From: Will Deacon <will.deacon@arm.com>
To: linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org
Cc: Will Deacon <will.deacon@arm.com>,
Mike Frysinger <vapier@gentoo.org>,
Ben Herrenschmidt <benh@kernel.crashing.org>
Subject: [RESEND PATCH 2/4] asm-generic: io: don't perform swab during {in,out} string functions
Date: Wed, 17 Oct 2012 16:45:02 +0100 [thread overview]
Message-ID: <1350488704-3711-3-git-send-email-will.deacon@arm.com> (raw)
In-Reply-To: <1350488704-3711-1-git-send-email-will.deacon@arm.com>
The {in,out}s{b,w,l} functions are designed to operate on a stream of
bytes and therefore should not perform any byte-swapping, regardless of
the CPU byte order.
This patch fixes the generic IO header so that {in,out}s{b,w,l} call
the __raw_{read,write} functions directly rather than going via the
endian-correcting accessors.
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Ben Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
---
include/asm-generic/io.h | 12 ++++++------
1 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/include/asm-generic/io.h b/include/asm-generic/io.h
index 3607921..403b861 100644
--- a/include/asm-generic/io.h
+++ b/include/asm-generic/io.h
@@ -148,7 +148,7 @@ static inline void insb(unsigned long addr, void *buffer, int count)
if (count) {
u8 *buf = buffer;
do {
- u8 x = inb(addr);
+ u8 x = __raw_readb(addr + PCI_IOBASE);
*buf++ = x;
} while (--count);
}
@@ -161,7 +161,7 @@ static inline void insw(unsigned long addr, void *buffer, int count)
if (count) {
u16 *buf = buffer;
do {
- u16 x = inw(addr);
+ u16 x = __raw_readw(addr + PCI_IOBASE);
*buf++ = x;
} while (--count);
}
@@ -174,7 +174,7 @@ static inline void insl(unsigned long addr, void *buffer, int count)
if (count) {
u32 *buf = buffer;
do {
- u32 x = inl(addr);
+ u32 x = __raw_readl(addr + PCI_IOBASE);
*buf++ = x;
} while (--count);
}
@@ -187,7 +187,7 @@ static inline void outsb(unsigned long addr, const void *buffer, int count)
if (count) {
const u8 *buf = buffer;
do {
- outb(*buf++, addr);
+ __raw_writeb(*buf++, addr + PCI_IOBASE);
} while (--count);
}
}
@@ -199,7 +199,7 @@ static inline void outsw(unsigned long addr, const void *buffer, int count)
if (count) {
const u16 *buf = buffer;
do {
- outw(*buf++, addr);
+ __raw_writew(*buf++, addr + PCI_IOBASE);
} while (--count);
}
}
@@ -211,7 +211,7 @@ static inline void outsl(unsigned long addr, const void *buffer, int count)
if (count) {
const u32 *buf = buffer;
do {
- outl(*buf++, addr);
+ __raw_writel(*buf++, addr + PCI_IOBASE);
} while (--count);
}
}
--
1.7.4.1
next prev parent reply other threads:[~2012-10-17 15:45 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-17 15:45 [RESEND PATCH 0/4] Fix endianness of generic I/O accessors Will Deacon
2012-10-17 15:45 ` Will Deacon
2012-10-17 15:45 ` [RESEND PATCH 1/4] asm-generic: io: remove {read,write} string functions Will Deacon
2012-10-17 15:45 ` Will Deacon
2012-10-26 13:29 ` Arnd Bergmann
2012-10-26 13:38 ` Will Deacon
2012-10-26 13:38 ` Will Deacon
2012-10-17 15:45 ` Will Deacon [this message]
2012-10-17 15:45 ` [RESEND PATCH 2/4] asm-generic: io: don't perform swab during {in,out} " Will Deacon
2012-10-17 19:16 ` Geert Uytterhoeven
2012-10-18 0:04 ` Benjamin Herrenschmidt
2012-10-18 5:48 ` Geert Uytterhoeven
2012-10-19 12:53 ` Will Deacon
2012-10-23 1:25 ` Benjamin Herrenschmidt
2012-10-23 1:25 ` Benjamin Herrenschmidt
2012-10-28 9:28 ` Geert Uytterhoeven
2012-10-28 20:38 ` Benjamin Herrenschmidt
2012-10-18 0:01 ` Benjamin Herrenschmidt
2012-10-17 15:45 ` [RESEND PATCH 3/4] mmc: mmci: use io{read,write}*_rep accessors instead of " Will Deacon
2012-10-17 15:45 ` Will Deacon
2012-10-17 15:45 ` [RESEND PATCH 4/4] net: smc91x: " Will Deacon
2012-10-17 15:45 ` Will Deacon
2012-10-19 8:25 ` James Hogan
2012-10-19 8:25 ` James Hogan
2012-10-19 9:27 ` Will Deacon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1350488704-3711-3-git-send-email-will.deacon@arm.com \
--to=will.deacon@arm.com \
--cc=benh@kernel.crashing.org \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=vapier@gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).