From: Bjorn Helgaas <bhelgaas@google.com>
To: linux-pci@vger.kernel.org
Cc: linux-arch@vger.kernel.org,
Benjamin Herrenschmidt <benh@kernel.crashing.org>
Subject: [PATCH v3 26/34] powerpc/PCI: convert to pci_create_root_bus()
Date: Fri, 28 Oct 2011 16:27:43 -0600 [thread overview]
Message-ID: <20111028222743.30729.97632.stgit@bhelgaas.mtv.corp.google.com> (raw)
In-Reply-To: <20111028222432.30729.8431.stgit@bhelgaas.mtv.corp.google.com>
Convert from pci_create_bus() to pci_create_root_bus(). This way the root
bus resources are correct immediately. This patch doesn't fix a problem
because powerpc fixed the resources before scanning the bus, but it makes
powerpc more consistent with other architectures.
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
arch/powerpc/kernel/pci-common.c | 25 ++++++++++++++-----------
1 files changed, 14 insertions(+), 11 deletions(-)
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 942ced2..8c47c57 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1554,14 +1554,13 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
return pci_enable_resources(dev, mask);
}
-static void __devinit pcibios_setup_phb_resources(struct pci_controller *hose)
+static void __devinit pcibios_setup_phb_resources(struct pci_controller *hose, struct list_head *resources)
{
- struct pci_bus *bus = hose->bus;
struct resource *res;
int i;
/* Hookup PHB IO resource */
- bus->resource[0] = res = &hose->io_resource;
+ res = &hose->io_resource;
if (!res->flags) {
printk(KERN_WARNING "PCI: I/O resource not set for host"
@@ -1579,6 +1578,7 @@ static void __devinit pcibios_setup_phb_resources(struct pci_controller *hose)
(unsigned long long)res->start,
(unsigned long long)res->end,
(unsigned long)res->flags);
+ pci_add_resource(resources, res);
/* Hookup PHB Memory resources */
for (i = 0; i < 3; ++i) {
@@ -1596,12 +1596,12 @@ static void __devinit pcibios_setup_phb_resources(struct pci_controller *hose)
res->flags = IORESOURCE_MEM;
#endif /* CONFIG_PPC32 */
}
- bus->resource[i+1] = res;
pr_debug("PCI: PHB MEM resource %d = %016llx-%016llx [%lx]\n", i,
(unsigned long long)res->start,
(unsigned long long)res->end,
(unsigned long)res->flags);
+ pci_add_resource(resources, res);
}
pr_debug("PCI: PHB MEM offset = %016llx\n",
@@ -1695,6 +1695,7 @@ struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus)
*/
void __devinit pcibios_scan_phb(struct pci_controller *hose)
{
+ LIST_HEAD(resources);
struct pci_bus *bus;
struct device_node *node = hose->dn;
int mode;
@@ -1702,22 +1703,24 @@ void __devinit pcibios_scan_phb(struct pci_controller *hose)
pr_debug("PCI: Scanning PHB %s\n",
node ? node->full_name : "<NO NAME>");
+ /* Get some IO space for the new PHB */
+ pcibios_setup_phb_io_space(hose);
+
+ /* Wire up PHB bus resources */
+ pcibios_setup_phb_resources(hose, &resources);
+
/* Create an empty bus for the toplevel */
- bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, hose);
+ bus = pci_create_root_bus(hose->parent, hose->first_busno,
+ hose->ops, hose, resources);
if (bus == NULL) {
pr_err("Failed to create bus for PCI domain %04x\n",
hose->global_number);
+ pci_free_resource_list(&resources);
return;
}
bus->secondary = hose->first_busno;
hose->bus = bus;
- /* Get some IO space for the new PHB */
- pcibios_setup_phb_io_space(hose);
-
- /* Wire up PHB bus resources */
- pcibios_setup_phb_resources(hose);
-
/* Get probe mode and perform scan */
mode = PCI_PROBE_NORMAL;
if (node && ppc_md.pci_probe_mode)
next prev parent reply other threads:[~2011-10-28 22:27 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-28 22:25 [PATCH v3 00/34] Create PCI root buses with correct resources Bjorn Helgaas
2011-10-28 22:25 ` [PATCH v3 01/34] PCI: add helpers for building PCI bus resource lists Bjorn Helgaas
2011-12-05 19:54 ` Jesse Barnes
2011-10-28 22:25 ` [PATCH v3 02/34] PCI: show host bridges and root bus resources Bjorn Helgaas
2011-10-28 22:25 ` Bjorn Helgaas
2011-10-28 22:25 ` [PATCH v3 03/34] PCI: add pci_create_root_bus() that accepts resource list Bjorn Helgaas
2011-10-28 22:25 ` [PATCH v3 04/34] PCI: add pci_scan_root_bus() " Bjorn Helgaas
2011-10-28 22:25 ` [PATCH v3 05/34] PCI: convert pci_scan_bus() to use pci_create_root_bus() Bjorn Helgaas
2011-10-28 22:26 ` [PATCH v3 06/34] PCI: convert pci_scan_bus_parented() " Bjorn Helgaas
2011-10-28 22:26 ` [PATCH v3 07/34] PCI: deprecate pci_scan_bus_parented() Bjorn Helgaas
2011-10-28 22:26 ` Bjorn Helgaas
2011-10-28 22:26 ` [PATCH v3 08/34] alpha/PCI: convert to pci_scan_root_bus() for correct root bus resources Bjorn Helgaas
2011-10-28 22:26 ` Bjorn Helgaas
2011-12-16 21:24 ` Bjorn Helgaas
2012-01-04 17:38 ` Jesse Barnes
2012-01-04 17:38 ` Jesse Barnes
2011-10-28 22:26 ` [PATCH v3 09/34] arm/PCI: " Bjorn Helgaas
2011-10-28 22:26 ` Bjorn Helgaas
2011-12-23 1:10 ` Bjorn Helgaas
2012-01-04 17:28 ` Jesse Barnes
2012-01-04 17:28 ` Jesse Barnes
2011-10-28 22:26 ` [PATCH v3 10/34] frv/PCI: " Bjorn Helgaas
2011-10-28 22:26 ` Bjorn Helgaas
2011-10-28 22:26 ` [PATCH v3 11/34] ia64/PCI: use pci_create_bus() instead of pci_scan_bus_parented() Bjorn Helgaas
2011-10-28 22:26 ` Bjorn Helgaas
2011-10-28 22:26 ` [PATCH v3 12/34] ia64/PCI: convert to pci_create_root_bus() for correct root bus resources Bjorn Helgaas
2011-10-28 22:26 ` [PATCH v3 13/34] microblaze/PCI: fix pci_bus_for_each_resource() usage Bjorn Helgaas
2011-10-28 22:26 ` [PATCH v3 14/34] microblaze/PCI: make pcibios_setup_phb_resources() static Bjorn Helgaas
2011-10-28 22:26 ` Bjorn Helgaas
2011-10-28 22:26 ` [PATCH v3 15/34] microblaze/PCI: convert to pci_create_root_bus() for correct root bus resources Bjorn Helgaas
2011-10-28 22:26 ` Bjorn Helgaas
2011-10-28 22:26 ` [PATCH v3 16/34] microblaze/PCI: use pci_scan_root_bus() Bjorn Helgaas
2011-10-28 22:26 ` Bjorn Helgaas
2011-10-28 22:26 ` [PATCH v3 17/34] mips/PCI: convert to pci_scan_root_bus() for correct root bus resources Bjorn Helgaas
2011-10-28 22:26 ` Bjorn Helgaas
2011-10-28 22:27 ` [PATCH v3 18/34] mn10300/PCI: " Bjorn Helgaas
2011-10-28 22:27 ` [PATCH v3 19/34] parisc/PCI: dino: use pci_create_bus() instead of pci_scan_bus_parented() Bjorn Helgaas
2011-10-28 22:27 ` Bjorn Helgaas
2011-10-28 22:27 ` [PATCH v3 20/34] parisc/PCI: dino: convert to pci_create_root_bus() for correct root bus resources Bjorn Helgaas
2011-10-28 22:27 ` Bjorn Helgaas
2011-10-28 22:27 ` [PATCH v3 21/34] parisc/PCI: lba: deal with LMMIO/PAT overlaps before creating PCI root bus Bjorn Helgaas
2011-10-28 22:27 ` Bjorn Helgaas
2011-10-28 22:27 ` [PATCH v3 22/34] parisc/PCI: lba: use pci_create_bus() instead of pci_scan_bus_parented() Bjorn Helgaas
2011-10-28 22:27 ` Bjorn Helgaas
2011-10-28 22:27 ` [PATCH v3 23/34] parisc/PCI: lba: convert to pci_create_root_bus() for correct root bus resources Bjorn Helgaas
2011-10-28 22:27 ` [PATCH v3 24/34] powerpc/PCI: make pcibios_setup_phb_resources() static Bjorn Helgaas
2011-10-28 22:27 ` Bjorn Helgaas
2011-10-28 22:27 ` [PATCH v3 25/34] powerpc/PCI: split PHB part out of pcibios_map_io_space() Bjorn Helgaas
2011-10-28 22:27 ` Bjorn Helgaas
2011-12-06 18:07 ` Bjorn Helgaas
2011-10-28 22:27 ` Bjorn Helgaas [this message]
2011-10-28 22:27 ` [PATCH v3 26/34] powerpc/PCI: convert to pci_create_root_bus() Bjorn Helgaas
2011-12-06 18:09 ` Bjorn Helgaas
2011-12-06 18:09 ` Bjorn Helgaas
2011-10-28 22:27 ` [PATCH v3 27/34] sh/PCI: convert to pci_scan_root_bus() for correct root bus resources Bjorn Helgaas
2011-10-28 22:27 ` Bjorn Helgaas
2011-10-28 22:27 ` [PATCH v3 28/34] sparc/PCI: convert to pci_create_root_bus() Bjorn Helgaas
2011-10-28 22:27 ` Bjorn Helgaas
2011-10-28 22:27 ` [PATCH v3 29/34] sparc32, leon/PCI: convert to pci_scan_root_bus() for correct root bus resources Bjorn Helgaas
2011-10-28 22:27 ` Bjorn Helgaas
2011-10-28 22:28 ` [PATCH v3 30/34] x86/PCI: read Broadcom CNB20LE host bridge info before PCI scan Bjorn Helgaas
2011-10-28 22:28 ` [PATCH v3 31/34] x86/PCI: use pci_scan_bus() instead of pci_scan_bus_parented() Bjorn Helgaas
2011-10-28 22:28 ` Bjorn Helgaas
2011-10-28 22:28 ` [PATCH v3 32/34] x86/PCI: convert to pci_create_root_bus() and pci_scan_root_bus() Bjorn Helgaas
2011-10-28 22:28 ` Bjorn Helgaas
2011-10-28 22:28 ` [PATCH v3 33/34] xtensa/PCI: convert to pci_scan_root_bus() for correct root bus resources Bjorn Helgaas
2011-10-28 22:28 ` [PATCH v3 34/34] PCI: remove pci_create_bus() Bjorn Helgaas
2011-10-29 16:25 ` [PATCH v3 00/34] Create PCI root buses with correct resources Bjorn Helgaas
2011-11-11 16:40 ` Bjorn Helgaas
2011-11-11 16:40 ` Bjorn Helgaas
2011-11-28 18:58 ` Bjorn Helgaas
2011-11-28 18:58 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111028222743.30729.97632.stgit@bhelgaas.mtv.corp.google.com \
--to=bhelgaas@google.com \
--cc=benh@kernel.crashing.org \
--cc=linux-arch@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox