linux-arch.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Eric B Munson <emunson@mgebm.net>
To: Anthony Liguori <aliguori@us.ibm.com>
Cc: avi@redhat.com, mingo@redhat.com, x86@kernel.org, hpa@zytor.com,
	arnd@arndb.de, linux-kernel@vger.kernel.org, kvm@vger.kernel.org,
	linux-arch@vger.kernel.org, ryanh@linux.vnet.ibm.com
Subject: Re: [PATCH 6/6 V2] Add age out of guest paused flag
Date: Tue, 1 Nov 2011 15:51:11 -0400	[thread overview]
Message-ID: <20111101195111.GA9852@mgebm.net> (raw)
In-Reply-To: <4EB049C3.7080206@us.ibm.com>

[-- Attachment #1: Type: text/plain, Size: 5112 bytes --]

On Tue, 01 Nov 2011, Anthony Liguori wrote:

> On 10/31/2011 03:07 PM, Eric B Munson wrote:
> >The KVM_GUEST_PAUSED flag will prevent a guest from compaining about a soft
> >lockup but it can mask real soft lockups if the flag isn't cleared when it is
> >no longer relevant.  This patch adds a kvm ioctl that the hypervisor will use
> >when it resumes a guest to start a timer for aging out the flag.  The time out
> >will be specified by the hypervisor in the ioctl call.
> >
> >Signed-off-by: Eric B Munson<emunson@mgebm.net>
> 
> Why not have the guest clear the flag when it acknowledges it?
> 
> The hypervisor would unconditionally set the bit, and the guest
> would do a testandclear to check if the bit is set.  I think that
> avoids the whole aging business.
> 
> Regards,
> 
> Anthony Liguori

If you have a look at patch 5 of this series, the flag is cleared when the
guest checks the validity of a soft lockup.  However, the aging is meant to
cover the case where the guest never sees a soft lockup.  We don't want this
flag to be stored for ever and end up delaying real soft lockup messages.  With
that case in mind, I thought this was a good/simple compramise.

Eric

> 
> >---
> >Cahnges from V1:
> >  Add host functions for flag management to arch/x86/kvm/x86.c instead of
> >kvmclock.c
> >
> >  arch/x86/include/asm/pvclock.h |    2 ++
> >  arch/x86/kvm/x86.c             |   32 ++++++++++++++++++++++++++++++++
> >  include/linux/kvm.h            |    2 ++
> >  include/linux/kvm_host.h       |    2 ++
> >  4 files changed, 38 insertions(+), 0 deletions(-)
> >
> >diff --git a/arch/x86/include/asm/pvclock.h b/arch/x86/include/asm/pvclock.h
> >index 9312814..e8460b9 100644
> >--- a/arch/x86/include/asm/pvclock.h
> >+++ b/arch/x86/include/asm/pvclock.h
> >@@ -18,6 +18,8 @@ void kvm_set_host_stopped(struct kvm_vcpu *vcpu);
> >
> >  bool kvm_check_and_clear_host_stopped(int cpu);
> >
> >+void kvm_clear_guest_paused(struct kvm_vcpu *vcpu, unsigned int length);
> >+
> >  /*
> >   * Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction,
> >   * yielding a 64-bit result.
> >diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> >index 592ac3b..fb0132a 100644
> >--- a/arch/x86/kvm/x86.c
> >+++ b/arch/x86/kvm/x86.c
> >@@ -46,6 +46,7 @@
> >  #include<linux/hash.h>
> >  #include<linux/pci.h>
> >  #include<trace/events/kvm.h>
> >+#include<linux/timer.h>
> >
> >  #define CREATE_TRACE_POINTS
> >  #include "trace.h"
> >@@ -3300,6 +3301,15 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
> >  		kvm_set_host_stopped(vcpu);
> >  		break;
> >  	}
> >+	case KVM_CLEAR_GUEST_PAUSED: {
> >+		unsigned int length;
> >+		r = -EFAULT;
> >+		if (copy_from_user(&length, argp, sizeof length))
> >+			goto out;
> >+		r = 0;
> >+		kvm_clear_guest_paused(vcpu, length);
> >+		break;
> >+	}
> >  	default:
> >  		r = -EINVAL;
> >  	}
> >@@ -6133,6 +6143,28 @@ void kvm_set_host_stopped(struct kvm_vcpu *vcpu)
> >  }
> >  EXPORT_SYMBOL_GPL(kvm_set_host_stopped);
> >
> >+static void kvm_timer_clear_guest_paused(unsigned long vcpu_addr)
> >+{
> >+	struct kvm_vcpu *vcpu = (struct kvm_vcpu *)vcpu_addr;
> >+	struct pvclock_vcpu_time_info *src =&vcpu->arch.hv_clock;
> >+	src->flags = src->flags&  (~PVCLOCK_GUEST_STOPPED);
> >+}
> >+
> >+/*
> >+ * Host has resumed the guest, we need to clear the guest paused flag so we
> >+ * don't mask any real soft lockups.
> >+ */
> >+void kvm_clear_guest_paused(struct kvm_vcpu *vcpu, unsigned int length)
> >+{
> >+	if (!timer_pending(&vcpu->flag_timer))
> >+		setup_timer(&vcpu->flag_timer,
> >+			    kvm_timer_clear_guest_paused,
> >+			    (unsigned long)vcpu);
> >+	mod_timer(&vcpu->flag_timer,
> >+		  jiffies + (length * HZ));
> >+}
> >+EXPORT_SYMBOL_GPL(kvm_clear_guest_paused);
> >+
> >  int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
> >  				  struct kvm_sregs *sregs)
> >  {
> >diff --git a/include/linux/kvm.h b/include/linux/kvm.h
> >index 87cab0d..bd9724c 100644
> >--- a/include/linux/kvm.h
> >+++ b/include/linux/kvm.h
> >@@ -765,6 +765,8 @@ struct kvm_clock_data {
> >  #define KVM_ALLOCATE_RMA	  _IOR(KVMIO,  0xa9, struct kvm_allocate_rma)
> >  /* VM is being stopped by host */
> >  #define KVM_GUEST_PAUSED	  _IO(KVMIO,   0xaa)
> >+/* Start the timer to clear the paused flag */
> >+#define KVM_CLEAR_GUEST_PAUSED	  _IO(KVMIO,   0xab)
> >
> >  #define KVM_DEV_ASSIGN_ENABLE_IOMMU	(1<<  0)
> >
> >diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
> >index d526231..043af4d 100644
> >--- a/include/linux/kvm_host.h
> >+++ b/include/linux/kvm_host.h
> >@@ -19,6 +19,7 @@
> >  #include<linux/slab.h>
> >  #include<linux/rcupdate.h>
> >  #include<linux/ratelimit.h>
> >+#include<linux/timer.h>
> >  #include<asm/signal.h>
> >
> >  #include<linux/kvm.h>
> >@@ -154,6 +155,7 @@ struct kvm_vcpu {
> >  #endif
> >
> >  	struct kvm_vcpu_arch arch;
> >+	struct timer_list flag_timer;
> >  };
> >
> >  static inline int kvm_vcpu_exiting_guest_mode(struct kvm_vcpu *vcpu)
> 

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

  reply	other threads:[~2011-11-01 19:51 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-10-31 20:07 [PATCH 0/6 V2] Avoid soft lockup message when KVM is stopped by host Eric B Munson
2011-10-31 20:07 ` [PATCH 1/6 V2] Add flag to indicate that a vm was stopped by the host Eric B Munson
2011-10-31 20:07   ` Eric B Munson
2011-11-01 19:22   ` Anthony Liguori
2011-10-31 20:07 ` [PATCH 2/6 V2] Add functions to check if the host has stopped the vm Eric B Munson
2011-10-31 20:07   ` Eric B Munson
2011-11-01 19:28   ` Anthony Liguori
2011-11-01 19:28     ` Anthony Liguori
2011-11-01 20:07     ` Eric B Munson
2011-11-01 20:07       ` Eric B Munson
2011-10-31 20:07 ` [PATCH 3/6 V2] Add ioctl for KVM_GUEST_STOPPED Eric B Munson
2011-10-31 20:07   ` Eric B Munson
2011-11-01 19:32   ` Anthony Liguori
2011-11-01 20:11     ` Eric B Munson
2011-11-01 20:11       ` Eric B Munson
2011-10-31 20:07 ` [PATCH 4/6 V2] Add generic stubs for kvm stop check functions Eric B Munson
2011-10-31 20:07   ` Eric B Munson
2011-10-31 20:07 ` [PATCH 5/6 V2] Add check for suspended vm in softlockup detector Eric B Munson
2011-10-31 20:07   ` Eric B Munson
2011-10-31 20:07 ` [PATCH 6/6 V2] Add age out of guest paused flag Eric B Munson
2011-10-31 20:07   ` Eric B Munson
2011-11-01 19:34   ` Anthony Liguori
2011-11-01 19:51     ` Eric B Munson [this message]
2011-11-01 19:58       ` Anthony Liguori
2011-11-01 20:10         ` Eric B Munson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20111101195111.GA9852@mgebm.net \
    --to=emunson@mgebm.net \
    --cc=aliguori@us.ibm.com \
    --cc=arnd@arndb.de \
    --cc=avi@redhat.com \
    --cc=hpa@zytor.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=ryanh@linux.vnet.ibm.com \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).