode 100644 arch/arm/mach-stm32/Makefile.boot
create mode 100644 arch/arm/mach-stm32/board-dt.c
create mode 100644 drivers/clocksource/armv7m_systick.c
create mode 100644 drivers/clocksource/timer-stm32.c
create mode 100644 drivers/reset/reset-stm32.c
create mode 100644 drivers/tty/serial/stm32-usart.c
--
1.9.1
^ permalink raw reply
* Re: [PATCH 0/5] Enhancements to twl4030 phy to support better charging - V2
From: Kishon Vijay Abraham I @ 2015-04-03 13:38 UTC (permalink / raw)
To: NeilBrown
Cc: NeilBrown, Tony Lindgren, linux-api-u79uwXL29TY76Z2rM5mHXA,
GTA04 owners, linux-kernel-u79uwXL29TY76Z2rM5mHXA, Pavel Machek,
cw00.choi-Sze3O3UU22JBDgjK7y7TUQ,
myungjoo.ham-Sze3O3UU22JBDgjK7y7TUQ
In-Reply-To: <20150401154102.5f57ec1e-wvvUuzkyo1EYVZTmpyfIwg@public.gmane.org>
+Extcon MAINTAINERS
Hi,
On Wednesday 01 April 2015 10:11 AM, NeilBrown wrote:
> On Thu, 26 Mar 2015 05:29:42 +0530 Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
> wrote:
>
>> Hi NeilBrown,
>>
>> On Thursday 26 March 2015 02:52 AM, NeilBrown wrote:
>>> On Thu, 26 Mar 2015 02:46:32 +0530 Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
>>> wrote:
>>>
>>>> Hi,
>>>>
>>>> On Monday 23 March 2015 04:05 AM, NeilBrown wrote:
>>>>> Hi Kishon,
>>>>> I wonder if you could queue the following for the next merge window.
>>>>> They allow the twl4030 phy to provide more information to the
>>>>> twl4030 battery charger.
>>>>> There are only minimal changes since the first version, particularly
>>>>> documentation has been improved.
>>>>
>>>> There are quite a few things in this series which use the USB PHY library
>>>> interface which is kindof deprecated. We should try and use the Generic PHY
>>>> library for all of them. It would also be better to add features to the
>>>> PHY framework if the we can't achieve something with the existing PHY
>>>> framework.
>>>
>>> Hi,
>>> are you able to more specific at all? What is the "USB PHY library"?
>>> Where exactly is the "PHY framework"?
>>
>> There is a USB PHY library that exists in drivers/usb/phy/phy.c and there is
>> a Generic PHY framework that is present in drivers/phy/phy-core.c. twl4030
>> actually supports both the framework.
>>
>> In your patch whatever uses struct usb_phy uses the old USB PHY library and
>> whatever uses struct phy uses the generic PHY framework. (Actually your patch
>> does not use the PHY framework at all). We want to deprecate using the USB PHY
>> library and make everyone use the generic PHY framework. Adding features
>> to a driver using the USB PHY library will make the transition to generic PHY
>> framework a bit more difficult.
>>
>> Now all the features that is supported in the USB PHY library may not be
>> supported by the PHY framework. So we should start extending the PHY framework
>> instead of using the USB PHY library.
>>
>> One think I noticed in your driver is using atomic notifier chain. IMO extcon
>> framework should be used in twl4030 USB driver to notify the controller driver
>> instead of using USB PHY notifier. For all other things we have to see if it
>> can be added in the PHY framework.
>
> I've had a look at the code with these issues in mind, and there is one issue
> that I'm not sure about.
>
> In phy-twl4030-usb, the usb_phy is used to hold a reference to the
> 'struct otg', and for passing cable state changes to the notifier.
right now we directly call omap_musb_mailbox no? we don't use notifiers right?
>
> The former probably has to stay until musb can keep a reference to the otg,
> separate form the usb_phy. The latter can be changed to use extcon - to
> some extent. I actually have patches to do that from a couple of years back,
> but I never proceeded with them.
>
> The problem is that one thing that needs to be communicated to the charger is
> the max current that was negotiated by a "Standard Downstream Port".
> This could be 500mA from a powered hum, or much less from an unpowered hub.
> (Currently the usb gadget code does negotiated between different
> possibilities, but it could and hopefully will one day).
>
> With the notifier chain there is an easy way to communicate the allowed
> current once it is negotiated. e.g. ab8500_usb_set_power() does this.
>
> 'struct phy' has no equivalent of the 'set_power' callback which 'struct
> usb_phy' provides, and extcon has no mechanism (that I can see) for
> communicating a number - just binary cable states.
Chanwoo Choi, Can this be modified so that we can communicate numbers like in
the case of EXTCON_CHARGE_DOWNSTREAM?
>
> Presumably a 'set_power' method could be added to 'struct phy' so the
> usb-core can communicate the number to the phy, but it is not clear to me how
> the 'phy' can communicate it to the charger.
Should the PHY be involved in all this? We can make the gadget driver
directly communicate the value to the charger no?
> The 'phy' could provide an API to request the current negotiated max current,
> but there still needs to be a way to let the charger know that this has
> changed.
> That could in theory be done via extcon, by having a secondary
> 'USB_connected' cable type, but it isn't really a cable type and pretending
> that it is seems wrong.
I think EXTCON_CHARGE_DOWNSTREAM was created for that purpose. Chanwoo?
Thanks
Kishon
^ permalink raw reply
* Re: [PATCH] audit.h: remove the macro AUDIT_ARCH_ARMEB definition
From: Steve Grubb @ 2015-04-03 12:42 UTC (permalink / raw)
To: linux-audit; +Cc: roy.qing.li, linux-api
In-Reply-To: <CAHC9VhR5VcaCtLG9hdVS2gZRWxVmdnpbK+fJwm6wCA8qyLebUQ@mail.gmail.com>
On Friday, March 20, 2015 09:29:14 AM Paul Moore wrote:
> On Fri, Mar 20, 2015 at 12:55 AM, <roy.qing.li@gmail.com> wrote:
> > From: Li RongQing <roy.qing.li@gmail.com>
> >
> > After 2f9783669 [ARM: 7412/1: audit: use only AUDIT_ARCH_ARM regardless
> > of endianness], no kernel user uses this macro;
> >
> > Keeping this macro, only makes the compiling old version audit [before
> > changeset 931 Improve ARM and AARCH64 support] success, but the audit
> > program can not work with the kernel after 2f9783669 still,
> > since no syscall entry is enabled for AUDIT_ARCH_ARMEB in kernel.
> >
> > so remove it to force to use the latest audit program
> >
> > Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
> > ---
> > other workaround is to define AUDIT_ARCH_ARMEB as AUDIT_ARCH_ARM,
> > but it seems very strange
> >
> > include/uapi/linux/audit.h | 1 -
> > 1 file changed, 1 deletion(-)
>
> Since this #define lives in the user visible headers I don't want to
> remove it and risk causing a userspace breakage. Leaving the #define
> in the header, even if it is unused by modern userspace, is harmless.
This macro doesn't appear to be in use by auditd.
-Steve
> > diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h
> > index d3475e1..125aa49 100644
> > --- a/include/uapi/linux/audit.h
> > +++ b/include/uapi/linux/audit.h
> > @@ -351,7 +351,6 @@ enum {
> >
> > #define AUDIT_ARCH_AARCH64
> > (EM_AARCH64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) #define AUDIT_ARCH_ALPHA
> > (EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) #define
> > AUDIT_ARCH_ARM (EM_ARM|__AUDIT_ARCH_LE)
> >
> > -#define AUDIT_ARCH_ARMEB (EM_ARM)
> >
> > #define AUDIT_ARCH_CRIS (EM_CRIS|__AUDIT_ARCH_LE)
> > #define AUDIT_ARCH_FRV (EM_FRV)
> > #define AUDIT_ARCH_I386 (EM_386|__AUDIT_ARCH_LE)
> >
> > --
> > 2.1.0
^ permalink raw reply
* Re: [PATCH v4 00/14] Add kdbus implementation
From: David Herrmann @ 2015-04-03 11:51 UTC (permalink / raw)
To: Andy Lutomirski
Cc: Tom Gundersen, Greg Kroah-Hartman, Arnd Bergmann,
Eric W. Biederman, One Thousand Gnomes, Jiri Kosina, Linux API,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Daniel Mack,
Djalal Harouni
In-Reply-To: <CALCETrX3vDZsymwC=LK=oK0=QLZqyB2Nv4N8jcjsx2yp1rjBvg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
Hi
On Tue, Mar 31, 2015 at 8:29 PM, Andy Lutomirski <luto-kltTT9wpgjJwATOyAt5JVQ@public.gmane.org> wrote:
> On Tue, Mar 31, 2015 at 8:10 AM, Tom Gundersen <teg-B22kvLQNl6c@public.gmane.org> wrote:
>> On Tue, Mar 31, 2015 at 3:58 PM, Andy Lutomirski <luto-kltTT9wpgjJwATOyAt5JVQ@public.gmane.org> wrote:
>>>
>>> IOW you're taking something that you dislike aspects of and shoving
>>> most of it in the kernel. That guarantees us an API in the kernel
>>> that even the creators don't really like. This is, IMO, very
>>> unfortunate.
>>
>> This is a misrepresentation of what David wrote. We do want this API
>> regardless of dbus1 compatibility, but compatibility is by itself a
>> sufficient motivation. A further motivation is reliable introspection,
>> since this meta-data allows listing current peers on the bus and
>> showing their identities. That's hugely useful to make the bus
>> transparent to admins.
>
> I've heard the following use cases for per-connection metadata:
>
> - Authenticating to dbus1 services.
Not necessarily authentication, but we need to support the legacy API,
for whatever reason it was used by old applications. But..
> - Identifying connected users for admin diagnostics.
>
> I've heard the following use cases for per-message metadata:
>
> - Logging.
>
> - Authenticating to kdbus services that want this style of authentication.
..please note that authentication on DBus has always been done with
per-message metadata (see polkit history). However, this had to be
reverted some years ago as it is racy (it used /proc for that, which
can be exploited by exec'ing setuid binaries). However, the
per-message metadata authentication worked very well for _years_
(minus the race..), so this is already a well-established scheme. With
kdbus we can finally implement this in a race-free manner.
[...]
> This is simply not okay for a modern interface, and in my opinion the
> kernel should not carry code to support new APIs with weakly defined
> security semantics. It's important that one be able to tell what the
> security implications of one's code is without cross-referencing with
> the implementation of the server's you're interacting with.
Again, I disagree. Our concepts are established and used on UDS and
DBus for decades.
Yes, we provide two ways to retrieve metadata, but the kernel offers
several more paths to gather that information. Just because those APIs
are available does not mean they should be used for authentication. We
mandate per-message metadata. If applications use per-connection
metadata, /proc, netlink, or random data, they're doing it wrong.
Furthermore, dbus provides pretty complete and straightforward
libraries which hide that from you. If you use glib, qt or sd-bus, you
don't even need to deal with all that.
> To top that off, the kdbus policy mechanism has truly bizarre effects
> with respect to services that have unique ids and well-known names.
> That, too, is apparently for compatibility.
>
> This all feels to me like a total of about four people are going to
> understand the tangle that is kdbus security, and that's bad. I think
> that the kernel should insist that new security-critical mechanisms
> make sense and be hard to misuse. The current design of kdbus, in
> contrast, feel like it will be very hard to use correctly.
Native kdbus clients are authenticated with their credentials at time
of method call. Legacy clients will always have their credentials at
time of connect in effect. No fallbacks, no choices. It's a simple
question whether it's a legacy client or not.
Sounds simple to me.
Thanks
David
^ permalink raw reply
* Re: [Patch 2/3] firmware: dmi_scan: add SBMIOS entry and DMI tables
From: Ivan.khoronzhuk @ 2015-04-03 9:36 UTC (permalink / raw)
To: linux-kernel, matt.fleming, jdelvare, ard.biesheuvel,
grant.likely, linux-api, linux-doc, mikew
Cc: dmidecode-devel, leif.lindholm, msalter, roy.franz
In-Reply-To: <1427979423-22767-3-git-send-email-ivan.khoronzhuk@globallogic.com>
On 02.04.15 15:57, Ivan Khoronzhuk wrote:
> Some utils, like dmidecode and smbios, need to access SMBIOS entry
> table area in order to get information like SMBIOS version, size, etc.
> Currently it's done via /dev/mem. But for situation when /dev/mem
> usage is disabled, the utils have to use dmi sysfs instead, which
> doesn't represent SMBIOS entry and adds code/delay redundancy when direct
> access for table is needed.
>
> So this patch creates dmi/tables and adds SMBIOS entry point to allow
> utils in question to work correctly without /dev/mem. Also patch adds
> raw dmi table to simplify dmi table processing in user space, as
> proposed by Jean Delvare.
>
> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@globallogic.com>
> ---
> .../ABI/testing/sysfs-firmware-dmi-tables | 22 ++++++
> drivers/firmware/dmi-sysfs.c | 11 ++-
> drivers/firmware/dmi_scan.c | 80 ++++++++++++++++++++++
> include/linux/dmi.h | 1 +
> 4 files changed, 107 insertions(+), 7 deletions(-)
> create mode 100644 Documentation/ABI/testing/sysfs-firmware-dmi-tables
>
> diff --git a/Documentation/ABI/testing/sysfs-firmware-dmi-tables b/Documentation/ABI/testing/sysfs-firmware-dmi-tables
> new file mode 100644
> index 0000000..f46158c
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-firmware-dmi-tables
> @@ -0,0 +1,22 @@
> +What: /sys/firmware/dmi/tables/
> +Date: April 2015
> +Contact: Ivan Khoronzhuk <ivan.khoronzhuk@globallogic.com>
> +Description:
> + The firmware provides DMI structures as a packed list of
> + data referenced by a SMBIOS table entry point. The SMBIOS
> + entry point contains general information, like SMBIOS
> + version, DMI table size, etc. The structure, content and
> + size of SMBIOS entry point is dependent on SMBIOS version.
> + The format of SMBIOS entry point, equal as DMI structures
> + can be read in SMBIOS specification.
> +
> + The dmi/tables provides raw SMBIOS entry point and DMI tables
> + through sysfs as an alternative to utilities reading them
> + from /dev/mem. The raw SMBIOS entry point and DMI table are
> + presented as raw attributes and are accessible via:
> +
> + /sys/firmware/dmi/tables/smbios_entry_point
> + /sys/firmware/dmi/tables/DMI
> +
> + The complete DMI information can be taken using these two
> + tables.
> diff --git a/drivers/firmware/dmi-sysfs.c b/drivers/firmware/dmi-sysfs.c
> index e0f1cb3..8e1a411 100644
> --- a/drivers/firmware/dmi-sysfs.c
> +++ b/drivers/firmware/dmi-sysfs.c
> @@ -566,7 +566,6 @@ static struct kobj_type dmi_sysfs_entry_ktype = {
> .default_attrs = dmi_sysfs_entry_attrs,
> };
>
> -static struct kobject *dmi_kobj;
> static struct kset *dmi_kset;
>
> /* Global count of all instances seen. Only for setup */
> @@ -651,10 +650,11 @@ static int __init dmi_sysfs_init(void)
> int error = -ENOMEM;
> int val;
>
> - /* Set up our directory */
> - dmi_kobj = kobject_create_and_add("dmi", firmware_kobj);
> - if (!dmi_kobj)
> + if (!dmi_kobj) {
> + pr_err("dmi-sysfs: dmi entry is absent.\n");
> + error = -ENOSYS;
> goto err;
> + }
>
> dmi_kset = kset_create_and_add("entries", NULL, dmi_kobj);
> if (!dmi_kset)
> @@ -675,7 +675,6 @@ static int __init dmi_sysfs_init(void)
> err:
> cleanup_entry_list();
> kset_unregister(dmi_kset);
> - kobject_put(dmi_kobj);
> return error;
> }
>
> @@ -685,8 +684,6 @@ static void __exit dmi_sysfs_exit(void)
> pr_debug("dmi-sysfs: unloading.\n");
> cleanup_entry_list();
> kset_unregister(dmi_kset);
> - kobject_del(dmi_kobj);
> - kobject_put(dmi_kobj);
> }
>
> module_init(dmi_sysfs_init);
> diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
> index d3aae09..bb19f8b 100644
> --- a/drivers/firmware/dmi_scan.c
> +++ b/drivers/firmware/dmi_scan.c
> @@ -10,6 +10,9 @@
> #include <asm/dmi.h>
> #include <asm/unaligned.h>
>
> +struct kobject *dmi_kobj;
> +EXPORT_SYMBOL_GPL(dmi_kobj);
> +
> /*
> * DMI stands for "Desktop Management Interface". It is part
> * of and an antecedent to, SMBIOS, which stands for System
> @@ -20,6 +23,9 @@ static const char dmi_empty_string[] = " ";
> static u32 dmi_ver __initdata;
> static u32 dmi_len;
> static u16 dmi_num;
> +static u8 smbios_entry_point[32];
> +static int smbios_entry_point_size;
> +
> /*
> * Catch too early calls to dmi_check_system():
> */
> @@ -118,6 +124,7 @@ static void dmi_decode_table(u8 *buf,
> }
>
> static phys_addr_t dmi_base;
> +static u8 *dmi_table;
>
> static int __init dmi_walk_early(void (*decode)(const struct dmi_header *,
> void *))
> @@ -476,6 +483,8 @@ static int __init dmi_present(const u8 *buf)
> if (memcmp(buf, "_SM_", 4) == 0 &&
> buf[5] < 32 && dmi_checksum(buf, buf[5])) {
> smbios_ver = get_unaligned_be16(buf + 6);
> + smbios_entry_point_size = buf[5];
> + memcpy(smbios_entry_point, buf, smbios_entry_point_size);
>
> /* Some BIOS report weird SMBIOS version, fix that up */
> switch (smbios_ver) {
> @@ -508,6 +517,9 @@ static int __init dmi_present(const u8 *buf)
> dmi_ver >> 8, dmi_ver & 0xFF,
> (dmi_ver < 0x0300) ? "" : ".x");
> } else {
> + smbios_entry_point_size = 15;
> + memcpy(smbios_entry_point, buf,
> + smbios_entry_point_size);
> dmi_ver = (buf[14] & 0xF0) << 4 |
> (buf[14] & 0x0F);
> pr_info("Legacy DMI %d.%d present.\n",
> @@ -535,6 +547,8 @@ static int __init dmi_smbios3_present(const u8 *buf)
> dmi_ver &= 0xFFFFFF;
> dmi_len = get_unaligned_le32(buf + 12);
> dmi_base = get_unaligned_le64(buf + 16);
> + smbios_entry_point_size = buf[6];
> + memcpy(smbios_entry_point, buf, smbios_entry_point_size);
>
> /*
> * The 64-bit SMBIOS 3.0 entry point no longer has a field
> @@ -638,6 +652,72 @@ void __init dmi_scan_machine(void)
> dmi_initialized = 1;
> }
>
> +static ssize_t raw_table_read(struct file *file, struct kobject *kobj,
> + struct bin_attribute *attr, char *buf,
> + loff_t pos, size_t count)
> +{
> + memcpy(buf, attr->private + pos, count);
> + return count;
> +}
> +
> +static BIN_ATTR(smbios_entry_point, S_IRUSR, raw_table_read, NULL, 0);
> +struct bin_attribute bin_attr_dmi_table =
> + __BIN_ATTR(DMI, S_IRUSR, raw_table_read, NULL, 0);
missed static here
> +
> +static int __init dmi_init(void)
> +{
> + int ret = -ENOMEM;
> + struct kobject *tables_kobj = NULL;
> +
> + if (!dmi_available) {
> + ret = -ENOSYS;
> + goto err;
> + }
> +
> + /* Set up dmi directory at /sys/firmware/dmi */
> + dmi_kobj = kobject_create_and_add("dmi", firmware_kobj);
> + if (!dmi_kobj)
> + goto err;
> +
> + tables_kobj = kobject_create_and_add("tables", dmi_kobj);
> + if (!tables_kobj)
> + goto err;
> +
> + bin_attr_smbios_entry_point.size = smbios_entry_point_size;
> + bin_attr_smbios_entry_point.private = smbios_entry_point;
> + ret = sysfs_create_bin_file(tables_kobj, &bin_attr_smbios_entry_point);
> + if (ret)
> + goto err;
> +
> + dmi_table = dmi_remap(dmi_base, dmi_len);
> + if (!dmi_table)
> + goto err;
> +
> + bin_attr_dmi_table.size = dmi_len;
> + bin_attr_dmi_table.private = dmi_table;
> + ret = sysfs_create_bin_file(tables_kobj, &bin_attr_dmi_table);
> + if (ret) {
> + dmi_unmap(dmi_table);
> + goto err;
> + }
> +
> + return 0;
> +err:
> + pr_err("dmi: Firmware registration failed.\n");
> +
> + if (tables_kobj)
> + sysfs_remove_bin_file(tables_kobj,
> + &bin_attr_smbios_entry_point);
> + kobject_del(tables_kobj);
> + kobject_put(tables_kobj);
> + kobject_del(dmi_kobj);
> + kobject_put(dmi_kobj);
> + dmi_kobj = NULL;
> +
> + return ret;
> +}
> +subsys_initcall(dmi_init);
> +
> /**
> * dmi_set_dump_stack_arch_desc - set arch description for dump_stack()
> *
> diff --git a/include/linux/dmi.h b/include/linux/dmi.h
> index f820f0a..9f55f46 100644
> --- a/include/linux/dmi.h
> +++ b/include/linux/dmi.h
> @@ -93,6 +93,7 @@ struct dmi_dev_onboard {
> int devfn;
> };
>
> +extern struct kobject *dmi_kobj;
> extern int dmi_check_system(const struct dmi_system_id *list);
> const struct dmi_system_id *dmi_first_match(const struct dmi_system_id *list);
> extern const char * dmi_get_system_info(int field);
--
Regards,
Ivan Khoronzhuk
^ permalink raw reply
* Re: [Patch] firmware: dmi_scan: split dmisubsystem from dmi-sysfs
From: Ivan.khoronzhuk @ 2015-04-03 7:21 UTC (permalink / raw)
To: Jean Delvare
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
matt.fleming-ral2JQCrhuEAvxtiuMwx3w,
ard.biesheuvel-QSEj5FYQhm4dnm+yROfE0A,
grant.likely-QSEj5FYQhm4dnm+yROfE0A,
linux-api-u79uwXL29TY76Z2rM5mHXA,
linux-doc-u79uwXL29TY76Z2rM5mHXA, mikew-hpIqsD4AKlfQT0dZR+AlfA,
dmidecode-devel-qX2TKyscuCcdnm+yROfE0A,
leif.lindholm-QSEj5FYQhm4dnm+yROfE0A,
msalter-H+wXaHxf7aLQT0dZR+AlfA,
roy.franz-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org
In-Reply-To: <1427987302.4281.309.camel-H7Kp9ZFCxt/N0uC3ymp8PA@public.gmane.org>
+ Roy
On 02.04.15 18:08, Jean Delvare wrote:
> Le Thursday 02 April 2015 à 16:02 +0300, Ivan.khoronzhuk a écrit :
>> Hi Jean,
>> Sorry for the late reply.
>> I've send new series
>> "[Patch 0/3] firmware: dmi_scan: add SBMIOS entry point and DMI tables"
>> with all last propositions.
> Thanks Ivan, no problem. I'll look at it when I have time.
>
> Two related notes:
>
> * On week from April 13th to 17th, this is Hack Week 12 at SUSE. This
> time I decided to work on dmidecode. I plan to add full support for
> SMBIOS 3.0.0, including the new entry point format. Then I'll work on
> integrating your work (the sysfs interface.) Project page:
>
> https://hackweek.suse.com/12/projects/766
>
> If you or anyone else want to participate, you are very welcome. Ideally
> we would release dmidecode 2.13 at the end of that week.
>
> * Do you know of any hardware already implementing SMBIOS 3.0 (either
> the new entry point format, or the new enumerated values, or both)?
> Having a real-world example would make testing much easier.
>
> Thanks,
--
Regards,
Ivan Khoronzhuk
^ permalink raw reply
* [PATCH v2] selftests/mount: output WARN messages when mount test skipped
From: Zhang Zhen @ 2015-04-03 1:39 UTC (permalink / raw)
To: linux-api,
linux-kernel@vger.kernel.org >> Linux Kernel Mailing List
Cc: Eric W. Biederman, shuahkh
In-Reply-To: <1428024818-28554-1-git-send-email-zhenzhang.zhang@huawei.com>
Without this patch, if /proc/self/uid_map is not exist,
the mount test case will skipped and no any prompting.
After applied this patch, the case will prompt why it skipped.
Just as follows:
root@kernel-host:/opt/kernel> make -C tools/testing/selftests TARGETS=mount run_tests
make: Entering directory `/opt/kernel/tools/testing/selftests'
for TARGET in mount; do \
make -C $TARGET; \
done;
make[1]: Entering directory `/opt/kernel/tools/testing/selftests/mount'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/opt/kernel/tools/testing/selftests/mount'
for TARGET in mount; do \
make -C $TARGET run_tests; \
done;
make[1]: Entering directory `/opt/kernel/tools/testing/selftests/mount'
if [ -f /proc/self/uid_map ] ; then ./unprivileged-remount-test ; else echo "WARN: No /proc/self/uid_map exist, test skipped." ; fi
WARN: No /proc/self/uid_map exist, test skipped.
make[1]: Leaving directory `/opt/kernel/tools/testing/selftests/mount'
make: Leaving directory `/opt/kernel/tools/testing/selftests'
Change v1 -> v2:
- fix syntax error when run kselftest_install.sh
Signed-off-by: Zhang Zhen <zhenzhang.zhang@huawei.com>
---
tools/testing/selftests/mount/Makefile | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/mount/Makefile b/tools/testing/selftests/mount/Makefile
index a5b367f..038c777 100644
--- a/tools/testing/selftests/mount/Makefile
+++ b/tools/testing/selftests/mount/Makefile
@@ -8,7 +8,12 @@ unprivileged-remount-test: unprivileged-remount-test.c
include ../lib.mk
TEST_PROGS := unprivileged-remount-test
-override RUN_TESTS := if [ -f /proc/self/uid_map ] ; then ./unprivileged-remount-test ; fi
+override RUN_TESTS := if [ -f /proc/self/uid_map ] ; \
+ then \
+ ./unprivileged-remount-test ; \
+ else \
+ echo "WARN: No /proc/self/uid_map exist, test skipped." ; \
+ fi
override EMIT_TESTS := echo "$(RUN_TESTS)"
clean:
--
1.8.5.5
.
^ permalink raw reply related
* [PATCH v3 3/3] Documentation/ABI: Update sysfs-driver-toshiba_acpi entry
From: Azael Avalos @ 2015-04-03 1:28 UTC (permalink / raw)
To: Darren Hart, platform-driver-x86, linux-kernel, linux-api; +Cc: Azael Avalos
This patch updates the sysfs-driver-toshiba_acpi entry, adding the
missing entries for USB Sleep functions.
And also, while at the neighborhood, fix some typos and add a note
that some features require a reboot.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
---
.../ABI/testing/sysfs-driver-toshiba_acpi | 93 +++++++++++++++++++---
1 file changed, 80 insertions(+), 13 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-driver-toshiba_acpi b/Documentation/ABI/testing/sysfs-driver-toshiba_acpi
index ca9c71a..eed922e 100644
--- a/Documentation/ABI/testing/sysfs-driver-toshiba_acpi
+++ b/Documentation/ABI/testing/sysfs-driver-toshiba_acpi
@@ -8,9 +8,11 @@ Description: This file controls the keyboard backlight operation mode, valid
* 0x2 -> AUTO (also called TIMER)
* 0x8 -> ON
* 0x10 -> OFF
- Note that the kernel 3.16 onwards this file accepts all listed
+ Note that from kernel 3.16 onwards this file accepts all listed
parameters, kernel 3.15 only accepts the first two (FN-Z and
AUTO).
+ Also note that toggling this value on type 1 devices, requires
+ a reboot for changes to take effect.
Users: KToshiba
What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/kbd_backlight_timeout
@@ -67,15 +69,72 @@ Description: This file shows the current keyboard backlight type,
* 2 -> Type 2, supporting modes TIMER, ON and OFF
Users: KToshiba
+What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/usb_sleep_charge
+Date: January 23, 2015
+KernelVersion: 4.0
+Contact: Azael Avalos <coproscefalo@gmail.com>
+Description: This file controls the USB Sleep & Charge charging mode, which
+ can be:
+ * 0 -> Disabled (0x00)
+ * 1 -> Alternate (0x09)
+ * 2 -> Auto (0x21)
+ * 3 -> Typical (0x11)
+ Note that from kernel 4.1 onwards this file accepts all listed
+ values, kernel 4.0 only supports the first three.
+ Note that this feature only works when connected to power, if
+ you want to use it under battery, see the entry named
+ "sleep_functions_on_battery"
+Users: KToshiba
+
+What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/sleep_functions_on_battery
+Date: January 23, 2015
+KernelVersion: 4.0
+Contact: Azael Avalos <coproscefalo@gmail.com>
+Description: This file controls the USB Sleep Functions under battery, and
+ set the level at which point they will be disabled, accepted
+ values can be:
+ * 0 -> Disabled
+ * 1-100 -> Battery level to disable sleep functions
+ Currently it prints two values, the first one indicates if the
+ feature is enabled or disabled, while the second one shows the
+ current battery level set.
+ Note that when the value is set to disabled, the sleep function
+ will only work when connected to power.
+Users: KToshiba
+
+What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/usb_rapid_charge
+Date: January 23, 2015
+KernelVersion: 4.0
+Contact: Azael Avalos <coproscefalo@gmail.com>
+Description: This file controls the USB Rapid Charge state, which can be:
+ * 0 -> Disabled
+ * 1 -> Enabled
+ Note that toggling this value requires a reboot for changes to
+ take effect.
+Users: KToshiba
+
+What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/usb_sleep_music
+Date: January 23, 2015
+KernelVersion: 4.0
+Contact: Azael Avalos <coproscefalo@gmail.com>
+Description: This file controls the Sleep & Music state, which values can be:
+ * 0 -> Disabled
+ * 1 -> Enabled
+ Note that this feature only works when connected to power, if
+ you want to use it under battery, see the entry named
+ "sleep_functions_on_battery"
+Users: KToshiba
+
What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/version
-Date: February, 2015
-KernelVersion: 3.20
+Date: February 12, 2015
+KernelVersion: 4.0
Contact: Azael Avalos <coproscefalo@gmail.com>
Description: This file shows the current version of the driver
+Users: KToshiba
What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/fan
-Date: February, 2015
-KernelVersion: 3.20
+Date: February 12, 2015
+KernelVersion: 4.0
Contact: Azael Avalos <coproscefalo@gmail.com>
Description: This file controls the state of the internal fan, valid
values are:
@@ -83,8 +142,8 @@ Description: This file controls the state of the internal fan, valid
* 1 -> ON
What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/kbd_function_keys
-Date: February, 2015
-KernelVersion: 3.20
+Date: February 12, 2015
+KernelVersion: 4.0
Contact: Azael Avalos <coproscefalo@gmail.com>
Description: This file controls the Special Functions (hotkeys) operation
mode, valid values are:
@@ -94,21 +153,29 @@ Description: This file controls the Special Functions (hotkeys) operation
and the hotkeys are accessed via FN-F{1-12}.
In the "Special Functions" mode, the F{1-12} keys trigger the
hotkey and the F{1-12} keys are accessed via FN-F{1-12}.
+ Note that toggling this value requires a reboot for changes to
+ take effect.
+Users: KToshiba
What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/panel_power_on
-Date: February, 2015
-KernelVersion: 3.20
+Date: February 12, 2015
+KernelVersion: 4.0
Contact: Azael Avalos <coproscefalo@gmail.com>
Description: This file controls whether the laptop should turn ON whenever
the LID is opened, valid values are:
* 0 -> Disabled
* 1 -> Enabled
+ Note that toggling this value requires a reboot for changes to
+ take effect.
+Users: KToshiba
What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/usb_three
-Date: February, 2015
-KernelVersion: 3.20
+Date: February 12, 2015
+KernelVersion: 4.0
Contact: Azael Avalos <coproscefalo@gmail.com>
-Description: This file controls whether the USB 3 functionality, valid
- values are:
+Description: This file controls the USB 3 functionality, valid values are:
* 0 -> Disabled (Acts as a regular USB 2)
* 1 -> Enabled (Full USB 3 functionality)
+ Note that toggling this value requires a reboot for changes to
+ take effect.
+Users: KToshiba
--
2.3.4
^ permalink raw reply related
* [PATCH v3 2/3] toshiba_acpi: Fix pr_* messages from USB Sleep Functions
From: Azael Avalos @ 2015-04-03 1:27 UTC (permalink / raw)
To: Darren Hart, platform-driver-x86, linux-kernel, linux-api; +Cc: Azael Avalos
This patch fixes the messages displayed by the USB Sleep Functions,
they were printing wrong messages not associated to the feature
currently queried.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
---
drivers/platform/x86/toshiba_acpi.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 37f5f64..f624dd5 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -965,11 +965,11 @@ static int toshiba_usb_rapid_charge_get(struct toshiba_acpi_dev *dev,
status = tci_raw(dev, in, out);
sci_close(dev);
if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
- pr_err("ACPI call to get USB S&C battery level failed\n");
+ pr_err("ACPI call to get USB Rapid Charge failed\n");
return -EIO;
} else if (out[0] == TOS_NOT_SUPPORTED ||
out[0] == TOS_INPUT_DATA_ERROR) {
- pr_info("USB Sleep and Charge not supported\n");
+ pr_info("USB Rapid Charge not supported\n");
return -ENODEV;
}
@@ -993,10 +993,10 @@ static int toshiba_usb_rapid_charge_set(struct toshiba_acpi_dev *dev,
status = tci_raw(dev, in, out);
sci_close(dev);
if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
- pr_err("ACPI call to set USB S&C battery level failed\n");
+ pr_err("ACPI call to set USB Rapid Charge failed\n");
return -EIO;
} else if (out[0] == TOS_NOT_SUPPORTED) {
- pr_info("USB Sleep and Charge not supported\n");
+ pr_info("USB Rapid Charge not supported\n");
return -ENODEV;
} else if (out[0] == TOS_INPUT_DATA_ERROR) {
return -EIO;
@@ -1015,10 +1015,10 @@ static int toshiba_usb_sleep_music_get(struct toshiba_acpi_dev *dev, u32 *state)
result = sci_read(dev, SCI_USB_SLEEP_MUSIC, state);
sci_close(dev);
if (result == TOS_FAILURE) {
- pr_err("ACPI call to set USB S&C mode failed\n");
+ pr_err("ACPI call to get Sleep and Music failed\n");
return -EIO;
} else if (result == TOS_NOT_SUPPORTED) {
- pr_info("USB Sleep and Charge not supported\n");
+ pr_info("Sleep and Music not supported\n");
return -ENODEV;
} else if (result == TOS_INPUT_DATA_ERROR) {
return -EIO;
@@ -1037,10 +1037,10 @@ static int toshiba_usb_sleep_music_set(struct toshiba_acpi_dev *dev, u32 state)
result = sci_write(dev, SCI_USB_SLEEP_MUSIC, state);
sci_close(dev);
if (result == TOS_FAILURE) {
- pr_err("ACPI call to set USB S&C mode failed\n");
+ pr_err("ACPI call to set Sleep and Music failed\n");
return -EIO;
} else if (result == TOS_NOT_SUPPORTED) {
- pr_info("USB Sleep and Charge not supported\n");
+ pr_info("Sleep and Music not supported\n");
return -ENODEV;
} else if (result == TOS_INPUT_DATA_ERROR) {
return -EIO;
--
2.3.4
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox