From: Vineet Gupta <Vineet.Gupta1@synopsys.com>
To: linux-arch@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: arnd@arndb.de, Vineet Gupta <Vineet.Gupta1@synopsys.com>
Subject: [PATCH v3 39/71] ARC: Futex support
Date: Thu, 24 Jan 2013 16:36:07 +0530 [thread overview]
Message-ID: <1359025589-22277-24-git-send-email-vgupta@synopsys.com> (raw)
In-Reply-To: <1359025589-22277-1-git-send-email-vgupta@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
---
arch/arc/include/asm/futex.h | 151 ++++++++++++++++++++++++++++++++++++++++++
1 files changed, 151 insertions(+), 0 deletions(-)
create mode 100644 arch/arc/include/asm/futex.h
diff --git a/arch/arc/include/asm/futex.h b/arch/arc/include/asm/futex.h
new file mode 100644
index 0000000..4dc64dd
--- /dev/null
+++ b/arch/arc/include/asm/futex.h
@@ -0,0 +1,151 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Vineetg: August 2010: From Android kernel work
+ */
+
+#ifndef _ASM_FUTEX_H
+#define _ASM_FUTEX_H
+
+#include <linux/futex.h>
+#include <linux/preempt.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)\
+ \
+ __asm__ __volatile__( \
+ "1: ld %1, [%2] \n" \
+ insn "\n" \
+ "2: st %0, [%2] \n" \
+ " mov %0, 0 \n" \
+ "3: \n" \
+ " .section .fixup,\"ax\" \n" \
+ " .align 4 \n" \
+ "4: mov %0, %4 \n" \
+ " b 3b \n" \
+ " .previous \n" \
+ " .section __ex_table,\"a\" \n" \
+ " .align 4 \n" \
+ " .word 1b, 4b \n" \
+ " .word 2b, 4b \n" \
+ " .previous \n" \
+ \
+ : "=&r" (ret), "=&r" (oldval) \
+ : "r" (uaddr), "r" (oparg), "ir" (-EFAULT) \
+ : "cc", "memory")
+
+static inline int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr)
+{
+ int op = (encoded_op >> 28) & 7;
+ int cmp = (encoded_op >> 24) & 15;
+ int oparg = (encoded_op << 8) >> 20;
+ int cmparg = (encoded_op << 20) >> 20;
+ int oldval = 0, ret;
+
+ if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+ oparg = 1 << oparg;
+
+ if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+ return -EFAULT;
+
+ pagefault_disable(); /* implies preempt_disable() */
+
+ switch (op) {
+ case FUTEX_OP_SET:
+ __futex_atomic_op("mov %0, %3", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_ADD:
+ __futex_atomic_op("add %0, %1, %3", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_OR:
+ __futex_atomic_op("or %0, %1, %3", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_ANDN:
+ __futex_atomic_op("bic %0, %1, %3", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_XOR:
+ __futex_atomic_op("xor %0, %1, %3", ret, oldval, uaddr, oparg);
+ break;
+ default:
+ ret = -ENOSYS;
+ }
+
+ pagefault_enable(); /* subsumes preempt_enable() */
+
+ if (!ret) {
+ switch (cmp) {
+ case FUTEX_OP_CMP_EQ:
+ ret = (oldval == cmparg);
+ break;
+ case FUTEX_OP_CMP_NE:
+ ret = (oldval != cmparg);
+ break;
+ case FUTEX_OP_CMP_LT:
+ ret = (oldval < cmparg);
+ break;
+ case FUTEX_OP_CMP_GE:
+ ret = (oldval >= cmparg);
+ break;
+ case FUTEX_OP_CMP_LE:
+ ret = (oldval <= cmparg);
+ break;
+ case FUTEX_OP_CMP_GT:
+ ret = (oldval > cmparg);
+ break;
+ default:
+ ret = -ENOSYS;
+ }
+ }
+ return ret;
+}
+
+/* Compare-xchg with preemption disabled.
+ * Notes:
+ * -Best-Effort: Exchg happens only if compare succeeds.
+ * If compare fails, returns; leaving retry/looping to upper layers
+ * -successful cmp-xchg: return orig value in @addr (same as cmp val)
+ * -Compare fails: return orig value in @addr
+ * -user access r/w fails: return -EFAULT
+ */
+static inline int
+futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, u32 oldval,
+ u32 newval)
+{
+ u32 val;
+
+ if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+ return -EFAULT;
+
+ pagefault_disable(); /* implies preempt_disable() */
+
+ /* TBD : can use llock/scond */
+ __asm__ __volatile__(
+ "1: ld %0, [%3] \n"
+ " brne %0, %1, 3f \n"
+ "2: st %2, [%3] \n"
+ "3: \n"
+ " .section .fixup,\"ax\" \n"
+ "4: mov %0, %4 \n"
+ " b 3b \n"
+ " .previous \n"
+ " .section __ex_table,\"a\" \n"
+ " .align 4 \n"
+ " .word 1b, 4b \n"
+ " .word 2b, 4b \n"
+ " .previous\n"
+ : "=&r"(val)
+ : "r"(oldval), "r"(newval), "r"(uaddr), "ir"(-EFAULT)
+ : "cc", "memory");
+
+ pagefault_enable(); /* subsumes preempt_enable() */
+
+ *uval = val;
+ return val;
+}
+
+#endif
--
1.7.4.1
next prev parent reply other threads:[~2013-01-24 11:11 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-24 11:05 [PATCH v3 00/71] Synopsys ARC Linux kernel Port (Part #2) Vineet Gupta
2013-01-24 11:05 ` [PATCH v3 03/71] ARC: irqflags - Interrupt enabling/disabling at in-core intc Vineet Gupta
2013-01-24 11:05 ` [PATCH v3 04/71] ARC: Atomic/bitops/cmpxchg/barriers Vineet Gupta
2013-01-24 11:05 ` [PATCH v3 05/71] asm-generic headers: uaccess.h to conditionally define segment_eq() Vineet Gupta
2013-01-24 11:05 ` [PATCH v3 07/71] asm-generic: uaccess: Allow arches to over-ride __{get,put}_user_fn() Vineet Gupta
2013-01-24 11:05 ` [PATCH v3 08/71] ARC: [optim] uaccess __{get,put}_user() optimised Vineet Gupta
2013-01-24 11:05 ` Vineet Gupta
2013-01-24 11:05 ` [PATCH v3 09/71] asm-generic headers: Allow yet more arch overrides in checksum.h Vineet Gupta
2013-01-24 11:05 ` [PATCH v3 10/71] ARC: Checksum/byteorder/swab routines Vineet Gupta
2013-01-24 11:05 ` [PATCH v3 12/71] ARC: Spinlock/rwlock/mutex primitives Vineet Gupta
2013-01-24 11:05 ` [PATCH v3 13/71] ARC: String library Vineet Gupta
2013-01-24 11:05 ` Vineet Gupta
2013-01-24 11:05 ` [PATCH v3 14/71] ARC: Low level IRQ/Trap/Exception Handling Vineet Gupta
2013-01-28 7:44 ` Vineet Gupta
2013-01-24 11:05 ` [PATCH v3 15/71] ARC: Interrupt Handling Vineet Gupta
2013-01-24 11:05 ` [PATCH v3 16/71] ARC: Non-MMU Exception Handling Vineet Gupta
2013-01-24 11:05 ` [PATCH v3 24/71] ARC: Page Table Management Vineet Gupta
2013-01-24 11:05 ` [PATCH v3 25/71] ARC: MMU Context Management Vineet Gupta
2013-01-24 11:05 ` Vineet Gupta
2013-01-24 11:05 ` [PATCH v3 26/71] ARC: MMU Exception Handling Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 27/71] ARC: TLB flush Handling Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 28/71] ARC: Page Fault handling Vineet Gupta
2013-01-24 11:06 ` Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 31/71] ARC: [plat-arcfpga] Static platform device for CONFIG_SERIAL_ARC Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 35/71] ARC: Last bits (stubs) to get to a running kernel with UART Vineet Gupta
2013-01-24 11:06 ` Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 36/71] ARC: [plat-arcfpga] defconfig Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 37/71] ARC: [optim] Cache "current" in Register r25 Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 38/71] ARC: ptrace support Vineet Gupta
2013-01-24 11:06 ` Vineet Gupta
2013-01-24 11:06 ` Vineet Gupta [this message]
2013-01-24 11:06 ` [PATCH v3 40/71] ARC: OProfile support Vineet Gupta
2013-01-29 17:05 ` James Hogan
2013-01-30 6:34 ` Vineet Gupta
2013-01-30 10:54 ` James Hogan
2013-01-30 11:46 ` Vineet Gupta
2013-01-30 11:46 ` Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 41/71] ARC: Support for high priority interrupts in the in-core intc Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 43/71] ARC: Diagnostics: show_regs() etc Vineet Gupta
2013-01-24 11:06 ` Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 46/71] ARC: stacktracing APIs based on dw2 unwinder Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 47/71] ARC: disassembly (needed by kprobes/kgdb/unaligned-access-emul) Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 49/71] sysctl: Enable PARISC "unaligned-trap" to be used cross-arch Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 50/71] ARC: Unaligned access emulation Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 51/71] ARC: kgdb support Vineet Gupta
2013-01-24 11:06 ` Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 52/71] ARC: Boot #2: Verbose Boot reporting / feature verification Vineet Gupta
2013-01-24 11:06 ` Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 53/71] ARC: [plat-arfpga] BVCI Latency Unit setup Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 54/71] perf, ARC: Enable building perf tools for ARC Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 55/71] ARC: perf support (software counters only) Vineet Gupta
2013-01-24 11:06 ` Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 56/71] ARC: Support for single cycle Close Coupled Mem (CCM) Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 60/71] ARC: [Review] Multi-platform image #1: Kconfig enablement Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 61/71] ARC: Fold boards sub-menu into platform/SoC menu Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 63/71] ARC: [Review] Multi-platform image #3: switch to board callback Vineet Gupta
2013-01-24 11:06 ` Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 64/71] ARC: [Review] Multi-platform image #4: Isolate platform headers Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 65/71] ARC: [Review] Multi-platform image #5: NR_IRQS defined by ARC core Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 66/71] ARC: [Review] Multi-platform image #6: cpu-to-dma-addr optional Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 67/71] ARC: [Review] Multi-platform image #7: SMP common code to use callbacks Vineet Gupta
2013-01-24 11:06 ` Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 68/71] ARC: [Review] Multi-platform image #8: platform registers SMP callbacks Vineet Gupta
2013-01-24 11:06 ` Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 71/71] ARC: Add self to MAINTAINERS Vineet Gupta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1359025589-22277-24-git-send-email-vgupta@synopsys.com \
--to=vineet.gupta1@synopsys.com \
--cc=arnd@arndb.de \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).