From: akpm@linux-foundation.org
To: mm-commits@vger.kernel.org
Cc: fujita.tomonori@lab.ntt.co.jp, linux-arch@vger.kernel.org
Subject: + dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign.patch added to -mm tree
Date: Thu, 08 Jul 2010 12:53:29 -0700 [thread overview]
Message-ID: <201007081953.o68JrUpl025247@imap1.linux-foundation.org> (raw)
The patch titled
dma-mapping: rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN
has been added to the -mm tree. Its filename is
dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: dma-mapping: rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Now each architecture has the own dma_get_cache_alignment implementation.
dma_get_cache_alignment returns the minimum DMA alignment. Architectures
define it as ARCH_KMALLOC_MINALIGN (it's used to make sure that malloc'ed
buffer is DMA-safe; the buffer doesn't share a cache with the others). So
we can unify dma_get_cache_alignment implementations.
This patch:
dma_get_cache_alignment() needs to know if an architecture defines
ARCH_KMALLOC_MINALIGN or not (needs to know if architecture has DMA
alignment restriction). However, slab.h define ARCH_KMALLOC_MINALIGN if
architectures doesn't define it.
Let's rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN.
ARCH_KMALLOC_MINALIGN is used only in the internals of slab/slob/slub
(except for crypto).
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/arm/include/asm/cache.h | 2 +-
arch/avr32/include/asm/cache.h | 2 +-
arch/blackfin/include/asm/cache.h | 2 +-
arch/frv/include/asm/mem-layout.h | 2 +-
arch/m68k/include/asm/cache.h | 2 +-
arch/microblaze/include/asm/page.h | 2 +-
arch/mips/include/asm/mach-generic/kmalloc.h | 2 +-
arch/mips/include/asm/mach-ip27/kmalloc.h | 2 +-
arch/mips/include/asm/mach-ip32/kmalloc.h | 4 ++--
arch/mips/include/asm/mach-tx49xx/kmalloc.h | 2 +-
arch/mn10300/include/asm/cache.h | 2 +-
arch/powerpc/include/asm/page_32.h | 2 +-
arch/sh/include/asm/page.h | 2 +-
arch/xtensa/include/asm/cache.h | 2 +-
include/linux/slab_def.h | 4 +++-
include/linux/slob_def.h | 4 +++-
include/linux/slub_def.h | 8 +++++---
17 files changed, 26 insertions(+), 20 deletions(-)
diff -puN arch/arm/include/asm/cache.h~dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign arch/arm/include/asm/cache.h
--- a/arch/arm/include/asm/cache.h~dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign
+++ a/arch/arm/include/asm/cache.h
@@ -14,7 +14,7 @@
* cache before the transfer is done, causing old data to be seen by
* the CPU.
*/
-#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
/*
* With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.
diff -puN arch/avr32/include/asm/cache.h~dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign arch/avr32/include/asm/cache.h
--- a/arch/avr32/include/asm/cache.h~dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign
+++ a/arch/avr32/include/asm/cache.h
@@ -11,7 +11,7 @@
* cache before the transfer is done, causing old data to be seen by
* the CPU.
*/
-#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
#ifndef __ASSEMBLER__
struct cache_info {
diff -puN arch/blackfin/include/asm/cache.h~dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign arch/blackfin/include/asm/cache.h
--- a/arch/blackfin/include/asm/cache.h~dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign
+++ a/arch/blackfin/include/asm/cache.h
@@ -15,7 +15,7 @@
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
#define SMP_CACHE_BYTES L1_CACHE_BYTES
-#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
#ifdef CONFIG_SMP
#define __cacheline_aligned
diff -puN arch/frv/include/asm/mem-layout.h~dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign arch/frv/include/asm/mem-layout.h
--- a/arch/frv/include/asm/mem-layout.h~dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign
+++ a/arch/frv/include/asm/mem-layout.h
@@ -35,7 +35,7 @@
* the slab must be aligned such that load- and store-double instructions don't
* fault if used
*/
-#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
#define ARCH_SLAB_MINALIGN L1_CACHE_BYTES
/*****************************************************************************/
diff -puN arch/m68k/include/asm/cache.h~dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign arch/m68k/include/asm/cache.h
--- a/arch/m68k/include/asm/cache.h~dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign
+++ a/arch/m68k/include/asm/cache.h
@@ -8,6 +8,6 @@
#define L1_CACHE_SHIFT 4
#define L1_CACHE_BYTES (1<< L1_CACHE_SHIFT)
-#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
#endif
diff -puN arch/microblaze/include/asm/page.h~dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign arch/microblaze/include/asm/page.h
--- a/arch/microblaze/include/asm/page.h~dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign
+++ a/arch/microblaze/include/asm/page.h
@@ -40,7 +40,7 @@
#ifndef __ASSEMBLY__
/* MS be sure that SLAB allocates aligned objects */
-#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
#define ARCH_SLAB_MINALIGN L1_CACHE_BYTES
diff -puN arch/mips/include/asm/mach-generic/kmalloc.h~dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign arch/mips/include/asm/mach-generic/kmalloc.h
--- a/arch/mips/include/asm/mach-generic/kmalloc.h~dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign
+++ a/arch/mips/include/asm/mach-generic/kmalloc.h
@@ -7,7 +7,7 @@
* Total overkill for most systems but need as a safe default.
* Set this one if any device in the system might do non-coherent DMA.
*/
-#define ARCH_KMALLOC_MINALIGN 128
+#define ARCH_DMA_MINALIGN 128
#endif
#endif /* __ASM_MACH_GENERIC_KMALLOC_H */
diff -puN arch/mips/include/asm/mach-ip27/kmalloc.h~dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign arch/mips/include/asm/mach-ip27/kmalloc.h
--- a/arch/mips/include/asm/mach-ip27/kmalloc.h~dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign
+++ a/arch/mips/include/asm/mach-ip27/kmalloc.h
@@ -2,7 +2,7 @@
#define __ASM_MACH_IP27_KMALLOC_H
/*
- * All happy, no need to define ARCH_KMALLOC_MINALIGN
+ * All happy, no need to define ARCH_DMA_MINALIGN
*/
#endif /* __ASM_MACH_IP27_KMALLOC_H */
diff -puN arch/mips/include/asm/mach-ip32/kmalloc.h~dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign arch/mips/include/asm/mach-ip32/kmalloc.h
--- a/arch/mips/include/asm/mach-ip32/kmalloc.h~dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign
+++ a/arch/mips/include/asm/mach-ip32/kmalloc.h
@@ -3,9 +3,9 @@
#if defined(CONFIG_CPU_R5000) || defined(CONFIG_CPU_RM7000)
-#define ARCH_KMALLOC_MINALIGN 32
+#define ARCH_DMA_MINALIGN 32
#else
-#define ARCH_KMALLOC_MINALIGN 128
+#define ARCH_DMA_MINALIGN 128
#endif
#endif /* __ASM_MACH_IP32_KMALLOC_H */
diff -puN arch/mips/include/asm/mach-tx49xx/kmalloc.h~dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign arch/mips/include/asm/mach-tx49xx/kmalloc.h
--- a/arch/mips/include/asm/mach-tx49xx/kmalloc.h~dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign
+++ a/arch/mips/include/asm/mach-tx49xx/kmalloc.h
@@ -2,7 +2,7 @@
#define __ASM_MACH_TX49XX_KMALLOC_H
/*
- * All happy, no need to define ARCH_KMALLOC_MINALIGN
+ * All happy, no need to define ARCH_DMA_MINALIGN
*/
#endif /* __ASM_MACH_TX49XX_KMALLOC_H */
diff -puN arch/mn10300/include/asm/cache.h~dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign arch/mn10300/include/asm/cache.h
--- a/arch/mn10300/include/asm/cache.h~dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign
+++ a/arch/mn10300/include/asm/cache.h
@@ -21,7 +21,7 @@
#define L1_CACHE_DISPARITY L1_CACHE_NENTRIES * L1_CACHE_BYTES
#endif
-#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
/* data cache purge registers
* - read from the register to unconditionally purge that cache line
diff -puN arch/powerpc/include/asm/page_32.h~dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign arch/powerpc/include/asm/page_32.h
--- a/arch/powerpc/include/asm/page_32.h~dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign
+++ a/arch/powerpc/include/asm/page_32.h
@@ -10,7 +10,7 @@
#define VM_DATA_DEFAULT_FLAGS VM_DATA_DEFAULT_FLAGS32
#ifdef CONFIG_NOT_COHERENT_CACHE
-#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
#endif
#ifdef CONFIG_PTE_64BIT
diff -puN arch/sh/include/asm/page.h~dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign arch/sh/include/asm/page.h
--- a/arch/sh/include/asm/page.h~dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign
+++ a/arch/sh/include/asm/page.h
@@ -180,7 +180,7 @@ typedef struct page *pgtable_t;
* Some drivers need to perform DMA into kmalloc'ed buffers
* and so we have to increase the kmalloc minalign for this.
*/
-#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
#ifdef CONFIG_SUPERH64
/*
diff -puN arch/xtensa/include/asm/cache.h~dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign arch/xtensa/include/asm/cache.h
--- a/arch/xtensa/include/asm/cache.h~dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign
+++ a/arch/xtensa/include/asm/cache.h
@@ -29,6 +29,6 @@
# define CACHE_WAY_SIZE ICACHE_WAY_SIZE
#endif
-#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
#endif /* _XTENSA_CACHE_H */
diff -puN include/linux/slab_def.h~dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign include/linux/slab_def.h
--- a/include/linux/slab_def.h~dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign
+++ a/include/linux/slab_def.h
@@ -17,7 +17,6 @@
#include <trace/events/kmem.h>
-#ifndef ARCH_KMALLOC_MINALIGN
/*
* Enforce a minimum alignment for the kmalloc caches.
* Usually, the kmalloc caches are cache_line_size() aligned, except when
@@ -27,6 +26,9 @@
* ARCH_KMALLOC_MINALIGN allows that.
* Note that increasing this value may disable some debug features.
*/
+#ifdef ARCH_DMA_MINALIGN
+#define ARCH_KMALLOC_MINALIGN ARCH_DMA_MINALIGN
+#else
#define ARCH_KMALLOC_MINALIGN __alignof__(unsigned long long)
#endif
diff -puN include/linux/slob_def.h~dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign include/linux/slob_def.h
--- a/include/linux/slob_def.h~dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign
+++ a/include/linux/slob_def.h
@@ -1,7 +1,9 @@
#ifndef __LINUX_SLOB_DEF_H
#define __LINUX_SLOB_DEF_H
-#ifndef ARCH_KMALLOC_MINALIGN
+#ifdef ARCH_DMA_MINALIGN
+#define ARCH_KMALLOC_MINALIGN ARCH_DMA_MINALIGN
+#else
#define ARCH_KMALLOC_MINALIGN __alignof__(unsigned long)
#endif
diff -puN include/linux/slub_def.h~dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign include/linux/slub_def.h
--- a/include/linux/slub_def.h~dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign
+++ a/include/linux/slub_def.h
@@ -106,15 +106,17 @@ struct kmem_cache {
/*
* Kmalloc subsystem.
*/
-#if defined(ARCH_KMALLOC_MINALIGN) && ARCH_KMALLOC_MINALIGN > 8
-#define KMALLOC_MIN_SIZE ARCH_KMALLOC_MINALIGN
+#if defined(ARCH_DMA_MINALIGN) && ARCH_DMA_MINALIGN > 8
+#define KMALLOC_MIN_SIZE ARCH_DMA_MINALIGN
#else
#define KMALLOC_MIN_SIZE 8
#endif
#define KMALLOC_SHIFT_LOW ilog2(KMALLOC_MIN_SIZE)
-#ifndef ARCH_KMALLOC_MINALIGN
+#ifdef ARCH_DMA_MINALIGN
+#define ARCH_KMALLOC_MINALIGN ARCH_DMA_MINALIGN
+#else
#define ARCH_KMALLOC_MINALIGN __alignof__(unsigned long long)
#endif
_
Patches currently in -mm which might be from fujita.tomonori@lab.ntt.co.jp are
linux-next.patch
scsi-add-__init-__exit-macros-to-ibmvstgtc.patch
dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign.patch
dma-mapping-unify-dma_get_cache_alignment-implementations.patch
dma-mapping-parisc-set-arch_dma_minalign.patch
next reply other threads:[~2010-07-08 19:53 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-08 19:53 akpm [this message]
2010-07-08 19:53 ` + dma-mapping-rename-arch_kmalloc_minalign-to-arch_dma_minalign.patch added to -mm tree akpm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201007081953.o68JrUpl025247@imap1.linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=fujita.tomonori@lab.ntt.co.jp \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mm-commits@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox