From: Jiang Liu <liuj97@gmail.com> To: Andrew Morton <akpm@linux-foundation.org> Cc: Jiang Liu <jiang.liu@huawei.com>, David Rientjes <rientjes@google.com>, Wen Congyang <wency@cn.fujitsu.com>, Mel Gorman <mgorman@suse.de>, Minchan Kim <minchan@kernel.org>, KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>, Michal Hocko <mhocko@suse.cz>, James Bottomley <James.Bottomley@HansenPartnership.com>, Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>, David Howells <dhowells@redhat.com>, Mark Salter <msalter@redhat.com>, Jianguo Wu <wujianguo@huawei.com>, linux-mm@kvack.org, linux-arch@vger.kernel.org, linux-kernel@vger.kernel.org, Thomas Gleixner <tglx@linutronix.de>, Ingo Molnar <mingo@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>, x86@kernel.org, Yinghai Lu <yinghai@kernel.org>, Tang Chen <tangchen@cn.fujitsu.com> Subject: [PATCH v8, part3 04/14] mm/x86: use free_reserved_area() to simplify code Date: Sun, 26 May 2013 21:38:32 +0800 [thread overview] Message-ID: <1369575522-26405-5-git-send-email-jiang.liu@huawei.com> (raw) In-Reply-To: <1369575522-26405-1-git-send-email-jiang.liu@huawei.com> Use common help function free_reserved_area() to simplify code. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: linux-kernel@vger.kernel.org --- arch/x86/mm/init.c | 14 +++----------- arch/x86/mm/init_64.c | 5 ++--- 2 files changed, 5 insertions(+), 14 deletions(-) diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index eaac174..62f1473 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -494,7 +494,6 @@ int devmem_is_allowed(unsigned long pagenr) void free_init_pages(char *what, unsigned long begin, unsigned long end) { - unsigned long addr; unsigned long begin_aligned, end_aligned; /* Make sure boundaries are page aligned */ @@ -509,8 +508,6 @@ void free_init_pages(char *what, unsigned long begin, unsigned long end) if (begin >= end) return; - addr = begin; - /* * If debugging page accesses then do not free this memory but * mark them not present - any buggy init-section access will @@ -529,18 +526,13 @@ void free_init_pages(char *what, unsigned long begin, unsigned long end) set_memory_nx(begin, (end - begin) >> PAGE_SHIFT); set_memory_rw(begin, (end - begin) >> PAGE_SHIFT); - printk(KERN_INFO "Freeing %s: %luk freed\n", what, (end - begin) >> 10); - - for (; addr < end; addr += PAGE_SIZE) { - memset((void *)addr, POISON_FREE_INITMEM, PAGE_SIZE); - free_reserved_page(virt_to_page(addr)); - } + free_reserved_area((void *)begin, (void *)end, POISON_FREE_INITMEM, what); #endif } void free_initmem(void) { - free_init_pages("unused kernel memory", + free_init_pages("unused kernel", (unsigned long)(&__init_begin), (unsigned long)(&__init_end)); } @@ -566,7 +558,7 @@ void __init free_initrd_mem(unsigned long start, unsigned long end) * - relocate_initrd() * So here We can do PAGE_ALIGN() safely to get partial page to be freed */ - free_init_pages("initrd memory", start, PAGE_ALIGN(end)); + free_init_pages("initrd", start, PAGE_ALIGN(end)); } #endif diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index bb00c46..32e2f25 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -1166,11 +1166,10 @@ void mark_rodata_ro(void) set_memory_ro(start, (end-start) >> PAGE_SHIFT); #endif - free_init_pages("unused kernel memory", + free_init_pages("unused kernel", (unsigned long) __va(__pa_symbol(text_end)), (unsigned long) __va(__pa_symbol(rodata_start))); - - free_init_pages("unused kernel memory", + free_init_pages("unused kernel", (unsigned long) __va(__pa_symbol(rodata_end)), (unsigned long) __va(__pa_symbol(_sdata))); } -- 1.8.1.2 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to majordomo@kvack.org. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
WARNING: multiple messages have this Message-ID (diff)
From: Jiang Liu <liuj97@gmail.com> To: Andrew Morton <akpm@linux-foundation.org> Cc: Jiang Liu <jiang.liu@huawei.com>, David Rientjes <rientjes@google.com>, Wen Congyang <wency@cn.fujitsu.com>, Mel Gorman <mgorman@suse.de>, Minchan Kim <minchan@kernel.org>, KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>, Michal Hocko <mhocko@suse.cz>, James Bottomley <James.Bottomley@HansenPartnership.com>, Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>, David Howells <dhowells@redhat.com>, Mark Salter <msalter@redhat.com>, Jianguo Wu <wujianguo@huawei.com>, linux-mm@kvack.org, linux-arch@vger.kernel.org, linux-kernel@vger.kernel.org, Thomas Gleixner <tglx@linutronix.de>, Ingo Molnar <mingo@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>, x86@kernel.org, Yinghai Lu <yinghai@kernel.org>, Tang Chen <tangchen@cn.fujitsu.com> Subject: [PATCH v8, part3 04/14] mm/x86: use free_reserved_area() to simplify code Date: Sun, 26 May 2013 21:38:32 +0800 [thread overview] Message-ID: <1369575522-26405-5-git-send-email-jiang.liu@huawei.com> (raw) Message-ID: <20130526133832.DI9LiaQAzMg4e-gbXMO6Npda7RYd-axQjzOfMMDaHH0@z> (raw) In-Reply-To: <1369575522-26405-1-git-send-email-jiang.liu@huawei.com> Use common help function free_reserved_area() to simplify code. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: linux-kernel@vger.kernel.org --- arch/x86/mm/init.c | 14 +++----------- arch/x86/mm/init_64.c | 5 ++--- 2 files changed, 5 insertions(+), 14 deletions(-) diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index eaac174..62f1473 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -494,7 +494,6 @@ int devmem_is_allowed(unsigned long pagenr) void free_init_pages(char *what, unsigned long begin, unsigned long end) { - unsigned long addr; unsigned long begin_aligned, end_aligned; /* Make sure boundaries are page aligned */ @@ -509,8 +508,6 @@ void free_init_pages(char *what, unsigned long begin, unsigned long end) if (begin >= end) return; - addr = begin; - /* * If debugging page accesses then do not free this memory but * mark them not present - any buggy init-section access will @@ -529,18 +526,13 @@ void free_init_pages(char *what, unsigned long begin, unsigned long end) set_memory_nx(begin, (end - begin) >> PAGE_SHIFT); set_memory_rw(begin, (end - begin) >> PAGE_SHIFT); - printk(KERN_INFO "Freeing %s: %luk freed\n", what, (end - begin) >> 10); - - for (; addr < end; addr += PAGE_SIZE) { - memset((void *)addr, POISON_FREE_INITMEM, PAGE_SIZE); - free_reserved_page(virt_to_page(addr)); - } + free_reserved_area((void *)begin, (void *)end, POISON_FREE_INITMEM, what); #endif } void free_initmem(void) { - free_init_pages("unused kernel memory", + free_init_pages("unused kernel", (unsigned long)(&__init_begin), (unsigned long)(&__init_end)); } @@ -566,7 +558,7 @@ void __init free_initrd_mem(unsigned long start, unsigned long end) * - relocate_initrd() * So here We can do PAGE_ALIGN() safely to get partial page to be freed */ - free_init_pages("initrd memory", start, PAGE_ALIGN(end)); + free_init_pages("initrd", start, PAGE_ALIGN(end)); } #endif diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index bb00c46..32e2f25 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -1166,11 +1166,10 @@ void mark_rodata_ro(void) set_memory_ro(start, (end-start) >> PAGE_SHIFT); #endif - free_init_pages("unused kernel memory", + free_init_pages("unused kernel", (unsigned long) __va(__pa_symbol(text_end)), (unsigned long) __va(__pa_symbol(rodata_start))); - - free_init_pages("unused kernel memory", + free_init_pages("unused kernel", (unsigned long) __va(__pa_symbol(rodata_end)), (unsigned long) __va(__pa_symbol(_sdata))); } -- 1.8.1.2
next prev parent reply other threads:[~2013-05-26 13:38 UTC|newest] Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top 2013-05-26 13:38 [PATCH v8, part3 00/14] accurately calculate memory statisitic information Jiang Liu 2013-05-26 13:38 ` [PATCH v8, part3 01/14] mm: change signature of free_reserved_area() to fix building warnings Jiang Liu 2013-05-26 13:38 ` Jiang Liu 2013-05-26 13:38 ` [PATCH v8, part3 02/14] mm: enhance free_reserved_area() to support poisoning memory with zero Jiang Liu 2013-05-26 13:38 ` Jiang Liu 2013-05-29 8:51 ` Vineet Gupta 2013-05-29 8:51 ` Vineet Gupta 2013-05-26 13:38 ` [PATCH v8, part3 03/14] mm/ARM64: kill poison_init_mem() Jiang Liu 2013-05-26 13:38 ` Jiang Liu 2013-05-28 13:43 ` Catalin Marinas 2013-05-28 13:43 ` Catalin Marinas 2013-05-26 13:38 ` Jiang Liu [this message] 2013-05-26 13:38 ` [PATCH v8, part3 04/14] mm/x86: use free_reserved_area() to simplify code Jiang Liu 2013-05-26 13:38 ` [PATCH v8, part3 05/14] mm/tile: use common help functions to free reserved pages Jiang Liu 2013-05-26 13:38 ` Jiang Liu 2013-05-26 13:38 ` [PATCH v8, part3 06/14] mm, acornfb: use free_reserved_area() to simplify code Jiang Liu 2013-05-26 13:38 ` Jiang Liu 2013-05-30 21:58 ` Andrew Morton 2013-05-30 21:58 ` Andrew Morton 2013-05-31 4:31 ` Jiang Liu 2013-05-31 4:31 ` Jiang Liu 2013-05-26 13:38 ` [PATCH v8, part3 07/14] mm: fix some trivial typos in comments Jiang Liu 2013-05-26 13:38 ` Jiang Liu 2013-05-26 13:38 ` [PATCH v8, part3 08/14] mm: use managed_pages to calculate default zonelist order Jiang Liu 2013-05-26 13:38 ` Jiang Liu 2013-05-26 13:38 ` [PATCH v8, part3 09/14] mm: accurately calculate zone->managed_pages for highmem zones Jiang Liu 2013-05-26 13:38 ` Jiang Liu 2013-05-26 13:38 ` [PATCH v8, part3 10/14] mm: use a dedicated lock to protect totalram_pages and zone->managed_pages Jiang Liu 2013-05-26 13:38 ` Jiang Liu 2013-06-11 20:00 ` Andrew Morton 2013-06-11 20:00 ` Andrew Morton 2013-06-12 2:17 ` Jiang Liu 2013-06-12 2:17 ` Jiang Liu 2013-05-26 13:38 ` [PATCH v8, part3 11/14] mm: make __free_pages_bootmem() only available at boot time Jiang Liu 2013-05-26 13:38 ` Jiang Liu 2013-05-26 13:38 ` [PATCH v8, part3 12/14] mm: correctly update zone->mamaged_pages Jiang Liu 2013-05-26 13:38 ` Jiang Liu 2013-05-27 0:52 ` Wanpeng Li 2013-05-27 0:52 ` Wanpeng Li 2013-05-27 0:52 ` Wanpeng Li 2013-05-27 13:57 ` Sergei Shtylyov 2013-05-27 13:57 ` Sergei Shtylyov 2013-05-28 14:20 ` Liu Jiang 2013-05-28 14:20 ` Liu Jiang 2013-05-26 13:38 ` [PATCH v8, part3 13/14] mm: concentrate modification of totalram_pages into the mm core Jiang Liu 2013-05-26 13:38 ` Jiang Liu 2013-05-26 13:38 ` [PATCH v8, part3 14/14] mm: report available pages as "MemTotal" for each NUMA node Jiang Liu 2013-05-26 13:38 ` Jiang Liu
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1369575522-26405-5-git-send-email-jiang.liu@huawei.com \ --to=liuj97@gmail.com \ --cc=James.Bottomley@HansenPartnership.com \ --cc=akpm@linux-foundation.org \ --cc=dhowells@redhat.com \ --cc=hpa@zytor.com \ --cc=jiang.liu@huawei.com \ --cc=kamezawa.hiroyu@jp.fujitsu.com \ --cc=linux-arch@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mm@kvack.org \ --cc=mgorman@suse.de \ --cc=mhocko@suse.cz \ --cc=minchan@kernel.org \ --cc=mingo@redhat.com \ --cc=msalter@redhat.com \ --cc=rientjes@google.com \ --cc=sergei.shtylyov@cogentembedded.com \ --cc=tangchen@cn.fujitsu.com \ --cc=tglx@linutronix.de \ --cc=wency@cn.fujitsu.com \ --cc=wujianguo@huawei.com \ --cc=x86@kernel.org \ --cc=yinghai@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).