[PATCH v7 0/6] Allow user to request memory to be locked on page fault

[PATCH v7 0/6] Allow user to request memory to be locked on page fault

[Eric B Munson]

mlock() allows a user to control page out of program memory, but this
comes at the cost of faulting in the entire mapping when it is
allocated.  For large mappings where the entire area is not necessary
this is not ideal.  Instead of forcing all locked pages to be present
when they are allocated, this set creates a middle ground.  Pages are
marked to be placed on the unevictable LRU (locked) when they are first
used, but they are not faulted in by the mlock call.

This series introduces a new mlock() system call that takes a flags
argument along with the start address and size.  This flags argument
gives the caller the ability to request memory be locked in the
traditional way, or to be locked after the page is faulted in.  A new
MCL flag is added to mirror the lock on fault behavior from mlock() in
mlockall().

There are two main use cases that this set covers.  The first is the
security focussed mlock case.  A buffer is needed that cannot be written
to swap.  The maximum size is known, but on average the memory used is
significantly less than this maximum.  With lock on fault, the buffer
is guaranteed to never be paged out without consuming the maximum size
every time such a buffer is created.

The second use case is focussed on performance.  Portions of a large
file are needed and we want to keep the used portions in memory once
accessed.  This is the case for large graphical models where the path
through the graph is not known until run time.  The entire graph is
unlikely to be used in a given invocation, but once a node has been
used it needs to stay resident for further processing.  Given these
constraints we have a number of options.  We can potentially waste a
large amount of memory by mlocking the entire region (this can also
cause a significant stall at startup as the entire file is read in).
We can mlock every page as we access them without tracking if the page
is already resident but this introduces large overhead for each access.
The third option is mapping the entire region with PROT_NONE and using
a signal handler for SIGSEGV to mprotect(PROT_READ) and mlock() the
needed page.  Doing this page at a time adds a significant performance
penalty.  Batching can be used to mitigate this overhead, but in order
to safely avoid trying to mprotect pages outside of the mapping, the
boundaries of each mapping to be used in this way must be tracked and
available to the signal handler.  This is precisely what the mm system
in the kernel should already be doing.

For mlock(MLOCK_ONFAULT) the user is charged against RLIMIT_MEMLOCK as
if mlock(MLOCK_LOCKED) or mmap(MAP_LOCKED) was used, so when the VMA is
created not when the pages are faulted in.  For mlockall(MCL_ONFAULT)
the user is charged as if MCL_FUTURE was used.  This decision was made
to keep the accounting checks out of the page fault path.

To illustrate the benefit of this set I wrote a test program that mmaps
a 5 GB file filled with random data and then makes 15,000,000 accesses
to random addresses in that mapping.  The test program was run 20 times
for each setup.  Results are reported for two program portions, setup
and execution.  The setup phase is calling mmap and optionally mlock on
the entire region.  For most experiments this is trivial, but it
highlights the cost of faulting in the entire region.  Results are
averages across the 20 runs in milliseconds.

mmap with mlock(MLOCK_LOCKED) on entire range:
Setup avg:      8228.666
Processing avg: 8274.257

mmap with mlock(MLOCK_LOCKED) before each access:
Setup avg:      0.113
Processing avg: 90993.552

mmap with PROT_NONE and signal handler and batch size of 1 page:
With the default value in max_map_count, this gets ENOMEM as I attempt
to change the permissions, after upping the sysctl significantly I get:
Setup avg:      0.058
Processing avg: 69488.073
mmap with PROT_NONE and signal handler and batch size of 8 pages:
Setup avg:      0.068
Processing avg: 38204.116

mmap with PROT_NONE and signal handler and batch size of 16 pages:
Setup avg:      0.044
Processing avg: 29671.180

mmap with mlock(MLOCK_ONFAULT) on entire range:
Setup avg:      0.189
Processing avg: 17904.899

The signal handler in the batch cases faulted in memory in two steps to
avoid having to know the start and end of the faulting mapping.  The
first step covers the page that caused the fault as we know that it will
be possible to lock.  The second step speculatively tries to mlock and
mprotect the batch size - 1 pages that follow.  There may be a clever
way to avoid this without having the program track each mapping to be
covered by this handeler in a globally accessible structure, but I could
not find it.  It should be noted that with a large enough batch size
this two step fault handler can still cause the program to crash if it
reaches far beyond the end of the mapping.

These results show that if the developer knows that a majority of the
mapping will be used, it is better to try and fault it in at once,
otherwise mlock(MLOCK_ONFAULT) is significantly faster.

The performance cost of these patches are minimal on the two benchmarks
I have tested (stream and kernbench).  The following are the average
values across 20 runs of stream and 10 runs of kernbench after a warmup
run whose results were discarded.

Avg throughput in MB/s from stream using 1000000 element arrays
Test     4.2-rc1      4.2-rc1+lock-on-fault
Copy:    10,566.5     10,421
Scale:   10,685       10,503.5
Add:     12,044.1     11,814.2
Triad:   12,064.8     11,846.3

Kernbench optimal load
                 4.2-rc1  4.2-rc1+lock-on-fault
Elapsed Time     78.453   78.991
User Time        64.2395  65.2355
System Time      9.7335   9.7085
Context Switches 22211.5  22412.1
Sleeps           14965.3  14956.1

---
Changes from V6:
* Bump the x86 system call number to avoid collision with userfaultfd
* Fix FOLL_POPULATE and FOLL_MLOCK usage when mmap is called with
 MAP_POPULATE
* Add documentation for the proc smaps change
* checkpatch fixes

Changes from V5:
Drop MLOCK_LOCKED flag
* MLOCK_ONFAULT and MCL_ONFAULT are treated as a modifier to other locking
 operations, mirroring the relationship between VM_LOCKED and
 VM_LOCKONFAULT
* Drop mmap flag and related tests
* Fix clearing of MCL_CURRENT when mlockall is called with MCL_FUTURE,
 mlockall behavoir now matches the old behavior WRT to ordering

Changes from V4:
Drop all architectures for new sys call entries except x86[_64] and MIPS
Drop munlock2 and munlockall2
Make VM_LOCKONFAULT a modifier to VM_LOCKED only to simplify book keeping
Adjust tests to match

Changes from V3:
Ensure that pages present when mlock2(MLOCK_ONFAULT) is called are locked
Ensure that VM_LOCKONFAULT is handled in cases that used to only check VM_LOCKED
Add tests for new system calls
Add missing syscall entries, fix NR_syscalls on multiple arch's
Add missing MAP_LOCKONFAULT for tile

Changes from V2:
Added new system calls for mlock, munlock, and munlockall with added
flags arguments for controlling how memory is locked or unlocked.


Eric B Munson (6):
  mm: mlock: Refactor mlock, munlock, and munlockall code
  mm: mlock: Add new mlock system call
  mm: Introduce VM_LOCKONFAULT
  mm: mlock: Add mlock flags to enable VM_LOCKONFAULT usage
  selftests: vm: Add tests for lock on fault
  mips: Add entry for new mlock2 syscall

 Documentation/filesystems/proc.txt          |   1 +
 arch/alpha/include/uapi/asm/mman.h          |   3 +
 arch/mips/include/uapi/asm/mman.h           |   6 +
 arch/mips/include/uapi/asm/unistd.h         |  15 +-
 arch/mips/kernel/scall32-o32.S              |   1 +
 arch/mips/kernel/scall64-64.S               |   1 +
 arch/mips/kernel/scall64-n32.S              |   1 +
 arch/mips/kernel/scall64-o32.S              |   1 +
 arch/parisc/include/uapi/asm/mman.h         |   3 +
 arch/powerpc/include/uapi/asm/mman.h        |   1 +
 arch/sparc/include/uapi/asm/mman.h          |   1 +
 arch/tile/include/uapi/asm/mman.h           |   1 +
 arch/x86/entry/syscalls/syscall_32.tbl      |   1 +
 arch/x86/entry/syscalls/syscall_64.tbl      |   1 +
 arch/xtensa/include/uapi/asm/mman.h         |   6 +
 drivers/gpu/drm/drm_vm.c                    |   8 +-
 fs/proc/task_mmu.c                          |   1 +
 include/linux/mm.h                          |   2 +
 include/linux/syscalls.h                    |   2 +
 include/uapi/asm-generic/mman-common.h      |   5 +
 include/uapi/asm-generic/mman.h             |   1 +
 include/uapi/asm-generic/unistd.h           |   4 +-
 kernel/fork.c                               |   2 +-
 kernel/sys_ni.c                             |   1 +
 mm/debug.c                                  |   1 +
 mm/gup.c                                    |  10 +-
 mm/huge_memory.c                            |   2 +-
 mm/hugetlb.c                                |   4 +-
 mm/mlock.c                                  |  87 +++-
 mm/mmap.c                                   |   2 +-
 mm/rmap.c                                   |   6 +-
 tools/testing/selftests/vm/Makefile         |   2 +
 tools/testing/selftests/vm/mlock2-tests.c   | 661 ++++++++++++++++++++++++++++
 tools/testing/selftests/vm/on-fault-limit.c |  47 ++
 tools/testing/selftests/vm/run_vmtests      |  22 +
 35 files changed, 872 insertions(+), 41 deletions(-)
 create mode 100644 tools/testing/selftests/vm/mlock2-tests.c
 create mode 100644 tools/testing/selftests/vm/on-fault-limit.c

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: linux-alpha@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: sparclinux@vger.kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: linux-mm@kvack.org
Cc: linux-arch@vger.kernel.org
Cc: linux-api@vger.kernel.org

-- 
1.9.1

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

[PATCH v7 0/6] Allow user to request memory to be locked on page fault

[Eric B Munson]

mlock() allows a user to control page out of program memory, but this
comes at the cost of faulting in the entire mapping when it is
allocated.  For large mappings where the entire area is not necessary
this is not ideal.  Instead of forcing all locked pages to be present
when they are allocated, this set creates a middle ground.  Pages are
marked to be placed on the unevictable LRU (locked) when they are first
used, but they are not faulted in by the mlock call.

This series introduces a new mlock() system call that takes a flags
argument along with the start address and size.  This flags argument
gives the caller the ability to request memory be locked in the
traditional way, or to be locked after the page is faulted in.  A new
MCL flag is added to mirror the lock on fault behavior from mlock() in
mlockall().

There are two main use cases that this set covers.  The first is the
security focussed mlock case.  A buffer is needed that cannot be written
to swap.  The maximum size is known, but on average the memory used is
significantly less than this maximum.  With lock on fault, the buffer
is guaranteed to never be paged out without consuming the maximum size
every time such a buffer is created.

The second use case is focussed on performance.  Portions of a large
file are needed and we want to keep the used portions in memory once
accessed.  This is the case for large graphical models where the path
through the graph is not known until run time.  The entire graph is
unlikely to be used in a given invocation, but once a node has been
used it needs to stay resident for further processing.  Given these
constraints we have a number of options.  We can potentially waste a
large amount of memory by mlocking the entire region (this can also
cause a significant stall at startup as the entire file is read in).
We can mlock every page as we access them without tracking if the page
is already resident but this introduces large overhead for each access.
The third option is mapping the entire region with PROT_NONE and using
a signal handler for SIGSEGV to mprotect(PROT_READ) and mlock() the
needed page.  Doing this page at a time adds a significant performance
penalty.  Batching can be used to mitigate this overhead, but in order
to safely avoid trying to mprotect pages outside of the mapping, the
boundaries of each mapping to be used in this way must be tracked and
available to the signal handler.  This is precisely what the mm system
in the kernel should already be doing.

For mlock(MLOCK_ONFAULT) the user is charged against RLIMIT_MEMLOCK as
if mlock(MLOCK_LOCKED) or mmap(MAP_LOCKED) was used, so when the VMA is
created not when the pages are faulted in.  For mlockall(MCL_ONFAULT)
the user is charged as if MCL_FUTURE was used.  This decision was made
to keep the accounting checks out of the page fault path.

To illustrate the benefit of this set I wrote a test program that mmaps
a 5 GB file filled with random data and then makes 15,000,000 accesses
to random addresses in that mapping.  The test program was run 20 times
for each setup.  Results are reported for two program portions, setup
and execution.  The setup phase is calling mmap and optionally mlock on
the entire region.  For most experiments this is trivial, but it
highlights the cost of faulting in the entire region.  Results are
averages across the 20 runs in milliseconds.

mmap with mlock(MLOCK_LOCKED) on entire range:
Setup avg:      8228.666
Processing avg: 8274.257

mmap with mlock(MLOCK_LOCKED) before each access:
Setup avg:      0.113
Processing avg: 90993.552

mmap with PROT_NONE and signal handler and batch size of 1 page:
With the default value in max_map_count, this gets ENOMEM as I attempt
to change the permissions, after upping the sysctl significantly I get:
Setup avg:      0.058
Processing avg: 69488.073
mmap with PROT_NONE and signal handler and batch size of 8 pages:
Setup avg:      0.068
Processing avg: 38204.116

mmap with PROT_NONE and signal handler and batch size of 16 pages:
Setup avg:      0.044
Processing avg: 29671.180

mmap with mlock(MLOCK_ONFAULT) on entire range:
Setup avg:      0.189
Processing avg: 17904.899

The signal handler in the batch cases faulted in memory in two steps to
avoid having to know the start and end of the faulting mapping.  The
first step covers the page that caused the fault as we know that it will
be possible to lock.  The second step speculatively tries to mlock and
mprotect the batch size - 1 pages that follow.  There may be a clever
way to avoid this without having the program track each mapping to be
covered by this handeler in a globally accessible structure, but I could
not find it.  It should be noted that with a large enough batch size
this two step fault handler can still cause the program to crash if it
reaches far beyond the end of the mapping.

These results show that if the developer knows that a majority of the
mapping will be used, it is better to try and fault it in at once,
otherwise mlock(MLOCK_ONFAULT) is significantly faster.

The performance cost of these patches are minimal on the two benchmarks
I have tested (stream and kernbench).  The following are the average
values across 20 runs of stream and 10 runs of kernbench after a warmup
run whose results were discarded.

Avg throughput in MB/s from stream using 1000000 element arrays
Test     4.2-rc1      4.2-rc1+lock-on-fault
Copy:    10,566.5     10,421
Scale:   10,685       10,503.5
Add:     12,044.1     11,814.2
Triad:   12,064.8     11,846.3

Kernbench optimal load
                 4.2-rc1  4.2-rc1+lock-on-fault
Elapsed Time     78.453   78.991
User Time        64.2395  65.2355
System Time      9.7335   9.7085
Context Switches 22211.5  22412.1
Sleeps           14965.3  14956.1

---
Changes from V6:
* Bump the x86 system call number to avoid collision with userfaultfd
* Fix FOLL_POPULATE and FOLL_MLOCK usage when mmap is called with
 MAP_POPULATE
* Add documentation for the proc smaps change
* checkpatch fixes

Changes from V5:
Drop MLOCK_LOCKED flag
* MLOCK_ONFAULT and MCL_ONFAULT are treated as a modifier to other locking
 operations, mirroring the relationship between VM_LOCKED and
 VM_LOCKONFAULT
* Drop mmap flag and related tests
* Fix clearing of MCL_CURRENT when mlockall is called with MCL_FUTURE,
 mlockall behavoir now matches the old behavior WRT to ordering

Changes from V4:
Drop all architectures for new sys call entries except x86[_64] and MIPS
Drop munlock2 and munlockall2
Make VM_LOCKONFAULT a modifier to VM_LOCKED only to simplify book keeping
Adjust tests to match

Changes from V3:
Ensure that pages present when mlock2(MLOCK_ONFAULT) is called are locked
Ensure that VM_LOCKONFAULT is handled in cases that used to only check VM_LOCKED
Add tests for new system calls
Add missing syscall entries, fix NR_syscalls on multiple arch's
Add missing MAP_LOCKONFAULT for tile

Changes from V2:
Added new system calls for mlock, munlock, and munlockall with added
flags arguments for controlling how memory is locked or unlocked.


Eric B Munson (6):
  mm: mlock: Refactor mlock, munlock, and munlockall code
  mm: mlock: Add new mlock system call
  mm: Introduce VM_LOCKONFAULT
  mm: mlock: Add mlock flags to enable VM_LOCKONFAULT usage
  selftests: vm: Add tests for lock on fault
  mips: Add entry for new mlock2 syscall

 Documentation/filesystems/proc.txt          |   1 +
 arch/alpha/include/uapi/asm/mman.h          |   3 +
 arch/mips/include/uapi/asm/mman.h           |   6 +
 arch/mips/include/uapi/asm/unistd.h         |  15 +-
 arch/mips/kernel/scall32-o32.S              |   1 +
 arch/mips/kernel/scall64-64.S               |   1 +
 arch/mips/kernel/scall64-n32.S              |   1 +
 arch/mips/kernel/scall64-o32.S              |   1 +
 arch/parisc/include/uapi/asm/mman.h         |   3 +
 arch/powerpc/include/uapi/asm/mman.h        |   1 +
 arch/sparc/include/uapi/asm/mman.h          |   1 +
 arch/tile/include/uapi/asm/mman.h           |   1 +
 arch/x86/entry/syscalls/syscall_32.tbl      |   1 +
 arch/x86/entry/syscalls/syscall_64.tbl      |   1 +
 arch/xtensa/include/uapi/asm/mman.h         |   6 +
 drivers/gpu/drm/drm_vm.c                    |   8 +-
 fs/proc/task_mmu.c                          |   1 +
 include/linux/mm.h                          |   2 +
 include/linux/syscalls.h                    |   2 +
 include/uapi/asm-generic/mman-common.h      |   5 +
 include/uapi/asm-generic/mman.h             |   1 +
 include/uapi/asm-generic/unistd.h           |   4 +-
 kernel/fork.c                               |   2 +-
 kernel/sys_ni.c                             |   1 +
 mm/debug.c                                  |   1 +
 mm/gup.c                                    |  10 +-
 mm/huge_memory.c                            |   2 +-
 mm/hugetlb.c                                |   4 +-
 mm/mlock.c                                  |  87 +++-
 mm/mmap.c                                   |   2 +-
 mm/rmap.c                                   |   6 +-
 tools/testing/selftests/vm/Makefile         |   2 +
 tools/testing/selftests/vm/mlock2-tests.c   | 661 ++++++++++++++++++++++++++++
 tools/testing/selftests/vm/on-fault-limit.c |  47 ++
 tools/testing/selftests/vm/run_vmtests      |  22 +
 35 files changed, 872 insertions(+), 41 deletions(-)
 create mode 100644 tools/testing/selftests/vm/mlock2-tests.c
 create mode 100644 tools/testing/selftests/vm/on-fault-limit.c

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: linux-alpha@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: sparclinux@vger.kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: linux-mm@kvack.org
Cc: linux-arch@vger.kernel.org
Cc: linux-api@vger.kernel.org

-- 
1.9.1

[PATCH v7 2/6] mm: mlock: Add new mlock system call

[Eric B Munson]

With the refactored mlock code, introduce a new system call for mlock.
The new call will allow the user to specify what lock states are being
added.  mlock2 is trivial at the moment, but a follow on patch will add
a new mlock state making it useful.

Signed-off-by: Eric B Munson <emunson@akamai.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: linux-alpha@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: adi-buildroot-devel@lists.sourceforge.net
Cc: linux-cris-kernel@axis.com
Cc: linux-ia64@vger.kernel.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-am33-list@redhat.com
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: sparclinux@vger.kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: linux-api@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
---
 arch/x86/entry/syscalls/syscall_32.tbl | 1 +
 arch/x86/entry/syscalls/syscall_64.tbl | 1 +
 include/linux/syscalls.h               | 2 ++
 include/uapi/asm-generic/unistd.h      | 4 +++-
 kernel/sys_ni.c                        | 1 +
 mm/mlock.c                             | 8 ++++++++
 6 files changed, 16 insertions(+), 1 deletion(-)

diff --git a/arch/x86/entry/syscalls/syscall_32.tbl b/arch/x86/entry/syscalls/syscall_32.tbl
index ef8187f..8e06da6 100644
--- a/arch/x86/entry/syscalls/syscall_32.tbl
+++ b/arch/x86/entry/syscalls/syscall_32.tbl
@@ -365,3 +365,4 @@
 356	i386	memfd_create		sys_memfd_create
 357	i386	bpf			sys_bpf
 358	i386	execveat		sys_execveat			stub32_execveat
+360	i386	mlock2			sys_mlock2
diff --git a/arch/x86/entry/syscalls/syscall_64.tbl b/arch/x86/entry/syscalls/syscall_64.tbl
index 9ef32d5..67601e7 100644
--- a/arch/x86/entry/syscalls/syscall_64.tbl
+++ b/arch/x86/entry/syscalls/syscall_64.tbl
@@ -329,6 +329,7 @@
 320	common	kexec_file_load		sys_kexec_file_load
 321	common	bpf			sys_bpf
 322	64	execveat		stub_execveat
+324	common	mlock2			sys_mlock2
 
 #
 # x32-specific system call numbers start at 512 to avoid cache impact
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index b45c45b..56a3d59 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -884,4 +884,6 @@ asmlinkage long sys_execveat(int dfd, const char __user *filename,
 			const char __user *const __user *argv,
 			const char __user *const __user *envp, int flags);
 
+asmlinkage long sys_mlock2(unsigned long start, size_t len, int flags);
+
 #endif
diff --git a/include/uapi/asm-generic/unistd.h b/include/uapi/asm-generic/unistd.h
index e016bd9..14a6013 100644
--- a/include/uapi/asm-generic/unistd.h
+++ b/include/uapi/asm-generic/unistd.h
@@ -709,9 +709,11 @@ __SYSCALL(__NR_memfd_create, sys_memfd_create)
 __SYSCALL(__NR_bpf, sys_bpf)
 #define __NR_execveat 281
 __SC_COMP(__NR_execveat, sys_execveat, compat_sys_execveat)
+#define __NR_mlock2 282
+__SYSCALL(__NR_mlock2, sys_mlock2)
 
 #undef __NR_syscalls
-#define __NR_syscalls 282
+#define __NR_syscalls 283
 
 /*
  * All syscalls below here should go away really,
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index 7995ef5..4818b71 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -193,6 +193,7 @@ cond_syscall(sys_mlock);
 cond_syscall(sys_munlock);
 cond_syscall(sys_mlockall);
 cond_syscall(sys_munlockall);
+cond_syscall(sys_mlock2);
 cond_syscall(sys_mincore);
 cond_syscall(sys_madvise);
 cond_syscall(sys_mremap);
diff --git a/mm/mlock.c b/mm/mlock.c
index 5692ee5..3094f27 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -643,6 +643,14 @@ SYSCALL_DEFINE2(mlock, unsigned long, start, size_t, len)
 	return do_mlock(start, len, VM_LOCKED);
 }
 
+SYSCALL_DEFINE3(mlock2, unsigned long, start, size_t, len, int, flags)
+{
+	if (flags)
+		return -EINVAL;
+
+	return do_mlock(start, len, VM_LOCKED);
+}
+
 SYSCALL_DEFINE2(munlock, unsigned long, start, size_t, len)
 {
 	int ret;
-- 
1.9.1

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

[PATCH v7 2/6] mm: mlock: Add new mlock system call

[Eric B Munson]

With the refactored mlock code, introduce a new system call for mlock.
The new call will allow the user to specify what lock states are being
added.  mlock2 is trivial at the moment, but a follow on patch will add
a new mlock state making it useful.

Signed-off-by: Eric B Munson <emunson@akamai.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: linux-alpha@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: adi-buildroot-devel@lists.sourceforge.net
Cc: linux-cris-kernel@axis.com
Cc: linux-ia64@vger.kernel.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-am33-list@redhat.com
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: sparclinux@vger.kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: linux-api@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
---
 arch/x86/entry/syscalls/syscall_32.tbl | 1 +
 arch/x86/entry/syscalls/syscall_64.tbl | 1 +
 include/linux/syscalls.h               | 2 ++
 include/uapi/asm-generic/unistd.h      | 4 +++-
 kernel/sys_ni.c                        | 1 +
 mm/mlock.c                             | 8 ++++++++
 6 files changed, 16 insertions(+), 1 deletion(-)

diff --git a/arch/x86/entry/syscalls/syscall_32.tbl b/arch/x86/entry/syscalls/syscall_32.tbl
index ef8187f..8e06da6 100644
--- a/arch/x86/entry/syscalls/syscall_32.tbl
+++ b/arch/x86/entry/syscalls/syscall_32.tbl
@@ -365,3 +365,4 @@
 356	i386	memfd_create		sys_memfd_create
 357	i386	bpf			sys_bpf
 358	i386	execveat		sys_execveat			stub32_execveat
+360	i386	mlock2			sys_mlock2
diff --git a/arch/x86/entry/syscalls/syscall_64.tbl b/arch/x86/entry/syscalls/syscall_64.tbl
index 9ef32d5..67601e7 100644
--- a/arch/x86/entry/syscalls/syscall_64.tbl
+++ b/arch/x86/entry/syscalls/syscall_64.tbl
@@ -329,6 +329,7 @@
 320	common	kexec_file_load		sys_kexec_file_load
 321	common	bpf			sys_bpf
 322	64	execveat		stub_execveat
+324	common	mlock2			sys_mlock2
 
 #
 # x32-specific system call numbers start at 512 to avoid cache impact
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index b45c45b..56a3d59 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -884,4 +884,6 @@ asmlinkage long sys_execveat(int dfd, const char __user *filename,
 			const char __user *const __user *argv,
 			const char __user *const __user *envp, int flags);
 
+asmlinkage long sys_mlock2(unsigned long start, size_t len, int flags);
+
 #endif
diff --git a/include/uapi/asm-generic/unistd.h b/include/uapi/asm-generic/unistd.h
index e016bd9..14a6013 100644
--- a/include/uapi/asm-generic/unistd.h
+++ b/include/uapi/asm-generic/unistd.h
@@ -709,9 +709,11 @@ __SYSCALL(__NR_memfd_create, sys_memfd_create)
 __SYSCALL(__NR_bpf, sys_bpf)
 #define __NR_execveat 281
 __SC_COMP(__NR_execveat, sys_execveat, compat_sys_execveat)
+#define __NR_mlock2 282
+__SYSCALL(__NR_mlock2, sys_mlock2)
 
 #undef __NR_syscalls
-#define __NR_syscalls 282
+#define __NR_syscalls 283
 
 /*
  * All syscalls below here should go away really,
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index 7995ef5..4818b71 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -193,6 +193,7 @@ cond_syscall(sys_mlock);
 cond_syscall(sys_munlock);
 cond_syscall(sys_mlockall);
 cond_syscall(sys_munlockall);
+cond_syscall(sys_mlock2);
 cond_syscall(sys_mincore);
 cond_syscall(sys_madvise);
 cond_syscall(sys_mremap);
diff --git a/mm/mlock.c b/mm/mlock.c
index 5692ee5..3094f27 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -643,6 +643,14 @@ SYSCALL_DEFINE2(mlock, unsigned long, start, size_t, len)
 	return do_mlock(start, len, VM_LOCKED);
 }
 
+SYSCALL_DEFINE3(mlock2, unsigned long, start, size_t, len, int, flags)
+{
+	if (flags)
+		return -EINVAL;
+
+	return do_mlock(start, len, VM_LOCKED);
+}
+
 SYSCALL_DEFINE2(munlock, unsigned long, start, size_t, len)
 {
 	int ret;
-- 
1.9.1

[PATCH v7 4/6] mm: mlock: Add mlock flags to enable VM_LOCKONFAULT usage

[Eric B Munson]

The previous patch introduced a flag that specified pages in a VMA
should be placed on the unevictable LRU, but they should not be made
present when the area is created.  This patch adds the ability to set
this state via the new mlock system calls.

We add MLOCK_ONFAULT for mlock2 and MCL_ONFAULT for mlockall.
MLOCK_ONFAULT will set the VM_LOCKONFAULT modifier for VM_LOCKED.
MCL_ONFAULT should be used as a modifier to the two other mlockall
flags.  When used with MCL_CURRENT, all current mappings will be marked
with VM_LOCKED | VM_LOCKONFAULT.  When used with MCL_FUTURE, the
mm->def_flags will be marked with VM_LOCKED | VM_LOCKONFAULT.  When used
with both MCL_CURRENT and MCL_FUTURE, all current mappings and
mm->def_flags will be marked with VM_LOCKED | VM_LOCKONFAULT.

Prior to this patch, mlockall() will unconditionally clear the
mm->def_flags any time it is called without MCL_FUTURE.  This behavior
is maintained after adding MCL_ONFAULT.  If a call to
mlockall(MCL_FUTURE) is followed by mlockall(MCL_CURRENT), the
mm->def_flags will be cleared and new VMAs will be unlocked.  This
remains true with or without MCL_ONFAULT in either mlockall()
invocation.

munlock() will unconditionally clear both vma flags.  munlockall()
unconditionally clears for VMA flags on all VMAs and in the
mm->def_flags field.

Signed-off-by: Eric B Munson <emunson@akamai.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: linux-alpha@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: sparclinux@vger.kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: linux-arch@vger.kernel.org
Cc: linux-api@vger.kernel.org
Cc: linux-mm@kvack.org
---
 arch/alpha/include/uapi/asm/mman.h     |  3 ++
 arch/mips/include/uapi/asm/mman.h      |  6 ++++
 arch/parisc/include/uapi/asm/mman.h    |  3 ++
 arch/powerpc/include/uapi/asm/mman.h   |  1 +
 arch/sparc/include/uapi/asm/mman.h     |  1 +
 arch/tile/include/uapi/asm/mman.h      |  1 +
 arch/xtensa/include/uapi/asm/mman.h    |  6 ++++
 include/uapi/asm-generic/mman-common.h |  5 ++++
 include/uapi/asm-generic/mman.h        |  1 +
 mm/mlock.c                             | 53 +++++++++++++++++++++++++---------
 10 files changed, 67 insertions(+), 13 deletions(-)

diff --git a/arch/alpha/include/uapi/asm/mman.h b/arch/alpha/include/uapi/asm/mman.h
index 0086b47..f2f9496 100644
--- a/arch/alpha/include/uapi/asm/mman.h
+++ b/arch/alpha/include/uapi/asm/mman.h
@@ -37,6 +37,9 @@
 
 #define MCL_CURRENT	 8192		/* lock all currently mapped pages */
 #define MCL_FUTURE	16384		/* lock all additions to address space */
+#define MCL_ONFAULT	32768		/* lock all pages that are faulted in */
+
+#define MLOCK_ONFAULT	0x01		/* Lock pages in range after they are faulted in, do not prefault */
 
 #define MADV_NORMAL	0		/* no further special treatment */
 #define MADV_RANDOM	1		/* expect random page references */
diff --git a/arch/mips/include/uapi/asm/mman.h b/arch/mips/include/uapi/asm/mman.h
index cfcb876..97c03f4 100644
--- a/arch/mips/include/uapi/asm/mman.h
+++ b/arch/mips/include/uapi/asm/mman.h
@@ -61,6 +61,12 @@
  */
 #define MCL_CURRENT	1		/* lock all current mappings */
 #define MCL_FUTURE	2		/* lock all future mappings */
+#define MCL_ONFAULT	4		/* lock all pages that are faulted in */
+
+/*
+ * Flags for mlock
+ */
+#define MLOCK_ONFAULT	0x01		/* Lock pages in range after they are faulted in, do not prefault */
 
 #define MADV_NORMAL	0		/* no further special treatment */
 #define MADV_RANDOM	1		/* expect random page references */
diff --git a/arch/parisc/include/uapi/asm/mman.h b/arch/parisc/include/uapi/asm/mman.h
index 294d251..ecc3ae1 100644
--- a/arch/parisc/include/uapi/asm/mman.h
+++ b/arch/parisc/include/uapi/asm/mman.h
@@ -31,6 +31,9 @@
 
 #define MCL_CURRENT	1		/* lock all current mappings */
 #define MCL_FUTURE	2		/* lock all future mappings */
+#define MCL_ONFAULT	4		/* lock all pages that are faulted in */
+
+#define MLOCK_ONFAULT	0x01		/* Lock pages in range after they are faulted in, do not prefault */
 
 #define MADV_NORMAL     0               /* no further special treatment */
 #define MADV_RANDOM     1               /* expect random page references */
diff --git a/arch/powerpc/include/uapi/asm/mman.h b/arch/powerpc/include/uapi/asm/mman.h
index 6ea26df..03c06ba 100644
--- a/arch/powerpc/include/uapi/asm/mman.h
+++ b/arch/powerpc/include/uapi/asm/mman.h
@@ -22,6 +22,7 @@
 
 #define MCL_CURRENT     0x2000          /* lock all currently mapped pages */
 #define MCL_FUTURE      0x4000          /* lock all additions to address space */
+#define MCL_ONFAULT	0x8000		/* lock all pages that are faulted in */
 
 #define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
 #define MAP_NONBLOCK	0x10000		/* do not block on IO */
diff --git a/arch/sparc/include/uapi/asm/mman.h b/arch/sparc/include/uapi/asm/mman.h
index 0b14df3..9765896 100644
--- a/arch/sparc/include/uapi/asm/mman.h
+++ b/arch/sparc/include/uapi/asm/mman.h
@@ -17,6 +17,7 @@
 
 #define MCL_CURRENT     0x2000          /* lock all currently mapped pages */
 #define MCL_FUTURE      0x4000          /* lock all additions to address space */
+#define MCL_ONFAULT	0x8000		/* lock all pages that are faulted in */
 
 #define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
 #define MAP_NONBLOCK	0x10000		/* do not block on IO */
diff --git a/arch/tile/include/uapi/asm/mman.h b/arch/tile/include/uapi/asm/mman.h
index 81b8fc3..63ee13f 100644
--- a/arch/tile/include/uapi/asm/mman.h
+++ b/arch/tile/include/uapi/asm/mman.h
@@ -36,6 +36,7 @@
  */
 #define MCL_CURRENT	1		/* lock all current mappings */
 #define MCL_FUTURE	2		/* lock all future mappings */
+#define MCL_ONFAULT	4		/* lock all pages that are faulted in */
 
 
 #endif /* _ASM_TILE_MMAN_H */
diff --git a/arch/xtensa/include/uapi/asm/mman.h b/arch/xtensa/include/uapi/asm/mman.h
index 201aec0..360944e 100644
--- a/arch/xtensa/include/uapi/asm/mman.h
+++ b/arch/xtensa/include/uapi/asm/mman.h
@@ -74,6 +74,12 @@
  */
 #define MCL_CURRENT	1		/* lock all current mappings */
 #define MCL_FUTURE	2		/* lock all future mappings */
+#define MCL_ONFAULT	4		/* lock all pages that are faulted in */
+
+/*
+ * Flags for mlock
+ */
+#define MLOCK_ONFAULT	0x01		/* Lock pages in range after they are faulted in, do not prefault */
 
 #define MADV_NORMAL	0		/* no further special treatment */
 #define MADV_RANDOM	1		/* expect random page references */
diff --git a/include/uapi/asm-generic/mman-common.h b/include/uapi/asm-generic/mman-common.h
index ddc3b36..a74dd84 100644
--- a/include/uapi/asm-generic/mman-common.h
+++ b/include/uapi/asm-generic/mman-common.h
@@ -25,6 +25,11 @@
 # define MAP_UNINITIALIZED 0x0		/* Don't support this flag */
 #endif
 
+/*
+ * Flags for mlock
+ */
+#define MLOCK_ONFAULT	0x01		/* Lock pages in range after they are faulted in, do not prefault */
+
 #define MS_ASYNC	1		/* sync memory asynchronously */
 #define MS_INVALIDATE	2		/* invalidate the caches */
 #define MS_SYNC		4		/* synchronous memory sync */
diff --git a/include/uapi/asm-generic/mman.h b/include/uapi/asm-generic/mman.h
index e9fe6fd..7162cd4 100644
--- a/include/uapi/asm-generic/mman.h
+++ b/include/uapi/asm-generic/mman.h
@@ -17,5 +17,6 @@
 
 #define MCL_CURRENT	1		/* lock all current mappings */
 #define MCL_FUTURE	2		/* lock all future mappings */
+#define MCL_ONFAULT	4		/* lock all pages that are faulted in */
 
 #endif /* __ASM_GENERIC_MMAN_H */
diff --git a/mm/mlock.c b/mm/mlock.c
index 029a75b..7e1b8c5 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -506,7 +506,8 @@ static int mlock_fixup(struct vm_area_struct *vma, struct vm_area_struct **prev,
 
 	if (newflags == vma->vm_flags || (vma->vm_flags & VM_SPECIAL) ||
 	    is_vm_hugetlb_page(vma) || vma == get_gate_vma(current->mm))
-		goto out;	/* don't set VM_LOCKED,  don't count */
+		/* don't set VM_LOCKED or VM_LOCKONFAULT and don't count */
+		goto out;
 
 	pgoff = vma->vm_pgoff + ((start - vma->vm_start) >> PAGE_SHIFT);
 	*prev = vma_merge(mm, *prev, start, end, newflags, vma->anon_vma,
@@ -576,7 +577,8 @@ static int apply_vma_lock_flags(unsigned long start, size_t len,
 		prev = vma;
 
 	for (nstart = start ; ; ) {
-		vm_flags_t newflags = vma->vm_flags & ~VM_LOCKED;
+		vm_flags_t newflags =
+			vma->vm_flags & ~(VM_LOCKED | VM_LOCKONFAULT);
 
 		newflags |= flags;
 
@@ -645,10 +647,15 @@ SYSCALL_DEFINE2(mlock, unsigned long, start, size_t, len)
 
 SYSCALL_DEFINE3(mlock2, unsigned long, start, size_t, len, int, flags)
 {
-	if (flags)
+	vm_flags_t vm_flags = VM_LOCKED;
+
+	if (flags & ~MLOCK_ONFAULT)
 		return -EINVAL;
 
-	return do_mlock(start, len, VM_LOCKED);
+	if (flags & MLOCK_ONFAULT)
+		vm_flags |= VM_LOCKONFAULT;
+
+	return do_mlock(start, len, vm_flags);
 }
 
 SYSCALL_DEFINE2(munlock, unsigned long, start, size_t, len)
@@ -665,24 +672,43 @@ SYSCALL_DEFINE2(munlock, unsigned long, start, size_t, len)
 	return ret;
 }
 
+/*
+ * Take the MCL_* flags passed into mlockall (or 0 if called from munlockall)
+ * and translate into the appropriate modifications to mm->def_flags and/or the
+ * flags for all current VMAs.
+ *
+ * There are a couple of subtleties with this.  If mlockall() is called multiple
+ * times with different flags, the values do not necessarily stack.  If mlockall
+ * is called once including the MCL_FUTURE flag and then a second time without
+ * it, VM_LOCKED and VM_LOCKONFAULT will be cleared from mm->def_flags.
+ */
 static int apply_mlockall_flags(int flags)
 {
 	struct vm_area_struct * vma, * prev = NULL;
+	vm_flags_t to_add = 0;
 
-	if (flags & MCL_FUTURE)
+	current->mm->def_flags &= ~(VM_LOCKED | VM_LOCKONFAULT);
+	if (flags & MCL_FUTURE) {
 		current->mm->def_flags |= VM_LOCKED;
-	else
-		current->mm->def_flags &= ~VM_LOCKED;
 
-	if (flags == MCL_FUTURE)
-		goto out;
+		if (flags & MCL_ONFAULT)
+			current->mm->def_flags |= VM_LOCKONFAULT;
+
+		if (!(flags & MCL_CURRENT))
+			goto out;
+	}
+
+	if (flags & MCL_CURRENT) {
+		to_add |= VM_LOCKED;
+		if (flags & MCL_ONFAULT)
+			to_add |= VM_LOCKONFAULT;
+	}
 
 	for (vma = current->mm->mmap; vma ; vma = prev->vm_next) {
 		vm_flags_t newflags;
 
-		newflags = vma->vm_flags & ~VM_LOCKED;
-		if (flags & MCL_CURRENT)
-			newflags |= VM_LOCKED;
+		newflags = vma->vm_flags & ~(VM_LOCKED | VM_LOCKONFAULT);
+		newflags |= to_add;
 
 		/* Ignore errors */
 		mlock_fixup(vma, &prev, vma->vm_start, vma->vm_end, newflags);
@@ -697,7 +723,8 @@ SYSCALL_DEFINE1(mlockall, int, flags)
 	unsigned long lock_limit;
 	int ret = -EINVAL;
 
-	if (!flags || (flags & ~(MCL_CURRENT | MCL_FUTURE)))
+	if (!flags || (flags & ~(MCL_CURRENT | MCL_FUTURE | MCL_ONFAULT)) ||
+	    flags == MCL_ONFAULT)
 		goto out;
 
 	ret = -EPERM;
-- 
1.9.1

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

[PATCH v7 4/6] mm: mlock: Add mlock flags to enable VM_LOCKONFAULT usage

[Eric B Munson]

The previous patch introduced a flag that specified pages in a VMA
should be placed on the unevictable LRU, but they should not be made
present when the area is created.  This patch adds the ability to set
this state via the new mlock system calls.

We add MLOCK_ONFAULT for mlock2 and MCL_ONFAULT for mlockall.
MLOCK_ONFAULT will set the VM_LOCKONFAULT modifier for VM_LOCKED.
MCL_ONFAULT should be used as a modifier to the two other mlockall
flags.  When used with MCL_CURRENT, all current mappings will be marked
with VM_LOCKED | VM_LOCKONFAULT.  When used with MCL_FUTURE, the
mm->def_flags will be marked with VM_LOCKED | VM_LOCKONFAULT.  When used
with both MCL_CURRENT and MCL_FUTURE, all current mappings and
mm->def_flags will be marked with VM_LOCKED | VM_LOCKONFAULT.

Prior to this patch, mlockall() will unconditionally clear the
mm->def_flags any time it is called without MCL_FUTURE.  This behavior
is maintained after adding MCL_ONFAULT.  If a call to
mlockall(MCL_FUTURE) is followed by mlockall(MCL_CURRENT), the
mm->def_flags will be cleared and new VMAs will be unlocked.  This
remains true with or without MCL_ONFAULT in either mlockall()
invocation.

munlock() will unconditionally clear both vma flags.  munlockall()
unconditionally clears for VMA flags on all VMAs and in the
mm->def_flags field.

Signed-off-by: Eric B Munson <emunson@akamai.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: linux-alpha@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: sparclinux@vger.kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: linux-arch@vger.kernel.org
Cc: linux-api@vger.kernel.org
Cc: linux-mm@kvack.org
---
 arch/alpha/include/uapi/asm/mman.h     |  3 ++
 arch/mips/include/uapi/asm/mman.h      |  6 ++++
 arch/parisc/include/uapi/asm/mman.h    |  3 ++
 arch/powerpc/include/uapi/asm/mman.h   |  1 +
 arch/sparc/include/uapi/asm/mman.h     |  1 +
 arch/tile/include/uapi/asm/mman.h      |  1 +
 arch/xtensa/include/uapi/asm/mman.h    |  6 ++++
 include/uapi/asm-generic/mman-common.h |  5 ++++
 include/uapi/asm-generic/mman.h        |  1 +
 mm/mlock.c                             | 53 +++++++++++++++++++++++++---------
 10 files changed, 67 insertions(+), 13 deletions(-)

diff --git a/arch/alpha/include/uapi/asm/mman.h b/arch/alpha/include/uapi/asm/mman.h
index 0086b47..f2f9496 100644
--- a/arch/alpha/include/uapi/asm/mman.h
+++ b/arch/alpha/include/uapi/asm/mman.h
@@ -37,6 +37,9 @@
 
 #define MCL_CURRENT	 8192		/* lock all currently mapped pages */
 #define MCL_FUTURE	16384		/* lock all additions to address space */
+#define MCL_ONFAULT	32768		/* lock all pages that are faulted in */
+
+#define MLOCK_ONFAULT	0x01		/* Lock pages in range after they are faulted in, do not prefault */
 
 #define MADV_NORMAL	0		/* no further special treatment */
 #define MADV_RANDOM	1		/* expect random page references */
diff --git a/arch/mips/include/uapi/asm/mman.h b/arch/mips/include/uapi/asm/mman.h
index cfcb876..97c03f4 100644
--- a/arch/mips/include/uapi/asm/mman.h
+++ b/arch/mips/include/uapi/asm/mman.h
@@ -61,6 +61,12 @@
  */
 #define MCL_CURRENT	1		/* lock all current mappings */
 #define MCL_FUTURE	2		/* lock all future mappings */
+#define MCL_ONFAULT	4		/* lock all pages that are faulted in */
+
+/*
+ * Flags for mlock
+ */
+#define MLOCK_ONFAULT	0x01		/* Lock pages in range after they are faulted in, do not prefault */
 
 #define MADV_NORMAL	0		/* no further special treatment */
 #define MADV_RANDOM	1		/* expect random page references */
diff --git a/arch/parisc/include/uapi/asm/mman.h b/arch/parisc/include/uapi/asm/mman.h
index 294d251..ecc3ae1 100644
--- a/arch/parisc/include/uapi/asm/mman.h
+++ b/arch/parisc/include/uapi/asm/mman.h
@@ -31,6 +31,9 @@
 
 #define MCL_CURRENT	1		/* lock all current mappings */
 #define MCL_FUTURE	2		/* lock all future mappings */
+#define MCL_ONFAULT	4		/* lock all pages that are faulted in */
+
+#define MLOCK_ONFAULT	0x01		/* Lock pages in range after they are faulted in, do not prefault */
 
 #define MADV_NORMAL     0               /* no further special treatment */
 #define MADV_RANDOM     1               /* expect random page references */
diff --git a/arch/powerpc/include/uapi/asm/mman.h b/arch/powerpc/include/uapi/asm/mman.h
index 6ea26df..03c06ba 100644
--- a/arch/powerpc/include/uapi/asm/mman.h
+++ b/arch/powerpc/include/uapi/asm/mman.h
@@ -22,6 +22,7 @@
 
 #define MCL_CURRENT     0x2000          /* lock all currently mapped pages */
 #define MCL_FUTURE      0x4000          /* lock all additions to address space */
+#define MCL_ONFAULT	0x8000		/* lock all pages that are faulted in */
 
 #define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
 #define MAP_NONBLOCK	0x10000		/* do not block on IO */
diff --git a/arch/sparc/include/uapi/asm/mman.h b/arch/sparc/include/uapi/asm/mman.h
index 0b14df3..9765896 100644
--- a/arch/sparc/include/uapi/asm/mman.h
+++ b/arch/sparc/include/uapi/asm/mman.h
@@ -17,6 +17,7 @@
 
 #define MCL_CURRENT     0x2000          /* lock all currently mapped pages */
 #define MCL_FUTURE      0x4000          /* lock all additions to address space */
+#define MCL_ONFAULT	0x8000		/* lock all pages that are faulted in */
 
 #define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
 #define MAP_NONBLOCK	0x10000		/* do not block on IO */
diff --git a/arch/tile/include/uapi/asm/mman.h b/arch/tile/include/uapi/asm/mman.h
index 81b8fc3..63ee13f 100644
--- a/arch/tile/include/uapi/asm/mman.h
+++ b/arch/tile/include/uapi/asm/mman.h
@@ -36,6 +36,7 @@
  */
 #define MCL_CURRENT	1		/* lock all current mappings */
 #define MCL_FUTURE	2		/* lock all future mappings */
+#define MCL_ONFAULT	4		/* lock all pages that are faulted in */
 
 
 #endif /* _ASM_TILE_MMAN_H */
diff --git a/arch/xtensa/include/uapi/asm/mman.h b/arch/xtensa/include/uapi/asm/mman.h
index 201aec0..360944e 100644
--- a/arch/xtensa/include/uapi/asm/mman.h
+++ b/arch/xtensa/include/uapi/asm/mman.h
@@ -74,6 +74,12 @@
  */
 #define MCL_CURRENT	1		/* lock all current mappings */
 #define MCL_FUTURE	2		/* lock all future mappings */
+#define MCL_ONFAULT	4		/* lock all pages that are faulted in */
+
+/*
+ * Flags for mlock
+ */
+#define MLOCK_ONFAULT	0x01		/* Lock pages in range after they are faulted in, do not prefault */
 
 #define MADV_NORMAL	0		/* no further special treatment */
 #define MADV_RANDOM	1		/* expect random page references */
diff --git a/include/uapi/asm-generic/mman-common.h b/include/uapi/asm-generic/mman-common.h
index ddc3b36..a74dd84 100644
--- a/include/uapi/asm-generic/mman-common.h
+++ b/include/uapi/asm-generic/mman-common.h
@@ -25,6 +25,11 @@
 # define MAP_UNINITIALIZED 0x0		/* Don't support this flag */
 #endif
 
+/*
+ * Flags for mlock
+ */
+#define MLOCK_ONFAULT	0x01		/* Lock pages in range after they are faulted in, do not prefault */
+
 #define MS_ASYNC	1		/* sync memory asynchronously */
 #define MS_INVALIDATE	2		/* invalidate the caches */
 #define MS_SYNC		4		/* synchronous memory sync */
diff --git a/include/uapi/asm-generic/mman.h b/include/uapi/asm-generic/mman.h
index e9fe6fd..7162cd4 100644
--- a/include/uapi/asm-generic/mman.h
+++ b/include/uapi/asm-generic/mman.h
@@ -17,5 +17,6 @@
 
 #define MCL_CURRENT	1		/* lock all current mappings */
 #define MCL_FUTURE	2		/* lock all future mappings */
+#define MCL_ONFAULT	4		/* lock all pages that are faulted in */
 
 #endif /* __ASM_GENERIC_MMAN_H */
diff --git a/mm/mlock.c b/mm/mlock.c
index 029a75b..7e1b8c5 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -506,7 +506,8 @@ static int mlock_fixup(struct vm_area_struct *vma, struct vm_area_struct **prev,
 
 	if (newflags == vma->vm_flags || (vma->vm_flags & VM_SPECIAL) ||
 	    is_vm_hugetlb_page(vma) || vma == get_gate_vma(current->mm))
-		goto out;	/* don't set VM_LOCKED,  don't count */
+		/* don't set VM_LOCKED or VM_LOCKONFAULT and don't count */
+		goto out;
 
 	pgoff = vma->vm_pgoff + ((start - vma->vm_start) >> PAGE_SHIFT);
 	*prev = vma_merge(mm, *prev, start, end, newflags, vma->anon_vma,
@@ -576,7 +577,8 @@ static int apply_vma_lock_flags(unsigned long start, size_t len,
 		prev = vma;
 
 	for (nstart = start ; ; ) {
-		vm_flags_t newflags = vma->vm_flags & ~VM_LOCKED;
+		vm_flags_t newflags =
+			vma->vm_flags & ~(VM_LOCKED | VM_LOCKONFAULT);
 
 		newflags |= flags;
 
@@ -645,10 +647,15 @@ SYSCALL_DEFINE2(mlock, unsigned long, start, size_t, len)
 
 SYSCALL_DEFINE3(mlock2, unsigned long, start, size_t, len, int, flags)
 {
-	if (flags)
+	vm_flags_t vm_flags = VM_LOCKED;
+
+	if (flags & ~MLOCK_ONFAULT)
 		return -EINVAL;
 
-	return do_mlock(start, len, VM_LOCKED);
+	if (flags & MLOCK_ONFAULT)
+		vm_flags |= VM_LOCKONFAULT;
+
+	return do_mlock(start, len, vm_flags);
 }
 
 SYSCALL_DEFINE2(munlock, unsigned long, start, size_t, len)
@@ -665,24 +672,43 @@ SYSCALL_DEFINE2(munlock, unsigned long, start, size_t, len)
 	return ret;
 }
 
+/*
+ * Take the MCL_* flags passed into mlockall (or 0 if called from munlockall)
+ * and translate into the appropriate modifications to mm->def_flags and/or the
+ * flags for all current VMAs.
+ *
+ * There are a couple of subtleties with this.  If mlockall() is called multiple
+ * times with different flags, the values do not necessarily stack.  If mlockall
+ * is called once including the MCL_FUTURE flag and then a second time without
+ * it, VM_LOCKED and VM_LOCKONFAULT will be cleared from mm->def_flags.
+ */
 static int apply_mlockall_flags(int flags)
 {
 	struct vm_area_struct * vma, * prev = NULL;
+	vm_flags_t to_add = 0;
 
-	if (flags & MCL_FUTURE)
+	current->mm->def_flags &= ~(VM_LOCKED | VM_LOCKONFAULT);
+	if (flags & MCL_FUTURE) {
 		current->mm->def_flags |= VM_LOCKED;
-	else
-		current->mm->def_flags &= ~VM_LOCKED;
 
-	if (flags == MCL_FUTURE)
-		goto out;
+		if (flags & MCL_ONFAULT)
+			current->mm->def_flags |= VM_LOCKONFAULT;
+
+		if (!(flags & MCL_CURRENT))
+			goto out;
+	}
+
+	if (flags & MCL_CURRENT) {
+		to_add |= VM_LOCKED;
+		if (flags & MCL_ONFAULT)
+			to_add |= VM_LOCKONFAULT;
+	}
 
 	for (vma = current->mm->mmap; vma ; vma = prev->vm_next) {
 		vm_flags_t newflags;
 
-		newflags = vma->vm_flags & ~VM_LOCKED;
-		if (flags & MCL_CURRENT)
-			newflags |= VM_LOCKED;
+		newflags = vma->vm_flags & ~(VM_LOCKED | VM_LOCKONFAULT);
+		newflags |= to_add;
 
 		/* Ignore errors */
 		mlock_fixup(vma, &prev, vma->vm_start, vma->vm_end, newflags);
@@ -697,7 +723,8 @@ SYSCALL_DEFINE1(mlockall, int, flags)
 	unsigned long lock_limit;
 	int ret = -EINVAL;
 
-	if (!flags || (flags & ~(MCL_CURRENT | MCL_FUTURE)))
+	if (!flags || (flags & ~(MCL_CURRENT | MCL_FUTURE | MCL_ONFAULT)) ||
+	    flags == MCL_ONFAULT)
 		goto out;
 
 	ret = -EPERM;
-- 
1.9.1

[PATCH v7 6/6] mips: Add entry for new mlock2 syscall

[Eric B Munson]

A previous commit introduced the new mlock2 syscall, add entries for the
MIPS architecture.

Signed-off-by: Eric B Munson <emunson@akamai.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: linux-api@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: linux-kernel@vger.kernel.org
---
 arch/mips/include/uapi/asm/unistd.h | 15 +++++++++------
 arch/mips/kernel/scall32-o32.S      |  1 +
 arch/mips/kernel/scall64-64.S       |  1 +
 arch/mips/kernel/scall64-n32.S      |  1 +
 arch/mips/kernel/scall64-o32.S      |  1 +
 5 files changed, 13 insertions(+), 6 deletions(-)

diff --git a/arch/mips/include/uapi/asm/unistd.h b/arch/mips/include/uapi/asm/unistd.h
index c03088f..d0bdfaa 100644
--- a/arch/mips/include/uapi/asm/unistd.h
+++ b/arch/mips/include/uapi/asm/unistd.h
@@ -377,16 +377,17 @@
 #define __NR_memfd_create		(__NR_Linux + 354)
 #define __NR_bpf			(__NR_Linux + 355)
 #define __NR_execveat			(__NR_Linux + 356)
+#define __NR_mlock2			(__NR_Linux + 357)
 
 /*
  * Offset of the last Linux o32 flavoured syscall
  */
-#define __NR_Linux_syscalls		356
+#define __NR_Linux_syscalls		357
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
 
 #define __NR_O32_Linux			4000
-#define __NR_O32_Linux_syscalls		356
+#define __NR_O32_Linux_syscalls		357
 
 #if _MIPS_SIM == _MIPS_SIM_ABI64
 
@@ -711,16 +712,17 @@
 #define __NR_memfd_create		(__NR_Linux + 314)
 #define __NR_bpf			(__NR_Linux + 315)
 #define __NR_execveat			(__NR_Linux + 316)
+#define __NR_mlock2			(__NR_Linux + 317)
 
 /*
  * Offset of the last Linux 64-bit flavoured syscall
  */
-#define __NR_Linux_syscalls		316
+#define __NR_Linux_syscalls		317
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
 
 #define __NR_64_Linux			5000
-#define __NR_64_Linux_syscalls		316
+#define __NR_64_Linux_syscalls		317
 
 #if _MIPS_SIM == _MIPS_SIM_NABI32
 
@@ -1049,15 +1051,16 @@
 #define __NR_memfd_create		(__NR_Linux + 318)
 #define __NR_bpf			(__NR_Linux + 319)
 #define __NR_execveat			(__NR_Linux + 320)
+#define __NR_mlock2			(__NR_Linux + 321)
 
 /*
  * Offset of the last N32 flavoured syscall
  */
-#define __NR_Linux_syscalls		320
+#define __NR_Linux_syscalls		321
 
 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
 
 #define __NR_N32_Linux			6000
-#define __NR_N32_Linux_syscalls		320
+#define __NR_N32_Linux_syscalls		321
 
 #endif /* _UAPI_ASM_UNISTD_H */
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 4cc1350..b0b377a 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -599,3 +599,4 @@ EXPORT(sys_call_table)
 	PTR	sys_memfd_create
 	PTR	sys_bpf				/* 4355 */
 	PTR	sys_execveat
+	PTR	sys_mlock2
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index ad4d4463..97aaf51 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -436,4 +436,5 @@ EXPORT(sys_call_table)
 	PTR	sys_memfd_create
 	PTR	sys_bpf				/* 5315 */
 	PTR	sys_execveat
+	PTR	sys_mlock2
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 446cc65..e36f21e 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -429,4 +429,5 @@ EXPORT(sysn32_call_table)
 	PTR	sys_memfd_create
 	PTR	sys_bpf
 	PTR	compat_sys_execveat		/* 6320 */
+	PTR	sys_mlock2
 	.size	sysn32_call_table,.-sysn32_call_table
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index f543ff4..7a8b2df 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -584,4 +584,5 @@ EXPORT(sys32_call_table)
 	PTR	sys_memfd_create
 	PTR	sys_bpf				/* 4355 */
 	PTR	compat_sys_execveat
+	PTR	sys_mlock2
 	.size	sys32_call_table,.-sys32_call_table
-- 
1.9.1

Re: [PATCH v7 2/6] mm: mlock: Add new mlock system call

[Michal Hocko]

On Sun 09-08-15 01:22:52, Eric B Munson wrote:
> With the refactored mlock code, introduce a new system call for mlock.
> The new call will allow the user to specify what lock states are being
> added.  mlock2 is trivial at the moment, but a follow on patch will add
> a new mlock state making it useful.

Looks good to me

Acked-by: Michal Hocko <mhocko@suse.com>

> Signed-off-by: Eric B Munson <emunson@akamai.com>
> Acked-by: Vlastimil Babka <vbabka@suse.cz>
> Cc: Michal Hocko <mhocko@suse.cz>
> Cc: Vlastimil Babka <vbabka@suse.cz>
> Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
> Cc: Geert Uytterhoeven <geert@linux-m68k.org>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Stephen Rothwell <sfr@canb.auug.org.au>
> Cc: Guenter Roeck <linux@roeck-us.net>
> Cc: Andrea Arcangeli <aarcange@redhat.com>
> Cc: linux-alpha@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: adi-buildroot-devel@lists.sourceforge.net
> Cc: linux-cris-kernel@axis.com
> Cc: linux-ia64@vger.kernel.org
> Cc: linux-m68k@lists.linux-m68k.org
> Cc: linux-am33-list@redhat.com
> Cc: linux-parisc@vger.kernel.org
> Cc: linuxppc-dev@lists.ozlabs.org
> Cc: linux-s390@vger.kernel.org
> Cc: linux-sh@vger.kernel.org
> Cc: sparclinux@vger.kernel.org
> Cc: linux-xtensa@linux-xtensa.org
> Cc: linux-api@vger.kernel.org
> Cc: linux-arch@vger.kernel.org
> Cc: linux-mm@kvack.org
> ---
>  arch/x86/entry/syscalls/syscall_32.tbl | 1 +
>  arch/x86/entry/syscalls/syscall_64.tbl | 1 +
>  include/linux/syscalls.h               | 2 ++
>  include/uapi/asm-generic/unistd.h      | 4 +++-
>  kernel/sys_ni.c                        | 1 +
>  mm/mlock.c                             | 8 ++++++++
>  6 files changed, 16 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/x86/entry/syscalls/syscall_32.tbl b/arch/x86/entry/syscalls/syscall_32.tbl
> index ef8187f..8e06da6 100644
> --- a/arch/x86/entry/syscalls/syscall_32.tbl
> +++ b/arch/x86/entry/syscalls/syscall_32.tbl
> @@ -365,3 +365,4 @@
>  356	i386	memfd_create		sys_memfd_create
>  357	i386	bpf			sys_bpf
>  358	i386	execveat		sys_execveat			stub32_execveat
> +360	i386	mlock2			sys_mlock2
> diff --git a/arch/x86/entry/syscalls/syscall_64.tbl b/arch/x86/entry/syscalls/syscall_64.tbl
> index 9ef32d5..67601e7 100644
> --- a/arch/x86/entry/syscalls/syscall_64.tbl
> +++ b/arch/x86/entry/syscalls/syscall_64.tbl
> @@ -329,6 +329,7 @@
>  320	common	kexec_file_load		sys_kexec_file_load
>  321	common	bpf			sys_bpf
>  322	64	execveat		stub_execveat
> +324	common	mlock2			sys_mlock2
>  
>  #
>  # x32-specific system call numbers start at 512 to avoid cache impact
> diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
> index b45c45b..56a3d59 100644
> --- a/include/linux/syscalls.h
> +++ b/include/linux/syscalls.h
> @@ -884,4 +884,6 @@ asmlinkage long sys_execveat(int dfd, const char __user *filename,
>  			const char __user *const __user *argv,
>  			const char __user *const __user *envp, int flags);
>  
> +asmlinkage long sys_mlock2(unsigned long start, size_t len, int flags);
> +
>  #endif
> diff --git a/include/uapi/asm-generic/unistd.h b/include/uapi/asm-generic/unistd.h
> index e016bd9..14a6013 100644
> --- a/include/uapi/asm-generic/unistd.h
> +++ b/include/uapi/asm-generic/unistd.h
> @@ -709,9 +709,11 @@ __SYSCALL(__NR_memfd_create, sys_memfd_create)
>  __SYSCALL(__NR_bpf, sys_bpf)
>  #define __NR_execveat 281
>  __SC_COMP(__NR_execveat, sys_execveat, compat_sys_execveat)
> +#define __NR_mlock2 282
> +__SYSCALL(__NR_mlock2, sys_mlock2)
>  
>  #undef __NR_syscalls
> -#define __NR_syscalls 282
> +#define __NR_syscalls 283
>  
>  /*
>   * All syscalls below here should go away really,
> diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
> index 7995ef5..4818b71 100644
> --- a/kernel/sys_ni.c
> +++ b/kernel/sys_ni.c
> @@ -193,6 +193,7 @@ cond_syscall(sys_mlock);
>  cond_syscall(sys_munlock);
>  cond_syscall(sys_mlockall);
>  cond_syscall(sys_munlockall);
> +cond_syscall(sys_mlock2);
>  cond_syscall(sys_mincore);
>  cond_syscall(sys_madvise);
>  cond_syscall(sys_mremap);
> diff --git a/mm/mlock.c b/mm/mlock.c
> index 5692ee5..3094f27 100644
> --- a/mm/mlock.c
> +++ b/mm/mlock.c
> @@ -643,6 +643,14 @@ SYSCALL_DEFINE2(mlock, unsigned long, start, size_t, len)
>  	return do_mlock(start, len, VM_LOCKED);
>  }
>  
> +SYSCALL_DEFINE3(mlock2, unsigned long, start, size_t, len, int, flags)
> +{
> +	if (flags)
> +		return -EINVAL;
> +
> +	return do_mlock(start, len, VM_LOCKED);
> +}
> +
>  SYSCALL_DEFINE2(munlock, unsigned long, start, size_t, len)
>  {
>  	int ret;
> -- 
> 1.9.1

-- 
Michal Hocko
SUSE Labs

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH v7 2/6] mm: mlock: Add new mlock system call

[Michal Hocko]

On Sun 09-08-15 01:22:52, Eric B Munson wrote:
> With the refactored mlock code, introduce a new system call for mlock.
> The new call will allow the user to specify what lock states are being
> added.  mlock2 is trivial at the moment, but a follow on patch will add
> a new mlock state making it useful.

Looks good to me

Acked-by: Michal Hocko <mhocko@suse.com>

> Signed-off-by: Eric B Munson <emunson@akamai.com>
> Acked-by: Vlastimil Babka <vbabka@suse.cz>
> Cc: Michal Hocko <mhocko@suse.cz>
> Cc: Vlastimil Babka <vbabka@suse.cz>
> Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
> Cc: Geert Uytterhoeven <geert@linux-m68k.org>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Stephen Rothwell <sfr@canb.auug.org.au>
> Cc: Guenter Roeck <linux@roeck-us.net>
> Cc: Andrea Arcangeli <aarcange@redhat.com>
> Cc: linux-alpha@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: adi-buildroot-devel@lists.sourceforge.net
> Cc: linux-cris-kernel@axis.com
> Cc: linux-ia64@vger.kernel.org
> Cc: linux-m68k@lists.linux-m68k.org
> Cc: linux-am33-list@redhat.com
> Cc: linux-parisc@vger.kernel.org
> Cc: linuxppc-dev@lists.ozlabs.org
> Cc: linux-s390@vger.kernel.org
> Cc: linux-sh@vger.kernel.org
> Cc: sparclinux@vger.kernel.org
> Cc: linux-xtensa@linux-xtensa.org
> Cc: linux-api@vger.kernel.org
> Cc: linux-arch@vger.kernel.org
> Cc: linux-mm@kvack.org
> ---
>  arch/x86/entry/syscalls/syscall_32.tbl | 1 +
>  arch/x86/entry/syscalls/syscall_64.tbl | 1 +
>  include/linux/syscalls.h               | 2 ++
>  include/uapi/asm-generic/unistd.h      | 4 +++-
>  kernel/sys_ni.c                        | 1 +
>  mm/mlock.c                             | 8 ++++++++
>  6 files changed, 16 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/x86/entry/syscalls/syscall_32.tbl b/arch/x86/entry/syscalls/syscall_32.tbl
> index ef8187f..8e06da6 100644
> --- a/arch/x86/entry/syscalls/syscall_32.tbl
> +++ b/arch/x86/entry/syscalls/syscall_32.tbl
> @@ -365,3 +365,4 @@
>  356	i386	memfd_create		sys_memfd_create
>  357	i386	bpf			sys_bpf
>  358	i386	execveat		sys_execveat			stub32_execveat
> +360	i386	mlock2			sys_mlock2
> diff --git a/arch/x86/entry/syscalls/syscall_64.tbl b/arch/x86/entry/syscalls/syscall_64.tbl
> index 9ef32d5..67601e7 100644
> --- a/arch/x86/entry/syscalls/syscall_64.tbl
> +++ b/arch/x86/entry/syscalls/syscall_64.tbl
> @@ -329,6 +329,7 @@
>  320	common	kexec_file_load		sys_kexec_file_load
>  321	common	bpf			sys_bpf
>  322	64	execveat		stub_execveat
> +324	common	mlock2			sys_mlock2
>  
>  #
>  # x32-specific system call numbers start at 512 to avoid cache impact
> diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
> index b45c45b..56a3d59 100644
> --- a/include/linux/syscalls.h
> +++ b/include/linux/syscalls.h
> @@ -884,4 +884,6 @@ asmlinkage long sys_execveat(int dfd, const char __user *filename,
>  			const char __user *const __user *argv,
>  			const char __user *const __user *envp, int flags);
>  
> +asmlinkage long sys_mlock2(unsigned long start, size_t len, int flags);
> +
>  #endif
> diff --git a/include/uapi/asm-generic/unistd.h b/include/uapi/asm-generic/unistd.h
> index e016bd9..14a6013 100644
> --- a/include/uapi/asm-generic/unistd.h
> +++ b/include/uapi/asm-generic/unistd.h
> @@ -709,9 +709,11 @@ __SYSCALL(__NR_memfd_create, sys_memfd_create)
>  __SYSCALL(__NR_bpf, sys_bpf)
>  #define __NR_execveat 281
>  __SC_COMP(__NR_execveat, sys_execveat, compat_sys_execveat)
> +#define __NR_mlock2 282
> +__SYSCALL(__NR_mlock2, sys_mlock2)
>  
>  #undef __NR_syscalls
> -#define __NR_syscalls 282
> +#define __NR_syscalls 283
>  
>  /*
>   * All syscalls below here should go away really,
> diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
> index 7995ef5..4818b71 100644
> --- a/kernel/sys_ni.c
> +++ b/kernel/sys_ni.c
> @@ -193,6 +193,7 @@ cond_syscall(sys_mlock);
>  cond_syscall(sys_munlock);
>  cond_syscall(sys_mlockall);
>  cond_syscall(sys_munlockall);
> +cond_syscall(sys_mlock2);
>  cond_syscall(sys_mincore);
>  cond_syscall(sys_madvise);
>  cond_syscall(sys_mremap);
> diff --git a/mm/mlock.c b/mm/mlock.c
> index 5692ee5..3094f27 100644
> --- a/mm/mlock.c
> +++ b/mm/mlock.c
> @@ -643,6 +643,14 @@ SYSCALL_DEFINE2(mlock, unsigned long, start, size_t, len)
>  	return do_mlock(start, len, VM_LOCKED);
>  }
>  
> +SYSCALL_DEFINE3(mlock2, unsigned long, start, size_t, len, int, flags)
> +{
> +	if (flags)
> +		return -EINVAL;
> +
> +	return do_mlock(start, len, VM_LOCKED);
> +}
> +
>  SYSCALL_DEFINE2(munlock, unsigned long, start, size_t, len)
>  {
>  	int ret;
> -- 
> 1.9.1

-- 
Michal Hocko
SUSE Labs