From: Yinghai Lu <yinghai@kernel.org>
To: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>,
Andrew Morton <akpm@linux-foundation.org>,
David Miller <davem@davemloft.net>,
Be
Cc: Linus Torvalds <torvalds@linux-foundation.org>,
Johannes Weiner <hannes@cmpxchg.org>,
linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org,
Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH 33/37] x86: Use wake_system_ram_range() instead of e820_any_mapped() in agp path
Date: Fri, 14 May 2010 12:45:59 -0700 [thread overview]
Message-ID: <1273866363-14249-34-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1273866363-14249-1-git-send-email-yinghai@kernel.org>
Move apterture_valid back to .c
and early path still use e820_any_mapped()
So later we can make e820_any_mapped() to _init
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/include/asm/gart.h | 22 ----------------------
arch/x86/kernel/aperture_64.c | 22 ++++++++++++++++++++++
drivers/char/agp/amd64-agp.c | 39 ++++++++++++++++++++++++++++++++++++++-
3 files changed, 60 insertions(+), 23 deletions(-)
diff --git a/arch/x86/include/asm/gart.h b/arch/x86/include/asm/gart.h
index 4ac5b0f..2b63a91 100644
--- a/arch/x86/include/asm/gart.h
+++ b/arch/x86/include/asm/gart.h
@@ -74,26 +74,4 @@ static inline void enable_gart_translation(struct pci_dev *dev, u64 addr)
pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl);
}
-static inline int aperture_valid(u64 aper_base, u32 aper_size, u32 min_size)
-{
- if (!aper_base)
- return 0;
-
- if (aper_base + aper_size > 0x100000000ULL) {
- printk(KERN_INFO "Aperture beyond 4GB. Ignoring.\n");
- return 0;
- }
- if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) {
- printk(KERN_INFO "Aperture pointing to e820 RAM. Ignoring.\n");
- return 0;
- }
- if (aper_size < min_size) {
- printk(KERN_INFO "Aperture too small (%d MB) than (%d MB)\n",
- aper_size>>20, min_size>>20);
- return 0;
- }
-
- return 1;
-}
-
#endif /* _ASM_X86_GART_H */
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index b5d8b0b..4755b5a 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -145,6 +145,28 @@ static u32 __init find_cap(int bus, int slot, int func, int cap)
return 0;
}
+static int __init aperture_valid(u64 aper_base, u32 aper_size, u32 min_size)
+{
+ if (!aper_base)
+ return 0;
+
+ if (aper_base + aper_size > 0x100000000ULL) {
+ printk(KERN_INFO "Aperture beyond 4GB. Ignoring.\n");
+ return 0;
+ }
+ if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) {
+ printk(KERN_INFO "Aperture pointing to e820 RAM. Ignoring.\n");
+ return 0;
+ }
+ if (aper_size < min_size) {
+ printk(KERN_INFO "Aperture too small (%d MB) than (%d MB)\n",
+ aper_size>>20, min_size>>20);
+ return 0;
+ }
+
+ return 1;
+}
+
/* Read a standard AGPv3 bridge header */
static u32 __init read_agp(int bus, int slot, int func, int cap, u32 *order)
{
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index fd50ead..85cabd0 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -14,7 +14,6 @@
#include <linux/agp_backend.h>
#include <linux/mmzone.h>
#include <asm/page.h> /* PAGE_SIZE */
-#include <asm/e820.h>
#include <asm/k8.h>
#include <asm/gart.h>
#include "agp.h"
@@ -231,6 +230,44 @@ static const struct agp_bridge_driver amd_8151_driver = {
.agp_type_to_mask_type = agp_generic_type_to_mask_type,
};
+static int __devinit
+__is_ram(unsigned long pfn, unsigned long nr_pages, void *arg)
+{
+ return 1;
+}
+
+static int __devinit any_ram_in_range(u64 base, u64 size)
+{
+ unsigned long pfn, nr_pages;
+
+ pfn = base >> PAGE_SHIFT;
+ nr_pages = size >> PAGE_SHIFT;
+
+ return walk_system_ram_range(pfn, nr_pages, NULL, __is_ram) == 1;
+}
+
+static int __devinit aperture_valid(u64 aper_base, u32 aper_size, u32 min_size)
+{
+ if (!aper_base)
+ return 0;
+
+ if (aper_base + aper_size > 0x100000000ULL) {
+ printk(KERN_INFO "Aperture beyond 4GB. Ignoring.\n");
+ return 0;
+ }
+ if (any_ram_in_range(aper_base, aper_size)) {
+ printk(KERN_INFO "Aperture pointing to E820 RAM. Ignoring.\n");
+ return 0;
+ }
+ if (aper_size < min_size) {
+ printk(KERN_INFO "Aperture too small (%d MB) than (%d MB)\n",
+ aper_size>>20, min_size>>20);
+ return 0;
+ }
+
+ return 1;
+}
+
/* Some basic sanity checks for the aperture. */
static int __devinit agp_aperture_valid(u64 aper, u32 size)
{
--
1.6.4.2
WARNING: multiple messages have this Message-ID (diff)
From: Yinghai Lu <yinghai@kernel.org>
To: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>,
Andrew Morton <akpm@linux-foundation.org>,
David Miller <davem@davemloft.net>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>,
Johannes Weiner <hannes@cmpxchg.org>,
linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org,
Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH 33/37] x86: Use wake_system_ram_range() instead of e820_any_mapped() in agp path
Date: Fri, 14 May 2010 12:45:59 -0700 [thread overview]
Message-ID: <1273866363-14249-34-git-send-email-yinghai@kernel.org> (raw)
Message-ID: <20100514194559.sDbnxaGuJGWvuN4_So9h4KWbztStkX6rBSSBzKUY-b4@z> (raw)
In-Reply-To: <1273866363-14249-1-git-send-email-yinghai@kernel.org>
Move apterture_valid back to .c
and early path still use e820_any_mapped()
So later we can make e820_any_mapped() to _init
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/include/asm/gart.h | 22 ----------------------
arch/x86/kernel/aperture_64.c | 22 ++++++++++++++++++++++
drivers/char/agp/amd64-agp.c | 39 ++++++++++++++++++++++++++++++++++++++-
3 files changed, 60 insertions(+), 23 deletions(-)
diff --git a/arch/x86/include/asm/gart.h b/arch/x86/include/asm/gart.h
index 4ac5b0f..2b63a91 100644
--- a/arch/x86/include/asm/gart.h
+++ b/arch/x86/include/asm/gart.h
@@ -74,26 +74,4 @@ static inline void enable_gart_translation(struct pci_dev *dev, u64 addr)
pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl);
}
-static inline int aperture_valid(u64 aper_base, u32 aper_size, u32 min_size)
-{
- if (!aper_base)
- return 0;
-
- if (aper_base + aper_size > 0x100000000ULL) {
- printk(KERN_INFO "Aperture beyond 4GB. Ignoring.\n");
- return 0;
- }
- if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) {
- printk(KERN_INFO "Aperture pointing to e820 RAM. Ignoring.\n");
- return 0;
- }
- if (aper_size < min_size) {
- printk(KERN_INFO "Aperture too small (%d MB) than (%d MB)\n",
- aper_size>>20, min_size>>20);
- return 0;
- }
-
- return 1;
-}
-
#endif /* _ASM_X86_GART_H */
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index b5d8b0b..4755b5a 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -145,6 +145,28 @@ static u32 __init find_cap(int bus, int slot, int func, int cap)
return 0;
}
+static int __init aperture_valid(u64 aper_base, u32 aper_size, u32 min_size)
+{
+ if (!aper_base)
+ return 0;
+
+ if (aper_base + aper_size > 0x100000000ULL) {
+ printk(KERN_INFO "Aperture beyond 4GB. Ignoring.\n");
+ return 0;
+ }
+ if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) {
+ printk(KERN_INFO "Aperture pointing to e820 RAM. Ignoring.\n");
+ return 0;
+ }
+ if (aper_size < min_size) {
+ printk(KERN_INFO "Aperture too small (%d MB) than (%d MB)\n",
+ aper_size>>20, min_size>>20);
+ return 0;
+ }
+
+ return 1;
+}
+
/* Read a standard AGPv3 bridge header */
static u32 __init read_agp(int bus, int slot, int func, int cap, u32 *order)
{
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index fd50ead..85cabd0 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -14,7 +14,6 @@
#include <linux/agp_backend.h>
#include <linux/mmzone.h>
#include <asm/page.h> /* PAGE_SIZE */
-#include <asm/e820.h>
#include <asm/k8.h>
#include <asm/gart.h>
#include "agp.h"
@@ -231,6 +230,44 @@ static const struct agp_bridge_driver amd_8151_driver = {
.agp_type_to_mask_type = agp_generic_type_to_mask_type,
};
+static int __devinit
+__is_ram(unsigned long pfn, unsigned long nr_pages, void *arg)
+{
+ return 1;
+}
+
+static int __devinit any_ram_in_range(u64 base, u64 size)
+{
+ unsigned long pfn, nr_pages;
+
+ pfn = base >> PAGE_SHIFT;
+ nr_pages = size >> PAGE_SHIFT;
+
+ return walk_system_ram_range(pfn, nr_pages, NULL, __is_ram) == 1;
+}
+
+static int __devinit aperture_valid(u64 aper_base, u32 aper_size, u32 min_size)
+{
+ if (!aper_base)
+ return 0;
+
+ if (aper_base + aper_size > 0x100000000ULL) {
+ printk(KERN_INFO "Aperture beyond 4GB. Ignoring.\n");
+ return 0;
+ }
+ if (any_ram_in_range(aper_base, aper_size)) {
+ printk(KERN_INFO "Aperture pointing to E820 RAM. Ignoring.\n");
+ return 0;
+ }
+ if (aper_size < min_size) {
+ printk(KERN_INFO "Aperture too small (%d MB) than (%d MB)\n",
+ aper_size>>20, min_size>>20);
+ return 0;
+ }
+
+ return 1;
+}
+
/* Some basic sanity checks for the aperture. */
static int __devinit agp_aperture_valid(u64 aper, u32 size)
{
--
1.6.4.2
next prev parent reply other threads:[~2010-05-14 19:45 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-14 19:45 [PATCH -v17 00/37] Use lmb with x86 Yinghai Lu
2010-05-14 19:45 ` Yinghai Lu
2010-05-14 19:45 ` [PATCH 01/37] lmb: lmb_find_base() should return LMB_ERROR on failing path Yinghai Lu
2010-05-14 19:45 ` Yinghai Lu
2010-05-14 19:45 ` [PATCH 02/37] lmb: Prepare x86 to use lmb to replace early_res Yinghai Lu
2010-05-14 19:45 ` Yinghai Lu
2010-05-14 19:45 ` [PATCH 03/37] lmb: Print new doubled array location info Yinghai Lu
2010-05-14 19:45 ` Yinghai Lu
2010-05-14 19:45 ` [PATCH 04/37] lmb: Export LMB_ERROR again Yinghai Lu
2010-05-14 19:45 ` Yinghai Lu
2010-05-14 19:45 ` [PATCH 05/37] lmb: Prepare to include linux/lmb.h in core file Yinghai Lu
2010-05-14 19:45 ` Yinghai Lu
2010-05-14 19:45 ` [PATCH 06/37] lmb: Add ARCH_DISCARD_LMB to put lmb code to .init Yinghai Lu
2010-05-14 19:45 ` Yinghai Lu
2010-05-14 19:45 ` [PATCH 07/37] lmb: Add lmb_find_area() Yinghai Lu
2010-05-14 19:45 ` Yinghai Lu
2010-05-14 22:39 ` Benjamin Herrenschmidt
2010-05-14 23:08 ` Yinghai
2010-05-15 0:11 ` Yinghai
2010-05-17 0:48 ` Benjamin Herrenschmidt
2010-05-17 6:09 ` Yinghai
2010-05-14 19:45 ` [PATCH 08/37] x86, lmb: Add lmb_find_area_size() Yinghai Lu
2010-05-14 19:45 ` Yinghai Lu
2010-05-14 19:45 ` [PATCH 09/37] bootmem, x86: Add weak version of reserve_bootmem_generic Yinghai Lu
2010-05-14 19:45 ` Yinghai Lu
2010-05-14 19:45 ` [PATCH 10/37] x86, lmb: Add lmb_to_bootmem() Yinghai Lu
2010-05-14 19:45 ` Yinghai Lu
2010-05-14 19:45 ` [PATCH 11/37] x86,lmb: Add lmb_reserve_area/lmb_free_area Yinghai Lu
2010-05-14 19:45 ` Yinghai Lu
2010-05-14 19:45 ` [PATCH 12/37] x86, lmb: Add get_free_all_memory_range() Yinghai Lu
2010-05-14 19:45 ` Yinghai Lu
2010-05-14 19:45 ` [PATCH 13/37] x86, lmb: Add lmb_register_active_regions() and lmb_hole_size() Yinghai Lu
2010-05-14 19:45 ` Yinghai Lu
2010-05-14 19:45 ` [PATCH 14/37] lmb: Add find_memory_core_early() Yinghai Lu
2010-05-14 19:45 ` Yinghai Lu
2010-05-14 19:45 ` [PATCH 15/37] x86, lmb: Add lmb_find_area_node() Yinghai Lu
2010-05-14 19:45 ` Yinghai Lu
2010-05-14 19:45 ` [PATCH 16/37] x86, lmb: Add lmb_free_memory_size() Yinghai Lu
2010-05-14 19:45 ` Yinghai Lu
2010-05-14 19:45 ` [PATCH 17/37] x86, lmb: Add lmb_memory_size() Yinghai Lu
2010-05-14 19:45 ` Yinghai Lu
2010-05-14 19:45 ` [PATCH 18/37] x86, lmb: Use lmb_debug to control debug message print out Yinghai Lu
2010-05-14 19:45 ` Yinghai Lu
2010-05-14 19:45 ` [PATCH 19/37] x86, lmb: Add x86 version of __lmb_find_area() Yinghai Lu
2010-05-14 19:45 ` Yinghai Lu
2010-05-14 19:45 ` [PATCH 20/37] x86: Use lmb to replace early_res Yinghai Lu
2010-05-14 19:45 ` Yinghai Lu
2010-05-14 19:45 ` [PATCH 21/37] x86: Replace e820_/_early string with lmb_ Yinghai Lu
2010-05-14 19:45 ` Yinghai Lu
2010-05-14 19:45 ` [PATCH 22/37] x86: Remove not used early_res code Yinghai Lu
2010-05-14 19:45 ` Yinghai Lu
2010-05-14 19:45 ` [PATCH 23/37] x86, lmb: Use lmb_memory_size()/lmb_free_memory_size() to get correct dma_reserve Yinghai Lu
2010-05-14 19:45 ` Yinghai Lu
2010-05-14 19:45 ` [PATCH 24/37] bootmem: Add nobootmem.c to reduce the #ifdef Yinghai Lu
2010-05-14 19:45 ` Yinghai Lu
2010-05-14 19:45 ` [PATCH 25/37] mm: move contig_page_data define to bootmem.c/nobootmem.c Yinghai Lu
2010-05-14 19:45 ` Yinghai Lu
2010-05-14 19:45 ` [PATCH 26/37] lmb: Move __alloc_memory_core_early() to nobootmem.c Yinghai Lu
2010-05-14 19:45 ` Yinghai Lu
2010-05-14 19:45 ` [PATCH 27/37] x86: Have nobootmem version setup_bootmem_allocator() Yinghai Lu
2010-05-14 19:45 ` Yinghai Lu
2010-05-14 19:45 ` [PATCH 28/37] x86: Put 64 bit numa node memmap above 16M Yinghai Lu
2010-05-14 19:45 ` Yinghai Lu
2010-05-14 19:45 ` [PATCH 29/37] swiotlb: Use page alignment for early buffer allocation Yinghai Lu
2010-05-14 19:45 ` Yinghai Lu
2010-05-14 19:45 ` [PATCH 30/37] x86: Add sanitize_e820_map() Yinghai Lu
2010-05-14 19:45 ` Yinghai Lu
2010-05-14 19:45 ` [PATCH 31/37] x86: Change e820_saved to __initdata Yinghai Lu
2010-05-14 19:45 ` Yinghai Lu
2010-05-14 19:45 ` [PATCH 32/37] x86: Align e820 ram range to page Yinghai Lu
2010-05-14 19:45 ` Yinghai Lu
2010-05-14 19:45 ` Yinghai Lu [this message]
2010-05-14 19:45 ` [PATCH 33/37] x86: Use wake_system_ram_range() instead of e820_any_mapped() in agp path Yinghai Lu
2010-05-14 19:46 ` [PATCH 34/37] x86: Add get_centaur_ram_top() Yinghai Lu
2010-05-14 19:46 ` Yinghai Lu
2010-05-14 19:46 ` [PATCH 35/37] x86: Change e820_any_mapped() to __init Yinghai Lu
2010-05-14 19:46 ` Yinghai Lu
2010-05-14 19:46 ` [PATCH 36/37] x86: Use walk_system_ream_range() instead of referring e820.map directly for tboot Yinghai Lu
2010-05-14 19:46 ` Yinghai Lu
2010-05-14 19:46 ` [PATCH 37/37] x86: make e820 to be __initdata Yinghai Lu
2010-05-14 19:46 ` Yinghai Lu
-- strict thread matches above, loose matches on Subject: below --
2010-06-16 5:42 [PATCH -v18 00/37] Use lmb with x86 Yinghai Lu
2010-06-16 5:42 ` [PATCH 33/37] x86: Use wake_system_ram_range() instead of e820_any_mapped() in agp path Yinghai Lu
2010-06-16 5:42 ` Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1273866363-14249-34-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=davem@davemloft.net \
--cc=hannes@cmpxchg.org \
--cc=hpa@zytor.com \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).