From: Yinghai Lu <yinghai@kernel.org>
To: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>,
Andrew Morton <akpm@linux-foundation.org>,
David Miller <davem@davemloft.net>,
Be
Cc: Johannes Weiner <hannes@cmpxchg.org>,
linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org,
Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH 16/17] x86, memblock: Use memblock_memory_size()/memblock_free_memory_size() to get correct dma_reserve
Date: Thu, 29 Jul 2010 12:45:36 -0700 [thread overview]
Message-ID: <1280432737-1808-17-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1280432737-1808-1-git-send-email-yinghai@kernel.org>
memblock_memory_size() will return memory size in memblock.memory.region.
memblock_free_memory_size() will return free memory size in memblock.memory.region.
So We can get exact reseved size in specified range.
Set the size right after initmem_init(), because later bootmem API will
get area above 16M. (except some fallback).
Later after we remove the bootmem, We could call that just before paging_init().
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/include/asm/e820.h | 2 ++
arch/x86/kernel/e820.c | 17 +++++++++++++++++
arch/x86/kernel/setup.c | 1 +
arch/x86/mm/init_64.c | 7 -------
4 files changed, 20 insertions(+), 7 deletions(-)
diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h
index 7186463..5be1542 100644
--- a/arch/x86/include/asm/e820.h
+++ b/arch/x86/include/asm/e820.h
@@ -117,6 +117,8 @@ extern unsigned long e820_end_of_low_ram_pfn(void);
extern u64 early_reserve_e820(u64 startt, u64 sizet, u64 align);
void memblock_x86_fill(void);
+void memblock_find_dma_reserve(void);
+
extern void finish_e820_parsing(void);
extern void e820_reserve_resources(void);
extern void e820_reserve_resources_late(void);
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index d5fd894..f0db4c4 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -1105,3 +1105,20 @@ void __init memblock_x86_fill(void)
memblock_analyze();
memblock_dump_all();
}
+
+void __init memblock_find_dma_reserve(void)
+{
+#ifdef CONFIG_X86_64
+ u64 free_size_pfn;
+ u64 mem_size_pfn;
+ /*
+ * need to find out used area below MAX_DMA_PFN
+ * need to use memblock to get free size in [0, MAX_DMA_PFN]
+ * at first, and assume boot_mem will not take below MAX_DMA_PFN
+ */
+ mem_size_pfn = memblock_x86_memory_in_range(0, MAX_DMA_PFN << PAGE_SHIFT) >> PAGE_SHIFT;
+ free_size_pfn = memblock_x86_free_memory_in_range(0, MAX_DMA_PFN << PAGE_SHIFT) >> PAGE_SHIFT;
+ set_dma_reserve(mem_size_pfn - free_size_pfn);
+#endif
+}
+
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index cac2c4c..58d7ece 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -1019,6 +1019,7 @@ void __init setup_arch(char **cmdline_p)
#endif
initmem_init(0, max_pfn, acpi, k8);
+ memblock_find_dma_reserve();
#ifndef CONFIG_NO_BOOTMEM
memblock_x86_to_bootmem(0, max_low_pfn<<PAGE_SHIFT);
#endif
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 592b236..d6d4084 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -53,8 +53,6 @@
#include <asm/init.h>
#include <linux/bootmem.h>
-static unsigned long dma_reserve __initdata;
-
static int __init parse_direct_gbpages_off(char *arg)
{
direct_gbpages = 0;
@@ -821,11 +819,6 @@ int __init reserve_bootmem_generic(unsigned long phys, unsigned long len,
reserve_bootmem(phys, len, flags);
- if (phys+len <= MAX_DMA_PFN*PAGE_SIZE) {
- dma_reserve += len / PAGE_SIZE;
- set_dma_reserve(dma_reserve);
- }
-
return 0;
}
#endif
--
1.6.4.2
WARNING: multiple messages have this Message-ID (diff)
From: Yinghai Lu <yinghai@kernel.org>
To: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>,
Andrew Morton <akpm@linux-foundation.org>,
David Miller <davem@davemloft.net>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Linus Torvalds <torvalds@linux-foundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>,
linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org,
Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH 16/17] x86, memblock: Use memblock_memory_size()/memblock_free_memory_size() to get correct dma_reserve
Date: Thu, 29 Jul 2010 12:45:36 -0700 [thread overview]
Message-ID: <1280432737-1808-17-git-send-email-yinghai@kernel.org> (raw)
Message-ID: <20100729194536.CBY8jqWsNryOI_rroiDpNeNyzcTZRnwjri0UohZc-5k@z> (raw)
In-Reply-To: <1280432737-1808-1-git-send-email-yinghai@kernel.org>
memblock_memory_size() will return memory size in memblock.memory.region.
memblock_free_memory_size() will return free memory size in memblock.memory.region.
So We can get exact reseved size in specified range.
Set the size right after initmem_init(), because later bootmem API will
get area above 16M. (except some fallback).
Later after we remove the bootmem, We could call that just before paging_init().
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/include/asm/e820.h | 2 ++
arch/x86/kernel/e820.c | 17 +++++++++++++++++
arch/x86/kernel/setup.c | 1 +
arch/x86/mm/init_64.c | 7 -------
4 files changed, 20 insertions(+), 7 deletions(-)
diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h
index 7186463..5be1542 100644
--- a/arch/x86/include/asm/e820.h
+++ b/arch/x86/include/asm/e820.h
@@ -117,6 +117,8 @@ extern unsigned long e820_end_of_low_ram_pfn(void);
extern u64 early_reserve_e820(u64 startt, u64 sizet, u64 align);
void memblock_x86_fill(void);
+void memblock_find_dma_reserve(void);
+
extern void finish_e820_parsing(void);
extern void e820_reserve_resources(void);
extern void e820_reserve_resources_late(void);
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index d5fd894..f0db4c4 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -1105,3 +1105,20 @@ void __init memblock_x86_fill(void)
memblock_analyze();
memblock_dump_all();
}
+
+void __init memblock_find_dma_reserve(void)
+{
+#ifdef CONFIG_X86_64
+ u64 free_size_pfn;
+ u64 mem_size_pfn;
+ /*
+ * need to find out used area below MAX_DMA_PFN
+ * need to use memblock to get free size in [0, MAX_DMA_PFN]
+ * at first, and assume boot_mem will not take below MAX_DMA_PFN
+ */
+ mem_size_pfn = memblock_x86_memory_in_range(0, MAX_DMA_PFN << PAGE_SHIFT) >> PAGE_SHIFT;
+ free_size_pfn = memblock_x86_free_memory_in_range(0, MAX_DMA_PFN << PAGE_SHIFT) >> PAGE_SHIFT;
+ set_dma_reserve(mem_size_pfn - free_size_pfn);
+#endif
+}
+
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index cac2c4c..58d7ece 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -1019,6 +1019,7 @@ void __init setup_arch(char **cmdline_p)
#endif
initmem_init(0, max_pfn, acpi, k8);
+ memblock_find_dma_reserve();
#ifndef CONFIG_NO_BOOTMEM
memblock_x86_to_bootmem(0, max_low_pfn<<PAGE_SHIFT);
#endif
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 592b236..d6d4084 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -53,8 +53,6 @@
#include <asm/init.h>
#include <linux/bootmem.h>
-static unsigned long dma_reserve __initdata;
-
static int __init parse_direct_gbpages_off(char *arg)
{
direct_gbpages = 0;
@@ -821,11 +819,6 @@ int __init reserve_bootmem_generic(unsigned long phys, unsigned long len,
reserve_bootmem(phys, len, flags);
- if (phys+len <= MAX_DMA_PFN*PAGE_SIZE) {
- dma_reserve += len / PAGE_SIZE;
- set_dma_reserve(dma_reserve);
- }
-
return 0;
}
#endif
--
1.6.4.2
next prev parent reply other threads:[~2010-07-29 19:46 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-29 19:45 [PATCH -v27 00/17] Use memblock with x86 Yinghai Lu
2010-07-29 19:45 ` Yinghai Lu
2010-07-29 19:45 ` [PATCH 01/17] memblock: Add memblock_free/reserve_reserved_regions() Yinghai Lu
2010-07-29 19:45 ` Yinghai Lu
2010-07-29 19:45 ` [PATCH 02/17] x86, memblock: Add memblock_x86_find_in_range_size() Yinghai Lu
2010-07-29 19:45 ` Yinghai Lu
2010-07-29 19:45 ` [PATCH 03/17] bootmem, x86: Add weak version of reserve_bootmem_generic Yinghai Lu
2010-07-29 19:45 ` Yinghai Lu
2010-07-29 19:45 ` [PATCH 04/17] x86, memblock: Add memblock_x86_to_bootmem() Yinghai Lu
2010-07-29 19:45 ` Yinghai Lu
2010-07-29 19:45 ` [PATCH 05/17] x86,memblock: Add memblock_x86_reserve_range/memblock_x86_free_range Yinghai Lu
2010-07-29 19:45 ` Yinghai Lu
2010-07-29 19:45 ` [PATCH 06/17] x86, memblock: Add get_free_all_memory_range() Yinghai Lu
2010-07-29 19:45 ` Yinghai Lu
2010-07-29 19:45 ` [PATCH 07/17] x86, memblock: Add memblock_x86_register_active_regions() and memblock_x86_hole_size() Yinghai Lu
2010-07-29 19:45 ` Yinghai Lu
2010-07-29 19:45 ` [PATCH 08/17] memblock: Add find_memory_core_early() Yinghai Lu
2010-07-29 19:45 ` Yinghai Lu
2010-07-29 19:45 ` [PATCH 09/17] x86, memblock: Add memblock_x86_find_in_range_node() Yinghai Lu
2010-07-29 19:45 ` Yinghai Lu
2010-07-29 19:45 ` [PATCH 10/17] x86, memblock: Add memblock_x86_free_memory_in_range() Yinghai Lu
2010-07-29 19:45 ` Yinghai Lu
2010-07-29 19:45 ` [PATCH 11/17] x86, memblock: Add memblock_x86_memory_in_range() Yinghai Lu
2010-07-29 19:45 ` Yinghai Lu
2010-07-29 19:45 ` [PATCH 12/17] x86, memblock: Use memblock_debug to control debug message print out Yinghai Lu
2010-07-29 19:45 ` Yinghai Lu
2010-07-29 19:45 ` [PATCH 13/17] x86: Use memblock to replace early_res Yinghai Lu
2010-07-29 19:45 ` Yinghai Lu
2010-07-29 19:45 ` [PATCH 14/17] x86: Replace e820_/_early string with memblock_ Yinghai Lu
2010-07-29 19:45 ` Yinghai Lu
2010-07-29 19:45 ` [PATCH 15/17] x86: Remove not used early_res code Yinghai Lu
2010-07-29 19:45 ` Yinghai Lu
2010-07-29 19:45 ` Yinghai Lu [this message]
2010-07-29 19:45 ` [PATCH 16/17] x86, memblock: Use memblock_memory_size()/memblock_free_memory_size() to get correct dma_reserve Yinghai Lu
2010-07-29 19:45 ` [PATCH 17/17] x86: remove old bootmem code Yinghai Lu
2010-07-29 19:45 ` Yinghai Lu
2010-07-31 7:15 ` [PATCH 01/17 -v2] memblock: Add memblock_free/reserve_reserved_regions() Yinghai Lu
2010-07-31 7:15 ` Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1280432737-1808-17-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=davem@davemloft.net \
--cc=hannes@cmpxchg.org \
--cc=hpa@zytor.com \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).