From: Yoshinori Sato <ysato-Rn4VEauK+AKRv+LV9MX5uooqe+aC9MnS@public.gmane.org>
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arch-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Yoshinori Sato <ysato-Rn4VEauK+AKRv+LV9MX5uooqe+aC9MnS@public.gmane.org>
Subject: [PATCH v12 21/21] h8300: devicetree source
Date: Mon, 11 May 2015 15:26:40 +0900 [thread overview]
Message-ID: <1431325600-12333-22-git-send-email-ysato@users.sourceforge.jp> (raw)
In-Reply-To: <1431325600-12333-1-git-send-email-ysato-Rn4VEauK+AKRv+LV9MX5uooqe+aC9MnS@public.gmane.org>
- h8300h_sim: GDB H8/300H simulator
- h8s_sim: GDB H8S simulator
- edosk2674: Renesas EDOSK2674R Evalution board
Signed-off-by: Yoshinori Sato <ysato-Rn4VEauK+AKRv+LV9MX5uooqe+aC9MnS@public.gmane.org>
---
arch/h8300/boot/dts/Makefile | 11 ++++
arch/h8300/boot/dts/edosk2674.dts | 107 +++++++++++++++++++++++++++++++++++++
arch/h8300/boot/dts/h8300h_sim.dts | 96 +++++++++++++++++++++++++++++++++
arch/h8300/boot/dts/h8s_sim.dts | 99 ++++++++++++++++++++++++++++++++++
4 files changed, 313 insertions(+)
create mode 100644 arch/h8300/boot/dts/Makefile
create mode 100644 arch/h8300/boot/dts/edosk2674.dts
create mode 100644 arch/h8300/boot/dts/h8300h_sim.dts
create mode 100644 arch/h8300/boot/dts/h8s_sim.dts
diff --git a/arch/h8300/boot/dts/Makefile b/arch/h8300/boot/dts/Makefile
new file mode 100644
index 0000000..bb123fa
--- /dev/null
+++ b/arch/h8300/boot/dts/Makefile
@@ -0,0 +1,11 @@
+ifneq '$(CONFIG_H8300_BUILTIN_DTB)' '""'
+BUILTIN_DTB := $(patsubst "%",%,$(CONFIG_H8300_BUILTIN_DTB)).dtb.o
+endif
+
+obj-y += $(BUILTIN_DTB)
+
+dtb-$(CONFIG_H8300H_SIM) := h8300h_sim.dtb
+dtb-$(CONFIG_H8S_SIM) := h8s_sim.dtb
+dtb-$(CONFIG_EDOSK2674) := edosk2674.dtb
+
+clean-files := *.dtb.S
diff --git a/arch/h8300/boot/dts/edosk2674.dts b/arch/h8300/boot/dts/edosk2674.dts
new file mode 100644
index 0000000..dfb5c10
--- /dev/null
+++ b/arch/h8300/boot/dts/edosk2674.dts
@@ -0,0 +1,107 @@
+/dts-v1/;
+/ {
+ compatible = "renesas,edosk2674";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&h8intc>;
+
+ chosen {
+ bootargs = "console=ttySC2,38400";
+ stdout-path = <&sci2>;
+ };
+ aliases {
+ serial0 = &sci0;
+ serial1 = &sci1;
+ serial2 = &sci2;
+ };
+
+ xclk: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <33333333>;
+ clock-output-names = "xtal";
+ };
+ pllclk: pllclk {
+ compatible = "renesas,h8s2678-pll-clock";
+ clocks = <&xclk>;
+ #clock-cells = <0>;
+ reg = <0xfee03b 2>, <0xfee045 2>;
+ };
+ core_clk: core_clk {
+ compatible = "renesas,h8300-div-clock";
+ clocks = <&pllclk>;
+ #clock-cells = <0>;
+ reg = <0xfee03b 2>;
+ renesas,width = <3>;
+ };
+ fclk: fclk {
+ compatible = "fixed-factor-clock";
+ clocks = <&core_clk>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+
+ memory@400000 {
+ device_type = "memory";
+ reg = <0x400000 0x800000>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ compatible = "renesas,h8300";
+ clock-frequency = <33333333>;
+ };
+ };
+
+ h8intc: interrupt-controller@fffe00 {
+ compatible = "renesas,h8s-intc", "renesas,h8300-intc";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0xfffe00 24>;
+ };
+
+ bsc: memory-controller@fffec0 {
+ compatible = "renesas,h8s-bsc", "renesas,h8300-bsc";
+ reg = <0xfffec0 24>;
+ };
+
+ tpu: timer@ffffe0 {
+ compatible = "renesas,tpu";
+ reg = <0xffffe0 16>, <0xfffff0 12>;
+ clocks = <&fclk>;
+ clock-names = "fck";
+ };
+
+ timer8: timer@ffffb0 {
+ compatible = "renesas,8bit-timer";
+ reg = <0xffffb0 10>;
+ interrupts = <72 0>;
+ clocks = <&fclk>;
+ clock-names = "fck";
+ };
+
+ sci0: serial@ffff78 {
+ compatible = "renesas,sci";
+ reg = <0xffff78 8>;
+ interrupts = <88 0>, <89 0>, <90 0>, <91 0>;
+ clocks = <&fclk>;
+ clock-names = "sci_ick";
+ };
+ sci1: serial@ffff80 {
+ compatible = "renesas,sci";
+ reg = <0xffff80 8>;
+ interrupts = <92 0>, <93 0>, <94 0>, <95 0>;
+ clocks = <&fclk>;
+ clock-names = "sci_ick";
+ };
+ sci2: serial@ffff88 {
+ compatible = "renesas,sci";
+ reg = <0xffff88 8>;
+ interrupts = <96 0>, <97 0>, <98 0>, <99 0>;
+ clocks = <&fclk>;
+ clock-names = "sci_ick";
+ };
+};
diff --git a/arch/h8300/boot/dts/h8300h_sim.dts b/arch/h8300/boot/dts/h8300h_sim.dts
new file mode 100644
index 0000000..545bfb5
--- /dev/null
+++ b/arch/h8300/boot/dts/h8300h_sim.dts
@@ -0,0 +1,96 @@
+/dts-v1/;
+/ {
+ compatible = "gnu,gdbsim";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&h8intc>;
+
+ chosen {
+ bootargs = "earlyprintk=h8300-sim";
+ stdout-path = <&sci0>;
+ };
+ aliases {
+ serial0 = &sci0;
+ serial1 = &sci1;
+ };
+
+ xclk: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <20000000>;
+ clock-output-names = "xtal";
+ };
+ core_clk: core_clk {
+ compatible = "renesas,h8300-div-clock";
+ clocks = <&xclk>;
+ #clock-cells = <0>;
+ reg = <0xfee01b 2>;
+ renesas,width = <2>;
+ };
+ fclk: fclk {
+ compatible = "fixed-factor-clock";
+ clocks = <&core_clk>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+
+ memory@400000 {
+ device_type = "memory";
+ reg = <0x400000 0x400000>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ compatible = "renesas,h8300";
+ clock-frequency = <20000000>;
+ };
+ };
+
+ h8intc: interrupt-controller@fee012 {
+ compatible = "renesas,h8300h-intc", "renesas,h8300-intc";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0xfee012 7>;
+ };
+
+ bsc: memory-controller@fee01e {
+ compatible = "renesas,h8300h-bsc", "renesas,h8300-bsc";
+ reg = <0xfee01e 8>;
+ };
+
+ timer8: timer@ffff80 {
+ compatible = "renesas,8bit-timer";
+ reg = <0xffff80 10>;
+ interrupts = <36 0>;
+ clocks = <&fclk>;
+ clock-names = "fck";
+ };
+
+ timer16: timer@ffff68 {
+ compatible = "renesas,16bit-timer";
+ reg = <0xffff68 8>, <0xffff60 8>;
+ interrupts = <24 0>;
+ renesas,channel = <0>;
+ clocks = <&fclk>;
+ clock-names = "fck";
+ };
+
+ sci0: serial@ffffb0 {
+ compatible = "renesas,sci";
+ reg = <0xffffb0 8>;
+ interrupts = <52 0>, <53 0>, <54 0>, <55 0>;
+ clocks = <&fclk>;
+ clock-names = "sci_ick";
+ };
+
+ sci1: serial@ffffb8 {
+ compatible = "renesas,sci";
+ reg = <0xffffb8 8>;
+ interrupts = <56 0>, <57 0>, <58 0>, <59 0>;
+ clocks = <&fclk>;
+ clock-names = "sci_ick";
+ };
+};
diff --git a/arch/h8300/boot/dts/h8s_sim.dts b/arch/h8300/boot/dts/h8s_sim.dts
new file mode 100644
index 0000000..bcedba5
--- /dev/null
+++ b/arch/h8300/boot/dts/h8s_sim.dts
@@ -0,0 +1,99 @@
+/dts-v1/;
+/ {
+ compatible = "gnu,gdbsim";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&h8intc>;
+
+ chosen {
+ bootargs = "earlyprintk=h8300-sim";
+ stdout-path = <&sci0>;
+ };
+ aliases {
+ serial0 = &sci0;
+ serial1 = &sci1;
+ };
+
+ xclk: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <33333333>;
+ clock-output-names = "xtal";
+ };
+ pllclk: pllclk {
+ compatible = "renesas,h8s2678-pll-clock";
+ clocks = <&xclk>;
+ #clock-cells = <0>;
+ reg = <0xfee03b 2>, <0xfee045 2>;
+ };
+ core_clk: core_clk {
+ compatible = "renesas,h8300-div-clock";
+ clocks = <&pllclk>;
+ #clock-cells = <0>;
+ reg = <0xfee03b 2>;
+ renesas,width = <3>;
+ };
+ fclk: fclk {
+ compatible = "fixed-factor-clock";
+ clocks = <&core_clk>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+
+ memory@400000 {
+ device_type = "memory";
+ reg = <0x400000 0x800000>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ compatible = "renesas,h8300";
+ clock-frequency = <33333333>;
+ };
+ };
+
+ h8intc: interrupt-controller@fffe00 {
+ compatible = "renesas,h8s-intc", "renesas,h8300-intc";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0xfffe00 24>;
+ };
+
+ bsc: memory-controller@fffec0 {
+ compatible = "renesas,h8s-bsc", "renesas,h8300-bsc";
+ reg = <0xfffec0 24>;
+ };
+
+ tpu: timer@ffffe0 {
+ compatible = "renesas,tpu";
+ reg = <0xffffe0 16>, <0xfffff0 12>;
+ clocks = <&fclk>;
+ clock-names = "fck";
+ };
+
+ timer8: timer@ffffb0 {
+ compatible = "renesas,8bit-timer";
+ reg = <0xffffb0 10>;
+ interrupts = <72 0>;
+ clocks = <&fclk>;
+ clock-names = "fck";
+ };
+
+ sci0: serial@ffff78 {
+ compatible = "renesas,sci";
+ reg = <0xffff78 8>;
+ interrupts = <88 0>, <89 0>, <90 0>, <91 0>;
+ clocks = <&fclk>;
+ clock-names = "sci_ick";
+ };
+ sci1: serial@ffff80 {
+ compatible = "renesas,sci";
+ reg = <0xffff80 8>;
+ interrupts = <92 0>, <93 0>, <94 0>, <95 0>;
+ clocks = <&fclk>;
+ clock-names = "sci_ick";
+ };
+};
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Yoshinori Sato <ysato@users.sourceforge.jp>
To: linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org,
devicetree@vger.kernel.org
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Subject: [PATCH v12 21/21] h8300: devicetree source
Date: Mon, 11 May 2015 15:26:40 +0900 [thread overview]
Message-ID: <1431325600-12333-22-git-send-email-ysato@users.sourceforge.jp> (raw)
Message-ID: <20150511062640.K_P70JS8m6HNhuBwPeeU8_r0MQ-3EZFlmeZntAHSxWw@z> (raw)
In-Reply-To: <1431325600-12333-1-git-send-email-ysato@users.sourceforge.jp>
- h8300h_sim: GDB H8/300H simulator
- h8s_sim: GDB H8S simulator
- edosk2674: Renesas EDOSK2674R Evalution board
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
arch/h8300/boot/dts/Makefile | 11 ++++
arch/h8300/boot/dts/edosk2674.dts | 107 +++++++++++++++++++++++++++++++++++++
arch/h8300/boot/dts/h8300h_sim.dts | 96 +++++++++++++++++++++++++++++++++
arch/h8300/boot/dts/h8s_sim.dts | 99 ++++++++++++++++++++++++++++++++++
4 files changed, 313 insertions(+)
create mode 100644 arch/h8300/boot/dts/Makefile
create mode 100644 arch/h8300/boot/dts/edosk2674.dts
create mode 100644 arch/h8300/boot/dts/h8300h_sim.dts
create mode 100644 arch/h8300/boot/dts/h8s_sim.dts
diff --git a/arch/h8300/boot/dts/Makefile b/arch/h8300/boot/dts/Makefile
new file mode 100644
index 0000000..bb123fa
--- /dev/null
+++ b/arch/h8300/boot/dts/Makefile
@@ -0,0 +1,11 @@
+ifneq '$(CONFIG_H8300_BUILTIN_DTB)' '""'
+BUILTIN_DTB := $(patsubst "%",%,$(CONFIG_H8300_BUILTIN_DTB)).dtb.o
+endif
+
+obj-y += $(BUILTIN_DTB)
+
+dtb-$(CONFIG_H8300H_SIM) := h8300h_sim.dtb
+dtb-$(CONFIG_H8S_SIM) := h8s_sim.dtb
+dtb-$(CONFIG_EDOSK2674) := edosk2674.dtb
+
+clean-files := *.dtb.S
diff --git a/arch/h8300/boot/dts/edosk2674.dts b/arch/h8300/boot/dts/edosk2674.dts
new file mode 100644
index 0000000..dfb5c10
--- /dev/null
+++ b/arch/h8300/boot/dts/edosk2674.dts
@@ -0,0 +1,107 @@
+/dts-v1/;
+/ {
+ compatible = "renesas,edosk2674";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&h8intc>;
+
+ chosen {
+ bootargs = "console=ttySC2,38400";
+ stdout-path = <&sci2>;
+ };
+ aliases {
+ serial0 = &sci0;
+ serial1 = &sci1;
+ serial2 = &sci2;
+ };
+
+ xclk: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <33333333>;
+ clock-output-names = "xtal";
+ };
+ pllclk: pllclk {
+ compatible = "renesas,h8s2678-pll-clock";
+ clocks = <&xclk>;
+ #clock-cells = <0>;
+ reg = <0xfee03b 2>, <0xfee045 2>;
+ };
+ core_clk: core_clk {
+ compatible = "renesas,h8300-div-clock";
+ clocks = <&pllclk>;
+ #clock-cells = <0>;
+ reg = <0xfee03b 2>;
+ renesas,width = <3>;
+ };
+ fclk: fclk {
+ compatible = "fixed-factor-clock";
+ clocks = <&core_clk>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+
+ memory@400000 {
+ device_type = "memory";
+ reg = <0x400000 0x800000>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ compatible = "renesas,h8300";
+ clock-frequency = <33333333>;
+ };
+ };
+
+ h8intc: interrupt-controller@fffe00 {
+ compatible = "renesas,h8s-intc", "renesas,h8300-intc";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0xfffe00 24>;
+ };
+
+ bsc: memory-controller@fffec0 {
+ compatible = "renesas,h8s-bsc", "renesas,h8300-bsc";
+ reg = <0xfffec0 24>;
+ };
+
+ tpu: timer@ffffe0 {
+ compatible = "renesas,tpu";
+ reg = <0xffffe0 16>, <0xfffff0 12>;
+ clocks = <&fclk>;
+ clock-names = "fck";
+ };
+
+ timer8: timer@ffffb0 {
+ compatible = "renesas,8bit-timer";
+ reg = <0xffffb0 10>;
+ interrupts = <72 0>;
+ clocks = <&fclk>;
+ clock-names = "fck";
+ };
+
+ sci0: serial@ffff78 {
+ compatible = "renesas,sci";
+ reg = <0xffff78 8>;
+ interrupts = <88 0>, <89 0>, <90 0>, <91 0>;
+ clocks = <&fclk>;
+ clock-names = "sci_ick";
+ };
+ sci1: serial@ffff80 {
+ compatible = "renesas,sci";
+ reg = <0xffff80 8>;
+ interrupts = <92 0>, <93 0>, <94 0>, <95 0>;
+ clocks = <&fclk>;
+ clock-names = "sci_ick";
+ };
+ sci2: serial@ffff88 {
+ compatible = "renesas,sci";
+ reg = <0xffff88 8>;
+ interrupts = <96 0>, <97 0>, <98 0>, <99 0>;
+ clocks = <&fclk>;
+ clock-names = "sci_ick";
+ };
+};
diff --git a/arch/h8300/boot/dts/h8300h_sim.dts b/arch/h8300/boot/dts/h8300h_sim.dts
new file mode 100644
index 0000000..545bfb5
--- /dev/null
+++ b/arch/h8300/boot/dts/h8300h_sim.dts
@@ -0,0 +1,96 @@
+/dts-v1/;
+/ {
+ compatible = "gnu,gdbsim";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&h8intc>;
+
+ chosen {
+ bootargs = "earlyprintk=h8300-sim";
+ stdout-path = <&sci0>;
+ };
+ aliases {
+ serial0 = &sci0;
+ serial1 = &sci1;
+ };
+
+ xclk: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <20000000>;
+ clock-output-names = "xtal";
+ };
+ core_clk: core_clk {
+ compatible = "renesas,h8300-div-clock";
+ clocks = <&xclk>;
+ #clock-cells = <0>;
+ reg = <0xfee01b 2>;
+ renesas,width = <2>;
+ };
+ fclk: fclk {
+ compatible = "fixed-factor-clock";
+ clocks = <&core_clk>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+
+ memory@400000 {
+ device_type = "memory";
+ reg = <0x400000 0x400000>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ compatible = "renesas,h8300";
+ clock-frequency = <20000000>;
+ };
+ };
+
+ h8intc: interrupt-controller@fee012 {
+ compatible = "renesas,h8300h-intc", "renesas,h8300-intc";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0xfee012 7>;
+ };
+
+ bsc: memory-controller@fee01e {
+ compatible = "renesas,h8300h-bsc", "renesas,h8300-bsc";
+ reg = <0xfee01e 8>;
+ };
+
+ timer8: timer@ffff80 {
+ compatible = "renesas,8bit-timer";
+ reg = <0xffff80 10>;
+ interrupts = <36 0>;
+ clocks = <&fclk>;
+ clock-names = "fck";
+ };
+
+ timer16: timer@ffff68 {
+ compatible = "renesas,16bit-timer";
+ reg = <0xffff68 8>, <0xffff60 8>;
+ interrupts = <24 0>;
+ renesas,channel = <0>;
+ clocks = <&fclk>;
+ clock-names = "fck";
+ };
+
+ sci0: serial@ffffb0 {
+ compatible = "renesas,sci";
+ reg = <0xffffb0 8>;
+ interrupts = <52 0>, <53 0>, <54 0>, <55 0>;
+ clocks = <&fclk>;
+ clock-names = "sci_ick";
+ };
+
+ sci1: serial@ffffb8 {
+ compatible = "renesas,sci";
+ reg = <0xffffb8 8>;
+ interrupts = <56 0>, <57 0>, <58 0>, <59 0>;
+ clocks = <&fclk>;
+ clock-names = "sci_ick";
+ };
+};
diff --git a/arch/h8300/boot/dts/h8s_sim.dts b/arch/h8300/boot/dts/h8s_sim.dts
new file mode 100644
index 0000000..bcedba5
--- /dev/null
+++ b/arch/h8300/boot/dts/h8s_sim.dts
@@ -0,0 +1,99 @@
+/dts-v1/;
+/ {
+ compatible = "gnu,gdbsim";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&h8intc>;
+
+ chosen {
+ bootargs = "earlyprintk=h8300-sim";
+ stdout-path = <&sci0>;
+ };
+ aliases {
+ serial0 = &sci0;
+ serial1 = &sci1;
+ };
+
+ xclk: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <33333333>;
+ clock-output-names = "xtal";
+ };
+ pllclk: pllclk {
+ compatible = "renesas,h8s2678-pll-clock";
+ clocks = <&xclk>;
+ #clock-cells = <0>;
+ reg = <0xfee03b 2>, <0xfee045 2>;
+ };
+ core_clk: core_clk {
+ compatible = "renesas,h8300-div-clock";
+ clocks = <&pllclk>;
+ #clock-cells = <0>;
+ reg = <0xfee03b 2>;
+ renesas,width = <3>;
+ };
+ fclk: fclk {
+ compatible = "fixed-factor-clock";
+ clocks = <&core_clk>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+
+ memory@400000 {
+ device_type = "memory";
+ reg = <0x400000 0x800000>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ compatible = "renesas,h8300";
+ clock-frequency = <33333333>;
+ };
+ };
+
+ h8intc: interrupt-controller@fffe00 {
+ compatible = "renesas,h8s-intc", "renesas,h8300-intc";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0xfffe00 24>;
+ };
+
+ bsc: memory-controller@fffec0 {
+ compatible = "renesas,h8s-bsc", "renesas,h8300-bsc";
+ reg = <0xfffec0 24>;
+ };
+
+ tpu: timer@ffffe0 {
+ compatible = "renesas,tpu";
+ reg = <0xffffe0 16>, <0xfffff0 12>;
+ clocks = <&fclk>;
+ clock-names = "fck";
+ };
+
+ timer8: timer@ffffb0 {
+ compatible = "renesas,8bit-timer";
+ reg = <0xffffb0 10>;
+ interrupts = <72 0>;
+ clocks = <&fclk>;
+ clock-names = "fck";
+ };
+
+ sci0: serial@ffff78 {
+ compatible = "renesas,sci";
+ reg = <0xffff78 8>;
+ interrupts = <88 0>, <89 0>, <90 0>, <91 0>;
+ clocks = <&fclk>;
+ clock-names = "sci_ick";
+ };
+ sci1: serial@ffff80 {
+ compatible = "renesas,sci";
+ reg = <0xffff80 8>;
+ interrupts = <92 0>, <93 0>, <94 0>, <95 0>;
+ clocks = <&fclk>;
+ clock-names = "sci_ick";
+ };
+};
--
2.1.4
next prev parent reply other threads:[~2015-05-11 6:26 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-11 6:26 [PATCH v12 00/21] Re-introduce h8300 architecture Yoshinori Sato
2015-05-11 6:26 ` Yoshinori Sato
2015-05-11 6:26 ` [PATCH v12 01/21] MAINTAINERS: Add H8/300 entry Yoshinori Sato
2015-05-11 6:26 ` [PATCH v12 02/21] mksysmap: Add h8300 local symbol pattern Yoshinori Sato
2015-05-11 6:26 ` Yoshinori Sato
2015-05-11 6:26 ` [PATCH v12 03/21] Add ELF machine Yoshinori Sato
[not found] ` <1431325600-12333-1-git-send-email-ysato-Rn4VEauK+AKRv+LV9MX5uooqe+aC9MnS@public.gmane.org>
2015-05-11 6:26 ` [PATCH v12 04/21] sh-sci: Add h8300 SCI Yoshinori Sato
2015-05-11 6:26 ` Yoshinori Sato
2015-05-11 6:26 ` Yoshinori Sato [this message]
2015-05-11 6:26 ` [PATCH v12 21/21] h8300: devicetree source Yoshinori Sato
2015-05-11 6:26 ` [PATCH v12 05/21] asm-generic: Add common asm-offsets.h Yoshinori Sato
2015-05-11 6:26 ` Yoshinori Sato
2015-05-11 6:26 ` [PATCH v12 06/21] h8300: Assembly headers Yoshinori Sato
2015-05-11 6:26 ` Yoshinori Sato
2015-05-11 6:26 ` [PATCH v12 07/21] h8300: UAPI headers Yoshinori Sato
2015-05-11 6:26 ` Yoshinori Sato
2015-05-11 6:26 ` [PATCH v12 08/21] h8300: Interrupt and exceptions Yoshinori Sato
2015-05-11 6:26 ` Yoshinori Sato
2015-05-11 6:26 ` [PATCH v12 09/21] h8300: kernel startup Yoshinori Sato
2015-05-11 6:26 ` Yoshinori Sato
2015-05-11 6:26 ` [PATCH v12 10/21] h8300: Low level entry Yoshinori Sato
2015-05-11 6:26 ` Yoshinori Sato
2015-05-11 6:26 ` [PATCH v12 11/21] h8300: compressed image support Yoshinori Sato
2015-05-11 6:26 ` [PATCH v12 12/21] h8300: process helpers Yoshinori Sato
2015-05-11 6:26 ` Yoshinori Sato
2015-05-11 6:26 ` [PATCH v12 13/21] h8300: miscellaneous functions Yoshinori Sato
2015-05-11 6:26 ` [PATCH v12 14/21] h8300: Memory management Yoshinori Sato
2015-05-11 6:26 ` [PATCH v12 15/21] h8300: library functions Yoshinori Sato
2015-05-11 6:26 ` [PATCH v12 16/21] h8300: Build scripts Yoshinori Sato
2015-05-11 6:26 ` [PATCH v12 17/21] h8300: clock driver Yoshinori Sato
2015-05-11 6:26 ` Yoshinori Sato
[not found] ` <1431325600-12333-18-git-send-email-ysato-Rn4VEauK+AKRv+LV9MX5uooqe+aC9MnS@public.gmane.org>
2015-08-08 0:43 ` Michael Turquette
2015-08-08 0:43 ` Michael Turquette
2015-05-11 6:26 ` [PATCH v12 18/21] h8300: clocksource Yoshinori Sato
2015-05-11 6:26 ` [PATCH v12 19/21] h8300: IRQ chip driver Yoshinori Sato
2015-05-11 6:26 ` Yoshinori Sato
2015-05-11 6:26 ` [PATCH v12 20/21] h8300: configs Yoshinori Sato
2015-05-11 6:26 ` Yoshinori Sato
2015-05-11 17:50 ` [PATCH v12 00/21] Re-introduce h8300 architecture Guenter Roeck
2015-05-11 17:50 ` Guenter Roeck
2015-05-11 19:04 ` Arnd Bergmann
2015-05-11 19:04 ` Arnd Bergmann
2015-05-12 6:09 ` Yoshinori Sato
2015-05-12 7:29 ` Arnd Bergmann
2015-05-12 7:29 ` Arnd Bergmann
2015-05-12 4:53 ` Yoshinori Sato
2015-05-12 13:07 ` Guenter Roeck
2015-05-12 15:46 ` Yoshinori Sato
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1431325600-12333-22-git-send-email-ysato@users.sourceforge.jp \
--to=ysato-rn4veauk+akrv+lv9mx5uooqe+ac9mns@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arch-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).