From: Jonas Bonn <jonas@southpole.se>
To: linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org
Cc: Jonas Bonn <jonas@southpole.se>
Subject: [PATCH v2 14/19] OpenRISC: Module support
Date: Sat, 2 Jul 2011 23:15:47 +0200 [thread overview]
Message-ID: <1309641352-18714-15-git-send-email-jonas@southpole.se> (raw)
In-Reply-To: <1309641352-18714-1-git-send-email-jonas@southpole.se>
This is still our old module support implementation. There's a pending
patch to move a lot of this functionality into default hooks that are
available in core code to all arches; if that patch is accepted, this
patch becomes significantly smaller.
Signed-off-by: Jonas Bonn <jonas@southpole.se>
---
arch/openrisc/kernel/module.c | 126 +++++++++++++++++++++++++++++++++++++++++
1 files changed, 126 insertions(+), 0 deletions(-)
create mode 100644 arch/openrisc/kernel/module.c
diff --git a/arch/openrisc/kernel/module.c b/arch/openrisc/kernel/module.c
new file mode 100644
index 0000000..952b129
--- /dev/null
+++ b/arch/openrisc/kernel/module.c
@@ -0,0 +1,126 @@
+/*
+ * OpenRISC module.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/moduleloader.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+
+void *module_alloc(unsigned long size)
+{
+ pr_debug("module_alloc size: %lu\n", size);
+
+ if (size == 0)
+ return NULL;
+
+ return vmalloc(size);
+}
+
+
+/* Free memory returned from module_alloc */
+void module_free(struct module *mod, void *module_region)
+{
+ vfree(module_region);
+ /* FIXME: If module_region == mod->init_region, trim exception
+ table entries. */
+}
+
+/* We don't need anything special. */
+int module_frob_arch_sections(Elf_Ehdr *hdr,
+ Elf_Shdr *sechdrs,
+ char *secstrings,
+ struct module *mod)
+{
+ return 0;
+}
+
+int apply_relocate_add(Elf32_Shdr *sechdrs,
+ const char *strtab,
+ unsigned int symindex,
+ unsigned int relsec,
+ struct module *me)
+{
+ unsigned int i;
+ Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr;
+ Elf32_Sym *sym;
+// Elf32_Addr relocation;
+ uint32_t *location;
+ uint32_t value;
+
+ pr_debug("Applying relocate section %u to %u\n", relsec,
+ sechdrs[relsec].sh_info);
+ for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+ /* This is where to make the change */
+ location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+ + rel[i].r_offset;
+
+ /* This is the symbol it is referring to. Note that all
+ undefined symbols have been resolved. */
+ sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
+ + ELF32_R_SYM(rel[i].r_info);
+ value = sym->st_value + rel[i].r_addend;
+
+ switch(ELF32_R_TYPE(rel[i].r_info)) {
+ case R_OR32_32:
+ *location = value;
+ break;
+ case R_OR32_CONST:
+ location = (uint16_t*)location + 1;
+ *((uint16_t*)location) = (uint16_t) (value);
+ break;
+ case R_OR32_CONSTH:
+ location = (uint16_t*)location + 1;
+ *((uint16_t*)location) = (uint16_t) (value >> 16);
+ break;
+ case R_OR32_JUMPTARG:
+ value -= (uint32_t)location;
+ value >>= 2;
+ value &= 0x03ffffff;
+ value |= *location & 0xfc000000;
+ *location = value;
+ break;
+ default:
+ pr_err("module %s: Unknown relocation: %u\n",
+ me->name, ELF32_R_TYPE(rel[i].r_info));
+ break;
+ }
+ }
+
+ return 0;
+}
+
+int apply_relocate(Elf32_Shdr *sechdrs,
+ const char *strtab,
+ unsigned int symindex,
+ unsigned int relsec,
+ struct module *me)
+{
+ pr_err("module %s: REL relocation unsupported\n", me->name);
+ return -ENOEXEC;
+}
+
+int module_finalize(const Elf_Ehdr *hdr,
+ const Elf_Shdr *sechdrs,
+ struct module *me)
+{
+ return 0;
+}
+
+void module_arch_cleanup(struct module *mod)
+{
+}
--
1.7.4.1
next prev parent reply other threads:[~2011-07-02 21:16 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-02 21:15 OpenRISC Architecture: Patch set version 2 Jonas Bonn
2011-07-02 21:15 ` [PATCH v2 01/19] OpenRISC: Boot code Jonas Bonn
2011-07-02 21:15 ` [PATCH v2 02/19] OpenRISC: Device tree Jonas Bonn
2011-07-02 21:15 ` Jonas Bonn
2011-07-03 18:07 ` Segher Boessenkool
2011-07-03 20:51 ` Grant Likely
[not found] ` <CACxGe6tFX=EQjaL-4EjSXquY5eh+bca29=d=cE5-YAVCUVRCvA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-07-03 21:39 ` Benjamin Herrenschmidt
2011-07-03 21:39 ` Benjamin Herrenschmidt
2011-07-04 4:58 ` Jonas Bonn
2011-07-04 4:58 ` Jonas Bonn
2011-07-04 5:35 ` Grant Likely
2011-07-02 21:15 ` [PATCH v2 03/19] OpenRISC: Memory management Jonas Bonn
2011-07-02 21:15 ` [PATCH v2 04/19] OpenRISC: Signal handling Jonas Bonn
2011-07-02 21:15 ` Jonas Bonn
2011-07-02 21:15 ` [PATCH v2 05/19] OpenRISC: Build infrastructure Jonas Bonn
2011-07-02 21:15 ` Jonas Bonn
2011-07-02 21:15 ` [PATCH v2 06/19] OpenRISC: PTrace Jonas Bonn
2011-07-03 19:40 ` Marcin Slusarz
2011-07-05 15:42 ` Arnd Bergmann
2011-07-05 16:05 ` Jonas Bonn
2011-07-05 16:05 ` Jonas Bonn
2011-07-05 16:42 ` Arnd Bergmann
2011-07-02 21:15 ` [PATCH v2 07/19] OpenRISC: DMA Jonas Bonn
2011-07-05 15:37 ` Arnd Bergmann
2011-07-08 7:36 ` Jonas Bonn
2011-07-08 7:44 ` Arnd Bergmann
2011-07-02 21:15 ` [PATCH v2 08/19] OpenRISC: Timekeeping Jonas Bonn
2011-07-02 21:15 ` Jonas Bonn
2011-07-02 21:15 ` [PATCH v2 09/19] OpenRISC: IRQ Jonas Bonn
2011-07-02 21:15 ` Jonas Bonn
2011-07-02 21:15 ` [PATCH v2 10/19] OpenRISC: System calls Jonas Bonn
2011-07-02 21:15 ` Jonas Bonn
2011-07-05 15:39 ` Arnd Bergmann
2011-07-02 21:15 ` [PATCH v2 11/19] OpenRISC: Idle/Power management Jonas Bonn
2011-07-02 21:15 ` [PATCH v2 12/19] OpenRISC: Scheduling/Process management Jonas Bonn
2011-07-02 21:15 ` [PATCH v2 13/19] OpenRISC: GPIO Jonas Bonn
2011-07-02 21:15 ` Jonas Bonn
2011-07-02 21:15 ` Jonas Bonn [this message]
2011-07-02 21:15 ` [PATCH v2 15/19] OpenRISC: Traps Jonas Bonn
2011-07-02 21:15 ` [PATCH v2 16/19] OpenRISC: Headers Jonas Bonn
2011-07-02 21:15 ` [PATCH v2 17/19] OpenRISC: Library routines Jonas Bonn
2011-07-02 21:15 ` Jonas Bonn
2011-07-02 21:15 ` [PATCH v2 18/19] OpenRISC: Miscellaneous Jonas Bonn
2011-07-02 21:15 ` Jonas Bonn
2011-07-02 21:15 ` [PATCH v2 19/19] OpenRISC: Add MAINTAINERS entry Jonas Bonn
2011-07-02 21:15 ` Jonas Bonn
2011-07-05 15:56 ` OpenRISC Architecture: Patch set version 2 Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1309641352-18714-15-git-send-email-jonas@southpole.se \
--to=jonas@southpole.se \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).