From: Dave Martin <Dave.Martin@arm.com> To: linux-arm-kernel@lists.infradead.org Cc: linux-arch@vger.kernel.org, Okamoto Takayuki <tokamoto@jp.fujitsu.com>, libc-alpha@sourceware.org, Ard Biesheuvel <ard.biesheuvel@linaro.org>, Szabolcs Nagy <szabolcs.nagy@arm.com>, Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will.deacon@arm.com>, kvmarm@lists.cs.columbia.edu Subject: [PATCH v5 22/30] arm64/sve: Add prctl controls for userspace vector length management Date: Tue, 31 Oct 2017 15:51:14 +0000 [thread overview] Message-ID: <1509465082-30427-23-git-send-email-Dave.Martin@arm.com> (raw) In-Reply-To: <1509465082-30427-1-git-send-email-Dave.Martin@arm.com> This patch adds two arm64-specific prctls, to permit userspace to control its vector length: * PR_SVE_SET_VL: set the thread's SVE vector length and vector length inheritance mode. * PR_SVE_GET_VL: get the same information. Although these prctls resemble instruction set features in the SVE architecture, they provide additional control: the vector length inheritance mode is Linux-specific and nothing to do with the architecture, and the architecture does not permit EL0 to set its own vector length directly. Both can be used in portable tools without requiring the use of SVE instructions. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alex Bennée <alex.bennee@linaro.org> --- **Dropped at v3** Reviewed-by: Alex Bennée <alex.bennee@linaro.org> See v3 posting for history. --- arch/arm64/include/asm/fpsimd.h | 14 +++++++++++ arch/arm64/include/asm/processor.h | 4 +++ arch/arm64/kernel/fpsimd.c | 50 ++++++++++++++++++++++++++++++++++++++ include/uapi/linux/prctl.h | 4 +++ kernel/sys.c | 12 +++++++++ 5 files changed, 84 insertions(+) diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h index d754e5a..b868412 100644 --- a/arch/arm64/include/asm/fpsimd.h +++ b/arch/arm64/include/asm/fpsimd.h @@ -17,6 +17,7 @@ #define __ASM_FP_H #include <asm/ptrace.h> +#include <asm/errno.h> #ifndef __ASSEMBLY__ @@ -98,6 +99,9 @@ extern void sve_sync_from_fpsimd_zeropad(struct task_struct *task); extern int sve_set_vector_length(struct task_struct *task, unsigned long vl, unsigned long flags); +extern int sve_set_current_vl(unsigned long arg); +extern int sve_get_current_vl(void); + /* * Probing and setup functions. * Calls to these functions must be serialised with one another. @@ -114,6 +118,16 @@ static inline void fpsimd_release_task(struct task_struct *task) { } static inline void sve_sync_to_fpsimd(struct task_struct *task) { } static inline void sve_sync_from_fpsimd_zeropad(struct task_struct *task) { } +static inline int sve_set_current_vl(unsigned long arg) +{ + return -EINVAL; +} + +static inline int sve_get_current_vl(void) +{ + return -EINVAL; +} + static inline void sve_init_vq_map(void) { } static inline void sve_update_vq_map(void) { } static inline int sve_verify_vq_map(void) { return 0; } diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h index c6fddb0..023cacb 100644 --- a/arch/arm64/include/asm/processor.h +++ b/arch/arm64/include/asm/processor.h @@ -217,5 +217,9 @@ static inline void spin_lock_prefetch(const void *ptr) int cpu_enable_pan(void *__unused); int cpu_enable_cache_maint_trap(void *__unused); +/* Userspace interface for PR_SVE_{SET,GET}_VL prctl()s: */ +#define SVE_SET_VL(arg) sve_set_current_vl(arg) +#define SVE_GET_VL() sve_get_current_vl() + #endif /* __ASSEMBLY__ */ #endif /* __ASM_PROCESSOR_H */ diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c index 5715622..cbb2c63 100644 --- a/arch/arm64/kernel/fpsimd.c +++ b/arch/arm64/kernel/fpsimd.c @@ -29,6 +29,7 @@ #include <linux/irqflags.h> #include <linux/init.h> #include <linux/percpu.h> +#include <linux/prctl.h> #include <linux/preempt.h> #include <linux/prctl.h> #include <linux/ptrace.h> @@ -558,6 +559,55 @@ int sve_set_vector_length(struct task_struct *task, } /* + * Encode the current vector length and flags for return. + * This is only required for prctl(): ptrace has separate fields + * + * flags are as for sve_set_vector_length(). + */ +static int sve_prctl_status(unsigned long flags) +{ + int ret; + + if (flags & PR_SVE_SET_VL_ONEXEC) + ret = current->thread.sve_vl_onexec; + else + ret = current->thread.sve_vl; + + if (test_thread_flag(TIF_SVE_VL_INHERIT)) + ret |= PR_SVE_VL_INHERIT; + + return ret; +} + +/* PR_SVE_SET_VL */ +int sve_set_current_vl(unsigned long arg) +{ + unsigned long vl, flags; + int ret; + + vl = arg & PR_SVE_VL_LEN_MASK; + flags = arg & ~vl; + + if (!system_supports_sve()) + return -EINVAL; + + ret = sve_set_vector_length(current, vl, flags); + if (ret) + return ret; + + return sve_prctl_status(flags); +} + +/* PR_SVE_GET_VL */ +int sve_get_current_vl(void) +{ + if (!system_supports_sve()) + return -EINVAL; + + return sve_prctl_status(0); +} + +/* * Bitmap for temporary storage of the per-CPU set of supported vector lengths * during secondary boot. */ diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h index 1b64901..1ef9370 100644 --- a/include/uapi/linux/prctl.h +++ b/include/uapi/linux/prctl.h @@ -198,7 +198,11 @@ struct prctl_mm_map { # define PR_CAP_AMBIENT_CLEAR_ALL 4 /* arm64 Scalable Vector Extension controls */ +/* Flag values must be kept in sync with ptrace NT_ARM_SVE interface */ +#define PR_SVE_SET_VL 48 /* set task vector length */ # define PR_SVE_SET_VL_ONEXEC (1 << 18) /* defer effect until exec */ +#define PR_SVE_GET_VL 49 /* get task vector length */ +/* Bits common to PR_SVE_SET_VL and PR_SVE_GET_VL */ # define PR_SVE_VL_LEN_MASK 0xffff # define PR_SVE_VL_INHERIT (1 << 17) /* inherit across exec */ diff --git a/kernel/sys.c b/kernel/sys.c index 9aebc29..c541916 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -110,6 +110,12 @@ #ifndef SET_FP_MODE # define SET_FP_MODE(a,b) (-EINVAL) #endif +#ifndef SVE_SET_VL +# define SVE_SET_VL(a) (-EINVAL) +#endif +#ifndef SVE_GET_VL +# define SVE_GET_VL() (-EINVAL) +#endif /* * this is where the system-wide overflow UID and GID are defined, for @@ -2385,6 +2391,12 @@ SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3, case PR_GET_FP_MODE: error = GET_FP_MODE(me); break; + case PR_SVE_SET_VL: + error = SVE_SET_VL(arg2); + break; + case PR_SVE_GET_VL: + error = SVE_GET_VL(); + break; default: error = -EINVAL; break; -- 2.1.4 _______________________________________________ kvmarm mailing list kvmarm@lists.cs.columbia.edu https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
WARNING: multiple messages have this Message-ID (diff)
From: Dave Martin <Dave.Martin@arm.com> To: linux-arm-kernel@lists.infradead.org Cc: "Catalin Marinas" <catalin.marinas@arm.com>, "Will Deacon" <will.deacon@arm.com>, "Ard Biesheuvel" <ard.biesheuvel@linaro.org>, "Alex Bennée" <alex.bennee@linaro.org>, "Szabolcs Nagy" <szabolcs.nagy@arm.com>, "Okamoto Takayuki" <tokamoto@jp.fujitsu.com>, kvmarm@lists.cs.columbia.edu, libc-alpha@sourceware.org, linux-arch@vger.kernel.org Subject: [PATCH v5 22/30] arm64/sve: Add prctl controls for userspace vector length management Date: Tue, 31 Oct 2017 15:51:14 +0000 [thread overview] Message-ID: <1509465082-30427-23-git-send-email-Dave.Martin@arm.com> (raw) Message-ID: <20171031155114.U54Aqx8STdZHGq9iNdqiyRdBkNe-VUuf_bCJyP_zSPk@z> (raw) In-Reply-To: <1509465082-30427-1-git-send-email-Dave.Martin@arm.com> This patch adds two arm64-specific prctls, to permit userspace to control its vector length: * PR_SVE_SET_VL: set the thread's SVE vector length and vector length inheritance mode. * PR_SVE_GET_VL: get the same information. Although these prctls resemble instruction set features in the SVE architecture, they provide additional control: the vector length inheritance mode is Linux-specific and nothing to do with the architecture, and the architecture does not permit EL0 to set its own vector length directly. Both can be used in portable tools without requiring the use of SVE instructions. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alex Bennée <alex.bennee@linaro.org> --- **Dropped at v3** Reviewed-by: Alex Bennée <alex.bennee@linaro.org> See v3 posting for history. --- arch/arm64/include/asm/fpsimd.h | 14 +++++++++++ arch/arm64/include/asm/processor.h | 4 +++ arch/arm64/kernel/fpsimd.c | 50 ++++++++++++++++++++++++++++++++++++++ include/uapi/linux/prctl.h | 4 +++ kernel/sys.c | 12 +++++++++ 5 files changed, 84 insertions(+) diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h index d754e5a..b868412 100644 --- a/arch/arm64/include/asm/fpsimd.h +++ b/arch/arm64/include/asm/fpsimd.h @@ -17,6 +17,7 @@ #define __ASM_FP_H #include <asm/ptrace.h> +#include <asm/errno.h> #ifndef __ASSEMBLY__ @@ -98,6 +99,9 @@ extern void sve_sync_from_fpsimd_zeropad(struct task_struct *task); extern int sve_set_vector_length(struct task_struct *task, unsigned long vl, unsigned long flags); +extern int sve_set_current_vl(unsigned long arg); +extern int sve_get_current_vl(void); + /* * Probing and setup functions. * Calls to these functions must be serialised with one another. @@ -114,6 +118,16 @@ static inline void fpsimd_release_task(struct task_struct *task) { } static inline void sve_sync_to_fpsimd(struct task_struct *task) { } static inline void sve_sync_from_fpsimd_zeropad(struct task_struct *task) { } +static inline int sve_set_current_vl(unsigned long arg) +{ + return -EINVAL; +} + +static inline int sve_get_current_vl(void) +{ + return -EINVAL; +} + static inline void sve_init_vq_map(void) { } static inline void sve_update_vq_map(void) { } static inline int sve_verify_vq_map(void) { return 0; } diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h index c6fddb0..023cacb 100644 --- a/arch/arm64/include/asm/processor.h +++ b/arch/arm64/include/asm/processor.h @@ -217,5 +217,9 @@ static inline void spin_lock_prefetch(const void *ptr) int cpu_enable_pan(void *__unused); int cpu_enable_cache_maint_trap(void *__unused); +/* Userspace interface for PR_SVE_{SET,GET}_VL prctl()s: */ +#define SVE_SET_VL(arg) sve_set_current_vl(arg) +#define SVE_GET_VL() sve_get_current_vl() + #endif /* __ASSEMBLY__ */ #endif /* __ASM_PROCESSOR_H */ diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c index 5715622..cbb2c63 100644 --- a/arch/arm64/kernel/fpsimd.c +++ b/arch/arm64/kernel/fpsimd.c @@ -29,6 +29,7 @@ #include <linux/irqflags.h> #include <linux/init.h> #include <linux/percpu.h> +#include <linux/prctl.h> #include <linux/preempt.h> #include <linux/prctl.h> #include <linux/ptrace.h> @@ -558,6 +559,55 @@ int sve_set_vector_length(struct task_struct *task, } /* + * Encode the current vector length and flags for return. + * This is only required for prctl(): ptrace has separate fields + * + * flags are as for sve_set_vector_length(). + */ +static int sve_prctl_status(unsigned long flags) +{ + int ret; + + if (flags & PR_SVE_SET_VL_ONEXEC) + ret = current->thread.sve_vl_onexec; + else + ret = current->thread.sve_vl; + + if (test_thread_flag(TIF_SVE_VL_INHERIT)) + ret |= PR_SVE_VL_INHERIT; + + return ret; +} + +/* PR_SVE_SET_VL */ +int sve_set_current_vl(unsigned long arg) +{ + unsigned long vl, flags; + int ret; + + vl = arg & PR_SVE_VL_LEN_MASK; + flags = arg & ~vl; + + if (!system_supports_sve()) + return -EINVAL; + + ret = sve_set_vector_length(current, vl, flags); + if (ret) + return ret; + + return sve_prctl_status(flags); +} + +/* PR_SVE_GET_VL */ +int sve_get_current_vl(void) +{ + if (!system_supports_sve()) + return -EINVAL; + + return sve_prctl_status(0); +} + +/* * Bitmap for temporary storage of the per-CPU set of supported vector lengths * during secondary boot. */ diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h index 1b64901..1ef9370 100644 --- a/include/uapi/linux/prctl.h +++ b/include/uapi/linux/prctl.h @@ -198,7 +198,11 @@ struct prctl_mm_map { # define PR_CAP_AMBIENT_CLEAR_ALL 4 /* arm64 Scalable Vector Extension controls */ +/* Flag values must be kept in sync with ptrace NT_ARM_SVE interface */ +#define PR_SVE_SET_VL 48 /* set task vector length */ # define PR_SVE_SET_VL_ONEXEC (1 << 18) /* defer effect until exec */ +#define PR_SVE_GET_VL 49 /* get task vector length */ +/* Bits common to PR_SVE_SET_VL and PR_SVE_GET_VL */ # define PR_SVE_VL_LEN_MASK 0xffff # define PR_SVE_VL_INHERIT (1 << 17) /* inherit across exec */ diff --git a/kernel/sys.c b/kernel/sys.c index 9aebc29..c541916 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -110,6 +110,12 @@ #ifndef SET_FP_MODE # define SET_FP_MODE(a,b) (-EINVAL) #endif +#ifndef SVE_SET_VL +# define SVE_SET_VL(a) (-EINVAL) +#endif +#ifndef SVE_GET_VL +# define SVE_GET_VL() (-EINVAL) +#endif /* * this is where the system-wide overflow UID and GID are defined, for @@ -2385,6 +2391,12 @@ SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3, case PR_GET_FP_MODE: error = GET_FP_MODE(me); break; + case PR_SVE_SET_VL: + error = SVE_SET_VL(arg2); + break; + case PR_SVE_GET_VL: + error = SVE_GET_VL(); + break; default: error = -EINVAL; break; -- 2.1.4
next prev parent reply other threads:[~2017-10-31 15:51 UTC|newest] Thread overview: 106+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-10-31 15:50 [PATCH v5 00/30] ARM Scalable Vector Extension (SVE) Dave Martin 2017-10-31 15:50 ` Dave Martin 2017-10-31 15:50 ` [PATCH v5 01/30] regset: Add support for dynamically sized regsets Dave Martin 2017-11-01 11:42 ` Catalin Marinas 2017-11-01 13:16 ` Dave Martin 2017-11-01 13:16 ` Dave Martin 2017-11-08 11:50 ` Alex Bennée 2017-11-08 11:50 ` Alex Bennée 2017-10-31 15:50 ` [PATCH v5 02/30] arm64: fpsimd: Correctly annotate exception helpers called from asm Dave Martin 2017-10-31 15:50 ` Dave Martin 2017-11-01 11:42 ` Catalin Marinas 2017-10-31 15:50 ` [PATCH v5 03/30] arm64: signal: Verify extra data is user-readable in sys_rt_sigreturn Dave Martin 2017-10-31 15:50 ` Dave Martin 2017-11-01 11:43 ` Catalin Marinas 2017-10-31 15:50 ` [PATCH v5 04/30] arm64: KVM: Hide unsupported AArch64 CPU features from guests Dave Martin 2017-11-01 4:47 ` Christoffer Dall 2017-11-01 10:26 ` Dave Martin 2017-11-02 8:15 ` Christoffer Dall 2017-11-02 9:20 ` Dave Martin 2017-11-02 11:01 ` Dave Martin 2017-11-02 19:18 ` Christoffer Dall 2017-10-31 15:50 ` [PATCH v5 05/30] arm64: efi: Add missing Kconfig dependency on KERNEL_MODE_NEON Dave Martin 2017-10-31 15:50 ` Dave Martin 2017-10-31 15:50 ` [PATCH v5 06/30] arm64: Port deprecated instruction emulation to new sysctl interface Dave Martin 2017-10-31 15:50 ` [PATCH v5 07/30] arm64: fpsimd: Simplify uses of {set,clear}_ti_thread_flag() Dave Martin 2017-10-31 15:51 ` [PATCH v5 08/30] arm64/sve: System register and exception syndrome definitions Dave Martin 2017-10-31 15:51 ` [PATCH v5 09/30] arm64/sve: Low-level SVE architectural state manipulation functions Dave Martin 2017-10-31 15:51 ` [PATCH v5 10/30] arm64/sve: Kconfig update and conditional compilation support Dave Martin 2017-10-31 15:51 ` [PATCH v5 11/30] arm64/sve: Signal frame and context structure definition Dave Martin 2017-11-08 16:34 ` Alex Bennée 2017-11-08 16:34 ` Alex Bennée 2017-10-31 15:51 ` [PATCH v5 12/30] arm64/sve: Low-level CPU setup Dave Martin 2017-11-08 16:37 ` Alex Bennée 2017-11-08 16:37 ` Alex Bennée 2017-10-31 15:51 ` [PATCH v5 13/30] arm64/sve: Core task context handling Dave Martin 2017-10-31 15:51 ` Dave Martin 2017-11-09 17:16 ` Alex Bennée 2017-11-09 17:16 ` Alex Bennée 2017-11-09 17:56 ` Dave Martin 2017-11-09 18:06 ` Alex Bennée 2017-11-09 18:06 ` Alex Bennée 2017-10-31 15:51 ` [PATCH v5 14/30] arm64/sve: Support vector length resetting for new processes Dave Martin 2017-10-31 15:51 ` [PATCH v5 15/30] arm64/sve: Signal handling support Dave Martin 2017-10-31 15:51 ` Dave Martin 2017-11-01 14:33 ` Catalin Marinas 2017-11-07 13:22 ` Alex Bennée 2017-11-07 13:22 ` Alex Bennée 2017-11-08 16:11 ` Dave Martin 2017-12-06 19:56 ` Kees Cook 2017-12-07 10:49 ` Will Deacon 2017-12-07 12:03 ` Dave Martin 2017-12-07 18:50 ` Kees Cook 2017-12-11 14:07 ` Will Deacon 2017-12-11 19:23 ` Kees Cook 2017-12-12 10:40 ` Will Deacon 2017-12-12 11:11 ` Dave Martin 2017-12-12 19:36 ` Kees Cook 2017-12-12 19:36 ` Kees Cook 2017-10-31 15:51 ` [PATCH v5 16/30] arm64/sve: Backend logic for setting the vector length Dave Martin 2017-10-31 15:51 ` Dave Martin 2017-11-10 10:27 ` Alex Bennée 2017-11-10 10:27 ` Alex Bennée 2017-10-31 15:51 ` [PATCH v5 17/30] arm64: cpufeature: Move sys_caps_initialised declarations Dave Martin 2017-10-31 15:51 ` [PATCH v5 18/30] arm64/sve: Probe SVE capabilities and usable vector lengths Dave Martin 2017-10-31 15:51 ` Dave Martin 2017-10-31 15:51 ` [PATCH v5 19/30] arm64/sve: Preserve SVE registers around kernel-mode NEON use Dave Martin 2017-10-31 15:51 ` [PATCH v5 20/30] arm64/sve: Preserve SVE registers around EFI runtime service calls Dave Martin 2017-10-31 15:51 ` [PATCH v5 21/30] arm64/sve: ptrace and ELF coredump support Dave Martin 2017-10-31 15:51 ` Dave Martin [this message] 2017-10-31 15:51 ` [PATCH v5 22/30] arm64/sve: Add prctl controls for userspace vector length management Dave Martin 2017-10-31 15:51 ` [PATCH v5 23/30] arm64/sve: Add sysctl to set the default vector length for new processes Dave Martin 2017-10-31 15:51 ` Dave Martin 2017-10-31 15:51 ` [PATCH v5 24/30] arm64/sve: KVM: Prevent guests from using SVE Dave Martin 2017-10-31 15:51 ` Dave Martin 2017-10-31 15:51 ` [PATCH v5 25/30] arm64/sve: KVM: Treat guest SVE use as undefined instruction execution Dave Martin 2017-10-31 15:51 ` [PATCH v5 26/30] arm64/sve: KVM: Hide SVE from CPU features exposed to guests Dave Martin 2017-10-31 15:51 ` [PATCH v5 27/30] arm64/sve: Detect SVE and activate runtime support Dave Martin 2017-10-31 15:51 ` Dave Martin [not found] ` <1509465082-30427-1-git-send-email-Dave.Martin-5wv7dgnIgG8@public.gmane.org> 2017-10-31 15:51 ` [PATCH v5 28/30] arm64/sve: Add documentation Dave Martin 2017-10-31 15:51 ` Dave Martin 2017-11-02 16:32 ` [PATCH v5 00/30] ARM Scalable Vector Extension (SVE) Will Deacon 2017-11-02 16:32 ` Will Deacon [not found] ` <20171102163248.GB595-5wv7dgnIgG8@public.gmane.org> 2017-11-02 17:04 ` Dave P Martin 2017-11-02 17:04 ` Dave P Martin 2017-10-31 15:51 ` [RFC PATCH v5 29/30] arm64: signal: Report signal frame size to userspace via auxv Dave Martin 2017-10-31 15:51 ` Dave Martin 2017-10-31 15:51 ` [RFC PATCH v5 30/30] arm64/sve: signal: Include SVE when computing AT_MINSIGSTKSZ Dave Martin 2017-10-31 15:51 ` Dave Martin 2017-11-29 15:04 ` [PATCH v5 00/30] ARM Scalable Vector Extension (SVE) Alex Bennée 2017-11-29 15:04 ` Alex Bennée [not found] ` <877eu9dt3n.fsf-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> 2017-11-29 15:21 ` Will Deacon 2017-11-29 15:21 ` Will Deacon [not found] ` <20171129152140.GD10650-5wv7dgnIgG8@public.gmane.org> 2017-11-29 15:37 ` Dave Martin 2017-11-29 15:37 ` Dave Martin 2018-01-08 14:49 ` Yury Norov 2018-01-08 14:49 ` Yury Norov 2018-01-09 16:51 ` Yury Norov 2018-01-09 16:51 ` Yury Norov 2018-01-15 17:22 ` Dave Martin 2018-01-15 17:22 ` Dave Martin [not found] ` <20180115172201.GW22781-M5GwZQ6tE7x5pKCnmE3YQBJ8xKzm50AiAL8bYrjMMd8@public.gmane.org> 2018-01-16 10:11 ` Yury Norov 2018-01-16 10:11 ` Yury Norov 2018-01-16 16:05 ` Dave Martin 2018-01-16 16:05 ` Dave Martin 2018-01-15 16:55 ` Dave Martin 2018-01-15 16:55 ` Dave Martin
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1509465082-30427-23-git-send-email-Dave.Martin@arm.com \ --to=dave.martin@arm.com \ --cc=ard.biesheuvel@linaro.org \ --cc=catalin.marinas@arm.com \ --cc=kvmarm@lists.cs.columbia.edu \ --cc=libc-alpha@sourceware.org \ --cc=linux-arch@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=szabolcs.nagy@arm.com \ --cc=tokamoto@jp.fujitsu.com \ --cc=will.deacon@arm.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).