From: Jiang Liu <liuj97@gmail.com> To: Andrew Morton <akpm@linux-foundation.org> Cc: Jiang Liu <jiang.liu@huawei.com>, David Rientjes <rientjes@google.com>, Wen Congyang <wency@cn.fujitsu.com>, Mel Gorman <mgorman@suse.de>, Minchan Kim <minchan@kernel.org>, KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>, Michal Hocko <mhocko@suse.cz>, James Bottomley <James.Bottomley@HansenPartnership.com>, Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>, David Howells <dhowells@redhat.com>, Mark Salter <msalter@redhat.com>, Jianguo Wu <wujianguo@huawei.com>, linux-mm@kvack.org, linux-arch@vger.kernel.org, linux-kernel@vger.kernel.org, Ralf Baechle <ralf@linux-mips.org>, David Daney <david.daney@cavium.com>, Arnd Bergmann <arnd@arndb.de>, Jiri Kosina <jkosina@suse.cz>, John Crispin <blogic@openwrt.org>, Greg Kroah-Hartman <gregkh@linuxfoundation.org> Subject: [PATCH v4, part3 27/41] mm/MIPS: prepare for removing num_physpages and simplify mem_init() Date: Sat, 6 Apr 2013 22:32:26 +0800 [thread overview] Message-ID: <1365258760-30821-28-git-send-email-jiang.liu@huawei.com> (raw) In-Reply-To: <1365258760-30821-1-git-send-email-jiang.liu@huawei.com> Prepare for removing num_physpages and simplify mem_init(). Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Daney <david.daney@cavium.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jiri Kosina <jkosina@suse.cz> Cc: John Crispin <blogic@openwrt.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Minchan Kim <minchan@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org --- arch/mips/mm/init.c | 57 ++++++++++++-------------------------- arch/mips/pci/pci-lantiq.c | 2 +- arch/mips/sgi-ip27/ip27-memory.c | 21 ++------------ 3 files changed, 21 insertions(+), 59 deletions(-) diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index de4ff2f..0392a1a 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -358,11 +358,24 @@ void __init paging_init(void) static struct kcore_list kcore_kseg0; #endif -void __init mem_init(void) +static inline void mem_init_free_highmem(void) { - unsigned long codesize, reservedpages, datasize, initsize; - unsigned long tmp, ram; +#ifdef CONFIG_HIGHMEM + unsigned long tmp; + for (tmp = highstart_pfn; tmp < highend_pfn; tmp++) { + struct page *page = pfn_to_page(tmp); + + if (!page_is_ram(tmp)) + SetPageReserved(page); + else + free_highmem_page(page); + } +#endif +} + +void __init mem_init(void) +{ #ifdef CONFIG_HIGHMEM #ifdef CONFIG_DISCONTIGMEM #error "CONFIG_HIGHMEM and CONFIG_DISCONTIGMEM dont work together yet" @@ -375,32 +388,8 @@ void __init mem_init(void) free_all_bootmem(); setup_zero_pages(); /* Setup zeroed pages. */ - - reservedpages = ram = 0; - for (tmp = 0; tmp < max_low_pfn; tmp++) - if (page_is_ram(tmp) && pfn_valid(tmp)) { - ram++; - if (PageReserved(pfn_to_page(tmp))) - reservedpages++; - } - num_physpages = ram; - -#ifdef CONFIG_HIGHMEM - for (tmp = highstart_pfn; tmp < highend_pfn; tmp++) { - struct page *page = pfn_to_page(tmp); - - if (!page_is_ram(tmp)) { - SetPageReserved(page); - continue; - } - free_highmem_page(page); - } - num_physpages += totalhigh_pages; -#endif - - codesize = (unsigned long) &_etext - (unsigned long) &_text; - datasize = (unsigned long) &_edata - (unsigned long) &_etext; - initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin; + mem_init_free_highmem(); + mem_init_print_info(NULL); #ifdef CONFIG_64BIT if ((unsigned long) &_text > (unsigned long) CKSEG0) @@ -409,16 +398,6 @@ void __init mem_init(void) kclist_add(&kcore_kseg0, (void *) CKSEG0, 0x80000000 - 4, KCORE_TEXT); #endif - - printk(KERN_INFO "Memory: %luk/%luk available (%ldk kernel code, " - "%ldk reserved, %ldk data, %ldk init, %ldk highmem)\n", - nr_free_pages() << (PAGE_SHIFT-10), - ram << (PAGE_SHIFT-10), - codesize >> 10, - reservedpages << (PAGE_SHIFT-10), - datasize >> 10, - initsize >> 10, - totalhigh_pages << (PAGE_SHIFT-10)); } #endif /* !CONFIG_NEED_MULTIPLE_NODES */ diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c index 879077b..cb1ef99 100644 --- a/arch/mips/pci/pci-lantiq.c +++ b/arch/mips/pci/pci-lantiq.c @@ -89,7 +89,7 @@ static inline u32 ltq_calc_bar11mask(void) u32 mem, bar11mask; /* BAR11MASK value depends on available memory on system. */ - mem = num_physpages * PAGE_SIZE; + mem = get_num_physpages() * PAGE_SIZE; bar11mask = (0x0ffffff0 & ~((1 << (fls(mem) - 1)) - 1)) | 8; return bar11mask; diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c index 936e617..d074680 100644 --- a/arch/mips/sgi-ip27/ip27-memory.c +++ b/arch/mips/sgi-ip27/ip27-memory.c @@ -357,8 +357,6 @@ static void __init szmem(void) int slot; cnodeid_t node; - num_physpages = 0; - for_each_online_node(node) { nodebytes = 0; for (slot = 0; slot < MAX_MEM_SLOTS; slot++) { @@ -381,7 +379,6 @@ static void __init szmem(void) slot = MAX_MEM_SLOTS; continue; } - num_physpages += slot_psize; memblock_add_node(PFN_PHYS(slot_getbasepfn(node, slot)), PFN_PHYS(slot_psize), node); } @@ -480,10 +477,9 @@ void __init paging_init(void) void __init mem_init(void) { - unsigned long codesize, datasize, initsize, tmp; unsigned node; - high_memory = (void *) __va(num_physpages << PAGE_SHIFT); + high_memory = (void *) __va(get_num_physpages() << PAGE_SHIFT); for_each_online_node(node) { /* @@ -494,18 +490,5 @@ void __init mem_init(void) setup_zero_pages(); /* This comes from node 0 */ - codesize = (unsigned long) &_etext - (unsigned long) &_text; - datasize = (unsigned long) &_edata - (unsigned long) &_etext; - initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin; - - tmp = nr_free_pages(); - printk(KERN_INFO "Memory: %luk/%luk available (%ldk kernel code, " - "%ldk reserved, %ldk data, %ldk init, %ldk highmem)\n", - tmp << (PAGE_SHIFT-10), - num_physpages << (PAGE_SHIFT-10), - codesize >> 10, - (num_physpages - tmp) << (PAGE_SHIFT-10), - datasize >> 10, - initsize >> 10, - totalhigh_pages << (PAGE_SHIFT-10)); + mem_init_print_info(NULL); } -- 1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: Jiang Liu <liuj97@gmail.com> To: Andrew Morton <akpm@linux-foundation.org> Cc: Jiang Liu <jiang.liu@huawei.com>, David Rientjes <rientjes@google.com>, Wen Congyang <wency@cn.fujitsu.com>, Mel Gorman <mgorman@suse.de>, Minchan Kim <minchan@kernel.org>, KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>, Michal Hocko <mhocko@suse.cz>, James Bottomley <James.Bottomley@HansenPartnership.com>, Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>, David Howells <dhowells@redhat.com>, Mark Salter <msalter@redhat.com>, Jianguo Wu <wujianguo@huawei.com>, linux-mm@kvack.org, linux-arch@vger.kernel.org, linux-kernel@vger.kernel.org, Ralf Baechle <ralf@linux-mips.org>, David Daney <david.daney@cavium.com>, Arnd Bergmann <arnd@arndb.de>, Jiri Kosina <jkosina@suse.cz>, John Crispin <blogic@openwrt.org>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, linux-mips@linux-mips.org Subject: [PATCH v4, part3 27/41] mm/MIPS: prepare for removing num_physpages and simplify mem_init() Date: Sat, 6 Apr 2013 22:32:26 +0800 [thread overview] Message-ID: <1365258760-30821-28-git-send-email-jiang.liu@huawei.com> (raw) Message-ID: <20130406143226.pcTE5UXoMUbymoJs1QZAwjZ_gQj9ZW4DZnU21mgM3Ww@z> (raw) In-Reply-To: <1365258760-30821-1-git-send-email-jiang.liu@huawei.com> Prepare for removing num_physpages and simplify mem_init(). Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Daney <david.daney@cavium.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jiri Kosina <jkosina@suse.cz> Cc: John Crispin <blogic@openwrt.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Minchan Kim <minchan@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org --- arch/mips/mm/init.c | 57 ++++++++++++-------------------------- arch/mips/pci/pci-lantiq.c | 2 +- arch/mips/sgi-ip27/ip27-memory.c | 21 ++------------ 3 files changed, 21 insertions(+), 59 deletions(-) diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index de4ff2f..0392a1a 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -358,11 +358,24 @@ void __init paging_init(void) static struct kcore_list kcore_kseg0; #endif -void __init mem_init(void) +static inline void mem_init_free_highmem(void) { - unsigned long codesize, reservedpages, datasize, initsize; - unsigned long tmp, ram; +#ifdef CONFIG_HIGHMEM + unsigned long tmp; + for (tmp = highstart_pfn; tmp < highend_pfn; tmp++) { + struct page *page = pfn_to_page(tmp); + + if (!page_is_ram(tmp)) + SetPageReserved(page); + else + free_highmem_page(page); + } +#endif +} + +void __init mem_init(void) +{ #ifdef CONFIG_HIGHMEM #ifdef CONFIG_DISCONTIGMEM #error "CONFIG_HIGHMEM and CONFIG_DISCONTIGMEM dont work together yet" @@ -375,32 +388,8 @@ void __init mem_init(void) free_all_bootmem(); setup_zero_pages(); /* Setup zeroed pages. */ - - reservedpages = ram = 0; - for (tmp = 0; tmp < max_low_pfn; tmp++) - if (page_is_ram(tmp) && pfn_valid(tmp)) { - ram++; - if (PageReserved(pfn_to_page(tmp))) - reservedpages++; - } - num_physpages = ram; - -#ifdef CONFIG_HIGHMEM - for (tmp = highstart_pfn; tmp < highend_pfn; tmp++) { - struct page *page = pfn_to_page(tmp); - - if (!page_is_ram(tmp)) { - SetPageReserved(page); - continue; - } - free_highmem_page(page); - } - num_physpages += totalhigh_pages; -#endif - - codesize = (unsigned long) &_etext - (unsigned long) &_text; - datasize = (unsigned long) &_edata - (unsigned long) &_etext; - initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin; + mem_init_free_highmem(); + mem_init_print_info(NULL); #ifdef CONFIG_64BIT if ((unsigned long) &_text > (unsigned long) CKSEG0) @@ -409,16 +398,6 @@ void __init mem_init(void) kclist_add(&kcore_kseg0, (void *) CKSEG0, 0x80000000 - 4, KCORE_TEXT); #endif - - printk(KERN_INFO "Memory: %luk/%luk available (%ldk kernel code, " - "%ldk reserved, %ldk data, %ldk init, %ldk highmem)\n", - nr_free_pages() << (PAGE_SHIFT-10), - ram << (PAGE_SHIFT-10), - codesize >> 10, - reservedpages << (PAGE_SHIFT-10), - datasize >> 10, - initsize >> 10, - totalhigh_pages << (PAGE_SHIFT-10)); } #endif /* !CONFIG_NEED_MULTIPLE_NODES */ diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c index 879077b..cb1ef99 100644 --- a/arch/mips/pci/pci-lantiq.c +++ b/arch/mips/pci/pci-lantiq.c @@ -89,7 +89,7 @@ static inline u32 ltq_calc_bar11mask(void) u32 mem, bar11mask; /* BAR11MASK value depends on available memory on system. */ - mem = num_physpages * PAGE_SIZE; + mem = get_num_physpages() * PAGE_SIZE; bar11mask = (0x0ffffff0 & ~((1 << (fls(mem) - 1)) - 1)) | 8; return bar11mask; diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c index 936e617..d074680 100644 --- a/arch/mips/sgi-ip27/ip27-memory.c +++ b/arch/mips/sgi-ip27/ip27-memory.c @@ -357,8 +357,6 @@ static void __init szmem(void) int slot; cnodeid_t node; - num_physpages = 0; - for_each_online_node(node) { nodebytes = 0; for (slot = 0; slot < MAX_MEM_SLOTS; slot++) { @@ -381,7 +379,6 @@ static void __init szmem(void) slot = MAX_MEM_SLOTS; continue; } - num_physpages += slot_psize; memblock_add_node(PFN_PHYS(slot_getbasepfn(node, slot)), PFN_PHYS(slot_psize), node); } @@ -480,10 +477,9 @@ void __init paging_init(void) void __init mem_init(void) { - unsigned long codesize, datasize, initsize, tmp; unsigned node; - high_memory = (void *) __va(num_physpages << PAGE_SHIFT); + high_memory = (void *) __va(get_num_physpages() << PAGE_SHIFT); for_each_online_node(node) { /* @@ -494,18 +490,5 @@ void __init mem_init(void) setup_zero_pages(); /* This comes from node 0 */ - codesize = (unsigned long) &_etext - (unsigned long) &_text; - datasize = (unsigned long) &_edata - (unsigned long) &_etext; - initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin; - - tmp = nr_free_pages(); - printk(KERN_INFO "Memory: %luk/%luk available (%ldk kernel code, " - "%ldk reserved, %ldk data, %ldk init, %ldk highmem)\n", - tmp << (PAGE_SHIFT-10), - num_physpages << (PAGE_SHIFT-10), - codesize >> 10, - (num_physpages - tmp) << (PAGE_SHIFT-10), - datasize >> 10, - initsize >> 10, - totalhigh_pages << (PAGE_SHIFT-10)); + mem_init_print_info(NULL); } -- 1.7.9.5
next prev parent reply other threads:[~2013-04-06 14:32 UTC|newest] Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top 2013-04-06 14:31 [PATCH v4, part3 00/41] Simplify mem_init() implementations and kill num_physpages Jiang Liu 2013-04-06 14:31 ` Jiang Liu 2013-04-06 14:32 ` [PATCH v4, part3 01/41] vmlinux.lds: add comments for global variables and clean up useless declarations Jiang Liu 2013-04-06 14:32 ` [PATCH v4, part3 02/41] avr32: normalize global variables exported by vmlinux.lds Jiang Liu 2013-04-06 14:32 ` Jiang Liu 2013-04-07 8:00 ` Hans-Christian Egtvedt 2013-04-07 8:00 ` Hans-Christian Egtvedt 2013-04-06 14:32 ` [PATCH v4, part3 03/41] c6x: " Jiang Liu 2013-04-06 14:32 ` Jiang Liu 2013-04-06 14:32 ` [PATCH v4, part3 04/41] h8300: " Jiang Liu 2013-04-06 14:32 ` Jiang Liu 2013-04-06 14:32 ` [PATCH v4, part3 05/41] score: " Jiang Liu 2013-04-06 14:32 ` Jiang Liu 2013-04-06 14:32 ` [PATCH v4, part3 06/41] tile: " Jiang Liu 2013-04-06 14:32 ` Jiang Liu 2013-04-12 20:54 ` Chris Metcalf 2013-04-06 14:32 ` [PATCH v4, part3 07/41] UML: " Jiang Liu 2013-04-06 14:32 ` Jiang Liu 2013-04-06 14:32 ` [PATCH v4, part3 08/41] mm: introduce helper function mem_init_print_info() to simplify mem_init() Jiang Liu 2013-04-06 14:32 ` Jiang Liu 2013-04-06 14:32 ` [PATCH v4, part3 09/41] mm: use totalram_pages instead of num_physpages at runtime Jiang Liu 2013-04-06 14:32 ` [PATCH v4, part3 10/41] mm/hotplug: prepare for removing num_physpages Jiang Liu 2013-04-06 14:32 ` [PATCH v4, part3 11/41] mm/alpha: prepare for removing num_physpages and simplify mem_init() Jiang Liu 2013-04-06 14:32 ` Jiang Liu 2013-04-06 14:32 ` [PATCH v4, part3 12/41] mm/ARC: " Jiang Liu 2013-04-06 14:32 ` Jiang Liu 2013-04-06 14:32 ` [PATCH v4, part3 13/41] mm/ARM: " Jiang Liu 2013-04-06 14:32 ` Jiang Liu 2013-04-19 16:54 ` Russell King - ARM Linux 2013-04-20 15:19 ` Jiang Liu 2013-04-20 15:19 ` Jiang Liu 2013-04-06 14:32 ` [PATCH v4, part3 14/41] mm/ARM64: " Jiang Liu 2013-04-06 14:32 ` Jiang Liu 2013-04-06 14:32 ` [PATCH v4, part3 15/41] mm/AVR32: " Jiang Liu 2013-04-06 14:32 ` Jiang Liu 2013-04-07 7:59 ` Hans-Christian Egtvedt 2013-04-07 7:59 ` Hans-Christian Egtvedt 2013-04-06 14:32 ` [PATCH v4, part3 16/41] mm/blackfin: " Jiang Liu 2013-04-06 14:32 ` Jiang Liu 2013-04-06 14:32 ` [PATCH v4, part3 17/41] mm/c6x: " Jiang Liu 2013-04-06 14:32 ` Jiang Liu 2013-04-06 14:32 ` [PATCH v4, part3 18/41] mm/cris: " Jiang Liu 2013-04-06 14:32 ` Jiang Liu 2013-04-08 9:52 ` Jesper Nilsson 2013-04-06 14:32 ` [PATCH v4, part3 19/41] mm/frv: " Jiang Liu 2013-04-06 14:32 ` Jiang Liu 2013-04-06 14:32 ` [PATCH v4, part3 20/41] mm/h8300: " Jiang Liu 2013-04-06 14:32 ` Jiang Liu 2013-04-06 14:32 ` [PATCH v4, part3 21/41] mm/hexagon: " Jiang Liu 2013-04-06 14:32 ` Jiang Liu 2013-04-06 14:32 ` [PATCH v4, part3 22/41] mm/IA64: " Jiang Liu 2013-04-06 14:32 ` Jiang Liu 2013-04-06 14:32 ` [PATCH v4, part3 23/41] mm/m32r: " Jiang Liu 2013-04-06 14:32 ` [PATCH v4, part3 24/41] mm/m68k: " Jiang Liu 2013-04-06 14:32 ` Jiang Liu 2013-04-08 1:34 ` Greg Ungerer 2013-04-08 1:34 ` Greg Ungerer 2013-04-06 14:32 ` [PATCH v4, part3 25/41] mm/metag: " Jiang Liu 2013-04-06 14:32 ` Jiang Liu 2013-04-06 14:32 ` [PATCH v4, part3 26/41] mm/microblaze: " Jiang Liu 2013-04-06 14:32 ` Jiang Liu 2013-04-06 14:32 ` Jiang Liu [this message] 2013-04-06 14:32 ` [PATCH v4, part3 27/41] mm/MIPS: " Jiang Liu 2013-04-06 14:32 ` [PATCH v4, part3 28/41] mm/mn10300: " Jiang Liu 2013-04-06 14:32 ` Jiang Liu 2013-04-06 14:32 ` [PATCH v4, part3 29/41] mm/openrisc: " Jiang Liu 2013-04-06 14:32 ` Jiang Liu 2013-04-06 14:32 ` [PATCH v4, part3 30/41] mm/PARISC: " Jiang Liu 2013-04-06 14:32 ` Jiang Liu 2013-04-06 14:32 ` [PATCH v4, part3 31/41] mm/ppc: " Jiang Liu 2013-04-06 14:32 ` Jiang Liu 2013-04-06 14:32 ` [PATCH v4, part3 32/41] mm/s390: " Jiang Liu 2013-04-06 14:32 ` [PATCH v4, part3 33/41] mm/score: " Jiang Liu 2013-04-06 14:32 ` [PATCH v4, part3 34/41] mm/SH: " Jiang Liu 2013-04-06 14:32 ` Jiang Liu 2013-04-06 14:32 ` [PATCH v4, part3 35/41] mm/SPARC: " Jiang Liu 2013-04-06 14:32 ` [PATCH v4, part3 36/41] mm/tile: " Jiang Liu 2013-04-06 14:32 ` Jiang Liu 2013-04-12 20:56 ` Chris Metcalf 2013-04-06 14:32 ` [PATCH v4, part3 37/41] mm/um: " Jiang Liu 2013-04-06 14:32 ` Jiang Liu 2013-04-06 14:32 ` [PATCH v4, part3 38/41] mm/unicore32: " Jiang Liu 2013-04-06 14:32 ` Jiang Liu 2013-04-06 14:32 ` [PATCH v4, part3 39/41] mm/x86: " Jiang Liu 2013-04-06 14:32 ` Jiang Liu 2013-04-06 14:32 ` [PATCH v4, part3 40/41] mm/xtensa: " Jiang Liu 2013-04-06 14:32 ` Jiang Liu 2013-04-06 14:32 ` [PATCH v4, part3 41/41] mm: kill global variable num_physpages Jiang Liu
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1365258760-30821-28-git-send-email-jiang.liu@huawei.com \ --to=liuj97@gmail.com \ --cc=James.Bottomley@HansenPartnership.com \ --cc=akpm@linux-foundation.org \ --cc=arnd@arndb.de \ --cc=blogic@openwrt.org \ --cc=david.daney@cavium.com \ --cc=dhowells@redhat.com \ --cc=gregkh@linuxfoundation.org \ --cc=jiang.liu@huawei.com \ --cc=jkosina@suse.cz \ --cc=kamezawa.hiroyu@jp.fujitsu.com \ --cc=linux-arch@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mm@kvack.org \ --cc=mgorman@suse.de \ --cc=mhocko@suse.cz \ --cc=minchan@kernel.org \ --cc=msalter@redhat.com \ --cc=ralf@linux-mips.org \ --cc=rientjes@google.com \ --cc=sergei.shtylyov@cogentembedded.com \ --cc=wency@cn.fujitsu.com \ --cc=wujianguo@huawei.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).