[PATCH 0/13] ptrace/hw_breakpoint cleanups/fixes

[PATCH 0/13] ptrace/hw_breakpoint cleanups/fixes

[Oleg Nesterov]

Hello.

Andrew, please find ptrace/hw_breakpoint changes I sent before.

No changes, I only added the acks I got.

4/13 (arch/sh) and the last 2 patches were not acked, but hopefully
the changes are really simple.

Oleg.

[PATCH 0/13] ptrace/hw_breakpoint cleanups/fixes

[Oleg Nesterov]

Hello.

Andrew, please find ptrace/hw_breakpoint changes I sent before.

No changes, I only added the acks I got.

4/13 (arch/sh) and the last 2 patches were not acked, but hopefully
the changes are really simple.

Oleg.

[PATCH 01/13] ptrace/x86: Revert "hw_breakpoints: Fix racy access to ptrace breakpoints"

[Oleg Nesterov]

This reverts commit 87dc669ba25777b67796d7262c569429e58b1ed4.

The patch was fine but we can no longer race with SIGKILL after
9899d11f "ptrace: ensure arch_ptrace/ptrace_request can never race
with SIGKILL", the __TASK_TRACED tracee can't be woken up and
->ptrace_bps[] can't go away.

The patch only removes ptrace_get_breakpoints/ptrace_put_breakpoints
and does a couple of "while at it" cleanups, it doesn't remove other
changes from the reverted commit.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
---
 arch/x86/kernel/ptrace.c |   28 +++++-----------------------
 1 files changed, 5 insertions(+), 23 deletions(-)

diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 29a8120..7a98b21 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -641,9 +641,6 @@ static int ptrace_write_dr7(struct task_struct *tsk, unsigned long data)
 	unsigned len, type;
 	struct perf_event *bp;
 
-	if (ptrace_get_breakpoints(tsk) < 0)
-		return -ESRCH;
-
 	data &= ~DR_CONTROL_RESERVED;
 	old_dr7 = ptrace_get_dr7(thread->ptrace_bps);
 restore:
@@ -692,9 +689,7 @@ restore:
 		goto restore;
 	}
 
-	ptrace_put_breakpoints(tsk);
-
-	return ((orig_ret < 0) ? orig_ret : rc);
+	return orig_ret < 0 ? orig_ret : rc;
 }
 
 /*
@@ -706,18 +701,10 @@ static unsigned long ptrace_get_debugreg(struct task_struct *tsk, int n)
 	unsigned long val = 0;
 
 	if (n < HBP_NUM) {
-		struct perf_event *bp;
+		struct perf_event *bp = thread->ptrace_bps[n];
 
-		if (ptrace_get_breakpoints(tsk) < 0)
-			return -ESRCH;
-
-		bp = thread->ptrace_bps[n];
-		if (!bp)
-			val = 0;
-		else
+		if (bp)
 			val = bp->hw.info.address;
-
-		ptrace_put_breakpoints(tsk);
 	} else if (n == 6) {
 		val = thread->debugreg6;
 	 } else if (n == 7) {
@@ -734,9 +721,6 @@ static int ptrace_set_breakpoint_addr(struct task_struct *tsk, int nr,
 	struct perf_event_attr attr;
 	int err = 0;
 
-	if (ptrace_get_breakpoints(tsk) < 0)
-		return -ESRCH;
-
 	if (!t->ptrace_bps[nr]) {
 		ptrace_breakpoint_init(&attr);
 		/*
@@ -762,7 +746,7 @@ static int ptrace_set_breakpoint_addr(struct task_struct *tsk, int nr,
 		 */
 		if (IS_ERR(bp)) {
 			err = PTR_ERR(bp);
-			goto put;
+			goto out;
 		}
 
 		t->ptrace_bps[nr] = bp;
@@ -773,9 +757,7 @@ static int ptrace_set_breakpoint_addr(struct task_struct *tsk, int nr,
 		attr.bp_addr = addr;
 		err = modify_user_hw_breakpoint(bp, &attr);
 	}
-
-put:
-	ptrace_put_breakpoints(tsk);
+out:
 	return err;
 }
 
-- 
1.5.5.1

[PATCH 01/13] ptrace/x86: Revert "hw_breakpoints: Fix racy access to ptrace breakpoints"

[Oleg Nesterov]

This reverts commit 87dc669ba25777b67796d7262c569429e58b1ed4.

The patch was fine but we can no longer race with SIGKILL after
9899d11f "ptrace: ensure arch_ptrace/ptrace_request can never race
with SIGKILL", the __TASK_TRACED tracee can't be woken up and
->ptrace_bps[] can't go away.

The patch only removes ptrace_get_breakpoints/ptrace_put_breakpoints
and does a couple of "while at it" cleanups, it doesn't remove other
changes from the reverted commit.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
---
 arch/x86/kernel/ptrace.c |   28 +++++-----------------------
 1 files changed, 5 insertions(+), 23 deletions(-)

diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 29a8120..7a98b21 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -641,9 +641,6 @@ static int ptrace_write_dr7(struct task_struct *tsk, unsigned long data)
 	unsigned len, type;
 	struct perf_event *bp;
 
-	if (ptrace_get_breakpoints(tsk) < 0)
-		return -ESRCH;
-
 	data &= ~DR_CONTROL_RESERVED;
 	old_dr7 = ptrace_get_dr7(thread->ptrace_bps);
 restore:
@@ -692,9 +689,7 @@ restore:
 		goto restore;
 	}
 
-	ptrace_put_breakpoints(tsk);
-
-	return ((orig_ret < 0) ? orig_ret : rc);
+	return orig_ret < 0 ? orig_ret : rc;
 }
 
 /*
@@ -706,18 +701,10 @@ static unsigned long ptrace_get_debugreg(struct task_struct *tsk, int n)
 	unsigned long val = 0;
 
 	if (n < HBP_NUM) {
-		struct perf_event *bp;
+		struct perf_event *bp = thread->ptrace_bps[n];
 
-		if (ptrace_get_breakpoints(tsk) < 0)
-			return -ESRCH;
-
-		bp = thread->ptrace_bps[n];
-		if (!bp)
-			val = 0;
-		else
+		if (bp)
 			val = bp->hw.info.address;
-
-		ptrace_put_breakpoints(tsk);
 	} else if (n == 6) {
 		val = thread->debugreg6;
 	 } else if (n == 7) {
@@ -734,9 +721,6 @@ static int ptrace_set_breakpoint_addr(struct task_struct *tsk, int nr,
 	struct perf_event_attr attr;
 	int err = 0;
 
-	if (ptrace_get_breakpoints(tsk) < 0)
-		return -ESRCH;
-
 	if (!t->ptrace_bps[nr]) {
 		ptrace_breakpoint_init(&attr);
 		/*
@@ -762,7 +746,7 @@ static int ptrace_set_breakpoint_addr(struct task_struct *tsk, int nr,
 		 */
 		if (IS_ERR(bp)) {
 			err = PTR_ERR(bp);
-			goto put;
+			goto out;
 		}
 
 		t->ptrace_bps[nr] = bp;
@@ -773,9 +757,7 @@ static int ptrace_set_breakpoint_addr(struct task_struct *tsk, int nr,
 		attr.bp_addr = addr;
 		err = modify_user_hw_breakpoint(bp, &attr);
 	}
-
-put:
-	ptrace_put_breakpoints(tsk);
+out:
 	return err;
 }
 
-- 
1.5.5.1

[PATCH 02/13] ptrace/powerpc: Revert "hw_breakpoints: Fix racy access to ptrace breakpoints"

[Oleg Nesterov]

This reverts commit 07fa7a0a8a586c01a8b416358c7012dcb9dc688d and
removes ptrace_get/put_breakpoints() added by other commits.

The patch was fine but we can no longer race with SIGKILL after
9899d11f "ptrace: ensure arch_ptrace/ptrace_request can never race
with SIGKILL", the __TASK_TRACED tracee can't be woken up and
->ptrace_bps[] can't go away.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/kernel/ptrace.c |   20 --------------------
 1 files changed, 0 insertions(+), 20 deletions(-)

diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 3b14d32..0f28c19 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -974,16 +974,12 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 	hw_brk.type = (data & HW_BRK_TYPE_DABR) | HW_BRK_TYPE_PRIV_ALL;
 	hw_brk.len = 8;
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
-	if (ptrace_get_breakpoints(task) < 0)
-		return -ESRCH;
-
 	bp = thread->ptrace_bps[0];
 	if ((!data) || !(hw_brk.type & HW_BRK_TYPE_RDWR)) {
 		if (bp) {
 			unregister_hw_breakpoint(bp);
 			thread->ptrace_bps[0] = NULL;
 		}
-		ptrace_put_breakpoints(task);
 		return 0;
 	}
 	if (bp) {
@@ -996,11 +992,9 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 
 		ret =  modify_user_hw_breakpoint(bp, &attr);
 		if (ret) {
-			ptrace_put_breakpoints(task);
 			return ret;
 		}
 		thread->ptrace_bps[0] = bp;
-		ptrace_put_breakpoints(task);
 		thread->hw_brk = hw_brk;
 		return 0;
 	}
@@ -1015,12 +1009,9 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 					       ptrace_triggered, NULL, task);
 	if (IS_ERR(bp)) {
 		thread->ptrace_bps[0] = NULL;
-		ptrace_put_breakpoints(task);
 		return PTR_ERR(bp);
 	}
 
-	ptrace_put_breakpoints(task);
-
 #endif /* CONFIG_HAVE_HW_BREAKPOINT */
 	task->thread.hw_brk = hw_brk;
 #else /* CONFIG_PPC_ADV_DEBUG_REGS */
@@ -1439,9 +1430,6 @@ static long ppc_set_hwdebug(struct task_struct *child,
 	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
 		brk.type |= HW_BRK_TYPE_WRITE;
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
-	if (ptrace_get_breakpoints(child) < 0)
-		return -ESRCH;
-
 	/*
 	 * Check if the request is for 'range' breakpoints. We can
 	 * support it if range < 8 bytes.
@@ -1449,12 +1437,10 @@ static long ppc_set_hwdebug(struct task_struct *child,
 	if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE) {
 		len = bp_info->addr2 - bp_info->addr;
 	} else if (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT) {
-		ptrace_put_breakpoints(child);
 		return -EINVAL;
 	}
 	bp = thread->ptrace_bps[0];
 	if (bp) {
-		ptrace_put_breakpoints(child);
 		return -ENOSPC;
 	}
 
@@ -1468,11 +1454,9 @@ static long ppc_set_hwdebug(struct task_struct *child,
 					       ptrace_triggered, NULL, child);
 	if (IS_ERR(bp)) {
 		thread->ptrace_bps[0] = NULL;
-		ptrace_put_breakpoints(child);
 		return PTR_ERR(bp);
 	}
 
-	ptrace_put_breakpoints(child);
 	return 1;
 #endif /* CONFIG_HAVE_HW_BREAKPOINT */
 
@@ -1516,16 +1500,12 @@ static long ppc_del_hwdebug(struct task_struct *child, long data)
 		return -EINVAL;
 
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
-	if (ptrace_get_breakpoints(child) < 0)
-		return -ESRCH;
-
 	bp = thread->ptrace_bps[0];
 	if (bp) {
 		unregister_hw_breakpoint(bp);
 		thread->ptrace_bps[0] = NULL;
 	} else
 		ret = -ENOENT;
-	ptrace_put_breakpoints(child);
 	return ret;
 #else /* CONFIG_HAVE_HW_BREAKPOINT */
 	if (child->thread.hw_brk.address == 0)
-- 
1.5.5.1

[PATCH 02/13] ptrace/powerpc: Revert "hw_breakpoints: Fix racy access to ptrace breakpoints"

[Oleg Nesterov]

This reverts commit 07fa7a0a8a586c01a8b416358c7012dcb9dc688d and
removes ptrace_get/put_breakpoints() added by other commits.

The patch was fine but we can no longer race with SIGKILL after
9899d11f "ptrace: ensure arch_ptrace/ptrace_request can never race
with SIGKILL", the __TASK_TRACED tracee can't be woken up and
->ptrace_bps[] can't go away.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/kernel/ptrace.c |   20 --------------------
 1 files changed, 0 insertions(+), 20 deletions(-)

diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 3b14d32..0f28c19 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -974,16 +974,12 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 	hw_brk.type = (data & HW_BRK_TYPE_DABR) | HW_BRK_TYPE_PRIV_ALL;
 	hw_brk.len = 8;
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
-	if (ptrace_get_breakpoints(task) < 0)
-		return -ESRCH;
-
 	bp = thread->ptrace_bps[0];
 	if ((!data) || !(hw_brk.type & HW_BRK_TYPE_RDWR)) {
 		if (bp) {
 			unregister_hw_breakpoint(bp);
 			thread->ptrace_bps[0] = NULL;
 		}
-		ptrace_put_breakpoints(task);
 		return 0;
 	}
 	if (bp) {
@@ -996,11 +992,9 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 
 		ret =  modify_user_hw_breakpoint(bp, &attr);
 		if (ret) {
-			ptrace_put_breakpoints(task);
 			return ret;
 		}
 		thread->ptrace_bps[0] = bp;
-		ptrace_put_breakpoints(task);
 		thread->hw_brk = hw_brk;
 		return 0;
 	}
@@ -1015,12 +1009,9 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 					       ptrace_triggered, NULL, task);
 	if (IS_ERR(bp)) {
 		thread->ptrace_bps[0] = NULL;
-		ptrace_put_breakpoints(task);
 		return PTR_ERR(bp);
 	}
 
-	ptrace_put_breakpoints(task);
-
 #endif /* CONFIG_HAVE_HW_BREAKPOINT */
 	task->thread.hw_brk = hw_brk;
 #else /* CONFIG_PPC_ADV_DEBUG_REGS */
@@ -1439,9 +1430,6 @@ static long ppc_set_hwdebug(struct task_struct *child,
 	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
 		brk.type |= HW_BRK_TYPE_WRITE;
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
-	if (ptrace_get_breakpoints(child) < 0)
-		return -ESRCH;
-
 	/*
 	 * Check if the request is for 'range' breakpoints. We can
 	 * support it if range < 8 bytes.
@@ -1449,12 +1437,10 @@ static long ppc_set_hwdebug(struct task_struct *child,
 	if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE) {
 		len = bp_info->addr2 - bp_info->addr;
 	} else if (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT) {
-		ptrace_put_breakpoints(child);
 		return -EINVAL;
 	}
 	bp = thread->ptrace_bps[0];
 	if (bp) {
-		ptrace_put_breakpoints(child);
 		return -ENOSPC;
 	}
 
@@ -1468,11 +1454,9 @@ static long ppc_set_hwdebug(struct task_struct *child,
 					       ptrace_triggered, NULL, child);
 	if (IS_ERR(bp)) {
 		thread->ptrace_bps[0] = NULL;
-		ptrace_put_breakpoints(child);
 		return PTR_ERR(bp);
 	}
 
-	ptrace_put_breakpoints(child);
 	return 1;
 #endif /* CONFIG_HAVE_HW_BREAKPOINT */
 
@@ -1516,16 +1500,12 @@ static long ppc_del_hwdebug(struct task_struct *child, long data)
 		return -EINVAL;
 
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
-	if (ptrace_get_breakpoints(child) < 0)
-		return -ESRCH;
-
 	bp = thread->ptrace_bps[0];
 	if (bp) {
 		unregister_hw_breakpoint(bp);
 		thread->ptrace_bps[0] = NULL;
 	} else
 		ret = -ENOENT;
-	ptrace_put_breakpoints(child);
 	return ret;
 #else /* CONFIG_HAVE_HW_BREAKPOINT */
 	if (child->thread.hw_brk.address == 0)
-- 
1.5.5.1

[PATCH 03/13] ptrace/arm: Revert "hw_breakpoints: Fix racy access to ptrace breakpoints"

[Oleg Nesterov]

This reverts commit bf0b8f4b55e591ba417c2dbaff42769e1fc773b0.

The patch was fine but we can no longer race with SIGKILL after
9899d11f "ptrace: ensure arch_ptrace/ptrace_request can never race
with SIGKILL", the __TASK_TRACED tracee can't be woken up and
->ptrace_bps[] can't go away.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Will Deacon <will.deacon@arm.com>
---
 arch/arm/kernel/ptrace.c |    8 --------
 1 files changed, 0 insertions(+), 8 deletions(-)

diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 03deeff..41668e5 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -886,20 +886,12 @@ long arch_ptrace(struct task_struct *child, long request,
 
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
 		case PTRACE_GETHBPREGS:
-			if (ptrace_get_breakpoints(child) < 0)
-				return -ESRCH;
-
 			ret = ptrace_gethbpregs(child, addr,
 						(unsigned long __user *)data);
-			ptrace_put_breakpoints(child);
 			break;
 		case PTRACE_SETHBPREGS:
-			if (ptrace_get_breakpoints(child) < 0)
-				return -ESRCH;
-
 			ret = ptrace_sethbpregs(child, addr,
 						(unsigned long __user *)data);
-			ptrace_put_breakpoints(child);
 			break;
 #endif
 
-- 
1.5.5.1

[PATCH 03/13] ptrace/arm: Revert "hw_breakpoints: Fix racy access to ptrace breakpoints"

[Oleg Nesterov]

This reverts commit bf0b8f4b55e591ba417c2dbaff42769e1fc773b0.

The patch was fine but we can no longer race with SIGKILL after
9899d11f "ptrace: ensure arch_ptrace/ptrace_request can never race
with SIGKILL", the __TASK_TRACED tracee can't be woken up and
->ptrace_bps[] can't go away.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Will Deacon <will.deacon@arm.com>
---
 arch/arm/kernel/ptrace.c |    8 --------
 1 files changed, 0 insertions(+), 8 deletions(-)

diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 03deeff..41668e5 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -886,20 +886,12 @@ long arch_ptrace(struct task_struct *child, long request,
 
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
 		case PTRACE_GETHBPREGS:
-			if (ptrace_get_breakpoints(child) < 0)
-				return -ESRCH;
-
 			ret = ptrace_gethbpregs(child, addr,
 						(unsigned long __user *)data);
-			ptrace_put_breakpoints(child);
 			break;
 		case PTRACE_SETHBPREGS:
-			if (ptrace_get_breakpoints(child) < 0)
-				return -ESRCH;
-
 			ret = ptrace_sethbpregs(child, addr,
 						(unsigned long __user *)data);
-			ptrace_put_breakpoints(child);
 			break;
 #endif
 
-- 
1.5.5.1

[PATCH 04/13] ptrace/sh: Revert "hw_breakpoints: Fix racy access to ptrace breakpoints"

[Oleg Nesterov]

This reverts commit e0ac8457d020c0289ea566917267da9e5e6d9865.

The patch was fine but we can no longer race with SIGKILL after
9899d11f "ptrace: ensure arch_ptrace/ptrace_request can never race
with SIGKILL", the __TASK_TRACED tracee can't be woken up and
->ptrace_bps[] can't go away.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/ptrace_32.c |    4 ----
 1 files changed, 0 insertions(+), 4 deletions(-)

diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c
index 81f999a..668c816 100644
--- a/arch/sh/kernel/ptrace_32.c
+++ b/arch/sh/kernel/ptrace_32.c
@@ -117,11 +117,7 @@ void user_enable_single_step(struct task_struct *child)
 
 	set_tsk_thread_flag(child, TIF_SINGLESTEP);
 
-	if (ptrace_get_breakpoints(child) < 0)
-		return;
-
 	set_single_step(child, pc);
-	ptrace_put_breakpoints(child);
 }
 
 void user_disable_single_step(struct task_struct *child)
-- 
1.5.5.1

[PATCH 05/13] ptrace: Revert "Prepare to fix racy accesses on task breakpoints"

[Oleg Nesterov]

This reverts commit bf26c018490c2fce7fe9b629083b96ce0e6ad019.

The patch was fine but we can no longer race with SIGKILL after
9899d11f "ptrace: ensure arch_ptrace/ptrace_request can never race
with SIGKILL", the __TASK_TRACED tracee can't be woken up and
->ptrace_bps[] can't go away.

Now that ptrace_get_breakpoints/ptrace_put_breakpoints have no
callers, we can kill them and remove task->ptrace_bp_refcnt.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Michael Neuling <mikey@neuling.org>
---
 include/linux/ptrace.h |   10 ----------
 include/linux/sched.h  |    3 ---
 kernel/exit.c          |    2 +-
 kernel/ptrace.c        |   16 ----------------
 4 files changed, 1 insertions(+), 30 deletions(-)

diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h
index 89573a3..07d0df6 100644
--- a/include/linux/ptrace.h
+++ b/include/linux/ptrace.h
@@ -142,9 +142,6 @@ static inline void ptrace_init_task(struct task_struct *child, bool ptrace)
 {
 	INIT_LIST_HEAD(&child->ptrace_entry);
 	INIT_LIST_HEAD(&child->ptraced);
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
-	atomic_set(&child->ptrace_bp_refcnt, 1);
-#endif
 	child->jobctl = 0;
 	child->ptrace = 0;
 	child->parent = child->real_parent;
@@ -351,11 +348,4 @@ extern int task_current_syscall(struct task_struct *target, long *callno,
 				unsigned long args[6], unsigned int maxargs,
 				unsigned long *sp, unsigned long *pc);
 
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
-extern int ptrace_get_breakpoints(struct task_struct *tsk);
-extern void ptrace_put_breakpoints(struct task_struct *tsk);
-#else
-static inline void ptrace_put_breakpoints(struct task_struct *tsk) { }
-#endif /* CONFIG_HAVE_HW_BREAKPOINT */
-
 #endif
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 178a8d9..ebdba8a 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1406,9 +1406,6 @@ struct task_struct {
 	} memcg_batch;
 	unsigned int memcg_kmem_skip_account;
 #endif
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
-	atomic_t ptrace_bp_refcnt;
-#endif
 #ifdef CONFIG_UPROBES
 	struct uprobe_task *utask;
 #endif
diff --git a/kernel/exit.c b/kernel/exit.c
index af2eb3c..0636035 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -819,7 +819,7 @@ void do_exit(long code)
 	/*
 	 * FIXME: do that only when needed, using sched_exit tracepoint
 	 */
-	ptrace_put_breakpoints(tsk);
+	flush_ptrace_hw_breakpoint(tsk);
 
 	exit_notify(tsk, group_dead);
 #ifdef CONFIG_NUMA
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index aed981a..8cc170b 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -1179,19 +1179,3 @@ asmlinkage long compat_sys_ptrace(compat_long_t request, compat_long_t pid,
 	return ret;
 }
 #endif	/* CONFIG_COMPAT */
-
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
-int ptrace_get_breakpoints(struct task_struct *tsk)
-{
-	if (atomic_inc_not_zero(&tsk->ptrace_bp_refcnt))
-		return 0;
-
-	return -1;
-}
-
-void ptrace_put_breakpoints(struct task_struct *tsk)
-{
-	if (atomic_dec_and_test(&tsk->ptrace_bp_refcnt))
-		flush_ptrace_hw_breakpoint(tsk);
-}
-#endif /* CONFIG_HAVE_HW_BREAKPOINT */
-- 
1.5.5.1

[PATCH 05/13] ptrace: Revert "Prepare to fix racy accesses on task breakpoints"

[Oleg Nesterov]

This reverts commit bf26c018490c2fce7fe9b629083b96ce0e6ad019.

The patch was fine but we can no longer race with SIGKILL after
9899d11f "ptrace: ensure arch_ptrace/ptrace_request can never race
with SIGKILL", the __TASK_TRACED tracee can't be woken up and
->ptrace_bps[] can't go away.

Now that ptrace_get_breakpoints/ptrace_put_breakpoints have no
callers, we can kill them and remove task->ptrace_bp_refcnt.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Michael Neuling <mikey@neuling.org>
---
 include/linux/ptrace.h |   10 ----------
 include/linux/sched.h  |    3 ---
 kernel/exit.c          |    2 +-
 kernel/ptrace.c        |   16 ----------------
 4 files changed, 1 insertions(+), 30 deletions(-)

diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h
index 89573a3..07d0df6 100644
--- a/include/linux/ptrace.h
+++ b/include/linux/ptrace.h
@@ -142,9 +142,6 @@ static inline void ptrace_init_task(struct task_struct *child, bool ptrace)
 {
 	INIT_LIST_HEAD(&child->ptrace_entry);
 	INIT_LIST_HEAD(&child->ptraced);
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
-	atomic_set(&child->ptrace_bp_refcnt, 1);
-#endif
 	child->jobctl = 0;
 	child->ptrace = 0;
 	child->parent = child->real_parent;
@@ -351,11 +348,4 @@ extern int task_current_syscall(struct task_struct *target, long *callno,
 				unsigned long args[6], unsigned int maxargs,
 				unsigned long *sp, unsigned long *pc);
 
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
-extern int ptrace_get_breakpoints(struct task_struct *tsk);
-extern void ptrace_put_breakpoints(struct task_struct *tsk);
-#else
-static inline void ptrace_put_breakpoints(struct task_struct *tsk) { }
-#endif /* CONFIG_HAVE_HW_BREAKPOINT */
-
 #endif
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 178a8d9..ebdba8a 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1406,9 +1406,6 @@ struct task_struct {
 	} memcg_batch;
 	unsigned int memcg_kmem_skip_account;
 #endif
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
-	atomic_t ptrace_bp_refcnt;
-#endif
 #ifdef CONFIG_UPROBES
 	struct uprobe_task *utask;
 #endif
diff --git a/kernel/exit.c b/kernel/exit.c
index af2eb3c..0636035 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -819,7 +819,7 @@ void do_exit(long code)
 	/*
 	 * FIXME: do that only when needed, using sched_exit tracepoint
 	 */
-	ptrace_put_breakpoints(tsk);
+	flush_ptrace_hw_breakpoint(tsk);
 
 	exit_notify(tsk, group_dead);
 #ifdef CONFIG_NUMA
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index aed981a..8cc170b 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -1179,19 +1179,3 @@ asmlinkage long compat_sys_ptrace(compat_long_t request, compat_long_t pid,
 	return ret;
 }
 #endif	/* CONFIG_COMPAT */
-
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
-int ptrace_get_breakpoints(struct task_struct *tsk)
-{
-	if (atomic_inc_not_zero(&tsk->ptrace_bp_refcnt))
-		return 0;
-
-	return -1;
-}
-
-void ptrace_put_breakpoints(struct task_struct *tsk)
-{
-	if (atomic_dec_and_test(&tsk->ptrace_bp_refcnt))
-		flush_ptrace_hw_breakpoint(tsk);
-}
-#endif /* CONFIG_HAVE_HW_BREAKPOINT */
-- 
1.5.5.1

[PATCH 06/13] ptrace/x86: simplify the "disable" logic in ptrace_write_dr7()

[Oleg Nesterov]

ptrace_write_dr7() looks unnecessarily overcomplicated. We can
factor out ptrace_modify_breakpoint() and do not do "continue"
twice, just we need to pass the proper "disabled" argument to
ptrace_modify_breakpoint().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
---
 arch/x86/kernel/ptrace.c |   40 +++++++++++++++-------------------------
 1 files changed, 15 insertions(+), 25 deletions(-)

diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 7a98b21..0649f16 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -637,9 +637,7 @@ static int ptrace_write_dr7(struct task_struct *tsk, unsigned long data)
 	struct thread_struct *thread = &(tsk->thread);
 	unsigned long old_dr7;
 	int i, orig_ret = 0, rc = 0;
-	int enabled, second_pass = 0;
-	unsigned len, type;
-	struct perf_event *bp;
+	int second_pass = 0;
 
 	data &= ~DR_CONTROL_RESERVED;
 	old_dr7 = ptrace_get_dr7(thread->ptrace_bps);
@@ -649,30 +647,22 @@ restore:
 	 * appropriate changes to each.
 	 */
 	for (i = 0; i < HBP_NUM; i++) {
-		enabled = decode_dr7(data, i, &len, &type);
-		bp = thread->ptrace_bps[i];
-
-		if (!enabled) {
-			if (bp) {
-				/*
-				 * Don't unregister the breakpoints right-away,
-				 * unless all register_user_hw_breakpoint()
-				 * requests have succeeded. This prevents
-				 * any window of opportunity for debug
-				 * register grabbing by other users.
-				 */
-				if (!second_pass)
-					continue;
-
-				rc = ptrace_modify_breakpoint(bp, len, type,
-							      tsk, 1);
-				if (rc)
-					break;
-			}
-			continue;
+		unsigned len, type;
+		bool disabled = !decode_dr7(data, i, &len, &type);
+		struct perf_event *bp = thread->ptrace_bps[i];
+
+		if (disabled) {
+			/*
+			 * Don't unregister the breakpoints right-away, unless
+			 * all register_user_hw_breakpoint() requests have
+			 * succeeded. This prevents any window of opportunity
+			 * for debug register grabbing by other users.
+			 */
+			if (!bp || !second_pass)
+				continue;
 		}
 
-		rc = ptrace_modify_breakpoint(bp, len, type, tsk, 0);
+		rc = ptrace_modify_breakpoint(bp, len, type, tsk, disabled);
 		if (rc)
 			break;
 	}
-- 
1.5.5.1

[PATCH 06/13] ptrace/x86: simplify the "disable" logic in ptrace_write_dr7()

[Oleg Nesterov]

ptrace_write_dr7() looks unnecessarily overcomplicated. We can
factor out ptrace_modify_breakpoint() and do not do "continue"
twice, just we need to pass the proper "disabled" argument to
ptrace_modify_breakpoint().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
---
 arch/x86/kernel/ptrace.c |   40 +++++++++++++++-------------------------
 1 files changed, 15 insertions(+), 25 deletions(-)

diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 7a98b21..0649f16 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -637,9 +637,7 @@ static int ptrace_write_dr7(struct task_struct *tsk, unsigned long data)
 	struct thread_struct *thread = &(tsk->thread);
 	unsigned long old_dr7;
 	int i, orig_ret = 0, rc = 0;
-	int enabled, second_pass = 0;
-	unsigned len, type;
-	struct perf_event *bp;
+	int second_pass = 0;
 
 	data &= ~DR_CONTROL_RESERVED;
 	old_dr7 = ptrace_get_dr7(thread->ptrace_bps);
@@ -649,30 +647,22 @@ restore:
 	 * appropriate changes to each.
 	 */
 	for (i = 0; i < HBP_NUM; i++) {
-		enabled = decode_dr7(data, i, &len, &type);
-		bp = thread->ptrace_bps[i];
-
-		if (!enabled) {
-			if (bp) {
-				/*
-				 * Don't unregister the breakpoints right-away,
-				 * unless all register_user_hw_breakpoint()
-				 * requests have succeeded. This prevents
-				 * any window of opportunity for debug
-				 * register grabbing by other users.
-				 */
-				if (!second_pass)
-					continue;
-
-				rc = ptrace_modify_breakpoint(bp, len, type,
-							      tsk, 1);
-				if (rc)
-					break;
-			}
-			continue;
+		unsigned len, type;
+		bool disabled = !decode_dr7(data, i, &len, &type);
+		struct perf_event *bp = thread->ptrace_bps[i];
+
+		if (disabled) {
+			/*
+			 * Don't unregister the breakpoints right-away, unless
+			 * all register_user_hw_breakpoint() requests have
+			 * succeeded. This prevents any window of opportunity
+			 * for debug register grabbing by other users.
+			 */
+			if (!bp || !second_pass)
+				continue;
 		}
 
-		rc = ptrace_modify_breakpoint(bp, len, type, tsk, 0);
+		rc = ptrace_modify_breakpoint(bp, len, type, tsk, disabled);
 		if (rc)
 			break;
 	}
-- 
1.5.5.1

[PATCH 07/13] ptrace/x86: dont delay "disable" till second pass in ptrace_write_dr7()

[Oleg Nesterov]

ptrace_write_dr7() skips ptrace_modify_breakpoint(disabled => true)
unless second_pass, this buys nothing but complicates the code and
means that we always do the main loop twice even if "disabled" was
never true.

The comment says:

	Don't unregister the breakpoints right-away,
	unless all register_user_hw_breakpoint()
	requests have succeeded.

Firstly, we do not do register_user_hw_breakpoint(), it was removed
by 24f1e32c "hw-breakpoints: Rewrite the hw-breakpoints layer on top
of perf events".

We are going to restore register_user_hw_breakpoint() (see the next
patch) but this doesn't matter, after 44234adc "hw-breakpoints: Modify
breakpoints without unregistering them" perf_event_disable() can not
hurt, hw_breakpoint_del() does not free the slot.

Remove the "second_pass" check from the main loop and simplify the
code. Since we have to check "bp != NULL" anyway, the patch also
removes the same check in ptrace_modify_breakpoint() and moves the
comment into ptrace_write_dr7().

With this patch the second pass is only needed to restore the saved
old_dr7. This should never fail, so the patch adds WARN_ON() to catch
the potential problems as Frederic suggested.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
---
 arch/x86/kernel/ptrace.c |   53 +++++++++++++++++----------------------------
 1 files changed, 20 insertions(+), 33 deletions(-)

diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 0649f16..98b0a2c 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -609,14 +609,6 @@ ptrace_modify_breakpoint(struct perf_event *bp, int len, int type,
 	int gen_len, gen_type;
 	struct perf_event_attr attr;
 
-	/*
-	 * We should have at least an inactive breakpoint at this
-	 * slot. It means the user is writing dr7 without having
-	 * written the address register first
-	 */
-	if (!bp)
-		return -EINVAL;
-
 	err = arch_bp_generic_fields(len, type, &gen_len, &gen_type);
 	if (err)
 		return err;
@@ -634,52 +626,47 @@ ptrace_modify_breakpoint(struct perf_event *bp, int len, int type,
  */
 static int ptrace_write_dr7(struct task_struct *tsk, unsigned long data)
 {
-	struct thread_struct *thread = &(tsk->thread);
+	struct thread_struct *thread = &tsk->thread;
 	unsigned long old_dr7;
-	int i, orig_ret = 0, rc = 0;
-	int second_pass = 0;
+	bool second_pass = false;
+	int i, rc, ret = 0;
 
 	data &= ~DR_CONTROL_RESERVED;
 	old_dr7 = ptrace_get_dr7(thread->ptrace_bps);
+
 restore:
-	/*
-	 * Loop through all the hardware breakpoints, making the
-	 * appropriate changes to each.
-	 */
+	rc = 0;
 	for (i = 0; i < HBP_NUM; i++) {
 		unsigned len, type;
 		bool disabled = !decode_dr7(data, i, &len, &type);
 		struct perf_event *bp = thread->ptrace_bps[i];
 
-		if (disabled) {
+		if (!bp) {
+			if (disabled)
+				continue;
 			/*
-			 * Don't unregister the breakpoints right-away, unless
-			 * all register_user_hw_breakpoint() requests have
-			 * succeeded. This prevents any window of opportunity
-			 * for debug register grabbing by other users.
+			 * We should have at least an inactive breakpoint at
+			 * this slot. It means the user is writing dr7 without
+			 * having written the address register first.
 			 */
-			if (!bp || !second_pass)
-				continue;
+			rc = -EINVAL;
+			break;
 		}
 
 		rc = ptrace_modify_breakpoint(bp, len, type, tsk, disabled);
 		if (rc)
 			break;
 	}
-	/*
-	 * Make a second pass to free the remaining unused breakpoints
-	 * or to restore the original breakpoints if an error occurred.
-	 */
-	if (!second_pass) {
-		second_pass = 1;
-		if (rc < 0) {
-			orig_ret = rc;
-			data = old_dr7;
-		}
+
+	/* Restore if the first pass failed, second_pass shouldn't fail. */
+	if (rc && !WARN_ON(second_pass)) {
+		ret = rc;
+		data = old_dr7;
+		second_pass = true;
 		goto restore;
 	}
 
-	return orig_ret < 0 ? orig_ret : rc;
+	return ret;
 }
 
 /*
-- 
1.5.5.1

[PATCH 07/13] ptrace/x86: dont delay "disable" till second pass in ptrace_write_dr7()

[Oleg Nesterov]

ptrace_write_dr7() skips ptrace_modify_breakpoint(disabled => true)
unless second_pass, this buys nothing but complicates the code and
means that we always do the main loop twice even if "disabled" was
never true.

The comment says:

	Don't unregister the breakpoints right-away,
	unless all register_user_hw_breakpoint()
	requests have succeeded.

Firstly, we do not do register_user_hw_breakpoint(), it was removed
by 24f1e32c "hw-breakpoints: Rewrite the hw-breakpoints layer on top
of perf events".

We are going to restore register_user_hw_breakpoint() (see the next
patch) but this doesn't matter, after 44234adc "hw-breakpoints: Modify
breakpoints without unregistering them" perf_event_disable() can not
hurt, hw_breakpoint_del() does not free the slot.

Remove the "second_pass" check from the main loop and simplify the
code. Since we have to check "bp != NULL" anyway, the patch also
removes the same check in ptrace_modify_breakpoint() and moves the
comment into ptrace_write_dr7().

With this patch the second pass is only needed to restore the saved
old_dr7. This should never fail, so the patch adds WARN_ON() to catch
the potential problems as Frederic suggested.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
---
 arch/x86/kernel/ptrace.c |   53 +++++++++++++++++----------------------------
 1 files changed, 20 insertions(+), 33 deletions(-)

diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 0649f16..98b0a2c 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -609,14 +609,6 @@ ptrace_modify_breakpoint(struct perf_event *bp, int len, int type,
 	int gen_len, gen_type;
 	struct perf_event_attr attr;
 
-	/*
-	 * We should have at least an inactive breakpoint at this
-	 * slot. It means the user is writing dr7 without having
-	 * written the address register first
-	 */
-	if (!bp)
-		return -EINVAL;
-
 	err = arch_bp_generic_fields(len, type, &gen_len, &gen_type);
 	if (err)
 		return err;
@@ -634,52 +626,47 @@ ptrace_modify_breakpoint(struct perf_event *bp, int len, int type,
  */
 static int ptrace_write_dr7(struct task_struct *tsk, unsigned long data)
 {
-	struct thread_struct *thread = &(tsk->thread);
+	struct thread_struct *thread = &tsk->thread;
 	unsigned long old_dr7;
-	int i, orig_ret = 0, rc = 0;
-	int second_pass = 0;
+	bool second_pass = false;
+	int i, rc, ret = 0;
 
 	data &= ~DR_CONTROL_RESERVED;
 	old_dr7 = ptrace_get_dr7(thread->ptrace_bps);
+
 restore:
-	/*
-	 * Loop through all the hardware breakpoints, making the
-	 * appropriate changes to each.
-	 */
+	rc = 0;
 	for (i = 0; i < HBP_NUM; i++) {
 		unsigned len, type;
 		bool disabled = !decode_dr7(data, i, &len, &type);
 		struct perf_event *bp = thread->ptrace_bps[i];
 
-		if (disabled) {
+		if (!bp) {
+			if (disabled)
+				continue;
 			/*
-			 * Don't unregister the breakpoints right-away, unless
-			 * all register_user_hw_breakpoint() requests have
-			 * succeeded. This prevents any window of opportunity
-			 * for debug register grabbing by other users.
+			 * We should have at least an inactive breakpoint at
+			 * this slot. It means the user is writing dr7 without
+			 * having written the address register first.
 			 */
-			if (!bp || !second_pass)
-				continue;
+			rc = -EINVAL;
+			break;
 		}
 
 		rc = ptrace_modify_breakpoint(bp, len, type, tsk, disabled);
 		if (rc)
 			break;
 	}
-	/*
-	 * Make a second pass to free the remaining unused breakpoints
-	 * or to restore the original breakpoints if an error occurred.
-	 */
-	if (!second_pass) {
-		second_pass = 1;
-		if (rc < 0) {
-			orig_ret = rc;
-			data = old_dr7;
-		}
+
+	/* Restore if the first pass failed, second_pass shouldn't fail. */
+	if (rc && !WARN_ON(second_pass)) {
+		ret = rc;
+		data = old_dr7;
+		second_pass = true;
 		goto restore;
 	}
 
-	return orig_ret < 0 ? orig_ret : rc;
+	return ret;
 }
 
 /*
-- 
1.5.5.1

[PATCH 08/13] ptrace/x86: introduce ptrace_register_breakpoint()

[Oleg Nesterov]

No functional changes, preparation.

Extract the "register breakpoint" code from ptrace_get_debugreg()
into the new/generic helper, ptrace_register_breakpoint(). It will
have more users.

The patch also adds another simple helper, ptrace_fill_bp_fields(),
to factor out the arch_bp_generic_fields() logic in register/modify.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
---
 arch/x86/kernel/ptrace.c |   86 ++++++++++++++++++++++++++-------------------
 1 files changed, 50 insertions(+), 36 deletions(-)

diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 98b0a2c..0526368 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -601,22 +601,48 @@ static unsigned long ptrace_get_dr7(struct perf_event *bp[])
 	return dr7;
 }
 
-static int
-ptrace_modify_breakpoint(struct perf_event *bp, int len, int type,
-			 struct task_struct *tsk, int disabled)
+static int ptrace_fill_bp_fields(struct perf_event_attr *attr,
+					int len, int type, bool disabled)
+{
+	int err, bp_len, bp_type;
+
+	err = arch_bp_generic_fields(len, type, &bp_len, &bp_type);
+	if (!err) {
+		attr->bp_len = bp_len;
+		attr->bp_type = bp_type;
+		attr->disabled = disabled;
+	}
+
+	return err;
+}
+
+static struct perf_event *
+ptrace_register_breakpoint(struct task_struct *tsk, int len, int type,
+				unsigned long addr, bool disabled)
 {
-	int err;
-	int gen_len, gen_type;
 	struct perf_event_attr attr;
+	int err;
+
+	ptrace_breakpoint_init(&attr);
+	attr.bp_addr = addr;
 
-	err = arch_bp_generic_fields(len, type, &gen_len, &gen_type);
+	err = ptrace_fill_bp_fields(&attr, len, type, disabled);
 	if (err)
-		return err;
+		return ERR_PTR(err);
+
+	return register_user_hw_breakpoint(&attr, ptrace_triggered,
+						 NULL, tsk);
+}
 
-	attr = bp->attr;
-	attr.bp_len = gen_len;
-	attr.bp_type = gen_type;
-	attr.disabled = disabled;
+static int ptrace_modify_breakpoint(struct perf_event *bp, int len, int type,
+					int disabled)
+{
+	struct perf_event_attr attr = bp->attr;
+	int err;
+
+	err = ptrace_fill_bp_fields(&attr, len, type, disabled);
+	if (err)
+		return err;
 
 	return modify_user_hw_breakpoint(bp, &attr);
 }
@@ -653,7 +679,7 @@ restore:
 			break;
 		}
 
-		rc = ptrace_modify_breakpoint(bp, len, type, tsk, disabled);
+		rc = ptrace_modify_breakpoint(bp, len, type, disabled);
 		if (rc)
 			break;
 	}
@@ -693,26 +719,14 @@ static unsigned long ptrace_get_debugreg(struct task_struct *tsk, int n)
 static int ptrace_set_breakpoint_addr(struct task_struct *tsk, int nr,
 				      unsigned long addr)
 {
-	struct perf_event *bp;
 	struct thread_struct *t = &tsk->thread;
-	struct perf_event_attr attr;
+	struct perf_event *bp = t->ptrace_bps[nr];
 	int err = 0;
 
-	if (!t->ptrace_bps[nr]) {
-		ptrace_breakpoint_init(&attr);
-		/*
-		 * Put stub len and type to register (reserve) an inactive but
-		 * correct bp
-		 */
-		attr.bp_addr = addr;
-		attr.bp_len = HW_BREAKPOINT_LEN_1;
-		attr.bp_type = HW_BREAKPOINT_W;
-		attr.disabled = 1;
-
-		bp = register_user_hw_breakpoint(&attr, ptrace_triggered,
-						 NULL, tsk);
-
+	if (!bp) {
 		/*
+		 * Put stub len and type to create an inactive but correct bp.
+		 *
 		 * CHECKME: the previous code returned -EIO if the addr wasn't
 		 * a valid task virtual addr. The new one will return -EINVAL in
 		 *  this case.
@@ -721,20 +735,20 @@ static int ptrace_set_breakpoint_addr(struct task_struct *tsk, int nr,
 		 * writing for the user. And anyway this is the previous
 		 * behaviour.
 		 */
-		if (IS_ERR(bp)) {
+		bp = ptrace_register_breakpoint(tsk,
+				X86_BREAKPOINT_LEN_1, X86_BREAKPOINT_WRITE,
+				addr, true);
+		if (IS_ERR(bp))
 			err = PTR_ERR(bp);
-			goto out;
-		}
-
-		t->ptrace_bps[nr] = bp;
+		else
+			t->ptrace_bps[nr] = bp;
 	} else {
-		bp = t->ptrace_bps[nr];
+		struct perf_event_attr attr = bp->attr;
 
-		attr = bp->attr;
 		attr.bp_addr = addr;
 		err = modify_user_hw_breakpoint(bp, &attr);
 	}
-out:
+
 	return err;
 }
 
-- 
1.5.5.1

[PATCH 08/13] ptrace/x86: introduce ptrace_register_breakpoint()

[Oleg Nesterov]

No functional changes, preparation.

Extract the "register breakpoint" code from ptrace_get_debugreg()
into the new/generic helper, ptrace_register_breakpoint(). It will
have more users.

The patch also adds another simple helper, ptrace_fill_bp_fields(),
to factor out the arch_bp_generic_fields() logic in register/modify.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
---
 arch/x86/kernel/ptrace.c |   86 ++++++++++++++++++++++++++-------------------
 1 files changed, 50 insertions(+), 36 deletions(-)

diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 98b0a2c..0526368 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -601,22 +601,48 @@ static unsigned long ptrace_get_dr7(struct perf_event *bp[])
 	return dr7;
 }
 
-static int
-ptrace_modify_breakpoint(struct perf_event *bp, int len, int type,
-			 struct task_struct *tsk, int disabled)
+static int ptrace_fill_bp_fields(struct perf_event_attr *attr,
+					int len, int type, bool disabled)
+{
+	int err, bp_len, bp_type;
+
+	err = arch_bp_generic_fields(len, type, &bp_len, &bp_type);
+	if (!err) {
+		attr->bp_len = bp_len;
+		attr->bp_type = bp_type;
+		attr->disabled = disabled;
+	}
+
+	return err;
+}
+
+static struct perf_event *
+ptrace_register_breakpoint(struct task_struct *tsk, int len, int type,
+				unsigned long addr, bool disabled)
 {
-	int err;
-	int gen_len, gen_type;
 	struct perf_event_attr attr;
+	int err;
+
+	ptrace_breakpoint_init(&attr);
+	attr.bp_addr = addr;
 
-	err = arch_bp_generic_fields(len, type, &gen_len, &gen_type);
+	err = ptrace_fill_bp_fields(&attr, len, type, disabled);
 	if (err)
-		return err;
+		return ERR_PTR(err);
+
+	return register_user_hw_breakpoint(&attr, ptrace_triggered,
+						 NULL, tsk);
+}
 
-	attr = bp->attr;
-	attr.bp_len = gen_len;
-	attr.bp_type = gen_type;
-	attr.disabled = disabled;
+static int ptrace_modify_breakpoint(struct perf_event *bp, int len, int type,
+					int disabled)
+{
+	struct perf_event_attr attr = bp->attr;
+	int err;
+
+	err = ptrace_fill_bp_fields(&attr, len, type, disabled);
+	if (err)
+		return err;
 
 	return modify_user_hw_breakpoint(bp, &attr);
 }
@@ -653,7 +679,7 @@ restore:
 			break;
 		}
 
-		rc = ptrace_modify_breakpoint(bp, len, type, tsk, disabled);
+		rc = ptrace_modify_breakpoint(bp, len, type, disabled);
 		if (rc)
 			break;
 	}
@@ -693,26 +719,14 @@ static unsigned long ptrace_get_debugreg(struct task_struct *tsk, int n)
 static int ptrace_set_breakpoint_addr(struct task_struct *tsk, int nr,
 				      unsigned long addr)
 {
-	struct perf_event *bp;
 	struct thread_struct *t = &tsk->thread;
-	struct perf_event_attr attr;
+	struct perf_event *bp = t->ptrace_bps[nr];
 	int err = 0;
 
-	if (!t->ptrace_bps[nr]) {
-		ptrace_breakpoint_init(&attr);
-		/*
-		 * Put stub len and type to register (reserve) an inactive but
-		 * correct bp
-		 */
-		attr.bp_addr = addr;
-		attr.bp_len = HW_BREAKPOINT_LEN_1;
-		attr.bp_type = HW_BREAKPOINT_W;
-		attr.disabled = 1;
-
-		bp = register_user_hw_breakpoint(&attr, ptrace_triggered,
-						 NULL, tsk);
-
+	if (!bp) {
 		/*
+		 * Put stub len and type to create an inactive but correct bp.
+		 *
 		 * CHECKME: the previous code returned -EIO if the addr wasn't
 		 * a valid task virtual addr. The new one will return -EINVAL in
 		 *  this case.
@@ -721,20 +735,20 @@ static int ptrace_set_breakpoint_addr(struct task_struct *tsk, int nr,
 		 * writing for the user. And anyway this is the previous
 		 * behaviour.
 		 */
-		if (IS_ERR(bp)) {
+		bp = ptrace_register_breakpoint(tsk,
+				X86_BREAKPOINT_LEN_1, X86_BREAKPOINT_WRITE,
+				addr, true);
+		if (IS_ERR(bp))
 			err = PTR_ERR(bp);
-			goto out;
-		}
-
-		t->ptrace_bps[nr] = bp;
+		else
+			t->ptrace_bps[nr] = bp;
 	} else {
-		bp = t->ptrace_bps[nr];
+		struct perf_event_attr attr = bp->attr;
 
-		attr = bp->attr;
 		attr.bp_addr = addr;
 		err = modify_user_hw_breakpoint(bp, &attr);
 	}
-out:
+
 	return err;
 }
 
-- 
1.5.5.1

[PATCH 09/13] ptrace/x86: ptrace_write_dr7() should create bp if !disabled

[Oleg Nesterov]

24f1e32c "hw-breakpoints: Rewrite the hw-breakpoints layer on top
of perf events" introduced the minor regression. Before this commit

	PTRACE_POKEUSER DR7, enableDR0
	PTRACE_POKEUSER DR0, address

was perfectly valid, now PTRACE_POKEUSER(DR7) fails if DR0 was not
previously initialized by PTRACE_POKEUSER(DR0).

Change ptrace_write_dr7() to do ptrace_register_breakpoint(addr => 0)
if !bp && !disabled. This fixes watchpoint-zeroaddr from ptrace-tests,
see https://bugzilla.redhat.com/show_bug.cgi?id=660204.

Reported-by: Jan Kratochvil <jan.kratochvil@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
---
 arch/x86/kernel/ptrace.c |   17 ++++++++++-------
 1 files changed, 10 insertions(+), 7 deletions(-)

diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 0526368..5c387b3 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -670,13 +670,16 @@ restore:
 		if (!bp) {
 			if (disabled)
 				continue;
-			/*
-			 * We should have at least an inactive breakpoint at
-			 * this slot. It means the user is writing dr7 without
-			 * having written the address register first.
-			 */
-			rc = -EINVAL;
-			break;
+
+			bp = ptrace_register_breakpoint(tsk,
+					len, type, 0, disabled);
+			if (IS_ERR(bp)) {
+				rc = PTR_ERR(bp);
+				break;
+			}
+
+			thread->ptrace_bps[i] = bp;
+			continue;
 		}
 
 		rc = ptrace_modify_breakpoint(bp, len, type, disabled);
-- 
1.5.5.1

[PATCH 09/13] ptrace/x86: ptrace_write_dr7() should create bp if !disabled

[Oleg Nesterov]

24f1e32c "hw-breakpoints: Rewrite the hw-breakpoints layer on top
of perf events" introduced the minor regression. Before this commit

	PTRACE_POKEUSER DR7, enableDR0
	PTRACE_POKEUSER DR0, address

was perfectly valid, now PTRACE_POKEUSER(DR7) fails if DR0 was not
previously initialized by PTRACE_POKEUSER(DR0).

Change ptrace_write_dr7() to do ptrace_register_breakpoint(addr => 0)
if !bp && !disabled. This fixes watchpoint-zeroaddr from ptrace-tests,
see https://bugzilla.redhat.com/show_bug.cgi?id=660204.

Reported-by: Jan Kratochvil <jan.kratochvil@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
---
 arch/x86/kernel/ptrace.c |   17 ++++++++++-------
 1 files changed, 10 insertions(+), 7 deletions(-)

diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 0526368..5c387b3 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -670,13 +670,16 @@ restore:
 		if (!bp) {
 			if (disabled)
 				continue;
-			/*
-			 * We should have at least an inactive breakpoint at
-			 * this slot. It means the user is writing dr7 without
-			 * having written the address register first.
-			 */
-			rc = -EINVAL;
-			break;
+
+			bp = ptrace_register_breakpoint(tsk,
+					len, type, 0, disabled);
+			if (IS_ERR(bp)) {
+				rc = PTR_ERR(bp);
+				break;
+			}
+
+			thread->ptrace_bps[i] = bp;
+			continue;
 		}
 
 		rc = ptrace_modify_breakpoint(bp, len, type, disabled);
-- 
1.5.5.1

[PATCH 10/13] ptrace/x86: cleanup ptrace_set_debugreg()

[Oleg Nesterov]

ptrace_set_debugreg() is trivial but looks horrible. Kill the
unnecessary goto's and return's to cleanup the code.

This matches ptrace_get_debugreg() which also needs the trivial
whitespace cleanups.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
---
 arch/x86/kernel/ptrace.c |   26 ++++++++------------------
 1 files changed, 8 insertions(+), 18 deletions(-)

diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 5c387b3..7461f50 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -703,7 +703,7 @@ restore:
  */
 static unsigned long ptrace_get_debugreg(struct task_struct *tsk, int n)
 {
-	struct thread_struct *thread = &(tsk->thread);
+	struct thread_struct *thread = &tsk->thread;
 	unsigned long val = 0;
 
 	if (n < HBP_NUM) {
@@ -713,7 +713,7 @@ static unsigned long ptrace_get_debugreg(struct task_struct *tsk, int n)
 			val = bp->hw.info.address;
 	} else if (n == 6) {
 		val = thread->debugreg6;
-	 } else if (n == 7) {
+	} else if (n == 7) {
 		val = thread->ptrace_dr7;
 	}
 	return val;
@@ -761,30 +761,20 @@ static int ptrace_set_breakpoint_addr(struct task_struct *tsk, int nr,
 static int ptrace_set_debugreg(struct task_struct *tsk, int n,
 			       unsigned long val)
 {
-	struct thread_struct *thread = &(tsk->thread);
-	int rc = 0;
-
+	struct thread_struct *thread = &tsk->thread;
 	/* There are no DR4 or DR5 registers */
-	if (n == 4 || n == 5)
-		return -EIO;
+	int rc = -EIO;
 
-	if (n == 6) {
-		thread->debugreg6 = val;
-		goto ret_path;
-	}
 	if (n < HBP_NUM) {
 		rc = ptrace_set_breakpoint_addr(tsk, n, val);
-		if (rc)
-			return rc;
-	}
-	/* All that's left is DR7 */
-	if (n == 7) {
+	} else if (n == 6) {
+		thread->debugreg6 = val;
+		rc = 0;
+	} else if (n == 7) {
 		rc = ptrace_write_dr7(tsk, val);
 		if (!rc)
 			thread->ptrace_dr7 = val;
 	}
-
-ret_path:
 	return rc;
 }
 
-- 
1.5.5.1

[PATCH 10/13] ptrace/x86: cleanup ptrace_set_debugreg()

[Oleg Nesterov]

ptrace_set_debugreg() is trivial but looks horrible. Kill the
unnecessary goto's and return's to cleanup the code.

This matches ptrace_get_debugreg() which also needs the trivial
whitespace cleanups.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
---
 arch/x86/kernel/ptrace.c |   26 ++++++++------------------
 1 files changed, 8 insertions(+), 18 deletions(-)

diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 5c387b3..7461f50 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -703,7 +703,7 @@ restore:
  */
 static unsigned long ptrace_get_debugreg(struct task_struct *tsk, int n)
 {
-	struct thread_struct *thread = &(tsk->thread);
+	struct thread_struct *thread = &tsk->thread;
 	unsigned long val = 0;
 
 	if (n < HBP_NUM) {
@@ -713,7 +713,7 @@ static unsigned long ptrace_get_debugreg(struct task_struct *tsk, int n)
 			val = bp->hw.info.address;
 	} else if (n == 6) {
 		val = thread->debugreg6;
-	 } else if (n == 7) {
+	} else if (n == 7) {
 		val = thread->ptrace_dr7;
 	}
 	return val;
@@ -761,30 +761,20 @@ static int ptrace_set_breakpoint_addr(struct task_struct *tsk, int nr,
 static int ptrace_set_debugreg(struct task_struct *tsk, int n,
 			       unsigned long val)
 {
-	struct thread_struct *thread = &(tsk->thread);
-	int rc = 0;
-
+	struct thread_struct *thread = &tsk->thread;
 	/* There are no DR4 or DR5 registers */
-	if (n == 4 || n == 5)
-		return -EIO;
+	int rc = -EIO;
 
-	if (n == 6) {
-		thread->debugreg6 = val;
-		goto ret_path;
-	}
 	if (n < HBP_NUM) {
 		rc = ptrace_set_breakpoint_addr(tsk, n, val);
-		if (rc)
-			return rc;
-	}
-	/* All that's left is DR7 */
-	if (n == 7) {
+	} else if (n == 6) {
+		thread->debugreg6 = val;
+		rc = 0;
+	} else if (n == 7) {
 		rc = ptrace_write_dr7(tsk, val);
 		if (!rc)
 			thread->ptrace_dr7 = val;
 	}
-
-ret_path:
 	return rc;
 }
 
-- 
1.5.5.1

[PATCH 11/13] ptrace: PTRACE_DETACH should do flush_ptrace_hw_breakpoint(child)

[Oleg Nesterov]

Change ptrace_detach() to call flush_ptrace_hw_breakpoint(child).
This frees the slots for non-ptrace PERF_TYPE_BREAKPOINT users, and
this ensures that the tracee won't be killed by SIGTRAP triggered by
the active breakpoints.

Test-case:

	unsigned long encode_dr7(int drnum, int enable, unsigned int type, unsigned int len)
	{
		unsigned long dr7;

		dr7 = ((len | type) & 0xf)
			<< (DR_CONTROL_SHIFT + drnum * DR_CONTROL_SIZE);
		if (enable)
			dr7 |= (DR_GLOBAL_ENABLE << (drnum * DR_ENABLE_SIZE));

		return dr7;
	}

	int write_dr(int pid, int dr, unsigned long val)
	{
		return ptrace(PTRACE_POKEUSER, pid,
				offsetof (struct user, u_debugreg[dr]),
				val);
	}

	void func(void)
	{
	}

	int main(void)
	{
		int pid, stat;
		unsigned long dr7;

		pid = fork();
		if (!pid) {
			assert(ptrace(PTRACE_TRACEME, 0,0,0) == 0);
			kill(getpid(), SIGHUP);

			func();
			return 0x13;
		}

		assert(pid == waitpid(-1, &stat, 0));
		assert(WSTOPSIG(stat) == SIGHUP);

		assert(write_dr(pid, 0, (long)func) == 0);
		dr7 = encode_dr7(0, 1, DR_RW_EXECUTE, DR_LEN_1);
		assert(write_dr(pid, 7, dr7) == 0);

		assert(ptrace(PTRACE_DETACH, pid, 0,0) == 0);
		assert(pid == waitpid(-1, &stat, 0));
		assert(stat == 0x1300);

		return 0;
	}

Before this patch the child is killed after PTRACE_DETACH.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
---
 kernel/ptrace.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 8cc170b..0ea7f22 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -469,6 +469,7 @@ static int ptrace_detach(struct task_struct *child, unsigned int data)
 	/* Architecture-specific hardware disable .. */
 	ptrace_disable(child);
 	clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+	flush_ptrace_hw_breakpoint(child);
 
 	write_lock_irq(&tasklist_lock);
 	/*
-- 
1.5.5.1

Re: [PATCH 11/13] ptrace: PTRACE_DETACH should do flush_ptrace_hw_breakpoint(child)

[Felipe Contreras]

On Mon, May 13, 2013 at 10:17 AM, Oleg Nesterov <oleg@redhat.com> wrote:
> Change ptrace_detach() to call flush_ptrace_hw_breakpoint(child).
> This frees the slots for non-ptrace PERF_TYPE_BREAKPOINT users, and
> this ensures that the tracee won't be killed by SIGTRAP triggered by
> the active breakpoints.

There is something wrong with this patch. I've bisected an issue I've
seen in v3.11-rcx kernels while running Starcraft II through wine,
it's crashes 100% of the time, I revert this patch, and there's no
crash any more.

-- 
Felipe Contreras

[PATCH 12/13] ptrace/x86: flush_ptrace_hw_breakpoint() shoule clear the virtual debug registers

[Oleg Nesterov]

flush_ptrace_hw_breakpoint() destroys the counters set by ptrace, but
"leaks" ->debugreg6 and ->ptrace_dr7.

The problem is minor, but still it doesn't look right and flush_thread()
did this until 66cb5917. Now that PTRACE_DETACH does flush_ too this makes
even more sense.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
---
 arch/x86/kernel/hw_breakpoint.c |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/arch/x86/kernel/hw_breakpoint.c b/arch/x86/kernel/hw_breakpoint.c
index 02f0763..f66ff16 100644
--- a/arch/x86/kernel/hw_breakpoint.c
+++ b/arch/x86/kernel/hw_breakpoint.c
@@ -393,6 +393,9 @@ void flush_ptrace_hw_breakpoint(struct task_struct *tsk)
 		unregister_hw_breakpoint(t->ptrace_bps[i]);
 		t->ptrace_bps[i] = NULL;
 	}
+
+	t->debugreg6 = 0;
+	t->ptrace_dr7 = 0;
 }
 
 void hw_breakpoint_restore(void)
-- 
1.5.5.1

[PATCH 13/13] x86: kill TIF_DEBUG

[Oleg Nesterov]

Because it is not used.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
---
 arch/x86/include/asm/thread_info.h |    4 +---
 1 files changed, 1 insertions(+), 3 deletions(-)

diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index a1df6e8..2781119 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -89,7 +89,6 @@ struct thread_info {
 #define TIF_FORK		18	/* ret_from_fork */
 #define TIF_NOHZ		19	/* in adaptive nohz mode */
 #define TIF_MEMDIE		20	/* is terminating due to OOM killer */
-#define TIF_DEBUG		21	/* uses debug registers */
 #define TIF_IO_BITMAP		22	/* uses I/O bitmap */
 #define TIF_FORCED_TF		24	/* true if TF in eflags artificially */
 #define TIF_BLOCKSTEP		25	/* set when we want DEBUGCTLMSR_BTF */
@@ -113,7 +112,6 @@ struct thread_info {
 #define _TIF_IA32		(1 << TIF_IA32)
 #define _TIF_FORK		(1 << TIF_FORK)
 #define _TIF_NOHZ		(1 << TIF_NOHZ)
-#define _TIF_DEBUG		(1 << TIF_DEBUG)
 #define _TIF_IO_BITMAP		(1 << TIF_IO_BITMAP)
 #define _TIF_FORCED_TF		(1 << TIF_FORCED_TF)
 #define _TIF_BLOCKSTEP		(1 << TIF_BLOCKSTEP)
@@ -154,7 +152,7 @@ struct thread_info {
 	(_TIF_IO_BITMAP|_TIF_NOTSC|_TIF_BLOCKSTEP)
 
 #define _TIF_WORK_CTXSW_PREV (_TIF_WORK_CTXSW|_TIF_USER_RETURN_NOTIFY)
-#define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW|_TIF_DEBUG)
+#define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW)
 
 #define PREEMPT_ACTIVE		0x10000000
 
-- 
1.5.5.1

[PATCH 13/13] x86: kill TIF_DEBUG

[Oleg Nesterov]

Because it is not used.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
---
 arch/x86/include/asm/thread_info.h |    4 +---
 1 files changed, 1 insertions(+), 3 deletions(-)

diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index a1df6e8..2781119 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -89,7 +89,6 @@ struct thread_info {
 #define TIF_FORK		18	/* ret_from_fork */
 #define TIF_NOHZ		19	/* in adaptive nohz mode */
 #define TIF_MEMDIE		20	/* is terminating due to OOM killer */
-#define TIF_DEBUG		21	/* uses debug registers */
 #define TIF_IO_BITMAP		22	/* uses I/O bitmap */
 #define TIF_FORCED_TF		24	/* true if TF in eflags artificially */
 #define TIF_BLOCKSTEP		25	/* set when we want DEBUGCTLMSR_BTF */
@@ -113,7 +112,6 @@ struct thread_info {
 #define _TIF_IA32		(1 << TIF_IA32)
 #define _TIF_FORK		(1 << TIF_FORK)
 #define _TIF_NOHZ		(1 << TIF_NOHZ)
-#define _TIF_DEBUG		(1 << TIF_DEBUG)
 #define _TIF_IO_BITMAP		(1 << TIF_IO_BITMAP)
 #define _TIF_FORCED_TF		(1 << TIF_FORCED_TF)
 #define _TIF_BLOCKSTEP		(1 << TIF_BLOCKSTEP)
@@ -154,7 +152,7 @@ struct thread_info {
 	(_TIF_IO_BITMAP|_TIF_NOTSC|_TIF_BLOCKSTEP)
 
 #define _TIF_WORK_CTXSW_PREV (_TIF_WORK_CTXSW|_TIF_USER_RETURN_NOTIFY)
-#define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW|_TIF_DEBUG)
+#define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW)
 
 #define PREEMPT_ACTIVE		0x10000000
 
-- 
1.5.5.1