linux-arch.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jiang Liu <liuj97@gmail.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiang Liu <jiang.liu@huawei.com>,
	David Rientjes <rientjes@google.com>,
	Wen Congyang <wency@cn.fujitsu.com>, Mel Gorman <mgorman@suse.de>,
	Minchan Kim <minchan@kernel.org>,
	KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>,
	Michal Hocko <mhocko@suse.cz>,
	James Bottomley <James.Bottomley@HansenPartnership.com>,
	Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>,
	David Howells <dhowells@redhat.com>,
	Mark Salter <msalter@redhat.com>,
	Jianguo Wu <wujianguo@huawei.com>,
	linux-mm@kvack.org, linux-arch@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	"James E.J. Bottomley" <jejb@parisc-linux.org>,
	Helge Deller <deller@gmx.de>,
	Thomas Gleixner <tglx@linutronix.de>,
	linux-parisc@vger.kernel.org
Subject: [PATCH v4, part3 30/41] mm/PARISC: prepare for removing num_physpages and simplify mem_init()
Date: Sat,  6 Apr 2013 22:32:29 +0800	[thread overview]
Message-ID: <1365258760-30821-31-git-send-email-jiang.liu@huawei.com> (raw)
In-Reply-To: <1365258760-30821-1-git-send-email-jiang.liu@huawei.com>

Prepare for removing num_physpages and simplify mem_init().

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: linux-parisc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
 arch/parisc/mm/init.c |   46 +++-------------------------------------------
 1 file changed, 3 insertions(+), 43 deletions(-)

diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 1fe9d841..f80c175 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -214,7 +214,6 @@ static void __init setup_bootmem(void)
 	mem_limit_func();       /* check for "mem=" argument */
 
 	mem_max = 0;
-	num_physpages = 0;
 	for (i = 0; i < npmem_ranges; i++) {
 		unsigned long rsize;
 
@@ -229,10 +228,8 @@ static void __init setup_bootmem(void)
 				npmem_ranges = i + 1;
 				mem_max = mem_limit;
 			}
-	        num_physpages += pmem_ranges[i].pages;
 			break;
 		}
-	    num_physpages += pmem_ranges[i].pages;
 		mem_max += rsize;
 	}
 
@@ -532,7 +529,7 @@ void free_initmem(void)
 	 * pages are no-longer executable */
 	flush_icache_range(init_begin, init_end);
 	
-	num_physpages += free_initmem_default(-1);
+	free_initmem_default(-1);
 
 	/* set up a new led state on systems shipped LED State panel */
 	pdc_chassis_send_status(PDC_CHASSIS_DIRECT_BCOMPLETE);
@@ -580,8 +577,6 @@ unsigned long pcxl_dma_start __read_mostly;
 
 void __init mem_init(void)
 {
-	int codesize, reservedpages, datasize, initsize;
-
 	/* Do sanity checks on page table constants */
 	BUILD_BUG_ON(PTE_ENTRY_SIZE != sizeof(pte_t));
 	BUILD_BUG_ON(PMD_ENTRY_SIZE != sizeof(pmd_t));
@@ -603,33 +598,6 @@ void __init mem_init(void)
 	}
 #endif
 
-	codesize = (unsigned long)_etext - (unsigned long)_text;
-	datasize = (unsigned long)_edata - (unsigned long)_etext;
-	initsize = (unsigned long)__init_end - (unsigned long)__init_begin;
-
-	reservedpages = 0;
-{
-	unsigned long pfn;
-#ifdef CONFIG_DISCONTIGMEM
-	int i;
-
-	for (i = 0; i < npmem_ranges; i++) {
-		for (pfn = node_start_pfn(i); pfn < node_end_pfn(i); pfn++) {
-			if (PageReserved(pfn_to_page(pfn)))
-				reservedpages++;
-		}
-	}
-#else /* !CONFIG_DISCONTIGMEM */
-	for (pfn = 0; pfn < max_pfn; pfn++) {
-		/*
-		 * Only count reserved RAM pages
-		 */
-		if (PageReserved(pfn_to_page(pfn)))
-			reservedpages++;
-	}
-#endif
-}
-
 #ifdef CONFIG_PA11
 	if (hppa_dma_ops == &pcxl_dma_ops) {
 		pcxl_dma_start = (unsigned long)SET_MAP_OFFSET(MAP_START);
@@ -643,15 +611,7 @@ void __init mem_init(void)
 	parisc_vmalloc_start = SET_MAP_OFFSET(MAP_START);
 #endif
 
-	printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, %dk reserved, %dk data, %dk init)\n",
-		nr_free_pages() << (PAGE_SHIFT-10),
-		num_physpages << (PAGE_SHIFT-10),
-		codesize >> 10,
-		reservedpages << (PAGE_SHIFT-10),
-		datasize >> 10,
-		initsize >> 10
-	);

WARNING: multiple messages have this Message-ID (diff)
From: Jiang Liu <liuj97@gmail.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiang Liu <jiang.liu@huawei.com>,
	David Rientjes <rientjes@google.com>,
	Wen Congyang <wency@cn.fujitsu.com>, Mel Gorman <mgorman@suse.de>,
	Minchan Kim <minchan@kernel.org>,
	KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>,
	Michal Hocko <mhocko@suse.cz>,
	James Bottomley <James.Bottomley@HansenPartnership.com>,
	Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>,
	David Howells <dhowells@redhat.com>,
	Mark Salter <msalter@redhat.com>,
	Jianguo Wu <wujianguo@huawei.com>,
	linux-mm@kvack.org, linux-arch@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	"James E.J. Bottomley" <jejb@parisc-linux.org>,
	Helge Deller <deller@gmx.de>,
	Thomas Gleixner <tglx@linutronix.de>,
	linux-parisc@vger.kernel.org
Subject: [PATCH v4, part3 30/41] mm/PARISC: prepare for removing num_physpages and simplify mem_init()
Date: Sat,  6 Apr 2013 22:32:29 +0800	[thread overview]
Message-ID: <1365258760-30821-31-git-send-email-jiang.liu@huawei.com> (raw)
Message-ID: <20130406143229.AOsO0Lty6w9hJUE0lDPq9IkqsKhai-7it2mQA8bZlIc@z> (raw)
In-Reply-To: <1365258760-30821-1-git-send-email-jiang.liu@huawei.com>

Prepare for removing num_physpages and simplify mem_init().

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: linux-parisc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
 arch/parisc/mm/init.c |   46 +++-------------------------------------------
 1 file changed, 3 insertions(+), 43 deletions(-)

diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 1fe9d841..f80c175 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -214,7 +214,6 @@ static void __init setup_bootmem(void)
 	mem_limit_func();       /* check for "mem=" argument */
 
 	mem_max = 0;
-	num_physpages = 0;
 	for (i = 0; i < npmem_ranges; i++) {
 		unsigned long rsize;
 
@@ -229,10 +228,8 @@ static void __init setup_bootmem(void)
 				npmem_ranges = i + 1;
 				mem_max = mem_limit;
 			}
-	        num_physpages += pmem_ranges[i].pages;
 			break;
 		}
-	    num_physpages += pmem_ranges[i].pages;
 		mem_max += rsize;
 	}
 
@@ -532,7 +529,7 @@ void free_initmem(void)
 	 * pages are no-longer executable */
 	flush_icache_range(init_begin, init_end);
 	
-	num_physpages += free_initmem_default(-1);
+	free_initmem_default(-1);
 
 	/* set up a new led state on systems shipped LED State panel */
 	pdc_chassis_send_status(PDC_CHASSIS_DIRECT_BCOMPLETE);
@@ -580,8 +577,6 @@ unsigned long pcxl_dma_start __read_mostly;
 
 void __init mem_init(void)
 {
-	int codesize, reservedpages, datasize, initsize;
-
 	/* Do sanity checks on page table constants */
 	BUILD_BUG_ON(PTE_ENTRY_SIZE != sizeof(pte_t));
 	BUILD_BUG_ON(PMD_ENTRY_SIZE != sizeof(pmd_t));
@@ -603,33 +598,6 @@ void __init mem_init(void)
 	}
 #endif
 
-	codesize = (unsigned long)_etext - (unsigned long)_text;
-	datasize = (unsigned long)_edata - (unsigned long)_etext;
-	initsize = (unsigned long)__init_end - (unsigned long)__init_begin;
-
-	reservedpages = 0;
-{
-	unsigned long pfn;
-#ifdef CONFIG_DISCONTIGMEM
-	int i;
-
-	for (i = 0; i < npmem_ranges; i++) {
-		for (pfn = node_start_pfn(i); pfn < node_end_pfn(i); pfn++) {
-			if (PageReserved(pfn_to_page(pfn)))
-				reservedpages++;
-		}
-	}
-#else /* !CONFIG_DISCONTIGMEM */
-	for (pfn = 0; pfn < max_pfn; pfn++) {
-		/*
-		 * Only count reserved RAM pages
-		 */
-		if (PageReserved(pfn_to_page(pfn)))
-			reservedpages++;
-	}
-#endif
-}
-
 #ifdef CONFIG_PA11
 	if (hppa_dma_ops == &pcxl_dma_ops) {
 		pcxl_dma_start = (unsigned long)SET_MAP_OFFSET(MAP_START);
@@ -643,15 +611,7 @@ void __init mem_init(void)
 	parisc_vmalloc_start = SET_MAP_OFFSET(MAP_START);
 #endif
 
-	printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, %dk reserved, %dk data, %dk init)\n",
-		nr_free_pages() << (PAGE_SHIFT-10),
-		num_physpages << (PAGE_SHIFT-10),
-		codesize >> 10,
-		reservedpages << (PAGE_SHIFT-10),
-		datasize >> 10,
-		initsize >> 10
-	);
-
+	mem_init_print_info(NULL);
 #ifdef CONFIG_DEBUG_KERNEL /* double-sanity-check paranoia */
 	printk("virtual kernel memory layout:\n"
 	       "    vmalloc : 0x%p - 0x%p   (%4ld MB)\n"
@@ -1099,6 +1059,6 @@ void flush_tlb_all(void)
 #ifdef CONFIG_BLK_DEV_INITRD
 void free_initrd_mem(unsigned long start, unsigned long end)
 {
-	num_physpages += free_reserved_area(start, end, -1, "initrd");
+	free_reserved_area(start, end, -1, "initrd");
 }
 #endif
-- 
1.7.9.5


  parent reply	other threads:[~2013-04-06 14:32 UTC|newest]

Thread overview: 88+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-04-06 14:31 [PATCH v4, part3 00/41] Simplify mem_init() implementations and kill num_physpages Jiang Liu
2013-04-06 14:31 ` Jiang Liu
2013-04-06 14:32 ` [PATCH v4, part3 01/41] vmlinux.lds: add comments for global variables and clean up useless declarations Jiang Liu
2013-04-06 14:32 ` [PATCH v4, part3 02/41] avr32: normalize global variables exported by vmlinux.lds Jiang Liu
2013-04-06 14:32   ` Jiang Liu
2013-04-07  8:00   ` Hans-Christian Egtvedt
2013-04-07  8:00     ` Hans-Christian Egtvedt
2013-04-06 14:32 ` [PATCH v4, part3 03/41] c6x: " Jiang Liu
2013-04-06 14:32   ` Jiang Liu
2013-04-06 14:32 ` [PATCH v4, part3 04/41] h8300: " Jiang Liu
2013-04-06 14:32   ` Jiang Liu
2013-04-06 14:32 ` [PATCH v4, part3 05/41] score: " Jiang Liu
2013-04-06 14:32   ` Jiang Liu
2013-04-06 14:32 ` [PATCH v4, part3 06/41] tile: " Jiang Liu
2013-04-06 14:32   ` Jiang Liu
2013-04-12 20:54   ` Chris Metcalf
2013-04-06 14:32 ` [PATCH v4, part3 07/41] UML: " Jiang Liu
2013-04-06 14:32   ` Jiang Liu
2013-04-06 14:32 ` [PATCH v4, part3 08/41] mm: introduce helper function mem_init_print_info() to simplify mem_init() Jiang Liu
2013-04-06 14:32   ` Jiang Liu
2013-04-06 14:32 ` [PATCH v4, part3 09/41] mm: use totalram_pages instead of num_physpages at runtime Jiang Liu
2013-04-06 14:32 ` [PATCH v4, part3 10/41] mm/hotplug: prepare for removing num_physpages Jiang Liu
2013-04-06 14:32 ` [PATCH v4, part3 11/41] mm/alpha: prepare for removing num_physpages and simplify mem_init() Jiang Liu
2013-04-06 14:32   ` Jiang Liu
2013-04-06 14:32 ` [PATCH v4, part3 12/41] mm/ARC: " Jiang Liu
2013-04-06 14:32   ` Jiang Liu
2013-04-06 14:32 ` [PATCH v4, part3 13/41] mm/ARM: " Jiang Liu
2013-04-06 14:32   ` Jiang Liu
2013-04-19 16:54   ` Russell King - ARM Linux
2013-04-20 15:19     ` Jiang Liu
2013-04-20 15:19       ` Jiang Liu
2013-04-06 14:32 ` [PATCH v4, part3 14/41] mm/ARM64: " Jiang Liu
2013-04-06 14:32   ` Jiang Liu
2013-04-06 14:32 ` [PATCH v4, part3 15/41] mm/AVR32: " Jiang Liu
2013-04-06 14:32   ` Jiang Liu
2013-04-07  7:59   ` Hans-Christian Egtvedt
2013-04-07  7:59     ` Hans-Christian Egtvedt
2013-04-06 14:32 ` [PATCH v4, part3 16/41] mm/blackfin: " Jiang Liu
2013-04-06 14:32   ` Jiang Liu
2013-04-06 14:32 ` [PATCH v4, part3 17/41] mm/c6x: " Jiang Liu
2013-04-06 14:32   ` Jiang Liu
2013-04-06 14:32 ` [PATCH v4, part3 18/41] mm/cris: " Jiang Liu
2013-04-06 14:32   ` Jiang Liu
2013-04-08  9:52   ` Jesper Nilsson
2013-04-06 14:32 ` [PATCH v4, part3 19/41] mm/frv: " Jiang Liu
2013-04-06 14:32   ` Jiang Liu
2013-04-06 14:32 ` [PATCH v4, part3 20/41] mm/h8300: " Jiang Liu
2013-04-06 14:32   ` Jiang Liu
2013-04-06 14:32 ` [PATCH v4, part3 21/41] mm/hexagon: " Jiang Liu
2013-04-06 14:32   ` Jiang Liu
2013-04-06 14:32 ` [PATCH v4, part3 22/41] mm/IA64: " Jiang Liu
2013-04-06 14:32   ` Jiang Liu
2013-04-06 14:32 ` [PATCH v4, part3 23/41] mm/m32r: " Jiang Liu
2013-04-06 14:32 ` [PATCH v4, part3 24/41] mm/m68k: " Jiang Liu
2013-04-06 14:32   ` Jiang Liu
2013-04-08  1:34   ` Greg Ungerer
2013-04-08  1:34     ` Greg Ungerer
2013-04-06 14:32 ` [PATCH v4, part3 25/41] mm/metag: " Jiang Liu
2013-04-06 14:32   ` Jiang Liu
2013-04-06 14:32 ` [PATCH v4, part3 26/41] mm/microblaze: " Jiang Liu
2013-04-06 14:32   ` Jiang Liu
2013-04-06 14:32 ` [PATCH v4, part3 27/41] mm/MIPS: " Jiang Liu
2013-04-06 14:32   ` Jiang Liu
2013-04-06 14:32 ` [PATCH v4, part3 28/41] mm/mn10300: " Jiang Liu
2013-04-06 14:32   ` Jiang Liu
2013-04-06 14:32 ` [PATCH v4, part3 29/41] mm/openrisc: " Jiang Liu
2013-04-06 14:32   ` Jiang Liu
2013-04-06 14:32 ` Jiang Liu [this message]
2013-04-06 14:32   ` [PATCH v4, part3 30/41] mm/PARISC: " Jiang Liu
2013-04-06 14:32 ` [PATCH v4, part3 31/41] mm/ppc: " Jiang Liu
2013-04-06 14:32   ` Jiang Liu
2013-04-06 14:32 ` [PATCH v4, part3 32/41] mm/s390: " Jiang Liu
2013-04-06 14:32 ` [PATCH v4, part3 33/41] mm/score: " Jiang Liu
2013-04-06 14:32 ` [PATCH v4, part3 34/41] mm/SH: " Jiang Liu
2013-04-06 14:32   ` Jiang Liu
2013-04-06 14:32 ` [PATCH v4, part3 35/41] mm/SPARC: " Jiang Liu
2013-04-06 14:32 ` [PATCH v4, part3 36/41] mm/tile: " Jiang Liu
2013-04-06 14:32   ` Jiang Liu
2013-04-12 20:56   ` Chris Metcalf
2013-04-06 14:32 ` [PATCH v4, part3 37/41] mm/um: " Jiang Liu
2013-04-06 14:32   ` Jiang Liu
2013-04-06 14:32 ` [PATCH v4, part3 38/41] mm/unicore32: " Jiang Liu
2013-04-06 14:32   ` Jiang Liu
2013-04-06 14:32 ` [PATCH v4, part3 39/41] mm/x86: " Jiang Liu
2013-04-06 14:32   ` Jiang Liu
2013-04-06 14:32 ` [PATCH v4, part3 40/41] mm/xtensa: " Jiang Liu
2013-04-06 14:32   ` Jiang Liu
2013-04-06 14:32 ` [PATCH v4, part3 41/41] mm: kill global variable num_physpages Jiang Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1365258760-30821-31-git-send-email-jiang.liu@huawei.com \
    --to=liuj97@gmail.com \
    --cc=James.Bottomley@HansenPartnership.com \
    --cc=akpm@linux-foundation.org \
    --cc=deller@gmx.de \
    --cc=dhowells@redhat.com \
    --cc=jejb@parisc-linux.org \
    --cc=jiang.liu@huawei.com \
    --cc=kamezawa.hiroyu@jp.fujitsu.com \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linux-parisc@vger.kernel.org \
    --cc=mgorman@suse.de \
    --cc=mhocko@suse.cz \
    --cc=minchan@kernel.org \
    --cc=msalter@redhat.com \
    --cc=rientjes@google.com \
    --cc=sergei.shtylyov@cogentembedded.com \
    --cc=tglx@linutronix.de \
    --cc=wency@cn.fujitsu.com \
    --cc=wujianguo@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).