From: Lennert Buytenhek <buytenh-OLH4Qvv75CYX/NnBR394Jw@public.gmane.org>
To: linux-arch-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Saeed Bishara <saeed-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org>,
Dale Farnsworth <dale-1viX+2+OPRFcxvNqPlePQg@public.gmane.org>,
Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
Tzachi Perelstein
<tzachi-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org>,
Nicolas Pitre <nico-mo2vmkxb4K0@public.gmane.org>
Subject: [PATCH 4/7] ehci-orion: mbus decode window support
Date: Fri, 7 Mar 2008 11:22:25 +0100 [thread overview]
Message-ID: <20080307102225.GD11977@xi.wantstofly.org> (raw)
In-Reply-To: <20080307101913.GA11918-mfnYTeDhw6uOVk/H6u/4e9i2O/JbrIOy@public.gmane.org>
Make it possible to pass mbus_dram_target_info to the ehci-orion
driver via the platform data, and make the ehci-orion driver
program the window registers based on this data if it is passed in.
Signed-off-by: Lennert Buytenhek <buytenh-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org>
Index: linux-2.6.25-rc4/drivers/usb/host/ehci-orion.c
===================================================================
--- linux-2.6.25-rc4.orig/drivers/usb/host/ehci-orion.c
+++ linux-2.6.25-rc4/drivers/usb/host/ehci-orion.c
@@ -11,15 +11,19 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/mbus.h>
#include <asm/arch/orion.h>
+#include <asm/arch/platform.h>
#define rdl(off) __raw_readl(hcd->regs + (off))
#define wrl(off, val) __raw_writel((val), hcd->regs + (off))
-#define USB_CAUSE 0x310
-#define USB_MASK 0x314
#define USB_CMD 0x140
#define USB_MODE 0x1a8
+#define USB_CAUSE 0x310
+#define USB_MASK 0x314
+#define USB_WINDOW_CTRL(i) (0x320 + ((i) << 4))
+#define USB_WINDOW_BASE(i) (0x324 + ((i) << 4))
#define USB_IPG 0x360
#define USB_PHY_PWR_CTRL 0x400
#define USB_PHY_TX_CTRL 0x420
@@ -162,8 +166,30 @@ static const struct hc_driver ehci_orion
.bus_resume = ehci_bus_resume,
};
+static void __init
+ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
+ struct mbus_dram_target_info *dram)
+{
+ int i;
+
+ for (i = 0; i < 4; i++) {
+ wrl(USB_WINDOW_CTRL(i), 0);
+ wrl(USB_WINDOW_BASE(i), 0);
+ }
+
+ for (i = 0; i < dram->num_cs; i++) {
+ struct mbus_dram_window *cs = dram->cs + i;
+
+ wrl(USB_WINDOW_CTRL(i), ((cs->size - 1) & 0xffff0000) |
+ (cs->mbus_attr << 8) |
+ (dram->mbus_dram_target_id << 4) | 1);
+ wrl(USB_WINDOW_BASE(i), cs->base);
+ }
+}
+
static int __init ehci_orion_drv_probe(struct platform_device *pdev)
{
+ struct orion_ehci_data *pd = pdev->dev.platform_data;
struct resource *res;
struct usb_hcd *hcd;
struct ehci_hcd *ehci;
@@ -227,6 +253,12 @@ static int __init ehci_orion_drv_probe(s
ehci->sbrn = 0x20;
/*
+ * (Re-)program MBUS remapping windows if we are asked to.
+ */
+ if (pd != NULL && pd->dram != NULL)
+ ehci_orion_conf_mbus_windows(hcd, pd->dram);
+
+ /*
* setup Orion USB controller
*/
orion_usb_setup(hcd);
Index: linux-2.6.25-rc4/include/asm-arm/arch-orion/platform.h
===================================================================
--- linux-2.6.25-rc4.orig/include/asm-arm/arch-orion/platform.h
+++ linux-2.6.25-rc4/include/asm-arm/arch-orion/platform.h
@@ -12,6 +12,14 @@
#define __ASM_ARCH_PLATFORM_H__
/*
+ * Orion EHCI platform driver data.
+ */
+struct orion_ehci_data {
+ struct mbus_dram_target_info *dram;
+};
+
+
+/*
* Device bus NAND private data
*/
struct orion_nand_data {
@@ -22,4 +30,5 @@ struct orion_nand_data {
u8 width; /* buswidth */
};
+
#endif
--
To unsubscribe from this list: send the line "unsubscribe linux-arch" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Lennert Buytenhek <buytenh@wantstofly.org>
To: linux-arch@vger.kernel.org
Cc: Saeed Bishara <saeed@marvell.com>,
Dale Farnsworth <dale@farnsworth.org>,
Russell King <linux@arm.linux.org.uk>,
Tzachi Perelstein <tzachi@marvell.com>,
Nicolas Pitre <nico@cam.org>
Subject: [PATCH 4/7] ehci-orion: mbus decode window support
Date: Fri, 7 Mar 2008 11:22:25 +0100 [thread overview]
Message-ID: <20080307102225.GD11977@xi.wantstofly.org> (raw)
Message-ID: <20080307102225.a4ToJQKlJLJhbFgOCY32UprNEYYloSEU3brnt2wUq2c@z> (raw)
In-Reply-To: <20080307101913.GA11918@xi.wantstofly.org>
Make it possible to pass mbus_dram_target_info to the ehci-orion
driver via the platform data, and make the ehci-orion driver
program the window registers based on this data if it is passed in.
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Index: linux-2.6.25-rc4/drivers/usb/host/ehci-orion.c
===================================================================
--- linux-2.6.25-rc4.orig/drivers/usb/host/ehci-orion.c
+++ linux-2.6.25-rc4/drivers/usb/host/ehci-orion.c
@@ -11,15 +11,19 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/mbus.h>
#include <asm/arch/orion.h>
+#include <asm/arch/platform.h>
#define rdl(off) __raw_readl(hcd->regs + (off))
#define wrl(off, val) __raw_writel((val), hcd->regs + (off))
-#define USB_CAUSE 0x310
-#define USB_MASK 0x314
#define USB_CMD 0x140
#define USB_MODE 0x1a8
+#define USB_CAUSE 0x310
+#define USB_MASK 0x314
+#define USB_WINDOW_CTRL(i) (0x320 + ((i) << 4))
+#define USB_WINDOW_BASE(i) (0x324 + ((i) << 4))
#define USB_IPG 0x360
#define USB_PHY_PWR_CTRL 0x400
#define USB_PHY_TX_CTRL 0x420
@@ -162,8 +166,30 @@ static const struct hc_driver ehci_orion
.bus_resume = ehci_bus_resume,
};
+static void __init
+ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
+ struct mbus_dram_target_info *dram)
+{
+ int i;
+
+ for (i = 0; i < 4; i++) {
+ wrl(USB_WINDOW_CTRL(i), 0);
+ wrl(USB_WINDOW_BASE(i), 0);
+ }
+
+ for (i = 0; i < dram->num_cs; i++) {
+ struct mbus_dram_window *cs = dram->cs + i;
+
+ wrl(USB_WINDOW_CTRL(i), ((cs->size - 1) & 0xffff0000) |
+ (cs->mbus_attr << 8) |
+ (dram->mbus_dram_target_id << 4) | 1);
+ wrl(USB_WINDOW_BASE(i), cs->base);
+ }
+}
+
static int __init ehci_orion_drv_probe(struct platform_device *pdev)
{
+ struct orion_ehci_data *pd = pdev->dev.platform_data;
struct resource *res;
struct usb_hcd *hcd;
struct ehci_hcd *ehci;
@@ -227,6 +253,12 @@ static int __init ehci_orion_drv_probe(s
ehci->sbrn = 0x20;
/*
+ * (Re-)program MBUS remapping windows if we are asked to.
+ */
+ if (pd != NULL && pd->dram != NULL)
+ ehci_orion_conf_mbus_windows(hcd, pd->dram);
+
+ /*
* setup Orion USB controller
*/
orion_usb_setup(hcd);
Index: linux-2.6.25-rc4/include/asm-arm/arch-orion/platform.h
===================================================================
--- linux-2.6.25-rc4.orig/include/asm-arm/arch-orion/platform.h
+++ linux-2.6.25-rc4/include/asm-arm/arch-orion/platform.h
@@ -12,6 +12,14 @@
#define __ASM_ARCH_PLATFORM_H__
/*
+ * Orion EHCI platform driver data.
+ */
+struct orion_ehci_data {
+ struct mbus_dram_target_info *dram;
+};
+
+
+/*
* Device bus NAND private data
*/
struct orion_nand_data {
@@ -22,4 +30,5 @@ struct orion_nand_data {
u8 width; /* buswidth */
};
+
#endif
next prev parent reply other threads:[~2008-03-07 10:22 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-07 10:19 [PATCH 0/7][RFC] Move Marvell MBUS window handling into drivers Lennert Buytenhek
2008-03-07 10:19 ` Lennert Buytenhek
[not found] ` <20080307101913.GA11918-mfnYTeDhw6uOVk/H6u/4e9i2O/JbrIOy@public.gmane.org>
2008-03-07 10:20 ` [PATCH 1/7] introduce mbus DRAM target info abstraction Lennert Buytenhek
2008-03-07 10:20 ` Lennert Buytenhek
2008-03-07 10:21 ` [PATCH 2/7] Orion: initialise mbus DRAM target info on boot Lennert Buytenhek
2008-03-07 10:21 ` Lennert Buytenhek
2008-03-07 10:22 ` [PATCH 3/7] Orion: make PCIe/PCI support use mbus DRAM info Lennert Buytenhek
2008-03-07 10:22 ` Lennert Buytenhek
2008-03-07 10:22 ` Lennert Buytenhek [this message]
2008-03-07 10:22 ` [PATCH 4/7] ehci-orion: mbus decode window support Lennert Buytenhek
2008-03-07 10:22 ` [PATCH 5/7] mv643xx_eth: " Lennert Buytenhek
2008-03-07 10:22 ` Lennert Buytenhek
2008-03-07 10:23 ` [PATCH 6/7] sata_mv: " Lennert Buytenhek
2008-03-07 10:23 ` Lennert Buytenhek
2008-03-07 10:23 ` [PATCH 7/7] Orion: leave peripheral window programming up to drivers Lennert Buytenhek
2008-03-07 10:23 ` Lennert Buytenhek
2008-03-10 8:31 ` [PATCH 0/7][RFC] Move Marvell MBUS window handling into drivers Tzachi Perelstein
2008-03-10 8:31 ` Tzachi Perelstein
2008-03-16 11:59 ` Russell King - ARM Linux
2008-03-16 11:59 ` Russell King - ARM Linux
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080307102225.GD11977@xi.wantstofly.org \
--to=buytenh-olh4qvv75cyx/nnbr394jw@public.gmane.org \
--cc=dale-1viX+2+OPRFcxvNqPlePQg@public.gmane.org \
--cc=linux-arch-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
--cc=nico-mo2vmkxb4K0@public.gmane.org \
--cc=saeed-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org \
--cc=tzachi-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox