From: Vineet Gupta <Vineet.Gupta1@synopsys.com>
To: Andrew Morton <akpm@linux-foundation.org>,
"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>,
"Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>,
Mel Gorman <mgorman@suse.de>,
Matthew Wilcox <matthew.r.wilcox@intel.com>,
Minchan Kim <minchan@kernel.org>
Cc: linux-arch@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-mm@kvack.org, Vineet Gupta <Vineet.Gupta1@synopsys.com>
Subject: [PATCH v2 10/12] mm,thp: introduce flush_pmd_tlb_range
Date: Tue, 22 Sep 2015 16:04:54 +0530 [thread overview]
Message-ID: <1442918096-17454-11-git-send-email-vgupta@synopsys.com> (raw)
In-Reply-To: <1442918096-17454-1-git-send-email-vgupta@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
---
mm/huge_memory.c | 2 +-
mm/pgtable-generic.c | 25 +++++++++++++++++++------
2 files changed, 20 insertions(+), 7 deletions(-)
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 4b06b8db9df2..e25eb3d2081a 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -1880,7 +1880,7 @@ static int __split_huge_page_map(struct page *page,
* here). But it is generally safer to never allow
* small and huge TLB entries for the same virtual
* address to be loaded simultaneously. So instead of
- * doing "pmd_populate(); flush_tlb_range();" we first
+ * doing "pmd_populate(); flush_pmd_tlb_range();" we first
* mark the current pmd notpresent (atomically because
* here the pmd_trans_huge and pmd_trans_splitting
* must remain set at all times on the pmd until the
diff --git a/mm/pgtable-generic.c b/mm/pgtable-generic.c
index c9c59bb75a17..b0fed9a4776e 100644
--- a/mm/pgtable-generic.c
+++ b/mm/pgtable-generic.c
@@ -84,6 +84,19 @@ pte_t ptep_clear_flush(struct vm_area_struct *vma, unsigned long address,
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+#ifndef __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
+
+/*
+ * ARCHes with special requirements for evicting THP backing TLB entries can
+ * implement this. Otherwise also, it can help optimizing thp flush operation.
+ * flush_tlb_range() can have optimization to nuke the entire TLB if flush span
+ * is greater than a threashhold, which will likely be true for a single
+ * huge page.
+ * e.g. see arch/arc: flush_pmd_tlb_range
+ */
+#define flush_pmd_tlb_range(vma, addr, end) flush_tlb_range(vma, addr, end)
+#endif
+
#ifndef __HAVE_ARCH_PMDP_SET_ACCESS_FLAGS
int pmdp_set_access_flags(struct vm_area_struct *vma,
unsigned long address, pmd_t *pmdp,
@@ -93,7 +106,7 @@ int pmdp_set_access_flags(struct vm_area_struct *vma,
VM_BUG_ON(address & ~HPAGE_PMD_MASK);
if (changed) {
set_pmd_at(vma->vm_mm, address, pmdp, entry);
- flush_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
+ flush_pmd_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
}
return changed;
}
@@ -107,7 +120,7 @@ int pmdp_clear_flush_young(struct vm_area_struct *vma,
VM_BUG_ON(address & ~HPAGE_PMD_MASK);
young = pmdp_test_and_clear_young(vma, address, pmdp);
if (young)
- flush_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
+ flush_pmd_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
return young;
}
#endif
@@ -120,7 +133,7 @@ pmd_t pmdp_huge_clear_flush(struct vm_area_struct *vma, unsigned long address,
VM_BUG_ON(address & ~HPAGE_PMD_MASK);
VM_BUG_ON(!pmd_trans_huge(*pmdp));
pmd = pmdp_huge_get_and_clear(vma->vm_mm, address, pmdp);
- flush_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
+ flush_pmd_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
return pmd;
}
#endif
@@ -133,7 +146,7 @@ void pmdp_splitting_flush(struct vm_area_struct *vma, unsigned long address,
VM_BUG_ON(address & ~HPAGE_PMD_MASK);
set_pmd_at(vma->vm_mm, address, pmdp, pmd);
/* tlb flush only to serialize against gup-fast */
- flush_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
+ flush_pmd_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
}
#endif
@@ -179,7 +192,7 @@ void pmdp_invalidate(struct vm_area_struct *vma, unsigned long address,
{
pmd_t entry = *pmdp;
set_pmd_at(vma->vm_mm, address, pmdp, pmd_mknotpresent(entry));
- flush_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
+ flush_pmd_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
}
#endif
@@ -196,7 +209,7 @@ pmd_t pmdp_collapse_flush(struct vm_area_struct *vma, unsigned long address,
VM_BUG_ON(address & ~HPAGE_PMD_MASK);
VM_BUG_ON(pmd_trans_huge(*pmdp));
pmd = pmdp_huge_get_and_clear(vma->vm_mm, address, pmdp);
- flush_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
+ flush_pmd_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
return pmd;
}
#endif
--
1.9.1
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2015-09-22 10:34 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-22 10:34 [PATCH v2 00/12] THP support for ARC Vineet Gupta
2015-09-22 10:34 ` [PATCH v2 01/12] ARC: mm: switch pgtable_to to pte_t * Vineet Gupta
2015-09-22 10:34 ` [PATCH v2 02/12] ARC: mm: pte flags comsetic cleanups, comments Vineet Gupta
2015-09-22 10:34 ` [PATCH v2 03/12] ARC: mm: Introduce PTE_SPECIAL Vineet Gupta
2015-09-22 10:34 ` [PATCH v2 04/12] Documentation/features/vm: pte_special now supported by ARC Vineet Gupta
2015-09-22 10:34 ` [PATCH v2 05/12] ARCv2: mm: THP support Vineet Gupta
2015-09-22 10:34 ` [PATCH v2 06/12] ARCv2: mm: THP: boot validation/reporting Vineet Gupta
2015-09-22 10:34 ` [PATCH v2 07/12] Documentation/features/vm: THP now supported by ARC Vineet Gupta
2015-09-22 10:34 ` [PATCH v2 08/12] mm: move some code around Vineet Gupta
2015-10-09 9:48 ` Kirill A. Shutemov
2015-10-09 9:48 ` Kirill A. Shutemov
2015-10-09 10:01 ` Vineet Gupta
2015-09-22 10:34 ` [PATCH v2 09/12] mm,thp: reduce ifdef'ery for THP in generic code Vineet Gupta
2015-10-09 9:53 ` Kirill A. Shutemov
2015-10-09 9:53 ` Kirill A. Shutemov
2015-10-09 10:10 ` Vineet Gupta
2015-10-09 10:28 ` Vineet Gupta
2015-09-22 10:34 ` Vineet Gupta [this message]
2015-10-09 10:08 ` [PATCH v2 10/12] mm,thp: introduce flush_pmd_tlb_range Kirill A. Shutemov
2015-10-09 10:08 ` Kirill A. Shutemov
2015-10-09 10:54 ` Vineet Gupta
2015-09-22 10:34 ` [PATCH v2 11/12] ARCv2: mm: THP: Implement flush_pmd_tlb_range() optimization Vineet Gupta
2015-09-22 10:34 ` [PATCH v2 12/12] ARCv2: Add a DT which enables THP Vineet Gupta
2015-10-01 6:02 ` [PATCH v2 00/12] THP support for ARC Vineet Gupta
2015-10-09 9:33 ` Vineet Gupta
2015-10-09 10:10 ` Kirill A. Shutemov
2015-10-09 11:29 ` Vineet Gupta
2015-10-09 11:43 ` Kirill A. Shutemov
2015-10-09 11:43 ` Kirill A. Shutemov
2015-10-09 11:52 ` Vineet Gupta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1442918096-17454-11-git-send-email-vgupta@synopsys.com \
--to=vineet.gupta1@synopsys.com \
--cc=akpm@linux-foundation.org \
--cc=aneesh.kumar@linux.vnet.ibm.com \
--cc=kirill.shutemov@linux.intel.com \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=matthew.r.wilcox@intel.com \
--cc=mgorman@suse.de \
--cc=minchan@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).